Post here successfully job with Z3X-BOX Samsung (2018-2022) - Page 117 - GSM-Forum

ghostking · 04-07-2021, 12:18

j700h patch cert done

***Braycel*** · 04-07-2021, 14:30

Operation: Flash
Selected model: SM-A505G
Software version: 42.4

File analysis... OK
Total file size: 0x1A7B21D0A (6779 Mb)
Searching USB Flash interface... COM10 detected
Setup connection... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending sboot.bin.lz4... OK
Sending param.bin.lz4... OK
Sending up_param.bin.lz4... OK
Sending cm.bin.lz4... OK
Sending keystorage.bin.lz4... OK
Sending uh.bin.lz4... OK
Sending vbmeta.img.lz4... OK
Sending boot.img.lz4... OK
Sending recovery.img.lz4... OK
Sending dt.img.lz4... OK
Sending dtbo.img.lz4... OK
Sending system.img.lz4... OK
Sending vendor.img.lz4... OK
Sending userdata.img.lz4... OK
Sending vbmeta.img.lz4... OK
Sending modem.bin.lz4... OK
Sending modem_debug.bin.lz4... OK
Sending cache.img.lz4... OK
Sending omr.img.lz4... OK
Sending product.img.lz4... OK
Flashing done (time - 00:11:24)
Done with Samsung Tool PRO v.42.4

***Braycel*** · 04-07-2021, 14:30

Operation: Flash
Selected model: SM-A505G
Software version: 42.4

File analysis... OK
Total file size: 0x1A7B21D0A (6779 Mb)
Searching USB Flash interface... COM10 detected
Setup connection... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending sboot.bin.lz4... OK
Sending param.bin.lz4... OK
Sending up_param.bin.lz4... OK
Sending cm.bin.lz4... OK
Sending keystorage.bin.lz4... OK
Sending uh.bin.lz4... OK
Sending vbmeta.img.lz4... OK
Sending boot.img.lz4... OK
Sending recovery.img.lz4... OK
Sending dt.img.lz4... OK
Sending dtbo.img.lz4... OK
Sending system.img.lz4... OK
Sending vendor.img.lz4... OK
Sending userdata.img.lz4... OK
Sending vbmeta.img.lz4... OK
Sending modem.bin.lz4... OK
Sending modem_debug.bin.lz4... OK
Sending cache.img.lz4... OK
Sending omr.img.lz4... OK
Sending product.img.lz4... OK
Flashing done (time - 00:11:24)
Done with Samsung Tool PRO v.42.4

yuranc8 · 04-08-2021, 13:04

Code:

Operation: Unlock SPR via Server NEW
Selected model: SM-A205U
Software version: 42.10

Checking Login and Password... OK
Ballance: 10 crd.
You have 10 credit(s) left. This operation takes 10 credits.Continue?  Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-A205U
Android version: 10
PDA version: A205USQS8BTL2
CSC version: A205UOYN8BTL2
Phone version: A205USQS8BTL2
Product code: SM2A205UZKDDSH
CSC country code: USA
CSC sales code: DSH
Carrier ID: BST
Phone SN: R58N409C8TP
IMEI: 354139111807390
HW version: REV0.3
RF cal date: 20200402
Chip name: EXYNOS7904
Modem board: SHANNON327
Security patch: 2021-01-01
Boot Warranty bit: 0
SIM State: ABSENT
Waiting for device to become ready... OK
Reading IMEI... OK
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Checking network lock status... LOCKED
Reading data from phone... OK
Searching server... OK
Waiting for server answer... OK
Writing data to phone... OK
Checking network lock status... UNLOCKED
Rebooting phone... OK
Done with Samsung Tool PRO v.42.10

asad76 · 04-09-2021, 10:05

Samsung G531F Root 5.1.1 and imei Repair With Z3X New Update 42.9
Very very easy method.
One Click Only Done 😍😍
Video prof

https://youtube.com/watch?v=3B18gk2iY44&feature=

neyaz007 · 04-09-2021, 12:49

UNLOCK INSTRUCTIONS:
To read security codes using sever:
Knox warranty does not matter.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server
Selected model: SM-A013G
Software version: 42.10

Checking Login and Password... OK
Ballance: 25 crd.
You have 25 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-A013G
Android version: 10
PDA version: A013GXXS2AUA3
CSC version: A013GOJM2AUA3
Phone version: A013GXXS2AUA3
Product code: SM-A013GZKDKSA
CSC country code: KSA
CSC sales code: KSA
Carrier ID: KSA
Phone SN: R58R23RL7JY
IMEI: 352287563663274
HW version: REV0.2
RF cal date: 20210222
Chip name: MT6739
Modem board: MT6739
Security patch: 2021-01-01
SIM State: REGIONAL_LOCKED,ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung modem... detected COM25
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Ramdump interface... COM6 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 51802694
NET lock: 00000000
SUB lock: 00000000
SP lock: 00000000
CP lock: 15157519
For check lock status: *#7465625#

Done with Samsung Tool PRO v.42.10

Trapbay · 04-09-2021, 20:05

SPRINT G975U UNLOCK DONE

Checking Login and Password... OK
Ballance: 32 crd.
You have 32 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G975U
Android version: 11
PDA version: G975USQS4FUA1
CSC version: G975UOYN4FUA1
Phone version: G975USQS4FUA1
Product code: SM-G975UZBASPR
CSC country code: USA
CSC sales code: SPR
Carrier ID: SPR
Phone SN: R58M22Z5N8X
IMEI: 352695100xxxxxxx
HW version: REV1.0
RF cal date: 2019.02.20
Chip name: SM8150
Modem board: SM8150
Security patch: 2021-02-01
Boot Warranty bit: 0
SIM State: CARD_IO_ERROR
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Reading IMEI... OK
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Checking network lock status... LOCKED
Reading data from phone... OK
Searching server... OK
Waiting for server answer... OK
Writing data to phone... OK
Checking network lock status... UNLOCKED
Debranding phone to XAA... OK
Rebooting phone... OK

Done with Samsung Tool PRO v.42.10

Trapbay · 04-09-2021, 20:10

SPRINT G975U UNLOCK DONE

Checking Login and Password... OK
Ballance: 32 crd.
You have 32 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G975U
Android version: 11
PDA version: G975USQS4FUA1
CSC version: G975UOYN4FUA1
Phone version: G975USQS4FUA1
Product code: SM-G975UZBASPR
CSC country code: USA
CSC sales code: SPR
Carrier ID: SPR
Phone SN: R58M22Z5N8X
IMEI: 352695100xxxxxxx
HW version: REV1.0
RF cal date: 2019.02.20
Chip name: SM8150
Modem board: SM8150
Security patch: 2021-02-01
Boot Warranty bit: 0
SIM State: CARD_IO_ERROR
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Reading IMEI... OK
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Checking network lock status... LOCKED
Reading data from phone... OK
Searching server... OK
Waiting for server answer... OK
Writing data to phone... OK
Checking network lock status... UNLOCKED
Debranding phone to XAA... OK
Rebooting phone... OK

Done with Samsung Tool PRO v.42.10

Trapbay · 04-11-2021, 19:11

Checking Login and Password... OK
Ballance: 32 crd.
You have 32 credit(s) left. This operation takes 6 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-N960U
Android version: 10
PDA version: N960USQS5ETH2
CSC version: N960UOYN5ETH2
Phone version: N960USQS5ETH2
Product code: SM2N960UZBATMB
CSC country code: USA
CSC sales code: TMB
Carrier ID: TMB
Phone SN: RF8KB15ALTL
IMEI: 358621093xxxxxx
HW version: REV1.1
RF cal date: 2018.11.09
Chip name: SDM845
Modem board: SDM845
Security patch: 2020-08-01
Boot Warranty bit: 0
SIM State: ABSENT
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM8
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Rebooting to upload... OK
Searching Ramdump interface... COM10 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool PRO v.42.10

Viaraja786 · 04-13-2021, 08:22

what a problem ???

Waiting ADB device... OK
Reading phone info...
Model: SM-G935S
Android version: 8.0.0
PDA version: G935SKSU3ETJ1
CSC version: G935SSKC3ETJ1
Phone version: G935SKSU3ETJ1
Product code:
CSC country code: KOREA
CSC sales code: SKC
Phone SN: R39H603Y9P
IMEI: 35?????????????
HW version: REV0.8
RF cal date: 20160615
Chip name: EXYNOS8890
Modem board: SHANNON335
Security patch: 2020-10-01
Boot Warranty bit: 1
SIM State: READY
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Writing zTool... OK
Initialization zTool... error (1)

Done with Samsung Tool PRO v.42.10

bk.gsm · 04-16-2021, 13:37

Code:

 Operation: Repair
 Selected model: SM-A125F
 Software version: 42.10
 
 Waiting ADB device... OK
 Reading phone info...
 Model: SM-A125F
 Android version: 10
 PDA version: A125FXXU1AUB4
 CSC version: A125FOXM1AUB4
 Phone version: A125FXXU1AUB4
 Product code: SM-A125FZBUSKZ
 CSC country code: Kazakhstan
 CSC sales code: SKZ
 Carrier ID: SKZ
 Phone SN: R58******
 IMEI: 354********
 HW version: MP0.3B
 RF cal date: 20201211
 Chip name: MT6765
 Modem board: MT6765
 Security patch: 2021-02-01
 Boot Warranty bit: 0
 SIM State: LOADED,ABSENT
 Searching server... OK
 Checking server answer... OK
 Initialization zTool Loader... OK
 Running zTool, please wait... OK
 Loading... OK
 Initialization zTool... OK
 Running zTool, please wait... OK
 Executing... OK
 Rebooting phone... OK
 
 Operation: Patch Certificate
 Selected model: SM-A125F
 Software version: 42.10
 
 Waiting ADB device... OK
 Reading phone info...
 Model: SM-A125F
 Android version: 10
 PDA version: A125FXXU1AUB4
 CSC version: A125FOXM1AUB4
 Phone version: A125FXXU1AUB4
 Product code: SM-A125FZBUSKZ
 CSC country code: Kazakhstan
 CSC sales code: SKZ
 Carrier ID: SKZ
 Phone SN: R58*******
 IMEI: 3567*********
 HW version: MP0.3B
 RF cal date: 20201211
 Chip name: MT6765
 Modem board: MT6765
 Security patch: 2021-02-01
 Boot Warranty bit: 0
 SIM State: LOADED,ABSENT
 Searching server... OK
 Checking server answer... OK
 Initialization zTool Loader... OK
 Running zTool, please wait... OK
 Loading... OK
 Initialization zTool... OK
 Running zTool, please wait... OK
 Executing... OK
 Rebooting phone... OK

b.r.

mrsajjad · 04-17-2021, 08:27

A125F IMEI repair without root.

Code:

 Operation: Repair
 Selected model: SM-A125F
 Software version: 42.10
 
 Waiting ADB device... OK
 Reading phone info...
 Model: SM-A125F
 Android version: 10
 PDA version: A125FXXU1AUAG
 CSC version: A125FOJM1AUAG
 Phone version: A125FXXU1AUAG
 Product code: SM-A125FZKGXSG
 CSC country code: UAE
 CSC sales code: XSG
 Carrier ID: XSG
 Phone SN: R58********
 IMEI: 35203**********
 HW version: MP0.3B
 RF cal date: 20201203
 Chip name: MT6765
 Modem board: MT6765
 Security patch: 2021-01-01
 Boot Warranty bit: 0
 SIM State: ABSENT,ABSENT
 Searching server... OK
 Checking server answer... OK
 Initialization zTool Loader... OK
 Running zTool, please wait... OK
 Loading... OK
 Initialization zTool... OK
 Running zTool, please wait... OK
 Executing... OK
 Rebooting phone... OK

Patch Certificate.

Code:

 Operation: Patch Certificate
 Selected model: SM-A125F
 Software version: 42.10
 
 Waiting ADB device... OK
 Reading phone info...
 Model: SM-A125F
 Android version: 10
 PDA version: A125FXXU1AUAG
 CSC version: A125FOJM1AUAG
 Phone version: A125FXXU1AUAG
 Product code: SM-A125FZKGXSG
 CSC country code: UAE
 CSC sales code: XSG
 Carrier ID: XSG
 Phone SN: R58********
 IMEI: 35753**********
 HW version: MP0.3B
 RF cal date: 20201203
 Chip name: MT6765
 Modem board: MT6765
 Security patch: 2021-01-01
 Boot Warranty bit: 0
 SIM State: ABSENT,ABSENT
 Searching server... OK
 Checking server answer... OK
 Initialization zTool Loader... OK
 Running zTool, please wait... OK
 Loading... OK
 Initialization zTool... OK
 Running zTool, please wait... OK
 Executing... OK
 Rebooting phone... OK

IA.MALIK · 04-17-2021, 09:49

Operation: Write CERT
Selected model: SM-G900F
Selected port: COM450 SAMSUNG Mobile USB Serial Port
Software version: 42.10

Checking CERT file... OK
KEY ID: 0478
Waiting ADB device... OK
Reading phone info...
Model: SM-G900F
Android version: 6.0.1
PDA version: G900FXXU1CPF7
CSC version: G900FOJV1CPF1
Phone version: G900FXXU1CPB8
Product code: SM-G900FZKAXFV
CSC country code: UAE
CSC sales code: XSG
Phone SN: R58F50Q1WHL
IMEI:
HW version: MP 0.800
RF cal date: 2014.05.19
Chip name: MSM8974PRO
Modem board: MSM8974PRO
Security patch: 2016-06-01
Boot Warranty bit: 1
Writing AT RIL... OK
Initialization AT RIL... root required
Checking Super user right... true
Initialization AT RIL... OK
Bypass MSL... error (2)
First reset MSL

Done with Samsung Tool PRO v.42.10

IA.MALIK · 04-17-2021, 09:51

Operation: Write CERT
Selected model: SM-G900F
Selected port: COM450 SAMSUNG Mobile USB Serial Port
Software version: 42.10

Checking CERT file... OK
KEY ID: 0478
Waiting ADB device... OK
Reading phone info...
Model: SM-G900F
Android version: 6.0.1
PDA version: G900FXXU1CPF7
CSC version: G900FOJV1CPF1
Phone version: G900FXXU1CPB8
Product code: SM-G900FZKAXFV
CSC country code: UAE
CSC sales code: XSG
Phone SN: R58F50Q1WHL
IMEI:
HW version: MP 0.800
RF cal date: 2014.05.19
Chip name: MSM8974PRO
Modem board: MSM8974PRO
Security patch: 2016-06-01
Boot Warranty bit: 1
Writing AT RIL... OK
Initialization AT RIL... root required
Checking Super user right... true
Initialization AT RIL... OK
Bypass MSL... error (2)
First reset MSL

Done with Samsung Tool PRO v.42.10

kbdaking1 · 04-17-2021, 19:11

Quote:

Originally Posted by starlyn1232

Here is a One-Click Root for help make this guide easier

https://mega.nz/#!11pj3IyT!yRwlgMvwI...MPta2zDsMhcnuc

Pass: Starlyn1232

says its the wrong password

04-07-2021, 14:30	#1742 (permalink)
*Braycel* Super Moderator Join Date: Jul 2008 Location: Villa del rosario/Nsd Colombia Posts: 3,605 Member: 813309 Status: Offline Thanks Meter: 1,912	Operation: Flash Selected model: SM-A505G Software version: 42.4 File analysis... OK Total file size: 0x1A7B21D0A (6779 Mb) Searching USB Flash interface... COM10 detected Setup connection... OK Set PIT file... OK Reading PIT from phone... OK Sending sboot.bin.lz4... OK Sending param.bin.lz4... OK Sending up_param.bin.lz4... OK Sending cm.bin.lz4... OK Sending keystorage.bin.lz4... OK Sending uh.bin.lz4... OK Sending vbmeta.img.lz4... OK Sending boot.img.lz4... OK Sending recovery.img.lz4... OK Sending dt.img.lz4... OK Sending dtbo.img.lz4... OK Sending system.img.lz4... OK Sending vendor.img.lz4... OK Sending userdata.img.lz4... OK Sending vbmeta.img.lz4... OK Sending modem.bin.lz4... OK Sending modem_debug.bin.lz4... OK Sending cache.img.lz4... OK Sending omr.img.lz4... OK Sending product.img.lz4... OK Flashing done (time - 00:11:24) Done with Samsung Tool PRO v.42.4 __________________ Please do not Personal Message me for help or troubleshooting. They will be ignored. Use the forums!

04-07-2021, 14:30	#1743 (permalink)
*Braycel* Super Moderator Join Date: Jul 2008 Location: Villa del rosario/Nsd Colombia Posts: 3,605 Member: 813309 Status: Offline Thanks Meter: 1,912	Operation: Flash Selected model: SM-A505G Software version: 42.4 File analysis... OK Total file size: 0x1A7B21D0A (6779 Mb) Searching USB Flash interface... COM10 detected Setup connection... OK Set PIT file... OK Reading PIT from phone... OK Sending sboot.bin.lz4... OK Sending param.bin.lz4... OK Sending up_param.bin.lz4... OK Sending cm.bin.lz4... OK Sending keystorage.bin.lz4... OK Sending uh.bin.lz4... OK Sending vbmeta.img.lz4... OK Sending boot.img.lz4... OK Sending recovery.img.lz4... OK Sending dt.img.lz4... OK Sending dtbo.img.lz4... OK Sending system.img.lz4... OK Sending vendor.img.lz4... OK Sending userdata.img.lz4... OK Sending vbmeta.img.lz4... OK Sending modem.bin.lz4... OK Sending modem_debug.bin.lz4... OK Sending cache.img.lz4... OK Sending omr.img.lz4... OK Sending product.img.lz4... OK Flashing done (time - 00:11:24) Done with Samsung Tool PRO v.42.4 __________________ Please do not Personal Message me for help or troubleshooting. They will be ignored. Use the forums!

04-09-2021, 10:05	#1745 (permalink)
asad76 Freak Poster Join Date: Jul 2008 Location: PK Posts: 320 Member: 805129 Status: Offline Thanks Meter: 191	Samsung G531F Root 5.1.1 and imei Repair With Z3X New Update 42.9 Samsung G531F Root 5.1.1 and imei Repair With Z3X New Update 42.9 Very very easy method. One Click Only Done 😍😍 Video prof https://youtube.com/watch?v=3B18gk2iY44&feature=

04-09-2021, 12:49	#1746 (permalink)
neyaz007 Freak Poster Join Date: Nov 2016 Location: India Posts: 150 Member: 2650288 Status: Offline Sonork: live:hackb151 Thanks Meter: 153	sm-a013g unlock done UNLOCK INSTRUCTIONS: To read security codes using sever: Knox warranty does not matter. 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Read Codes via server' button, write your login and password in window if it will appear. (Login and password will be saved as default after first input and can be changed in settings.) Operation: Read Codes via Server Selected model: SM-A013G Software version: 42.10 Checking Login and Password... OK Ballance: 25 crd. You have 25 credit(s) left. This operation takes 5 credits.Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-A013G Android version: 10 PDA version: A013GXXS2AUA3 CSC version: A013GOJM2AUA3 Phone version: A013GXXS2AUA3 Product code: SM-A013GZKDKSA CSC country code: KSA CSC sales code: KSA Carrier ID: KSA Phone SN: R58R23RL7JY IMEI: 352287563663274 HW version: REV0.2 RF cal date: 20210222 Chip name: MT6739 Modem board: MT6739 Security patch: 2021-01-01 SIM State: REGIONAL_LOCKED,ABSENT Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Searching Samsung modem... detected COM25 Initialization zTool Loader... OK Running zTool, please wait... OK Loading... OK Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... OK Searching Ramdump interface... COM6 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Freeze code: 51802694 NET lock: 00000000 SUB lock: 00000000 SP lock: 00000000 CP lock: 15157519 For check lock status: *#7465625# Done with Samsung Tool PRO v.42.10

04-09-2021, 20:10	#1748 (permalink)
Trapbay Freak Poster Join Date: Nov 2018 Location: Everywhere Your Not Posts: 499 Member: 2875052 Status: Offline Thanks Meter: 211	Sprint g975u unlock done SPRINT G975U UNLOCK DONE Checking Login and Password... OK Ballance: 32 crd. You have 32 credit(s) left. This operation takes 10 credits.Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-G975U Android version: 11 PDA version: G975USQS4FUA1 CSC version: G975UOYN4FUA1 Phone version: G975USQS4FUA1 Product code: SM-G975UZBASPR CSC country code: USA CSC sales code: SPR Carrier ID: SPR Phone SN: R58M22Z5N8X IMEI: 352695100xxxxxxx HW version: REV1.0 RF cal date: 2019.02.20 Chip name: SM8150 Modem board: SM8150 Security patch: 2021-02-01 Boot Warranty bit: 0 SIM State: CARD_IO_ERROR Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Reading IMEI... OK Initialization zTool Loader... OK Running zTool, please wait... OK Loading... OK Initialization zTool... OK Running zTool, please wait... OK Checking network lock status... LOCKED Reading data from phone... OK Searching server... OK Waiting for server answer... OK Writing data to phone... OK Checking network lock status... UNLOCKED Debranding phone to XAA... OK Rebooting phone... OK Done with Samsung Tool PRO v.42.10

04-07-2021, 12:18	#1741 (permalink)
ghostking Junior Member Join Date: Dec 2020 Location: bd Posts: 30 Member: 2976229 Status: Offline Thanks Meter: 4	j700h patch cert done

04-09-2021, 20:05	#1747 (permalink)
Trapbay Freak Poster Join Date: Nov 2018 Location: Everywhere Your Not Posts: 499 Member: 2875052 Status: Offline Thanks Meter: 211	SPRINT G975U UNLOCK DONE Checking Login and Password... OK Ballance: 32 crd. You have 32 credit(s) left. This operation takes 10 credits.Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-G975U Android version: 11 PDA version: G975USQS4FUA1 CSC version: G975UOYN4FUA1 Phone version: G975USQS4FUA1 Product code: SM-G975UZBASPR CSC country code: USA CSC sales code: SPR Carrier ID: SPR Phone SN: R58M22Z5N8X IMEI: 352695100xxxxxxx HW version: REV1.0 RF cal date: 2019.02.20 Chip name: SM8150 Modem board: SM8150 Security patch: 2021-02-01 Boot Warranty bit: 0 SIM State: CARD_IO_ERROR Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Reading IMEI... OK Initialization zTool Loader... OK Running zTool, please wait... OK Loading... OK Initialization zTool... OK Running zTool, please wait... OK Checking network lock status... LOCKED Reading data from phone... OK Searching server... OK Waiting for server answer... OK Writing data to phone... OK Checking network lock status... UNLOCKED Debranding phone to XAA... OK Rebooting phone... OK Done with Samsung Tool PRO v.42.10

04-11-2021, 19:11	#1749 (permalink)
Trapbay Freak Poster Join Date: Nov 2018 Location: Everywhere Your Not Posts: 499 Member: 2875052 Status: Offline Thanks Meter: 211	N960u unlock done-tmb Checking Login and Password... OK Ballance: 32 crd. You have 32 credit(s) left. This operation takes 6 credits.Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-N960U Android version: 10 PDA version: N960USQS5ETH2 CSC version: N960UOYN5ETH2 Phone version: N960USQS5ETH2 Product code: SM2N960UZBATMB CSC country code: USA CSC sales code: TMB Carrier ID: TMB Phone SN: RF8KB15ALTL IMEI: 358621093xxxxxx HW version: REV1.1 RF cal date: 2018.11.09 Chip name: SDM845 Modem board: SDM845 Security patch: 2020-08-01 Boot Warranty bit: 0 SIM State: ABSENT Waiting for device to become ready... OK Searching Samsung diag port... detected COM8 Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... OK Rebooting to upload... OK Searching Ramdump interface... COM10 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.42.10

04-13-2021, 08:22	#1750 (permalink)
Viaraja786 Freak Poster Join Date: Jan 2016 Location: faisalabad Age: 41 Posts: 116 Member: 2518014 Status: Offline Thanks Meter: 43	what a problem ??? Waiting ADB device... OK Reading phone info... Model: SM-G935S Android version: 8.0.0 PDA version: G935SKSU3ETJ1 CSC version: G935SSKC3ETJ1 Phone version: G935SKSU3ETJ1 Product code: CSC country code: KOREA CSC sales code: SKC Phone SN: R39H603Y9P IMEI: 35????????????? HW version: REV0.8 RF cal date: 20160615 Chip name: EXYNOS8890 Modem board: SHANNON335 Security patch: 2020-10-01 Boot Warranty bit: 1 SIM State: READY Checking Super user right... true Reading NV data... OK Checking NV data... OK Reading data... OK Detecting MODEM... OK Reading MODEM... OK Calculating... OK Writing zTool... OK Initialization zTool... error (1) Done with Samsung Tool PRO v.42.10

04-17-2021, 09:49	#1753 (permalink)
IA.MALIK Registered User Join Date: Dec 2007 Location: STANDERTON SOUTH AFRICA Posts: 52 Member: 657419 Status: Offline Thanks Meter: 5	Operation: Write CERT Selected model: SM-G900F Selected port: COM450 SAMSUNG Mobile USB Serial Port Software version: 42.10 Checking CERT file... OK KEY ID: 0478 Waiting ADB device... OK Reading phone info... Model: SM-G900F Android version: 6.0.1 PDA version: G900FXXU1CPF7 CSC version: G900FOJV1CPF1 Phone version: G900FXXU1CPB8 Product code: SM-G900FZKAXFV CSC country code: UAE CSC sales code: XSG Phone SN: R58F50Q1WHL IMEI: HW version: MP 0.800 RF cal date: 2014.05.19 Chip name: MSM8974PRO Modem board: MSM8974PRO Security patch: 2016-06-01 Boot Warranty bit: 1 Writing AT RIL... OK Initialization AT RIL... root required Checking Super user right... true Initialization AT RIL... OK Bypass MSL... error (2) First reset MSL Done with Samsung Tool PRO v.42.10

04-17-2021, 09:51	#1754 (permalink)
IA.MALIK Registered User Join Date: Dec 2007 Location: STANDERTON SOUTH AFRICA Posts: 52 Member: 657419 Status: Offline Thanks Meter: 5	any help team while i do reset MSL but still error Operation: Write CERT Selected model: SM-G900F Selected port: COM450 SAMSUNG Mobile USB Serial Port Software version: 42.10 Checking CERT file... OK KEY ID: 0478 Waiting ADB device... OK Reading phone info... Model: SM-G900F Android version: 6.0.1 PDA version: G900FXXU1CPF7 CSC version: G900FOJV1CPF1 Phone version: G900FXXU1CPB8 Product code: SM-G900FZKAXFV CSC country code: UAE CSC sales code: XSG Phone SN: R58F50Q1WHL IMEI: HW version: MP 0.800 RF cal date: 2014.05.19 Chip name: MSM8974PRO Modem board: MSM8974PRO Security patch: 2016-06-01 Boot Warranty bit: 1 Writing AT RIL... OK Initialization AT RIL... root required Checking Super user right... true Initialization AT RIL... OK Bypass MSL... error (2) First reset MSL Done with Samsung Tool PRO v.42.10