Post here successfully job with Z3X-BOX Samsung (2018-2022) - Page 3 - GSM-Forum

sadamsoft · 11-06-2017, 15:37

Quote:

Originally Posted by ghacks

root the phone selected model sprint unlock the phone
https://mega.nz/#!kM1ySRYT!TFO7QKtvC...QdEBp9aWmrhCE4

https://mega.nz/#!sYEnUCwB!dpd96ENI6...lY1FqbtMvBud08

Waiting ADB device... OK
Reading phone info...
Model: SM-N950U
Android version: 7.1.1
Product code: SM-N950UZVASPR
Phone version: N950USQU1AQH8
PDA version: FA71_N950USQU1AQH8
CSC version:
CSC country code:
CSC sales code:
HW version: REV1.0
Phone SN: R28J90R2K4T
Modem board: MSM8998
Security patch: 2017-07-01
RF cal date: 2017.09.07
IMEI:
Writing AT RIL... OK
Initialization AT RIL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.29.2
Report Post

thank u bro good post

pashamangl · 11-06-2017, 15:51

ghacks bro pls provide N950f eng root file if you have.thanks in advance

ghacks · 11-06-2017, 22:05

Quote:

Originally Posted by pashamangl

ghacks bro pls provide N950f eng root file if you have.thanks in advance

this file its a gold sorry i cannot find it..

iffipower · 11-09-2017, 17:42

after flash on eng root phone stuck on serial number any solution

(((NAEEM))) · 11-13-2017, 15:55

G950W S8 UNLOCK Done

Checking Login and Password... OK
Ballance: 21 crd.
Waiting ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SM-G950W
Android version: 7.0
Product code: SM-G950WZVARWC
Phone version: G950WVLU1AQD9
PDA version: G950WVLU1AQD9
CSC version: G950WOYA1AQD9
CSC country code: Canada
CSC sales code: RWC
HW version: REV1.0
Phone SN: R28J4462MLR
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2017-04-01
RF cal date: 2017.05.02
IMEI: 355757081962488
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM112 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 19604684
NET lock: 19618695
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.29.6

Rizwan ch08 · 11-16-2017, 12:09

Operation: Unlock
Selected model: SM-G570F
Software version: 28.2

Waiting ADB device...
Please, allow USB debugging on phone... Ok
Reading phone info...
Model: SM-G570F
Android version: 6.0.1
Product code: SM-G570FZKDINS
Phone version: G570FXXU1API6
PDA version: G570FXXU1API6
CSC version: G570FODD1API7
CSC country code: India
CSC sales code: INS
HW version: MP 0.500
Phone SN: R28J13Z4NDL
Chip name: EXYNOS7570
Modem board: SHANNON305
Security patch: 2016-09-01
RF cal date: 20170201
IMEI:
Checking Super user right... true
Reading NV data... Ok
Checking NV data... Ok
Reading data... error
Security damaged (4 23)
Initialization zTool... Ok
Running zTool, please wait...
Start... Ok
Initialization... Ok
Generate and check client proof... Ok
Verify proof by client... Ok
Reading data from phone... Ok
Modem board: SHANNON305
HWID: 91 D1 89 7E 42 40 1B 51 35 94 2C C7 0A 00 00 00
Calculating... Ok
Unlocking... Ok
Writing NV data... Ok
Rebooting phone... Ok
Unlock done

Done with Samsung Tool PRO v.28.2

rajabali6023 · 11-16-2017, 12:13

Good Work CH Rizwan

-Mosin- · 12-04-2017, 19:18

Galaxy J7 Nio frp Done By ADB Mode.

Operation: Reset FRP
Selected model: SM-J710FN
Software version: 30.0

You must activate ADB before reset FRP Yes
Goto 'Terms and conditions' press 'NEXT' and 'AGREE' EULA Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-J701F
Android version: 7.0
Product code: SM-J701FZDDXFA
Phone version: J701FXXU1AQF8
PDA version: J701FXVU1AQF8
CSC version: J701FOJV1AQG1
CSC country code: SOUTH AFRICA
CSC sales code: XFA
HW version: MP 0.400
Phone SN: RF8JA1G36SN
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2017-07-01
RF cal date: 20171012
IMEI: 3528xxxxxxxxxxx
Incorrect model selected. This may damage your phone. Continue? Yes
Bypass FRP... OK
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.30.0

conroybar2 · 01-17-2018, 15:24

Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will apear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server
Selected model: SM-N950U
Software version: 30.5

Waiting ADB device... OK
Reading phone info...
Model: SM-N950U
Android version: 7.1.1
Product code: SM-N950UZKAATT
Phone version: N950USQU1AQH7
PDA version: N950USQU1AQH7
CSC version: N950UOYN1AQH7
CSC country code: USA
CSC sales code: ATT
HW version: REV1.0
Phone SN:
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2017-08-01
RF cal date: 2017.09.26
IMEI: 35xxxxxxxxxxxxx
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM9 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 58506405
NET lock: 13693642
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.30.5

profkefah · 02-15-2018, 08:34

hi
phone was slow
when i did factory reset i noticed dm failed in recovery

i downgrade from 7 to 6.0.1
phone stuck at recovery
dm failed
i tried octopus and chimera but both required phone on normal mode
but z3x did it in download mode
so i did drk repair by z3x
first flash pit file + 4 file stock firmware
then do drk by z3x

Quote:

REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
7. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.

Operation: Repair DRK
Selected model: SM-G925F
Software version: 30.7

Checking local file... OK
Searching server... OK
Compare local and server file... OK (up to date)
Searching USB Flash interface... COM7 detected
Setup connection... OK
Reading data from phone... OK
Sending data to phone... OK
Sending data to phone... OK
Waiting ADB device... OK
Reading phone info...
Recovery build version: 6.0.1
Boot version: G925FXXU5DQAG
Platform: exynos7420
Boot serial: 03157df3f809b924
Product board: zerolte
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Checking DRK status... NG!
Writing DRK... OK
Checking DRK status...
Repairing DMVT key... OK
Rebooting phone... OK
Repair DRK done

Done with Samsung Tool PRO v.30.7

hmtc14 · 03-22-2018, 14:37

Operation: Unlock
Selected model: SM-J710F
Software version: 31.0

Waiting ADB device... OK
Reading phone info...
Model: SM-J710F
Android version: 6.0.1
Product code: SM-J710FZDDMID
Phone version: J710FXXS3AQH1
PDA version: J710FXXS3AQG1
CSC version: J710FOJV2AQB2
CSC country code: Iraq
CSC sales code: MID
HW version: MP 0.400
Phone SN: RF8J92P4MYN
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2017-07-01
RF cal date: 20170923
IMEI: 358662089337914
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Initialization data... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Writing zTool... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data... OK
HWID: 27 05 00 00 00 00 00 00 00 00 00 00 B7 94 A7 9C
Calculating... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.31.0

muzammilrashdi · 04-04-2018, 12:35

GALAXY A520F 7.0 FRP DONE VERY EASY WITHOUT ADB ENABLE

JUST SELECT G925F AND RESET FRF......

LOG:

Operation: Reset FRP/React/EE
Selected model: SM-G925F
Software version: 31.0

Searching Samsung USB Flash interface... COM34 detected
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP lock... OK
Reset done
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.31.0

BIG THANX Z3X TEAM U SAVE MY TIME.....

BR MUZAMMILRASHDI

mahabubul1980 · 04-04-2018, 12:52

without adb activate possible?

muzammilrashdi · 04-04-2018, 14:59

Quote:

Originally Posted by mahabubul1980

without adb activate possible?

yes bro check log....
finally after 2 days i found this solution...

mebugti · 04-09-2018, 11:55

samsung sm-j510f wifi not working 1000 % done
j5 2016 model wifi not open i done ....

11-13-2017, 15:55	#35 (permalink)
(((NAEEM))) Freak Poster Join Date: Jun 2010 Location: ON Maind Posts: 499 Member: 1326581 Status: Offline Sonork: (((NAEEM))) Thanks Meter: 52	G950W S8 UNLOCK Done With Z3X G950W S8 UNLOCK Done Checking Login and Password... OK Ballance: 21 crd. Waiting ADB device... Please, allow USB debugging on phone... OK Reading phone info... Model: SM-G950W Android version: 7.0 Product code: SM-G950WZVARWC Phone version: G950WVLU1AQD9 PDA version: G950WVLU1AQD9 CSC version: G950WOYA1AQD9 CSC country code: Canada CSC sales code: RWC HW version: REV1.0 Phone SN: R28J4462MLR Chip name: MSM8998 Modem board: MSM8998 Security patch: 2017-04-01 RF cal date: 2017.05.02 IMEI: 355757081962488 Rebooting phone... OK Waiting ADB device... OK Rebooting phone... OK Waiting ADB device... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Searching Ramdump interface... COM112 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Freeze code: 19604684 NET lock: 19618695 SUB lock: 00000000 SP lock: 00000000 CP lock: 00000000 For check lock status: *#7465625# Done with Samsung Tool PRO v.29.6

11-16-2017, 12:09	#36 (permalink)
Rizwan ch08 No Life Poster Join Date: Nov 2007 Location: Hum Aapke Dil Mein Age: 39 Posts: 2,239 Member: 637860 Status: Offline Sonork: 100.1605309 Thanks Meter: 996	samsung galaxy j5 prime g570f unlock done Operation: Unlock Selected model: SM-G570F Software version: 28.2 Waiting ADB device... Please, allow USB debugging on phone... Ok Reading phone info... Model: SM-G570F Android version: 6.0.1 Product code: SM-G570FZKDINS Phone version: G570FXXU1API6 PDA version: G570FXXU1API6 CSC version: G570FODD1API7 CSC country code: India CSC sales code: INS HW version: MP 0.500 Phone SN: R28J13Z4NDL Chip name: EXYNOS7570 Modem board: SHANNON305 Security patch: 2016-09-01 RF cal date: 20170201 IMEI: Checking Super user right... true Reading NV data... Ok Checking NV data... Ok Reading data... error Security damaged (4 23) Initialization zTool... Ok Running zTool, please wait... Start... Ok Initialization... Ok Generate and check client proof... Ok Verify proof by client... Ok Reading data from phone... Ok Modem board: SHANNON305 HWID: 91 D1 89 7E 42 40 1B 51 35 94 2C C7 0A 00 00 00 Calculating... Ok Unlocking... Ok Writing NV data... Ok Rebooting phone... Ok Unlock done Done with Samsung Tool PRO v.28.2

12-04-2017, 19:18	#38 (permalink)
-Mosin- No Life Poster Join Date: May 2013 Location: Far From Home..:( Posts: 2,006 Member: 1948608 Status: Offline Thanks Meter: 1,746	J7 Neo SM-J701F frp Done. Galaxy J7 Nio frp Done By ADB Mode. Operation: Reset FRP Selected model: SM-J710FN Software version: 30.0 You must activate ADB before reset FRP Yes Goto 'Terms and conditions' press 'NEXT' and 'AGREE' EULA Yes Waiting ADB device... OK Reading phone info... Model: SM-J701F Android version: 7.0 Product code: SM-J701FZDDXFA Phone version: J701FXXU1AQF8 PDA version: J701FXVU1AQF8 CSC version: J701FOJV1AQG1 CSC country code: SOUTH AFRICA CSC sales code: XFA HW version: MP 0.400 Phone SN: RF8JA1G36SN Chip name: EXYNOS7870 Modem board: SHANNON315 Security patch: 2017-07-01 RF cal date: 20171012 IMEI: 3528xxxxxxxxxxx Incorrect model selected. This may damage your phone. Continue? Yes Bypass FRP... OK For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset' Done with Samsung Tool PRO v.30.0

01-17-2018, 15:24	#39 (permalink)
conroybar2 Insane Poster Join Date: Mar 2015 Posts: 98 Member: 2361634 Status: Offline Thanks Meter: 36	ATT SM-N950U Read Codes via Server Done Reading codes using sever: 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Read Codes via server' button, write your login and password in window if it will apear. (Login and password will be saved as default after first input and can be changed in settings.) Operation: Read Codes via Server Selected model: SM-N950U Software version: 30.5 Waiting ADB device... OK Reading phone info... Model: SM-N950U Android version: 7.1.1 Product code: SM-N950UZKAATT Phone version: N950USQU1AQH7 PDA version: N950USQU1AQH7 CSC version: N950UOYN1AQH7 CSC country code: USA CSC sales code: ATT HW version: REV1.0 Phone SN: Chip name: MSM8998 Modem board: MSM8998 Security patch: 2017-08-01 RF cal date: 2017.09.26 IMEI: 35xxxxxxxxxxxxx Rebooting phone... OK Waiting ADB device... OK Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Searching Ramdump interface... COM9 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Freeze code: 58506405 NET lock: 13693642 SUB lock: 00000000 SP lock: 00000000 CP lock: 00000000 For check lock status: *#7465625# Done with Samsung Tool PRO v.30.5

03-22-2018, 14:37	#41 (permalink)
hmtc14 Insane Poster Join Date: Aug 2017 Location: Dhaka Age: 34 Posts: 59 Member: 2749348 Status: Offline Thanks Meter: 8	Z3x 31.0 Operation: Unlock Selected model: SM-J710F Software version: 31.0 Waiting ADB device... OK Reading phone info... Model: SM-J710F Android version: 6.0.1 Product code: SM-J710FZDDMID Phone version: J710FXXS3AQH1 PDA version: J710FXXS3AQG1 CSC version: J710FOJV2AQB2 CSC country code: Iraq CSC sales code: MID HW version: MP 0.400 Phone SN: RF8J92P4MYN Chip name: EXYNOS7870 Modem board: SHANNON315 Security patch: 2017-07-01 RF cal date: 20170923 IMEI: 358662089337914 Checking Super user right... true Reading NV data... OK Checking NV data... OK Reading data... OK Detecting MODEM... OK Reading MODEM... OK Calculating... OK Initialization data... OK Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Writing zTool... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data... OK HWID: 27 05 00 00 00 00 00 00 00 00 00 00 B7 94 A7 9C Calculating... OK Unlocking... OK Writing NV data... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.31.0

11-06-2017, 15:51	#32 (permalink)
pashamangl Freak Poster Join Date: Aug 2007 Location: Between Heaven and Hell Posts: 185 Member: 563008 Status: Offline Thanks Meter: 108	ghacks bro pls provide N950f eng root file if you have.thanks in advance

11-09-2017, 17:42	#34 (permalink)
iffipower No Life Poster Join Date: Sep 2011 Location: NOKIA Posts: 1,189 Member: 1663119 Status: Offline Sonork: iffi3 Thanks Meter: 213	after flash on eng root phone stuck on serial number any solution

11-16-2017, 12:13	#37 (permalink)
rajabali6023 Freak Poster Join Date: Oct 2015 Location: Secret Posts: 274 Member: 2478653 Status: Offline Sonork: 100.1678019 Thanks Meter: 152	Good Work CH Rizwan

04-04-2018, 12:35	#42 (permalink)
muzammilrashdi No Life Poster Join Date: Jan 2014 Location: GSM-WORLD Posts: 690 Member: 2116947 Status: Offline Sonork: 100.1652193 Thanks Meter: 1,302	Galaxy a520f 7.0 frp done GALAXY A520F 7.0 FRP DONE VERY EASY WITHOUT ADB ENABLE JUST SELECT G925F AND RESET FRF...... LOG: Operation: Reset FRP/React/EE Selected model: SM-G925F Software version: 31.0 Searching Samsung USB Flash interface... COM34 detected Setup connection... OK Reading PIT from phone... OK Searching FRP lock... OK Erasing FRP lock... OK Reset done For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset' Done with Samsung Tool PRO v.31.0 BIG THANX Z3X TEAM U SAVE MY TIME..... BR MUZAMMILRASHDI

04-04-2018, 12:52	#43 (permalink)
mahabubul1980 Junior Member Join Date: Jul 2010 Posts: 28 Member: 1351039 Status: Offline Sonork: 2769 Thanks Meter: 3	without adb activate possible?

04-09-2018, 11:55	#45 (permalink)
mebugti Freak Poster Join Date: Mar 2016 Location: Balochistan Posts: 139 Member: 2545664 Status: Offline Sonork: nill Thanks Meter: 88	samsung sm-j510f wifi not working 1000 % done samsung sm-j510f wifi not working 1000 % done j5 2016 model wifi not open i done ....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode