Post here successfully job with Z3X-BOX Samsung (2018-2022) - Page 96 - GSM-Forum

zaya21 · 03-05-2020, 17:21

thanks team z3x

Operation: Read Codes via Server
Selected model: SM-A207M
Software version: 39.7

Checking Login and Password... OK
Ballance: 30 crd.
You have 30 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-A207M
Android version: 9
PDA version: A207MUBS2ATA1
CSC version: A207MOWF2ATA2
Phone version: A207MUBS2ATA3
Product code: SM-A207MZKADOR
CSC country code: DOMINICAN REPUBLIC
CSC sales code: DOR
Phone SN: R9AN10CLTDJ
IMEI: 35xxxxxxxxxxx
HW version: MP1.0
RF cal date: 2020.01.04
Chip name: SDM450
Modem board: SDM450
Security patch: 2020-01-01
SIM State: ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Samsung diag port... detected COM10
Reading phone info... OK
Reading data from phone... OK
Searching Ramdump interface... COM19 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 41560758
NET lock: 35083026
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.39.7
:RE:RE

qasir_amz · 03-08-2020, 08:55

FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.

Operation: Flash
Selected model: SM-A105FN
Software version: 39.6

File analysis... OK
Total file size: 0x105E35831 (4190 Mb)
Searching USB Flash interface... COM32 detected
Setup connection... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending sboot.bin.lz4... OK
Sending param.bin.lz4... OK
Sending cm.bin.lz4... OK
Sending vbmeta.img.lz4... OK
Sending boot.img.lz4... OK
Sending recovery.img.lz4... OK
Sending dt.img.lz4... OK
Sending dtbo.img.lz4... OK
Sending system.img.lz4... OK
Sending vendor.img.lz4... OK
Sending userdata.img.lz4... OK
Sending vbmeta.img.lz4... OK
Sending modem.bin.lz4... OK
Sending modem_debug.bin.lz4... OK
Sending cache.img.lz4... OK
Sending omr.img.lz4... OK
Sending product.img.lz4... OK
Flashing done (time - 00:04:03)

Done with Samsung Tool PRO v.39.6

Arman111 · 03-08-2020, 09:31

Operation: Unlock
Selected model: SM-G975U
Software version: 39.7

Checking Login and Password... OK
Ballance: 22 crd.
You have 22 credit(s) left. This operation takes 8 credits.Continue? Yes
Waiting for device to become ready... OK
Reading phone info...
Model: SM-G975U
Android version: 9
PDA version: G975USQU1ASD5
CSC version: G975UOYN1ASD5
Phone version: G975USQU1ASD5
Product code: SM-G975UZKASPR
CSC country code: USA
CSC sales code: SPR
Phone SN: R58M256RERT
IMEI: 352695101xxxxxx
HW version: REV1.0
RF cal date: 2019.03.01
Chip name: SM8150
Modem board: SM8150
Security patch: 2019-04-01
Boot Warranty bit: 0
SIM State: ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Carrier ID: SPR
BLOB(IMEI) SIGN: OK
Checking security... OK
Searching server... OK
Waiting for server answer... OK
Calculating... OK
Rebooting phone... OK
Unlock done

qasir_amz · 03-08-2020, 12:55

REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.

Operation: Patch Certificate
Selected model: SM-G955F
Software version: 39.6

Waiting ADB device... OK
Reading phone info...
Model: SM-G955F
Android version: 9
PDA version: G955FXXS5DSF1
CSC version: G955FOXM5DSF1
Phone version: G955FXXS5DSF1
Product code: SM-G955FZKAVOD
CSC country code: Germany
CSC sales code: DBT
Phone SN: RF8JC0FNF7D
IMEI: 3591220xxxxxxxxxx
HW version: MP 0.501
RF cal date: 20171206
Chip name: EXYNOS8895
Modem board: SHANNON355
Security patch: 2019-06-01
Boot Warranty bit: 1
SIM State: ABSENT
Checking Super user right... true
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Searching server... OK
Waiting for server answer... OK
Patching... OK
Rebooting phone... OK

Done with Samsung Tool PRO v.39.6

..::GMSR::.. · 03-09-2020, 14:29

Selected model: E2220
Selected com port: COM12
Selected speed port: 230400
Please, connect phone and press power button 3 seconds
Phone Detected
Use automatic parameters
Phone in TAT MODE
Phone OLD IMEI: 354
Phone SW: E2220XXLK1
Phone CSC: E2220XFVLK1
Phone BT ADDR: 9CE6-E7-A0347E
Phone SN: RV1D30WDKP
Unlock - ok
Elapsed time: 17 second, sw ver: 3.5.0040
-------------------------------------------------------------------------------

Yahia_Sb · 03-12-2020, 11:25

multiomc · 03-13-2020, 19:30

Waiting ADB device... OK
Reading phone info...
Model: SM-J710GN
Android version: 7.0
PDA version: J710GNDXU3BQH6
CSC version: J710GNOLB3BQH6
Phone version: J710GNDXU3BQH2
Product code: SM-J710GZDUXTC
CSC country code: PHILIPPINES
CSC sales code: XTC
Phone SN: RF8HB3F74RV
IMEI: 358447076430082
HW version: MP 0.400
RF cal date: 20161126
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2017-08-01
Boot Warranty bit: 1
SIM State: ABSENT,ABSENT
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Initialization data... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Writing zTool... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data... OK
HWID: F6 06 00 00 00 00 00 00 00 00 00 00 06 55 9C 4C
Calculating... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done
J710GN-CF-ROOT-6.0.1-www.taflish.com
ROOT

qasir_amz · 03-18-2020, 07:25

REPAIR INSTRUCTIONS:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Reboot to...' button and select mode to reboot (download or recovery).

Operation: Patch Certificate
Selected model: SM-G965F
Software version: 39.7

Waiting ADB device... OK
Reading phone info...
Model: SM-G965F
Android version: 9
PDA version: G965FXXU7CSJ1
CSC version: G965FOBE7CSJ3
Phone version: G965FXXU7CSI6
Product code: SM-G965FZKEVOD
CSC country code: UK
CSC sales code: EVR
Phone SN: RF8K722KQQV
IMEI: 35930804xxxxxx
HW version: MP 0.900
RF cal date: 20180720
Chip name: EXYNOS9810
Modem board: SHANNON360
Security patch: 2019-10-01
Boot Warranty bit: 1
SIM State: ABSENT
Checking Super user right... true
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Searching server... OK
Waiting for server answer... OK
Patching... OK
Rebooting phone... OK

Done with Samsung Tool PRO v.39.7

qasir_amz · 03-18-2020, 08:04

UNLOCK INSTRUCTIONS:
New Securiry Type:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button and select 'New Unlock' for direct unlock.
6. Press 'Read codes' button and select 'Read codes New' to read security codes.

Old Securiry Type:
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Unlock' button and select 'Unlock' for direct unlock.
5. Press 'Read codes' button and select 'Read codes' to read security codes.

To read security codes via diagnostic port:
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Press 'Read Codes DIAG' button to read security codes.

To read security codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, select 'Read codes ...' algo,
write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

To reset Google account activation or Samsung reactivation lock:
1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
4. After phone reboot, go to settings and perform factory reset.

To reset Google account activation lock with UART cable:
1. Phone must be powered off
2. Connect the phone to UART cable.
3. Select correct COM port in port settings.
4. Press 'Reset FRP UFS' and follow the instructions in program.

Operation: Unlock
Selected model: SM-G925T
Selected port: COM299 SAMSUNG Mobile USB Serial Port
Software version: 39.7

Waiting ADB device... OK
Reading phone info...
Model: SM-G925T
Android version: 7.0
PDA version: G925TUVS6FRC1
CSC version: G925TTMB6FRC1
Phone version: G925TUVU6ARA1
Product code: SM-G925FZDAVOD
CSC country code: USA
CSC sales code: TMB
Phone SN:
IMEI: 35979706xxxxxxxx
HW version: MP 0.70V
RF cal date: 20151119
Chip name: EXYNOS7420
Modem board: SHANNON333
Security patch: 2018-03-01
Boot Warranty bit: 1
SIM State: NETWORK_LOCKED
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Initialization zTool... OK
Running zTool, please wait... OK
HWID: 88 31 9F B4 B4 04 00 00 00 00 00 00 00 00 00 00
Calculating... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.39.7

qasir_amz · 03-18-2020, 08:08

UNLOCK INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options' for Android 4.0 - 4.1.2 or
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options' in Android 4.2+.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button for direct unlock.

Operation: Unlock
Selected model: SM-T235
Software version: 39.7

Waiting ADB device... OK
Reading phone info...
Model: SM-T235
Android version: 4.4.2
PDA version: T235XXU1AOB2
CSC version: T235OXX1AOB1
Phone version: T235XXU1AOB1
Product code: SM-T235NZWAEVR
CSC country code: UK
CSC sales code: EVR
Phone SN: RF2FB0D8RGK
IMEI: 35350xxxxxxxxxx
HW version: MP 0.300
RF cal date: 20141117
Chip name: EXYNOS3470
Modem board: SS222
Boot Warranty bit: 0
SIM State: READY
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Detected new type of security
Calculating... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.39.7

qasir_amz · 03-18-2020, 08:20

REPAIR INSTRUCTIONS:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Reboot to...' button and select mode to reboot (download or recovery).

Operation: Patch Certificate
Selected model: SM-G532F
Software version: 39.7

Waiting ADB device... OK
Reading phone info...
Model: SM-G532F
Android version: 6.0.1
PDA version: G532FXXU1ARL1
CSC version: G532FOXE1ASA1
Phone version: G532FXXU1ARL1
Product code: SM-G532FZSDSER
CSC country code: Russia
CSC sales code: SER
Phone SN: RZ8K91NMX0Y
IMEI: 35534xxxxxxxxx
HW version: MP 0.300
RF cal date: 20180916
Chip name: MT6737T
Modem board: MT6737T
Security patch: 2018-08-01
Boot Warranty bit: 1
SIM State: READY,ABSENT
Checking Super user right... true
Searching server... OK
Checking server answer... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Preparation of data... OK
Writing data to phone... OK
Rebooting phone... OK

Done with Samsung Tool PRO v.39.7

anrmobile · 03-21-2020, 02:56

Operation: Flash
Selected model: SM-J327P
Software version: 39.7

File analysis... OK
Total file size: 0xD9BBDF40 (3483 Mb)
Searching USB Flash interface... COM29 detected
Setup connection... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending aboot.mbn... OK
Sending sbl1.mbn... OK
Sending rpm.mbn... OK
Sending tz.mbn... OK
Sending devcfg.mbn... OK
Sending NON-HLOS.bin... OK
Sending cmnlib.mbn... OK
Sending keymaster.mbn... OK
Sending lksecapp.mbn... OK
Sending sec.dat... OK
Sending apdp.mbn... OK
Sending msadp.mbn... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img.ext4... OK
Sending persist.img.ext4... OK
Sending modem.bin... OK
Sending adspso.bin... OK
Sending cache.img.ext4... OK
Flashing done (time - 00:06:12)
Done with Samsung Tool PRO v.39.7

anrmobile · 03-21-2020, 06:25

Operation: Unlock
Selected model: SM-N915P
Selected port: COM49 SAMSUNG Mobile USB Serial Port
Software version: 39.7

Reading phone info...
Reading IMEI... OK
IMEI: 990004779575426
Unlocking... OK
Reseting... OK
Unlock done
Done with Samsung Tool PRO v.39.7

GSM AR · 03-21-2020, 08:22

Samsung Galaxy On5 SM-G550T1 Unlock done

Operation: Unlock
Selected model: SM-G550T1
Software version: 39.1

Waiting ADB device... OK
Reading phone info...
Model: SM-G550T1
Android version: 6.0.1
PDA version: G550T1UVS2APL1
CSC version: G550T1TMK2APL1
Phone version: G550TUVS2APL1
Product code: SM2G550TZKATMK
CSC country code: USA
CSC sales code: TMK
Phone SN: RV8HBXXXXXX
IMEI: 35415XXXXXXXXXX
HW version: REV0.4
RF cal date: 20170619
Chip name: EXYNOS3475
Modem board: SHANNON308
Security patch: 2016-11-01
Boot Warranty bit: 1
SIM State: NETWORK_LOCKED
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Modem board: SHANNON308
HWID: 17 FD 98 77 EB BD 3E 54 F3 4A BD 99 2C 4F 76 3F
Calculating... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.39.1

anrmobile · 03-21-2020, 18:24

Operation: Flash
Selected model: SM-N915P
Software version: 39.7

File analysis... OK
Total file size: 0xE8594088 (3717 Mb)
Searching USB Flash interface... COM29 detected
Setup connection... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending aboot.mbn... OK
Sending sbl1.mbn... OK
Sending rpm.mbn... OK
Sending tz.mbn... OK
Sending sdi.mbn... OK
Sending NON-HLOS.bin... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img.ext4... OK
Sending persist.img.ext4... OK
Sending modem.bin... OK
Sending cache.img.ext4... OK
Flashing done (time - 00:06:36)
Done with Samsung Tool PRO v.39.7

03-05-2020, 17:21	#1426 (permalink)
zaya21 Freak Poster Join Date: Jul 2018 Posts: 110 Member: 2851505 Status: Offline Sonork: 100.750600 Thanks Meter: 22	Read Codes via Server samsung SM-A207M successful thanks team z3x Operation: Read Codes via Server Selected model: SM-A207M Software version: 39.7 Checking Login and Password... OK Ballance: 30 crd. You have 30 credit(s) left. This operation takes 5 credits.Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-A207M Android version: 9 PDA version: A207MUBS2ATA1 CSC version: A207MOWF2ATA2 Phone version: A207MUBS2ATA3 Product code: SM-A207MZKADOR CSC country code: DOMINICAN REPUBLIC CSC sales code: DOR Phone SN: R9AN10CLTDJ IMEI: 35xxxxxxxxxxx HW version: MP1.0 RF cal date: 2020.01.04 Chip name: SDM450 Modem board: SDM450 Security patch: 2020-01-01 SIM State: ABSENT Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... OK Searching Samsung diag port... detected COM10 Reading phone info... OK Reading data from phone... OK Searching Ramdump interface... COM19 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Freeze code: 41560758 NET lock: 35083026 SUB lock: 00000000 SP lock: 00000000 CP lock: 00000000 For check lock status: *#7465625# Done with Samsung Tool PRO v.39.7 :RE:RE

03-08-2020, 08:55	#1427 (permalink)
qasir_amz No Life Poster Join Date: Dec 2009 Location: PAKISTAN Posts: 2,107 Member: 1185918 Status: Offline Sonork: 100.1617322 Thanks Meter: 428	A105FN U2 Boot Loop Done Simple Flash FLASH INSTRUCTIONS: 1. Choose correct flash file(s). 2. If you have PIT file chosen, then you must check 'Repartition' option. 3. Check flashing options if needed (Repartition, EFS clear, Boot update). 4. Power on the phone in download mode (turn off phone, press vol.down + home + power). 5. Connect the phone to PC with USB cable, install drivers if needed. 6. Press 'Flash' button. Operation: Flash Selected model: SM-A105FN Software version: 39.6 File analysis... OK Total file size: 0x105E35831 (4190 Mb) Searching USB Flash interface... COM32 detected Setup connection... OK Set PIT file... OK Reading PIT from phone... OK Sending sboot.bin.lz4... OK Sending param.bin.lz4... OK Sending cm.bin.lz4... OK Sending vbmeta.img.lz4... OK Sending boot.img.lz4... OK Sending recovery.img.lz4... OK Sending dt.img.lz4... OK Sending dtbo.img.lz4... OK Sending system.img.lz4... OK Sending vendor.img.lz4... OK Sending userdata.img.lz4... OK Sending vbmeta.img.lz4... OK Sending modem.bin.lz4... OK Sending modem_debug.bin.lz4... OK Sending cache.img.lz4... OK Sending omr.img.lz4... OK Sending product.img.lz4... OK Flashing done (time - 00:04:03) Done with Samsung Tool PRO v.39.6

03-08-2020, 09:31	#1428 (permalink)
Arman111 Major Poster Join Date: Jul 2019 Location: Dhaka,Bangladesh Posts: 37 Member: 2918257 Status: Offline Thanks Meter: 20	G975U Sprint Network Done Operation: Unlock Selected model: SM-G975U Software version: 39.7 Checking Login and Password... OK Ballance: 22 crd. You have 22 credit(s) left. This operation takes 8 credits.Continue? Yes Waiting for device to become ready... OK Reading phone info... Model: SM-G975U Android version: 9 PDA version: G975USQU1ASD5 CSC version: G975UOYN1ASD5 Phone version: G975USQU1ASD5 Product code: SM-G975UZKASPR CSC country code: USA CSC sales code: SPR Phone SN: R58M256RERT IMEI: 352695101xxxxxx HW version: REV1.0 RF cal date: 2019.03.01 Chip name: SM8150 Modem board: SM8150 Security patch: 2019-04-01 Boot Warranty bit: 0 SIM State: ABSENT Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... OK Carrier ID: SPR BLOB(IMEI) SIGN: OK Checking security... OK Searching server... OK Waiting for server answer... OK Calculating... OK Rebooting phone... OK Unlock done

03-08-2020, 12:55	#1429 (permalink)
qasir_amz No Life Poster Join Date: Dec 2009 Location: PAKISTAN Posts: 2,107 Member: 1185918 Status: Offline Sonork: 100.1617322 Thanks Meter: 428	G955F Repair Network Done REPAIR INSTRUCTIONS: Phone must be rooted! If the software can't root the phone automatically, then you must root your device manually. 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Fill values what you need to repair. 6. Press 'Repair' button. 7. Press 'Patch Certificate' if you have network problem after repairing. Operation: Patch Certificate Selected model: SM-G955F Software version: 39.6 Waiting ADB device... OK Reading phone info... Model: SM-G955F Android version: 9 PDA version: G955FXXS5DSF1 CSC version: G955FOXM5DSF1 Phone version: G955FXXS5DSF1 Product code: SM-G955FZKAVOD CSC country code: Germany CSC sales code: DBT Phone SN: RF8JC0FNF7D IMEI: 3591220xxxxxxxxxx HW version: MP 0.501 RF cal date: 20171206 Chip name: EXYNOS8895 Modem board: SHANNON355 Security patch: 2019-06-01 Boot Warranty bit: 1 SIM State: ABSENT Checking Super user right... true Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... OK Searching server... OK Checking server answer... OK Executing... OK Searching server... OK Waiting for server answer... OK Patching... OK Rebooting phone... OK Done with Samsung Tool PRO v.39.6

03-09-2020, 14:29	#1430 (permalink)
..::GMSR::.. No Life Poster Join Date: Nov 2010 Location: RSA-2048 Age: 38 Posts: 1,716 Member: 1444462 Status: Offline Thanks Meter: 1,337	E2220 Unlock - ok Selected model: E2220 Selected com port: COM12 Selected speed port: 230400 Please, connect phone and press power button 3 seconds Phone Detected Use automatic parameters Phone in TAT MODE Phone OLD IMEI: 354 Phone SW: E2220XXLK1 Phone CSC: E2220XFVLK1 Phone BT ADDR: 9CE6-E7-A0347E Phone SN: RV1D30WDKP Unlock - ok Elapsed time: 17 second, sw ver: 3.5.0040 -------------------------------------------------------------------------------

03-12-2020, 11:25	#1431 (permalink)
Yahia_Sb No Life Poster Join Date: Aug 2014 Posts: 658 Member: 2233266 Status: Offline Thanks Meter: 252	samsung a107f read code done

03-13-2020, 19:30	#1432 (permalink)
multiomc Freak Poster Join Date: May 2013 Location: MOROCCO Age: 34 Posts: 210 Member: 1945420 Status: Offline Thanks Meter: 31	Waiting ADB device... OK Reading phone info... Model: SM-J710GN Android version: 7.0 PDA version: J710GNDXU3BQH6 CSC version: J710GNOLB3BQH6 Phone version: J710GNDXU3BQH2 Product code: SM-J710GZDUXTC CSC country code: PHILIPPINES CSC sales code: XTC Phone SN: RF8HB3F74RV IMEI: 358447076430082 HW version: MP 0.400 RF cal date: 20161126 Chip name: EXYNOS7870 Modem board: SHANNON315 Security patch: 2017-08-01 Boot Warranty bit: 1 SIM State: ABSENT,ABSENT Checking Super user right... true Reading NV data... OK Checking NV data... OK Reading data... OK Detecting MODEM... OK Reading MODEM... OK Calculating... OK Initialization data... OK Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Writing zTool... OK Initialization zTool... OK Running zTool, please wait... OK Reading data... OK HWID: F6 06 00 00 00 00 00 00 00 00 00 00 06 55 9C 4C Calculating... OK Unlocking... OK Writing NV data... OK Rebooting phone... OK Unlock done J710GN-CF-ROOT-6.0.1-www.taflish.com ROOT

03-18-2020, 07:25	#1433 (permalink)
qasir_amz No Life Poster Join Date: Dec 2009 Location: PAKISTAN Posts: 2,107 Member: 1185918 Status: Offline Sonork: 100.1617322 Thanks Meter: 428	G965F U7 9.0 Successful Repair imei and network fix REPAIR INSTRUCTIONS: 1. Power on the phone. 2. Enable 'USB debugging' in 'Settings'-'Developer options', tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Reboot to...' button and select mode to reboot (download or recovery). Operation: Patch Certificate Selected model: SM-G965F Software version: 39.7 Waiting ADB device... OK Reading phone info... Model: SM-G965F Android version: 9 PDA version: G965FXXU7CSJ1 CSC version: G965FOBE7CSJ3 Phone version: G965FXXU7CSI6 Product code: SM-G965FZKEVOD CSC country code: UK CSC sales code: EVR Phone SN: RF8K722KQQV IMEI: 35930804xxxxxx HW version: MP 0.900 RF cal date: 20180720 Chip name: EXYNOS9810 Modem board: SHANNON360 Security patch: 2019-10-01 Boot Warranty bit: 1 SIM State: ABSENT Checking Super user right... true Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... OK Searching server... OK Checking server answer... OK Executing... OK Searching server... OK Waiting for server answer... OK Patching... OK Rebooting phone... OK Done with Samsung Tool PRO v.39.7

03-18-2020, 08:04	#1434 (permalink)
qasir_amz No Life Poster Join Date: Dec 2009 Location: PAKISTAN Posts: 2,107 Member: 1185918 Status: Offline Sonork: 100.1617322 Thanks Meter: 428	G925T Network Unlock UNLOCK INSTRUCTIONS: New Securiry Type: Phone must be rooted! If the software can't root the phone automatically, then you must root your device manually. 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Unlock' button and select 'New Unlock' for direct unlock. 6. Press 'Read codes' button and select 'Read codes New' to read security codes. Old Securiry Type: 1. Power on the phone. 2. Connect the phone to PC with USB cable. 3. Check Samsung modem in device manager, install drivers if needed. 4. Press 'Unlock' button and select 'Unlock' for direct unlock. 5. Press 'Read codes' button and select 'Read codes' to read security codes. To read security codes via diagnostic port: 1. Power on the phone. 2. Type *#0808# and select 'DM+MODEM+ADB'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Press 'Read Codes DIAG' button to read security codes. To read security codes using sever: 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Read Codes via server' button, select 'Read codes ...' algo, write your login and password in window if it will appear. (Login and password will be saved as default after first input and can be changed in settings.) To reset Google account activation or Samsung reactivation lock: 1. Power on the phone in download mode (turn off phone, press vol.down + home + power). 2. Connect the phone to PC with USB cable, install drivers if needed. 3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock. 4. After phone reboot, go to settings and perform factory reset. To reset Google account activation lock with UART cable: 1. Phone must be powered off 2. Connect the phone to UART cable. 3. Select correct COM port in port settings. 4. Press 'Reset FRP UFS' and follow the instructions in program. Operation: Unlock Selected model: SM-G925T Selected port: COM299 SAMSUNG Mobile USB Serial Port Software version: 39.7 Waiting ADB device... OK Reading phone info... Model: SM-G925T Android version: 7.0 PDA version: G925TUVS6FRC1 CSC version: G925TTMB6FRC1 Phone version: G925TUVU6ARA1 Product code: SM-G925FZDAVOD CSC country code: USA CSC sales code: TMB Phone SN: IMEI: 35979706xxxxxxxx HW version: MP 0.70V RF cal date: 20151119 Chip name: EXYNOS7420 Modem board: SHANNON333 Security patch: 2018-03-01 Boot Warranty bit: 1 SIM State: NETWORK_LOCKED Checking Super user right... true Reading NV data... OK Checking NV data... OK Initialization zTool... OK Running zTool, please wait... OK HWID: 88 31 9F B4 B4 04 00 00 00 00 00 00 00 00 00 00 Calculating... OK Unlocking... OK Writing NV data... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.39.7

03-18-2020, 08:08	#1435 (permalink)
qasir_amz No Life Poster Join Date: Dec 2009 Location: PAKISTAN Posts: 2,107 Member: 1185918 Status: Offline Sonork: 100.1617322 Thanks Meter: 428	TAB 4 T235 Network Unlock Done UNLOCK INSTRUCTIONS: Phone must be rooted! If the software can't root the phone automatically, then you must root your device manually. 1. Power on the phone. 2. Enable 'USB debugging' in 'Settings'-'Developer options' for Android 4.0 - 4.1.2 or tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options' in Android 4.2+. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Unlock' button for direct unlock. Operation: Unlock Selected model: SM-T235 Software version: 39.7 Waiting ADB device... OK Reading phone info... Model: SM-T235 Android version: 4.4.2 PDA version: T235XXU1AOB2 CSC version: T235OXX1AOB1 Phone version: T235XXU1AOB1 Product code: SM-T235NZWAEVR CSC country code: UK CSC sales code: EVR Phone SN: RF2FB0D8RGK IMEI: 35350xxxxxxxxxx HW version: MP 0.300 RF cal date: 20141117 Chip name: EXYNOS3470 Modem board: SS222 Boot Warranty bit: 0 SIM State: READY Checking Super user right... true Reading NV data... OK Checking NV data... OK Detected new type of security Calculating... OK Unlocking... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.39.7

03-18-2020, 08:20	#1436 (permalink)
qasir_amz No Life Poster Join Date: Dec 2009 Location: PAKISTAN Posts: 2,107 Member: 1185918 Status: Offline Sonork: 100.1617322 Thanks Meter: 428	G532F network Repair REPAIR INSTRUCTIONS: 1. Power on the phone. 2. Enable 'USB debugging' in 'Settings'-'Developer options', tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Reboot to...' button and select mode to reboot (download or recovery). Operation: Patch Certificate Selected model: SM-G532F Software version: 39.7 Waiting ADB device... OK Reading phone info... Model: SM-G532F Android version: 6.0.1 PDA version: G532FXXU1ARL1 CSC version: G532FOXE1ASA1 Phone version: G532FXXU1ARL1 Product code: SM-G532FZSDSER CSC country code: Russia CSC sales code: SER Phone SN: RZ8K91NMX0Y IMEI: 35534xxxxxxxxx HW version: MP 0.300 RF cal date: 20180916 Chip name: MT6737T Modem board: MT6737T Security patch: 2018-08-01 Boot Warranty bit: 1 SIM State: READY,ABSENT Checking Super user right... true Searching server... OK Checking server answer... OK Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... OK Preparation of data... OK Writing data to phone... OK Rebooting phone... OK Done with Samsung Tool PRO v.39.7

03-21-2020, 02:56	#1437 (permalink)
anrmobile No Life Poster Join Date: Oct 2011 Location: online Posts: 871 Member: 1680232 Status: Offline Sonork: 100.1611221 Thanks Meter: 227	Operation: Flash Selected model: SM-J327P Software version: 39.7 File analysis... OK Total file size: 0xD9BBDF40 (3483 Mb) Searching USB Flash interface... COM29 detected Setup connection... OK Set PIT file... OK Reading PIT from phone... OK Sending aboot.mbn... OK Sending sbl1.mbn... OK Sending rpm.mbn... OK Sending tz.mbn... OK Sending devcfg.mbn... OK Sending NON-HLOS.bin... OK Sending cmnlib.mbn... OK Sending keymaster.mbn... OK Sending lksecapp.mbn... OK Sending sec.dat... OK Sending apdp.mbn... OK Sending msadp.mbn... OK Sending boot.img... OK Sending recovery.img... OK Sending system.img.ext4... OK Sending persist.img.ext4... OK Sending modem.bin... OK Sending adspso.bin... OK Sending cache.img.ext4... OK Flashing done (time - 00:06:12) Done with Samsung Tool PRO v.39.7

03-21-2020, 06:25	#1438 (permalink)
anrmobile No Life Poster Join Date: Oct 2011 Location: online Posts: 871 Member: 1680232 Status: Offline Sonork: 100.1611221 Thanks Meter: 227	Operation: Unlock Selected model: SM-N915P Selected port: COM49 SAMSUNG Mobile USB Serial Port Software version: 39.7 Reading phone info... Reading IMEI... OK IMEI: 990004779575426 Unlocking... OK Reseting... OK Unlock done Done with Samsung Tool PRO v.39.7

03-21-2020, 08:22	#1439 (permalink)
GSM AR Registered User Join Date: Aug 2016 Location: Multan Pakistan Posts: 787 Member: 2608490 Status: Offline Thanks Meter: 921	Samsung Galaxy On5 SM-G550T1 Unlock done Operation: Unlock Selected model: SM-G550T1 Software version: 39.1 Waiting ADB device... OK Reading phone info... Model: SM-G550T1 Android version: 6.0.1 PDA version: G550T1UVS2APL1 CSC version: G550T1TMK2APL1 Phone version: G550TUVS2APL1 Product code: SM2G550TZKATMK CSC country code: USA CSC sales code: TMK Phone SN: RV8HBXXXXXX IMEI: 35415XXXXXXXXXX HW version: REV0.4 RF cal date: 20170619 Chip name: EXYNOS3475 Modem board: SHANNON308 Security patch: 2016-11-01 Boot Warranty bit: 1 SIM State: NETWORK_LOCKED Checking Super user right... true Reading NV data... OK Checking NV data... OK Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... OK Modem board: SHANNON308 HWID: 17 FD 98 77 EB BD 3E 54 F3 4A BD 99 2C 4F 76 3F Calculating... OK Unlocking... OK Writing NV data... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.39.1

03-21-2020, 18:24	#1440 (permalink)
anrmobile No Life Poster Join Date: Oct 2011 Location: online Posts: 871 Member: 1680232 Status: Offline Sonork: 100.1611221 Thanks Meter: 227	Operation: Flash Selected model: SM-N915P Software version: 39.7 File analysis... OK Total file size: 0xE8594088 (3717 Mb) Searching USB Flash interface... COM29 detected Setup connection... OK Set PIT file... OK Reading PIT from phone... OK Sending aboot.mbn... OK Sending sbl1.mbn... OK Sending rpm.mbn... OK Sending tz.mbn... OK Sending sdi.mbn... OK Sending NON-HLOS.bin... OK Sending boot.img... OK Sending recovery.img... OK Sending system.img.ext4... OK Sending persist.img.ext4... OK Sending modem.bin... OK Sending cache.img.ext4... OK Flashing done (time - 00:06:36) Done with Samsung Tool PRO v.39.7