samsung j100h dad after flash - GSM-Forum

zeromira · 05-17-2017, 15:26

Hi, I had a j100h with a code I did not remember when I had to reset, the key combination did not work and so I flashed. The process is done without mistakes but the phone does not start anymore. It does not go to recovery and not even in download mode, the computer only recognizes it if I press the 2 volume keys and connect the usb: SPRD COM Enumerator. How do I fix it? I've read that could be damaged, somebody can post me the photo of this chip please?

apologized · 05-17-2017, 18:01

dead boot you can fix it by JTAG (easy jtag or atf or ....)
if can't read emmc (damaged) than you should replace it

alamgarh · 05-17-2017, 20:30

Quote:

Originally Posted by zeromira

Hi, I had a j100h with a code I did not remember when I had to reset, the key combination did not work and so I flashed. The process is done without mistakes but the phone does not start anymore. It does not go to recovery and not even in download mode, the computer only recognizes it if I press the 2 volume keys and connect the usb: SPRD COM Enumerator. How do I fix it? I've read that could be damaged, somebody can post me the photo of this chip please?

Only one solution.. change the chip

melvin2K8 · 05-25-2017, 06:06

hi
i have same problem here..
i flash it with the firmware in z3x support i downlod
but after finish flash..theres no error but no power now..
pls give me some other solution exexp easy j-tag...i dont have jtag for now...tx

hkboyz · 05-25-2017, 08:16

Quote:

Originally Posted by alamgarh

Only one solution.. change the chip

https://www.4shared.com/rar/Cwg3mNTY...0h_by_hkb.html

use this file tested and imei available

05-17-2017, 15:26	#1 (permalink)
zeromira Freak Poster Join Date: Apr 2004 Age: 48 Posts: 231 Member: 61809 Status: Offline Thanks Meter: 4	samsung j100h dad after flash Hi, I had a j100h with a code I did not remember when I had to reset, the key combination did not work and so I flashed. The process is done without mistakes but the phone does not start anymore. It does not go to recovery and not even in download mode, the computer only recognizes it if I press the 2 volume keys and connect the usb: SPRD COM Enumerator. How do I fix it? I've read that could be damaged, somebody can post me the photo of this chip please?

05-17-2017, 18:01	#2 (permalink)
apologized No Life Poster Join Date: Jan 2012 Location: Morocco Posts: 1,107 Member: 1712203 Status: Offline Thanks Meter: 354	dead boot you can fix it by JTAG (easy jtag or atf or ....) if can't read emmc (damaged) than you should replace it

05-25-2017, 06:06	#4 (permalink)
melvin2K8 Junior Member Join Date: Aug 2008 Location: Philippines Posts: 8 Member: 850335 Status: Offline Sonork: ala Thanks Meter: 2	hi i have same problem here.. i flash it with the firmware in z3x support i downlod but after finish flash..theres no error but no power now.. pls give me some other solution exexp easy j-tag...i dont have jtag for now...tx