Post here successfully job with Z3X-BOX Samsung (2018-2022)

[chipscell25]

1.-Flash combination COMBINATION_UUB_FA60_G610MUBU4ASB1_UUBFAC_CL917027 1_QB22209006_REV00_user_mid_no
hip.tar (is in support of z3x)

2.-Flash the AP of the firmware AP_G610MUBU4CSC1_CL14381225_QB22620079_REV00_user_ low_ship_meta.tar marking only boot.img, recovery.img and system.img

3.-wait for it to turn on and activate OEM

4.-
then flashing full firmware of the same binary


Flash combination

Operation: Flash
Selected model: SM-G610M
Software version: 36.2

File analysis ... OK
Total file size: 0xAFA2F9A0 (2810 Mb)
Looking for USB Flash interface ... COM16 detected
Configure connection ... OK
Reading the PIT from the phone ... OK
Sending boot.img.lz4 ... OK
Sending recovery.img.
lz4 ... ok
Sending system.img.lz4 ... OK
Flashing fact (time - 00:02:52)

FULL firmware

Operation: Flash
Selected model: SM-G610M
Software version: 36.2

File analysis ... OK
Total file size: 0xFB333818 (4019 Mb)
Looking for USB Flash interface ... COM16 detected
Configure connection ... OK
Set PIT file ... OK
Reading the PIT from the phone ... OK
Sending sboot.
bin.lz4 ... ok
Sending param.bin.lz4 ... OK
Sending cm.bin.lz4 ... OK
Sending boot.img.lz4 ... OK
Sending recovery.img.lz4 ... OK
Sending system.img.lz4 ... OK
Sending userdata.img.lz4 ... OK
Sending modem.bin.lz4 ... OK
Sending cache.img.lz4 ... OK
Sending hidden.img.lz4 ... OK
Flashing fact (time - 00:04:02)

[chipscell25]

Operation: Reset FRP
Selected model: SM-J700T1
Software version: 36.2

You must activate ADB before reset FRP Yes
Goto 'Terms and conditions' press 'NEXT' and 'AGREE' EULA Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-J700T1
Android version: 6.0.1
PDA version: J700T1UVS3AQF1
CSC version: J700T1TMK3AQF1
Phone version: J700T1UVS3AQF1
Product code: SM2J700TZWATMK
CSC country code: USA
CSC sales code: TMK
Phone SN: R58HB3AA3BA
IMEI: 35561108xxxxxxx
HW version: REV0.5
RF cal date: 20171206
Chip name: EXYNOS7580
Modem board: SHANNON310
Security patch: 2017-06-01
Boot Warranty bit: 0
SIM State: ABSENT
Bypass FRP... OK
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
Done with Samsung Tool PRO v.36.2

[chipscell25]

Operation: Reset FRP
Selected model: SM-J700T1
Software version: 36.2

You must activate ADB before reset FRP Yes
Goto 'Terms and conditions' press 'NEXT' and 'AGREE' EULA Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-J700T1
Android version: 6.0.1
PDA version: J700T1UVS3AQF1
CSC version: J700T1TMK3AQF1
Phone version: J700T1UVS3AQF1
Product code: SM2J700TZWATMK
CSC country code: USA
CSC sales code: TMK
Phone SN: R58H54PQSFV
IMEI: 3572170xxxxxxxx
HW version: REV0.5
RF cal date: 20160526
Chip name: EXYNOS7580
Modem board: SHANNON310
Security patch: 2017-06-01
Boot Warranty bit: 0
SIM State: ABSENT
Bypass FRP... OK
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
Done with Samsung Tool PRO v.36.2

[rai14]

Operation: Read Codes via Server
Selected model: SM-A600FN
Software version: 36.2

Checking Login and Password... OK
Ballance: 40 crd.
You have 40 credit(s) left. This operation takes 10 credits.Continue?  Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-A600FN
Android version: 9
PDA version: A600FNXXU3BSD2
CSC version: A600FNOXM3BSD2
Phone version: A600FNXXU3BSD2
Product code: SM-A600FZKNXEF
CSC country code: France
CSC sales code: XEF
Phone SN: R58K72YQ9FJ
IMEI: 357575095179982
HW version: REV0.0
RF cal date: 20180717
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2019-04-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 95906152
NET lock: 48293908
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#
Done with Samsung Tool PRO v.36.2

[chipscell25]

Operation: Read Codes via Server
Selected model: SM-J415FN
Software version: 36.2

Checking Login and Password... OK
Ballance: 9 crd.
You have 9 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-J415FN
Android version: 9
PDA version: J415FNXXU2BSDL
CSC version: J415FNOXM2BSDL
Phone version: J415FNXXU2BSDL
Product code: SM-J415FZDGPHE
CSC country code: SPAIN
CSC sales code: PHE
Phone SN: R58KA424E9T
IMEI: 3528161xxxxxxxx
HW version: REV0.4A
RF cal date: 2018.10.17
Chip name: MSM8917
Modem board: MSM8917
Security patch: 2019-04-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED,ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Ramdump interface... COM16 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 08384808
NET lock: 52802628
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#
Done with Samsung Tool PRO v.36.2

[aberon]

S10e unlock done

Operation: Read Codes via Server
Selected model: SM-G970F
Software version: 36.1

Checking Login and Password... OK
Ballance: 30 crd.
You have 30 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G970F
Android version: 9
PDA version: G970FXXU1ASAT
CSC version: G970FOXM1ASAT
Phone version: G970FXXU1ASAT
Product code: SM-G970FZGDSEE
CSC country code: SEAD
CSC sales code: SEE
Phone SN: RF8M20TED5B
IMEI: 3548891029XXXXX
HW version: MP 0.700
RF cal date: 20190214
Chip name: EXYNOS9820
Modem board: SHANNON5000
Security patch: 2019-01-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 63852741
NET lock: 06385372
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#

[profkefah]

BACKUP INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read EFS' button to read backup or 'Write EFS' to restore.

Read certificate operation:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't use this function.
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Press 'Read CERT' button to read certificates.

Operation: Info
Selected model: SM-G950F
Software version: 36.1

Searching Samsung modem... detected COM326
Reading phone info...
Model: SM-G950FD
AP version: G950FXXS4CRLB
CSC version: G950FOXM4CRL5
CP version: G950FXXU4CRKB
Product code: XSG
Phone SN: RF8JA2DRB9L
IMEI: 359623085710412
IMEI2: 359624085710410
Unique number: 9889DB37314437484B
Reading IMEI... OK
IMEI: 359623085710412 (SIGN: UNKNOWN)
IMEI 2: 359624085710410 (SIGN: UNKNOWN)

Done with Samsung Tool PRO v.36.1



BACKUP INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read EFS' button to read backup or 'Write EFS' to restore.

Read certificate operation:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't use this function.
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Press 'Read CERT' button to read certificates.

Operation: Read EFS
Selected model: SM-G950F
Software version: 36.1

Waiting ADB device... OK
Reading phone info...
Model: SM-G950F
Android version: 8.0.0
PDA version: G950FXXS4CRLB
CSC version: G950FOXM4CRL5
Phone version: G950FXXU4CRKB
Product code: SM-G950FZBDXSG
CSC country code: UAE
CSC sales code: XSG
Phone SN: RF8JA2DRB9L
IMEI: 359623085710412
HW version: MP 0.700
RF cal date: 20171020
Chip name: EXYNOS8895
Modem board: SHANNON355
Security patch: 2019-01-01
Boot Warranty bit: 0
Checking Super user right... true
Reading EFS from phone... OK
Saved to D:\BST\SamsungToolPRO\backup\EFS\EFS_SM-G950F_G950FXXS4CRLB_359623085710412_RF8JA2DRB9L_24-5-2019_22-54-47.tar

Done with Samsung Tool PRO v.36.1

[chiku1245]

hecking Login and Password... OK
Ballance: 15 crd.
You have 15 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-J600F
Android version: 8.0.0
PDA version: J600FXXU3ASA1
CSC version: J600FOJM3ASA1
Phone version: J600FXXU3ASA1
Product code: SM-J600FZDGKSA
CSC country code: KSA
CSC sales code: KSA
Phone SN: RF8K72ER2WN
IMEI: 359117093778974
HW version: REV0.3A
RF cal date: 20180724
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2019-01-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 73869417
NET lock: 25137207
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.36.1

[kondeci91]

Operation: Read Codes via Server
Selected model: SM-A305F
Software version: 36.2

Checking Login and Password... OK
Ballance: 5 crd.
You have 5 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-A305F
Android version: 9
PDA version: A305FDDU1ASD5
CSC version: A305FODM1ASD5
Phone version: A305FXXU1ASD5
Product code: SM-A305FZBFINS
CSC country code: India
CSC sales code: INS
Phone SN: RZ8M32DLLYN
IMEI: 354873106416128
HW version: MP 0.200
RF cal date: 20190326
Chip name: EXYNOS7904
Modem board: SHANNON327
Security patch: 2019-04-01
Boot Warranty bit: 0
SIM State: REGIONAL_LOCKED,REGIONAL_LOCKED
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 74868681
NET lock: 52841935
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#

[nadim electro]

Operation: Flash
Selected model: SM-A605FN
Software version: 36.2

File analysis... OK
Total file size: 0x13A3AE355 (5027 Mb)
Searching USB Flash interface... COM372 detected
Setup connection... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending aboot.mbn.lz4... OK
Sending sbl1.mbn.lz4... OK
Sending rpm.mbn.lz4... OK
Sending tz.mbn.lz4... OK
Sending devcfg.mbn.lz4... OK
Sending cmnlib.mbn.lz4... OK
Sending keymaster.mbn.lz4... OK
Sending apdp.mbn.lz4... OK
Sending msadp.mbn.lz4... OK
Sending NON-HLOS.bin.lz4... OK
Sending lksecapp.mbn.lz4... OK
Sending sec.dat.lz4... OK
Sending boot.img.lz4... OK
Sending recovery.img.lz4... OK
Sending vendor.img.ext4.lz4... OK
Sending system.img.ext4.lz4... OK
Sending persist.img.ext4.lz4... OK
Sending userdata.img.ext4.lz4... OK
Sending modem.bin.lz4... OK
Sending adspso.bin.lz4... OK
Sending cache.img.ext4.lz4... OK
Sending odm.img.ext4.lz4... OK
Sending omr.img.ext4.lz4... OK
Sending hidden.img.ext4.lz4... OK
Flashing done (time - 00:04:50)


A605fn frp remove via combination z3x thanks team

[gsmcoder78]

Originally Posted by slam4neon

1. flash COMBINATION_FAC_FA81_J610FXXU1ARI3
2 . go to settings , security , screen lock , create your own new pattern
3. flash J610FXXU1ARJ3 o any latest files BL , AP . CP . CSC .
4. START up device put same pattern what you have created before
that's it . thanx

On this FW will not work

J610FXXU1ASA3_J610FOJM1ASA2_XSG

Not Work with this firmware, which one you use ?

[nadim electro]

e1207t imei repair done via z3x thanks team



Selected com port: COM6
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Sending loader1... OK
Flash ID: 0000
Timeout
Send loaders - fail
Patch MSL - FAIL
Elapsed time: 14 second, sw ver: 3.5.0040
-------------------------------------------------------------------------------
Selected model: E1202
Selected com port: COM6
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Sending loader1... OK
Flash ID: F88B
Sending loader2... OK
Please wait for patching firmware...
Patch block
Please, connect phone and press power button 3 seconds
Phone Detected
Use automatic parameters
Phone in TAT MODE
Phone master IMEI: 00000000000000
Phone slave IMEI: 00000000000000
Phone SW: E1207TJVMG1
Phone CSC: E1207TOJVMG1
Phone BT ADDR: 0000-00-000000
Phone SN: RV1CA70YMA
Deactivated MSL - TRUE
Write master imei - ok
Write slave imei - ok
Repair - ok
Elapsed time: 58 second, sw ver: 3.5.0040

[WAGES]

pls double deduction
REFUND MY CREDIT

Checking Login and Password... OK
Ballance: 20 crd.
You have 20 credit(s) left. This operation takes 8 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G935T
Android version: 7.0
PDA version: G935TUVU4BQG5
CSC version: G935TTMB4BQG5
Phone version: G935TUVU4BQG5
Product code: SM-G935TZSATMB
CSC country code: USA
CSC sales code: TMB
Phone SN: RF8H61SGK0D
IMEI: 357751073909472
HW version: REV0.7
RF cal date: 2016.06.17
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2017-07-01
Boot Warranty bit: 0
SIM State: ABSENT
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Rebooting to upload... OK
Searching Ramdump interface... COM235 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... timeout
Phone not found

[celltellpb]

Waiting ADB device... OK
Reading phone info...
Model: SM-N960F
Android version: 8.1.0
PDA version: N960FXXS2ARJ4
CSC version: N960FOXM2ARJ1
Phone version: N960FXXU2ARJ1
Product code: SM-N960FZKDPHE
CSC country code: SPAIN
CSC sales code: PHE
Phone SN: RF8K70HRY2W
IMEI: 359443090301952
HW version: MP 0.700
RF cal date: 20180705
Chip name: EXYNOS9810
Modem board: SHANNON360
Security patch: 2018-10-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 79030618
NET lock: 64826849
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.36.2

[gsmcoder78]

You didnt describe nothing