s 3350 unlock done with z3x
 

Selected model: S3350
Selected com port: COM3
Selected speed port: 921600
Phone must be OFF
Press * and connect phone by USB cable
Connecting to Device... OK
Sending preloader ... OK
Sending loader ... OK
Damping ... OK
Damping ... OK
Damping ... OK
Damping ... OK
Damping ... OK
Damping ... OK
Patch block
Patch block
Already patched SW
Erasing ... OK
Writing ... OK
After power on phone - connect to UART cable
Phone SN: RF6B922048
Deactivate MSL - OK
Unlock - ok
Elapsed time: 115 second, sw ver: 3.5.0029
:p:p:p

Selected model: S3350
Selected com port: COM3
Selected speed port: 921600
Phone must be OFF
Press * and connect phone by USB cable
Connecting to Device... OK
Sending preloader ... OK
Sending loader ... OK
Damping ... OK
Damping ... OK
Damping ... OK
Damping ... OK
Damping ... OK
Damping ... OK
Already patched SW
Erasing ... OK
Writing ... OK
After power on phone - connect to UART cable
Timeout
Deactivate MSL - fail
Read info - fail

please helpppppppppppppppppppppp!!!

what is UART cable? same problem can we unlock by code?

3303k made by gpg thanksssssssssss

can i unlock with it only usb cable by read codes

Selected model: S3350
Selected com port: COM5
Selected speed port: 921600
Phone must be OFF
Press * and connect phone by USB cable
Connecting to Device... OK
Sending preloader ... OK
Sending loader ... OK
Damping ... OK
Damping ... OK
Damping ... OK
Damping ... OK
Damping ... OK
Damping ... OK
Already patched SW
Erasing ... OK
Writing ... OK
After power on phone - connect to UART cable
Phone SN: .........
Deactivate MSL - OK
Unlock - ok
Elapsed time: 54 second, sw ver: 3.5.0028
-------------------------------------------------------------------------------

Thenks For Good Info Brother .................................

100% OK Brother.........................

try again same system or try with HWK

Selected model: S3350
Selected com port: COM40
Selected speed port: 921600
Phone must be OFF
Press * and connect phone by USB cable
Connecting to Device... OK
Sending preloader ... OK
Sending loader ... OK
Damping ... OK
Damping ... OK
Damping ... OK
Damping ... OK
Damping ... OK
Damping ... OK
Already patched SW
Erasing ... OK
Writing ... OK
After power on phone - connect to UART cable
Phone SN: RQCB402316
Deactivate MSL - OK
Calculated code please wait...
Decrypted time: 86 sec
This is zone 0
[PCK]:Enter this without sim #0141*00000000# this is sim lock
[NCK]:Enter this without sim #0111*31403662# this is net lock
[SCK]:Enter this without sim #0121*00000000# this is CP lock
[SPCK]:Enter this without sim #0133*00000000# this is SP lock
[MCK]:Enter this without sim #0199*83834223# this is Master(freeze) code

Read info - ok
Elapsed time: 132 second, sw ver: 3.5.0038
Put uart cable when box ask for it and all would be fine .Br

make your on thread....................