GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Z3X-Team Products (https://forum.gsmhosting.com/vbb/f453/)
-   -   S9+ ATT Support Read Codes ? [Answered] (https://forum.gsmhosting.com/vbb/f453/s9-att-support-read-codes-answered-2995008/)

Dimortal 11-18-2021 20:34
S9+ ATT Support Read Codes ? [Answered]
 
Hello, is this s9+ att bit 9 supported for read codes ?
Thanks

Code:
Operation: Info
Selected model: SM-G960U1
Software version: 43.19

Searching Samsung modem... detected COM32
Reading phone info...
Model: SM-G965U1
AP version: G965U1UES9FUB1
CSC version: G965U1OYM9FUB1
CP version: G965U1UES9FUB1
Product code: ATT
Phone SN: R38K20G9NHE
IMEI: 35332109xxxxx
Unique number: 988B1048494C315A5930
Reading IMEI... OK
IMEI: 35332109xxxxx
Done with Samsung Tool PRO v.43.19

Z3X 11-18-2021 23:06
Hello. Yes, its supported.
https://z3x-team.com/check-your-phone/

Dimortal 11-25-2021 15:36
not working



Code:
Operation: Read Codes via Server
Selected model: SM-G965U1
Software version: 43.19

Checking Login and Password... OK
Balance: 32 crd.
You have 32 credit(s) left. This operation takes 5 credits. Continue?  Yes
Waiting for device to become ready... OK
Reading phone info...
Model: SM-G965U1
Android version: 10
PDA version: G965U1UES9FUB1
CSC version: G965U1OYM9FUB1
Phone version: G965U1UES9FUB1
Product code: SM-G965UZKAATT
CSC country code: USA
CSC sales code: ATT
Carrier ID: ATT
Phone SN: 48494c315a593098
IMEI: 3533210909xxxxx
HW version: REV1.1
RF cal date: 2018.02.27
Chip name: SDM845
Modem board: SDM845
Security patch: 2021-02-01
Boot Warranty bit: 0
SIM State: ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM33
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM16 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... error (1)
Server error: A new security v2 has been detected and is not currently supported.

Done with Samsung Tool PRO v.43.19

Z3X 11-25-2021 15:52
Quote:
Originally Posted by Dimortal (Post 14483627)
not working



Code:
Operation: Read Codes via Server
Selected model: SM-G965U1
Software version: 43.19

Checking Login and Password... OK
Balance: 32 crd.
You have 32 credit(s) left. This operation takes 5 credits. Continue?  Yes
Waiting for device to become ready... OK
Reading phone info...
Model: SM-G965U1
Android version: 10
PDA version: G965U1UES9FUB1
CSC version: G965U1OYM9FUB1
Phone version: G965U1UES9FUB1
Product code: SM-G965UZKAATT
CSC country code: USA
CSC sales code: ATT
Carrier ID: ATT
Phone SN: 48494c315a593098
IMEI: 3533210909xxxxx
HW version: REV1.1
RF cal date: 2018.02.27
Chip name: SDM845
Modem board: SDM845
Security patch: 2021-02-01
Boot Warranty bit: 0
SIM State: ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM33
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM16 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... error (1)
Server error: A new security v2 has been detected and is not currently supported.

Done with Samsung Tool PRO v.43.19
Seems like this phone was downgraded from another firmware, but security already rewrited from newer firmware. In this case yes, not supported.

Dimortal 11-25-2021 15:55
thanks i did downgrade. i'll try the first bit 9 firmware and post results.

Dimortal 11-25-2021 16:35
Yup same...



Code:
Operation: Read Codes via Server
Selected model: SM-G965U1
Software version: 43.19

Checking Login and Password... OK
Balance: 32 crd.
You have 32 credit(s) left. This operation takes 5 credits. Continue?  Yes
Waiting for device to become ready... OK
Reading phone info...
Model: SM-G965U1
Android version: 10
PDA version: G965U1UES9FUA1
CSC version: G965U1OYM9FUA1
Phone version: G965U1UES9FUA1
Product code: SM-G965UZKAATT
CSC country code: USA
CSC sales code: ATT
Carrier ID: ATT
Phone SN: 48494c315a593098
IMEI: 35332109xxxxx
HW version: REV1.1
RF cal date: 2018.02.27
Chip name: SDM845
Modem board: SDM845
Security patch: 2021-01-01
Boot Warranty bit: 0
SIM State: ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM33
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM16 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... error (1)
Server error: A new security v2 has been detected and is not currently supported.

Done with Samsung Tool PRO v.43.19

Z3X 11-25-2021 16:49
Quote:
Originally Posted by Dimortal (Post 14483664)
Yup same...



Code:
Operation: Read Codes via Server
Selected model: SM-G965U1
Software version: 43.19

Checking Login and Password... OK
Balance: 32 crd.
You have 32 credit(s) left. This operation takes 5 credits. Continue?  Yes
Waiting for device to become ready... OK
Reading phone info...
Model: SM-G965U1
Android version: 10
PDA version: G965U1UES9FUA1
CSC version: G965U1OYM9FUA1
Phone version: G965U1UES9FUA1
Product code: SM-G965UZKAATT
CSC country code: USA
CSC sales code: ATT
Carrier ID: ATT
Phone SN: 48494c315a593098
IMEI: 35332109xxxxx
HW version: REV1.1
RF cal date: 2018.02.27
Chip name: SDM845
Modem board: SDM845
Security patch: 2021-01-01
Boot Warranty bit: 0
SIM State: ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM33
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM16 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... error (1)
Server error: A new security v2 has been detected and is not currently supported.

Done with Samsung Tool PRO v.43.19
Carefully read again my message.


All times are GMT +1. The time now is 17:31.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.13300 seconds with 6 queries

SEO by vBSEO