Samsung G935A incorrect unlock code is came. [Answered] - GSM-Forum

caremobiles · 07-27-2021, 11:13

Samsung G935A Readed unlock codes via server.But when I was enter that unlock codes in phone, Incorrect unlock code is came.I was tried to factory reset the phone after that also same issue is came.Please solve my problem.

Here is the log:

Checking Login and Password... OK
Balance: 49 crd.
You have 49 credit(s) left. This operation takes 5 credits. Continue? Yes
Waiting for device to become ready... OK
Reading phone info...
Model: SAMSUNG-SM-G935A
Android version: 8.0.0
PDA version: G935AUCSACSH3
CSC version: G935AATTACSH3
Phone version: G935AUCSACSH3
Product code: SM-G935AZKAATT
CSC country code: USA
CSC sales code: ATT
Phone SN: R38H508H4MH
IMEI: 357xxxxxxxxxxxx
HW version: REV0.7
RF cal date: 2016.05.10
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2019-08-01
Boot Warranty bit: 0
SIM State: ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM79
Reading phone info... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Executing... OK
Searching Ramdump interface... COM17 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 16305184
NET lock: 97195391
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.43.4

Z3X · 07-27-2021, 11:17

Hello. Write combination, then write stock modem and enter codes. After this flash stock firmware. Post result please.

caremobiles · 07-27-2021, 12:24

There is no combination file for this firmware compatible (G935AUCSACSH3).I was searched in google also.Please provide this firmware compatible combination file link.Please sir.If it was delay for given that link customer will taken his phone back.

Z3X · 07-27-2021, 13:26

COMBINATION_ATT_FA60_G935TUCUAASF1 - stored in shell

caremobiles · 07-27-2021, 13:41

Quote:

Originally Posted by Z3X

Hello. Write combination, then write stock modem and enter codes. After this flash stock firmware. Post result please.

I was downloaded that combination file just now.First step 1) Flash that combination file 2) Flash stock modem file only after that combination file flash
3)Now enter that unlock codes. Is this process correct? In this process any IMEI NULL Problem or phone dead risk problem occurs?

Z3X · 07-27-2021, 13:52

No any risk. Yes, its corrent. Flash full combination - flash stock modem - enter codes - flash full stock.

caremobiles · 07-27-2021, 14:00

Sir I was flashed the combination file and flash stock modem and insert the sim phone asks network lock code.I was entered the network lock code which is readed the software via server,Still also incorrect code is came.Now what can I do?

caremobiles · 07-27-2021, 14:22

Sir I was done all the process which you are told.Still also incorrect code is came.Am I take any video for proof?

Z3X · 07-27-2021, 15:05

Yes, send proof please, also we must see modem version in video. But can we try something more? Because codes correct, problem in phones sw. Can you flash combination and try on combination (mean combination firmware and modem)?

caremobiles · 07-27-2021, 15:06

Sir Please reply. I was recorded video of this problem.If you want to see, I will upload this.Is there any necessory for read codes via server one more time?If I read codes from server one more time credits will lessed one more time?And Second time readed codes came another codes?Sorry for my bad english.Please solve this problem sir.Customer given 30 mins more time only.

Z3X · 07-27-2021, 15:17

Quote:

Originally Posted by caremobiles

Sir Please reply. I was recorded video of this problem.If you want to see, I will upload this.Is there any necessory for read codes via server one more time?If I read codes from server one more time credits will lessed one more time?And Second time readed codes came another codes?Sorry for my bad english.Please solve this problem sir.Customer given 30 mins more time only.

You dont need read codes again. This codes are correct. Its issue with this model on latest bits. Flash full combination and try enter codes. Post result.

caremobiles · 07-27-2021, 15:21

Sir now I was flash only combination firmware and try to enter that readed codes,Still also incorrect code is came.

Z3X · 07-27-2021, 15:28

Ok. Repeat please this operation with combination and firmware from upper bit (BIT B) and post result.

caremobiles · 07-27-2021, 15:38

Sir Customer is not given more time.I was asking the time first 15-30 mins.And It was prolonged so much time.He was not accepting for given more time now.So I was given his phone back to him.Please give refund my 5 credits.I will upload the video proof links.

caremobiles · 07-27-2021, 16:14

https://*********/8CkQfejB250

https://*********/joTCPX0_FWM

07-27-2021, 11:13	#1 (permalink)
caremobiles No Life Poster Join Date: Aug 2006 Location: On Earth Posts: 1,240 Member: 332724 Status: Offline Sonork: 100.1605077 Thanks Meter: 231	Samsung G935A incorrect unlock code is came. [Answered] Samsung G935A Readed unlock codes via server.But when I was enter that unlock codes in phone, Incorrect unlock code is came.I was tried to factory reset the phone after that also same issue is came.Please solve my problem. Here is the log: Checking Login and Password... OK Balance: 49 crd. You have 49 credit(s) left. This operation takes 5 credits. Continue? Yes Waiting for device to become ready... OK Reading phone info... Model: SAMSUNG-SM-G935A Android version: 8.0.0 PDA version: G935AUCSACSH3 CSC version: G935AATTACSH3 Phone version: G935AUCSACSH3 Product code: SM-G935AZKAATT CSC country code: USA CSC sales code: ATT Phone SN: R38H508H4MH IMEI: 357xxxxxxxxxxxx HW version: REV0.7 RF cal date: 2016.05.10 Chip name: MSM8996 Modem board: MSM8996 Security patch: 2019-08-01 Boot Warranty bit: 0 SIM State: ABSENT Rebooting phone... OK Waiting ADB device... OK Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Searching Samsung diag port... detected COM79 Reading phone info... OK Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... OK Executing... OK Searching Ramdump interface... COM17 detected Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Freeze code: 16305184 NET lock: 97195391 SUB lock: 00000000 SP lock: 00000000 CP lock: 00000000 For check lock status: *#7465625# Done with Samsung Tool PRO v.43.4

07-27-2021, 11:17	#2 (permalink)
Z3X Product Supporter Join Date: Feb 2008 Location: z3x Posts: 15,910 Member: 706257 Status: Offline Thanks Meter: 5,049	Hello. Write combination, then write stock modem and enter codes. After this flash stock firmware. Post result please. Last edited by Z3X; 07-27-2021 at 11:24.

07-27-2021, 12:24	#3 (permalink)
caremobiles No Life Poster Join Date: Aug 2006 Location: On Earth Posts: 1,240 Member: 332724 Status: Offline Sonork: 100.1605077 Thanks Meter: 231	There is no combination file for this firmware compatible (G935AUCSACSH3).I was searched in google also.Please provide this firmware compatible combination file link.Please sir.If it was delay for given that link customer will taken his phone back.

07-27-2021, 13:26	#4 (permalink)
Z3X Product Supporter Join Date: Feb 2008 Location: z3x Posts: 15,910 Member: 706257 Status: Offline Thanks Meter: 5,049	COMBINATION_ATT_FA60_G935TUCUAASF1 - stored in shell

07-27-2021, 13:52	#6 (permalink)
Z3X Product Supporter Join Date: Feb 2008 Location: z3x Posts: 15,910 Member: 706257 Status: Offline Thanks Meter: 5,049	No any risk. Yes, its corrent. Flash full combination - flash stock modem - enter codes - flash full stock.

07-27-2021, 14:00	#7 (permalink)
caremobiles No Life Poster Join Date: Aug 2006 Location: On Earth Posts: 1,240 Member: 332724 Status: Offline Sonork: 100.1605077 Thanks Meter: 231	Sir I was flashed the combination file and flash stock modem and insert the sim phone asks network lock code.I was entered the network lock code which is readed the software via server,Still also incorrect code is came.Now what can I do?

07-27-2021, 14:22	#8 (permalink)
caremobiles No Life Poster Join Date: Aug 2006 Location: On Earth Posts: 1,240 Member: 332724 Status: Offline Sonork: 100.1605077 Thanks Meter: 231	Sir I was done all the process which you are told.Still also incorrect code is came.Am I take any video for proof?

07-27-2021, 15:05	#9 (permalink)
Z3X Product Supporter Join Date: Feb 2008 Location: z3x Posts: 15,910 Member: 706257 Status: Offline Thanks Meter: 5,049	Yes, send proof please, also we must see modem version in video. But can we try something more? Because codes correct, problem in phones sw. Can you flash combination and try on combination (mean combination firmware and modem)?

07-27-2021, 15:06	#10 (permalink)
caremobiles No Life Poster Join Date: Aug 2006 Location: On Earth Posts: 1,240 Member: 332724 Status: Offline Sonork: 100.1605077 Thanks Meter: 231	Sir Please reply. I was recorded video of this problem.If you want to see, I will upload this.Is there any necessory for read codes via server one more time?If I read codes from server one more time credits will lessed one more time?And Second time readed codes came another codes?Sorry for my bad english.Please solve this problem sir.Customer given 30 mins more time only.

07-27-2021, 15:21	#12 (permalink)
caremobiles No Life Poster Join Date: Aug 2006 Location: On Earth Posts: 1,240 Member: 332724 Status: Offline Sonork: 100.1605077 Thanks Meter: 231	Sir now I was flash only combination firmware and try to enter that readed codes,Still also incorrect code is came.

07-27-2021, 15:28	#13 (permalink)
Z3X Product Supporter Join Date: Feb 2008 Location: z3x Posts: 15,910 Member: 706257 Status: Offline Thanks Meter: 5,049	Ok. Repeat please this operation with combination and firmware from upper bit (BIT B) and post result.

07-27-2021, 15:38	#14 (permalink)
caremobiles No Life Poster Join Date: Aug 2006 Location: On Earth Posts: 1,240 Member: 332724 Status: Offline Sonork: 100.1605077 Thanks Meter: 231	Sir Customer is not given more time.I was asking the time first 15-30 mins.And It was prolonged so much time.He was not accepting for given more time now.So I was given his phone back to him.Please give refund my 5 credits.I will upload the video proof links.

07-27-2021, 16:14	#15 (permalink)
caremobiles No Life Poster Join Date: Aug 2006 Location: On Earth Posts: 1,240 Member: 332724 Status: Offline Sonork: 100.1605077 Thanks Meter: 231	https://*******/8CkQfejB250 https://*******/joTCPX0_FWM