n7100 problem - GSM-Forum

eman_sayed55 · 04-26-2014, 12:59

“Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again“.

mestoo1 · 04-26-2014, 15:31

Flash this firmware
n7100xxuena1_n7100ojvena1_acr

eman_sayed55 · 04-26-2014, 22:33

ID:0/070> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUENA1_N7100OJVENA1_N7100XXUENA3_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/070> Odin v.3 engine (ID:70)..
<ID:0/070> File analysis..
<ID:0/070> SetupConnection..
<ID:0/070> Initialzation..
<ID:0/070> Get PIT for mapping..
<ID:0/070> Firmware update start..
<ID:0/070> SingleDownload.
<ID:0/070> sboot.bin
<ID:0/070> NAND Write Start!!
<ID:0/070> tz.img
<ID:0/070> boot.img
<ID:0/070> recovery.img
<ID:0/070> system.img
<ID:0/070> FAIL!
<ID:0/070>
<ID:0/070> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

any help please

ashrafabdeen · 04-26-2014, 22:37

EMMC chip problem ... u need to replace it

Ben5016 · 04-26-2014, 23:08

Oh no, this is a big problem, not easy to fix.

04-26-2014, 12:59	#1 (permalink)
eman_sayed55 Freak Poster Join Date: Aug 2008 Posts: 150 Member: 850081 Status: Offline Thanks Meter: 15	n7100 problem “Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again“.

04-26-2014, 15:31	#2 (permalink)
mestoo1 Freak Poster Join Date: May 2013 Location: Turkey Posts: 498 Member: 1941192 Status: Offline Thanks Meter: 57	Flash this firmware n7100xxuena1_n7100ojvena1_acr

04-26-2014, 22:33	#3 (permalink)
eman_sayed55 Freak Poster Join Date: Aug 2008 Posts: 150 Member: 850081 Status: Offline Thanks Meter: 15	ID:0/070> Added!! <OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> N7100XXUENA1_N7100OJVENA1_N7100XXUENA3_HOME.tar.md 5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/070> Odin v.3 engine (ID:70).. <ID:0/070> File analysis.. <ID:0/070> SetupConnection.. <ID:0/070> Initialzation.. <ID:0/070> Get PIT for mapping.. <ID:0/070> Firmware update start.. <ID:0/070> SingleDownload. <ID:0/070> sboot.bin <ID:0/070> NAND Write Start!! <ID:0/070> tz.img <ID:0/070> boot.img <ID:0/070> recovery.img <ID:0/070> system.img <ID:0/070> FAIL! <ID:0/070> <ID:0/070> Complete(Write) operation failed. <OSM> All threads completed. (succeed 0 / failed 1) any help please

04-26-2014, 22:37	#4 (permalink)
ashrafabdeen Freak Poster Join Date: Nov 2013 Posts: 129 Member: 2066290 Status: Offline Thanks Meter: 11	EMMC chip problem ... u need to replace it

04-26-2014, 23:08	#5 (permalink)
Ben5016 Freak Poster Join Date: Jun 2003 Location: New York Posts: 376 Member: 31012 Status: Offline Thanks Meter: 6	Oh no, this is a big problem, not easy to fix.