Samsung Tool PRO 32.4 Released. G960F/G965F - Read Codes - 1st in the world. - Page 9 - GSM-Forum

aslam hossain · 05-26-2018, 13:27

Again Update New Version
Samsung Tool PRO 32.4
Download NEW & enjoy.

I am Check Now S8 Plus G955U USA T-Mobile
Unlock Done,
Android version: 7.0

Code:

Operation: Unlock
Selected model: SM-G955U
Selected port: COM272 SAMSUNG Mobile USB Serial Port 
Software version: 32.4

Checking Login and Password... OK
Ballance: 10 crd.
You have 10 credit(s) left. This operation takes 10 credits.Continue?  Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G955U
Android version: 7.0
PDA version: G955USQS2BRB1
CSC version: G955UOYN2BRB1
Phone version: G955USQS2BRB1
Product code: SM-G955UZKATMB
CSC country code: USA
CSC sales code: TMB
Phone SN: R28J31DXXXX
IMEI: 35598008029XXXX
HW version: REV1.0
RF cal date: 2017.03.16
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2018-02-01
Boot Warranty bit: 0
Searching Samsung diag port... detected COM272
Reading phone info... OK
Reading data from phone... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.32.4

Download Samsung Tool PRO 32.4

furgens · 05-26-2018, 17:37

dont work frp samsung SM-J710MN
1. flashing convination
2. adb
3. reset frp ok
4. factory data reset ok
5. flashing system ok
6. frp is loked

obliviousmnd · 05-26-2018, 19:33

Quote:

Originally Posted by furgens

dont work frp samsung SM-J710MN
1. flashing convination
2. adb
3. reset frp ok
4. factory data reset ok
5. flashing system ok
6. frp is loked

that is not how you remove FRP from a combination file. reset FRP only completes setup of phone on stock firmware. if you're on combo file, there is not setup, so doesn't do anythign because nothing to skip

all that button does is send adb command to phone to skip setup. use brain

timperu · 05-27-2018, 02:24

Samsung SM-A520F bit 4 is supported to unlock factory ?

wirelessinfinit · 05-27-2018, 04:06

Quote:

Originally Posted by obliviousmnd

that is not how you remove FRP from a combination file. reset FRP only completes setup of phone on stock firmware. if you're on combo file, there is not setup, so doesn't do anythign because nothing to skip

all that button does is send adb command to phone to skip setup. use brain

hey man yeah that's what I thought too but something has been bothering me.
You know for S8 or Note 8 FRP for the latest BINs. I've noticed that flashing the combo and then flashing it back to stock doesn't remove the FRP however you need to perform the FRP operation + turning on OEM + factory reset while in combo and then flash it back to stock which successfully remove the FRP.

I am not sure why it works that way as I've always understood it as only FRP can only be removed when it's on stock with ADB enabled.

Share some wisdom on this as it's been on my mind

thanks

khaliq aziz hhh · 05-27-2018, 08:04

g532f patch file add

mimo1515 · 05-27-2018, 09:15

Real Big boom updates !
Thank you team for good work!

denard · 05-28-2018, 05:51

J327P bit 4 unlock need please add it

tintome · 05-28-2018, 08:42

Quote:

Originally Posted by yor21

Does there any chance next update .... G965U Sprint unlock ????

Does it work with Unlock TMB ?

@ndoy · 05-28-2018, 11:52

Operation: Read Codes via Server
Selected model: SM-J320ZN
Selected port: COM89 SAMSUNG Mobile USB Serial Port
Software version: 32.4

Checking Login and Password... OK
Ballance: 30 crd.
You have 30 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-J320ZN
Android version: 5.1.1
PDA version: J320ZNDOU1AQB1
CSC version: J320ZNTLP1AQB1
Phone version: J320ZNDOU1APK1
Product code: SM-J320ZZKNTLP
CSC country code: Australia
CSC sales code: TLP
Phone SN: R58J6627W9T
IMEI:
HW version: MP 0.200
RF cal date: 2017.06.28
Chip name: MSM8916
Modem board: MSM8916
Security patch: 2017-02-01
Boot Warranty bit: 0
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... not found

Done with Samsung Tool PRO v.32.4

aminudonatos · 05-28-2018, 12:37

g530t unlock error
Checking Login and Password... OK
Ballance: 40 crd.
You have 40 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G530T
Android version: 5.1.1
PDA version: G530TUVU1AOF8
CSC version: G530TTMB1AOF8
Phone version: G530TUVU1AOF8
Product code: SM2G530TZAPTMB
CSC country code: USA
CSC sales code: TMB
Phone SN: R28GB0FWMKE
IMEI:
HW version: REV0.1
RF cal date: 2015.11.04
Chip name: MSM8916
Modem board: MSM8916
Boot Warranty bit: 1
Checking Super user right... true
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... error (4.7.1)

Done with Samsung Tool PRO v.32.4

satech_gsm · 05-28-2018, 14:08

Quote:

Originally Posted by blang

Samsung Tool PRO 32.0 Released.

New phones added like usually first in the world: S9/S9+ - 10 credits.

- support SM-G960F (Flashing, Read/Write EFS, Direct Read codes via server, reboot download/recovery) - First in the world
- support SM-G960N (Flashing, Read/Write EFS, Direct Read codes via server, reboot download/recovery) - First in the world
- support SM-G965F (Flashing, Read/Write EFS, Direct Read codes via server, reboot download/recovery) - First in the world
- support SM-G965N (Flashing, Read/Write EFS, Direct Read codes via server, reboot download/recovery) - First in the world

Added new method Direct read codes via server for all FW and KNOX supported - 5 credits:

- SC04J (Direct read codes via server for all FW and KNOX)
- SM-A320F (Direct read codes via server for all FW and KNOX)
- SM-A320FL (Direct read codes via server for all FW and KNOX)
- SM-A320Y (Direct read codes via server for all FW and KNOX)
- SM-A520F (Direct read codes via server for all FW and KNOX)
- SM-A520K (Direct read codes via server for all FW and KNOX)
- SM-A520L (Direct read codes via server for all FW and KNOX)
- SM-A520S (Direct read codes via server for all FW and KNOX)
- SM-A520W (Direct read codes via server for all FW and KNOX)
- SM-A530F (Direct read codes via server for all FW and KNOX)
- SM-A530N (Direct read codes via server for all FW and KNOX)
- SM-A530W (Direct read codes via server for all FW and KNOX)
- SM-A720F (Direct read codes via server for all FW and KNOX)
- SM-A720S (Direct read codes via server for all FW and KNOX)
- SM-A730F (Direct read codes via server for all FW and KNOX)
- SM-G610K (Direct read codes via server for all FW and KNOX)
- SM-G610L (Direct read codes via server for all FW and KNOX)
- SM-G610M (Direct read codes via server for all FW and KNOX)
- SM-G610S (Direct read codes via server for all FW and KNOX)
- SM-G610Y (Direct read codes via server for all FW and KNOX)
- SM-G950F (Direct read codes via server for all FW and KNOX)
- SM-G950N (Direct read codes via server for all FW and KNOX)
- SM-G955F (Direct read codes via server for all FW and KNOX)
- SM-G955N (Direct read codes via server for all FW and KNOX)
- SM-J530F (Direct read codes via server for all FW and KNOX)
- SM-J530FM (Direct read codes via server for all FW and KNOX)
- SM-J530G (Direct read codes via server for all FW and KNOX)
- SM-J530GM (Direct read codes via server for all FW and KNOX)
- SM-J530K (Direct read codes via server for all FW and KNOX)
- SM-J530L (Direct read codes via server for all FW and KNOX)
- SM-J530S (Direct read codes via server for all FW and KNOX)
- SM-J530Y (Direct read codes via server for all FW and KNOX)
- SM-J530YM (Direct read codes via server for all FW and KNOX)
- SM-J701F (Direct read codes via server for all FW and KNOX)
- SM-J701M (Direct read codes via server for all FW and KNOX)
- SM-J701MT (Direct read codes via server for all FW and KNOX)

- SM-J720F (Flashing, Read/Write EFS, Direct READ codes via server, reboot download/recovery) - First in the world
- SM-J720M (Flashing, Read/Write EFS, Direct READ codes via server, reboot download/recovery) - First in the world
- SM-G611K (Flashing, Read/Write EFS, Direct READ codes via server, reboot download/recovery) - First in the world
- SM-G611L (Flashing, Read/Write EFS, Direct READ codes via server, reboot download/recovery) - First in the world
- SM-G611M (Flashing, Read/Write EFS, Direct READ codes via server, reboot download/recovery) - First in the world
- SM-G611MT (Flashing, Read/Write EFS, Direct READ codes via server, reboot download/recovery) - First in the world
- SM-G611S (Flashing, Read/Write EFS, Direct READ codes via server, reboot download/recovery) - First in the world

Added new alternative method Direct read codes via server for all FW and KNOX supported - 2 credits.
(You can unlock it without server, root required) your choose what method to use

- SM-A310F
- SM-A310FD
- SM-A310M
- SM-A310MD
- SM-A310N0
- SM-A310Y
- SM-A5108
- SM-A510F
- SM-A510FD
- SM-A510K
- SM-A510L
- SM-A510M
- SM-A510MD
- SM-A510S
- SM-A510Y
- SM-A7108
- SM-A710F
- SM-A710FD
- SM-A710K
- SM-A710L
- SM-A710M
- SM-A710S
- SM-A710Y
- SM-G600F
- SM-G610F
- SM-G611F
- SM-G930F
- SM-G930FD
- SM-G930K
- SM-G930L
- SM-G930S
- SM-G930W8
- SM-G935F
- SM-G935FD
- SM-G935K
- SM-G935L
- SM-G935S
- SM-G935W8
- SM-J7108
- SM-J710F
- SM-J710FN
- SM-J710FQ
- SM-J710GN
- SM-J710K
- SM-J710MN
- SM-N930F
- SM-N930FD
- SM-N930K
- SM-N930L
- SM-N930S
- SM-N935F
- SM-N935K
- SM-N935L
- SM-N935S
- SM-T585
- SM-T585C
- SM-T585N0
- SM-T587

P.S. Enjoy with z3x real exclusive solution.

Please respond to this topic
http://forum.gsmhosting.com/vbb/f453...-gone-2409931/

err0r_ · 05-30-2018, 00:18

@blang so for those of us that lost credits unlocking TMB 8.0 on S8 S8+ will not get their credit refunded ?

its been about a week or more, no respond from support email and no respond from here from you.

i have 30 Credits Charged with no unlock, i PAID $42 from IMEI.US and i have no acknowledgement from Z3X TEAM as TO WHEN IM GETTING MY CREDITS BACK!!!!!

i NEED AN ANSWER NOW AND BY WHEN TO EXPECT MY PAID FOR CREDITS BACK FOR YOUR SYSTEM ERROR.

gprado · 05-30-2018, 00:32

Quote:

Originally Posted by gprado

On G965F/DS, RGCK is read?? Thanks

Regional lock code is readed(or unlocked) by Z3x?

@ndoy · 05-30-2018, 04:08

Checking Login and Password... OK
Ballance: 30 crd.
You have 30 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-J320ZN
Android version: 5.1.1
PDA version: J320ZNDOU1AQB1
CSC version: J320ZNTLP1AQB1
Phone version: J320ZNDOU1APK1
Product code: SM-J320ZZKNTLP
CSC country code: Australia
CSC sales code: TLP
Phone SN: R58J6627W9T
IMEI:
HW version: MP 0.200
RF cal date: 2017.06.28
Chip name: MSM8916
Modem board: MSM8916
Security patch: 2017-02-01
Boot Warranty bit: 0
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM83 detected
Reading data from phone... OK
Calculating... error (3)

Done with Samsung Tool PRO v.32.4

05-27-2018, 08:04	#126 (permalink)
khaliq aziz hhh Junior Member Join Date: Apr 2015 Posts: 15 Member: 2383542 Status: Offline Thanks Meter: 1	g532f g532f patch file add

05-28-2018, 11:52	#130 (permalink)
@ndoy Freak Poster Join Date: Apr 2010 Posts: 238 Member: 1280685 Status: Offline Thanks Meter: 59	SM-J320ZN Read Codes via Server not found Operation: Read Codes via Server Selected model: SM-J320ZN Selected port: COM89 SAMSUNG Mobile USB Serial Port Software version: 32.4 Checking Login and Password... OK Ballance: 30 crd. You have 30 credit(s) left. This operation takes 5 credits.Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-J320ZN Android version: 5.1.1 PDA version: J320ZNDOU1AQB1 CSC version: J320ZNTLP1AQB1 Phone version: J320ZNDOU1APK1 Product code: SM-J320ZZKNTLP CSC country code: Australia CSC sales code: TLP Phone SN: R58J6627W9T IMEI: HW version: MP 0.200 RF cal date: 2017.06.28 Chip name: MSM8916 Modem board: MSM8916 Security patch: 2017-02-01 Boot Warranty bit: 0 Rebooting phone... OK Waiting ADB device... OK Rebooting phone... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Searching Ramdump interface... not found Done with Samsung Tool PRO v.32.4

05-30-2018, 04:08	#135 (permalink)
@ndoy Freak Poster Join Date: Apr 2010 Posts: 238 Member: 1280685 Status: Offline Thanks Meter: 59	Calculating... error (3) Checking Login and Password... OK Ballance: 30 crd. You have 30 credit(s) left. This operation takes 5 credits.Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-J320ZN Android version: 5.1.1 PDA version: J320ZNDOU1AQB1 CSC version: J320ZNTLP1AQB1 Phone version: J320ZNDOU1APK1 Product code: SM-J320ZZKNTLP CSC country code: Australia CSC sales code: TLP Phone SN: R58J6627W9T IMEI: HW version: MP 0.200 RF cal date: 2017.06.28 Chip name: MSM8916 Modem board: MSM8916 Security patch: 2017-02-01 Boot Warranty bit: 0 Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... OK Searching Ramdump interface... COM83 detected Reading data from phone... OK Calculating... error (3) Done with Samsung Tool PRO v.32.4

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-26-2018, 17:37	#122 (permalink)
furgens Junior Member Join Date: Dec 2016 Posts: 13 Member: 2666082 Status: Offline Thanks Meter: 0	dont work frp samsung SM-J710MN 1. flashing convination 2. adb 3. reset frp ok 4. factory data reset ok 5. flashing system ok 6. frp is loked

05-27-2018, 02:24	#124 (permalink)
timperu Junior Member Join Date: Apr 2018 Posts: 23 Member: 2827988 Status: Offline Sonork: Timgsm Thanks Meter: 5	Samsung SM-A520F bit 4 is supported to unlock factory ?

05-27-2018, 09:15	#127 (permalink)
mimo1515 Junior Member Join Date: Apr 2008 Age: 39 Posts: 20 Member: 761041 Status: Offline Thanks Meter: 1	Real Big boom updates ! Thank you team for good work!

05-28-2018, 05:51	#128 (permalink)
denard No Life Poster Join Date: Feb 2005 Location: BAHOUAN Posts: 3,251 Member: 118601 Status: Offline Thanks Meter: 200	J327P bit 4 unlock need please add it

05-28-2018, 12:37	#131 (permalink)
aminudonatos Freak Poster Join Date: Dec 2015 Location: ghana Posts: 194 Member: 2499853 Status: Offline Thanks Meter: 34	g530t unlock error Checking Login and Password... OK Ballance: 40 crd. You have 40 credit(s) left. This operation takes 10 credits.Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-G530T Android version: 5.1.1 PDA version: G530TUVU1AOF8 CSC version: G530TTMB1AOF8 Phone version: G530TUVU1AOF8 Product code: SM2G530TZAPTMB CSC country code: USA CSC sales code: TMB Phone SN: R28GB0FWMKE IMEI: HW version: REV0.1 RF cal date: 2015.11.04 Chip name: MSM8916 Modem board: MSM8916 Boot Warranty bit: 1 Checking Super user right... true Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... Start... OK Initialization... OK Generate and check client proof... OK Verify proof by client... OK Reading data from phone... error (4.7.1) Done with Samsung Tool PRO v.32.4

05-30-2018, 00:18	#133 (permalink)
err0r_ Freak Poster Join Date: Dec 2017 Posts: 196 Member: 2787425 Status: Offline Thanks Meter: 26	@blang so for those of us that lost credits unlocking TMB 8.0 on S8 S8+ will not get their credit refunded ? its been about a week or more, no respond from support email and no respond from here from you. i have 30 Credits Charged with no unlock, i PAID $42 from IMEI.US and i have no acknowledgement from Z3X TEAM as TO WHEN IM GETTING MY CREDITS BACK!!!!! i NEED AN ANSWER NOW AND BY WHEN TO EXPECT MY PAID FOR CREDITS BACK FOR YOUR SYSTEM ERROR.