GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Z3X-Team Products (https://forum.gsmhosting.com/vbb/f453/)
-   -   s5570i hanng on samsung logo (https://forum.gsmhosting.com/vbb/f453/s5570i-hanng-samsung-logo-1669723/)

ajmal786 06-06-2013 19:12

s5570i hanng on samsung logo
 
s5570i hanng on samsung logo

i flash it but same.

how to solved problem?

.::intel32::. 06-06-2013 20:28

1 do hand reset
2 write full dump file with riffbox

SHIJILFONOTLY 06-07-2013 06:55

Hard reset the phone

canliyayin 06-07-2013 08:13

s5570i samsung logo
 
1 Attachment(s)
odin v4.38-configuration file-OPS TASS_v1.0.ops -ARM11boot_GT-S5570.tar and s5570i firmware

ajmal786 06-07-2013 10:59

Quote:

Originally Posted by SHIJILFONOTLY (Post 9483415)
Hard reset the phone


it can't enter recovery/hard reset mode.

ajmal786 06-07-2013 11:11

<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> DefaultCalDataWithBoot_S5570IXXLD6_REV03.tar.md5 is valid.
<OSM> PDA_S5570IXXLD6_REV03.tar.md5 is valid.
<OSM> MODEM_S5570IXXLD6_REV03.tar.md5 is valid.
<OSM> GT-S5570I-MULTI-CSC-OXELB1_RST.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/157> Added!!
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> DefaultCalDataWithBoot_S5570IXXLD6_REV03.tar.md5 is valid.
<OSM> PDA_S5570IXXLD6_REV03.tar.md5 is valid.
<OSM> MODEM_S5570IXXLD6_REV03.tar.md5 is valid.
<OSM> GT-S5570I-MULTI-CSC-OXELB1_RST.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/157> Odin v.3 engine (ID:157)..
<ID:0/157> File analysis..
<ID:0/157> SetupConnection..
<ID:0/157> Initialzation..
<ID:0/157> Set PIT file..
<ID:0/157> DO NOT TURN OFF TARGET!!
<ID:0/157> Get PIT for mapping..
<ID:0/157> Firmware update start..
<ID:0/157> BcmBoot.img
<ID:0/157> NAND Write Start!!
<ID:0/157> HEDGE_NVRAM8_RF_LE.bin
<ID:0/157> sysparm_dep.img
<ID:0/157> Sbl.bin
<ID:0/157> boot.img
<ID:0/157> system.img
<ID:0/157> userdata.img
<ID:0/157> param.lfs
<ID:0/157> BcmCP.img
<ID:0/157> Transmission Complete..
<ID:0/157> Now Writing.. Please wait about 2 minutes
<ID:0/157> Receive Response from boot-loader
<ID:0/157> csc.rfs
<ID:0/157> RQT_CLOSE !!
<ID:0/157> RES OK !!
<ID:0/157> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/157> Removed!!

ajmal786 06-20-2013 15:47

how to fix this problem??

Almost i try with all firmware from support Area but not luck.

AnyOne have tested file please.

need help z3x team please.

.::MASTER ALONE::. 06-20-2013 16:44

Quote:

Originally Posted by ajmal786 (Post 9514839)
how to fix this problem??

Almost i try with all firmware from support Area but not luck.

AnyOne have tested file please.

need help z3x team please.

Boot Repair 1st With Jtag.


BR.
Arsalan gsm2000.


All times are GMT +1. The time now is 09:39.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.16088 seconds with 6 queries

SEO by vBSEO