SM-N910P 6.0.1 Unlock Done. - GSM-Forum

ghacks · 05-24-2016, 04:03

UNLOCK INSTRUCTIONS:
Direct Unlock:
1. Phone must be powered on.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Type *#9090# and choose 'DM/DUN over HSIC'.
4. Reboot phone.
Or use 'Activate Diag' function from 'Repair' tab.
5. Connect USB cable, install drivers if needed.
6. Select Samsung diagnostic port in port settings.
7. Press 'Unlock' button.

Domestic Unlock:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
5. Select device in ADB settings.
6. Press 'Unlock Domestic' button.

Operation: Unlock SPRNT
Selected model: SM-N910P
Selected port: COM32 SAMSUNG Mobile USB Serial Port
Software version: 25.3

Waiting ADB device... OK
Reading phone info...
Model: SM-N910P
Android version: 6.0.1
Product code: Not Active
Phone version: N910PVPU4COJ6
PDA version: N910PVPS4DPD1
CSC version: N910PSPT4DPD1
CSC country code: USA
CSC sales code: SPR
HW version: N910P.05
Phone S/N: 00000000000
Modem board: MDM9625M
RF cal date: 2014.10.06
IMEI:
Initialization AT RIL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.25.3

parin · 05-24-2016, 04:27

Gr8

Sent from my iPhone using Tapatalk

COMPUC3LL77 · 06-04-2016, 18:19

Quote:

Originally Posted by ghacks

UNLOCK INSTRUCTIONS:
Direct Unlock:
1. Phone must be powered on.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Type *#9090# and choose 'DM/DUN over HSIC'.
4. Reboot phone.
Or use 'Activate Diag' function from 'Repair' tab.
5. Connect USB cable, install drivers if needed.
6. Select Samsung diagnostic port in port settings.
7. Press 'Unlock' button.

Domestic Unlock:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
5. Select device in ADB settings.
6. Press 'Unlock Domestic' button.

Operation: Unlock SPRNT
Selected model: SM-N910P
Selected port: COM32 SAMSUNG Mobile USB Serial Port
Software version: 25.3

Waiting ADB device... OK
Reading phone info...
Model: SM-N910P
Android version: 6.0.1
Product code: Not Active
Phone version: N910PVPU4COJ6
PDA version: N910PVPS4DPD1
CSC version: N910PSPT4DPD1
CSC country code: USA
CSC sales code: SPR
HW version: N910P.05
Phone S/N: 00000000000
Modem board: MDM9625M
RF cal date: 2014.10.06
IMEI:
Initialization AT RIL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.25.3

Thanks

Phone must be rooted or not?

asadnow2k · 06-04-2016, 19:28

no need to root sprint phones

ghacks · 06-04-2016, 19:31

are u crazy this fw its 6.0.1 need root and downgrade modem COJ6 i think u have a problem in your eyes

turox88 · 06-09-2016, 21:08

solo deben de entar en ajustes y luego entran en activar dispositivo le dan 2 veces al boton de volumen mas y una al volumen menos y entra en un menu y luego en ese menu entran al testmode luego entran en ue setting y info y luego en setting y luego en protocol y luego en GCF y luego en gsm/e gprs/wcdma gcf on y listo solo lo reinician y listo senal

ghacks · 06-09-2016, 23:18

Quote:

Originally Posted by turox88

solo deben de entar en ajustes y luego entran en activar dispositivo le dan 2 veces al boton de volumen mas y una al volumen menos y entra en un menu y luego en ese menu entran al testmode luego entran en ue setting y info y luego en setting y luego en protocol y luego en GCF y luego en gsm/e gprs/wcdma gcf on y listo solo lo reinician y listo senal

i dont understand this msg

jcdes · 06-10-2016, 04:45

In short he said: Go to settings>activate device>Vol+ twice>Vol- once>enter test mode>ue setting>info>protocol>GCF>gsm/e gprs/wcdma gcf on>reboot and it will have signal...

Just translated... It does not mean that I know if it works or if it is even relevant to unlocking domestic.

ghacks · 06-10-2016, 05:40

Quote:

Originally Posted by jcdes

In short he said: Go to settings>activate device>Vol+ twice>Vol- once>enter test mode>ue setting>info>protocol>GCF>gsm/e gprs/wcdma gcf on>reboot and it will have signal...

Just translated... It does not mean that I know if it works or if it is even relevant to unlocking domestic.

but me i trust on Almighty box like z3x this box have many secret . lollll

way2unlock · 06-10-2016, 11:24

N910P 6.0.1 UNLOCKED DONE WITH ROOT

Waiting ADB device... OK
Reading phone info...
Model: SM-N910P
Android version: 6.0.1
Product code: Not Active
Phone version: N910PVPU4DPE1
PDA version: N910PVPU4DPE1
CSC version: N910PSPT4DPE1
CSC country code: USA
CSC sales code: SPR
HW version: N910P.05
Phone S/N: 00000000000
Modem board: MDM9625M
RF cal date: 2015.04.02
IMEI:
Checking Super user right... true
Initialization AT RIL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.25.5

ghacks · 06-10-2016, 22:55

Quote:

Originally Posted by way2unlock

N910P 6.0.1 UNLOCKED DONE WITH ROOT

Waiting ADB device... OK
Reading phone info...
Model: SM-N910P
Android version: 6.0.1
Product code: Not Active
Phone version: N910PVPU4DPE1
PDA version: N910PVPU4DPE1
CSC version: N910PSPT4DPE1
CSC country code: USA
CSC sales code: SPR
HW version: N910P.05
Phone S/N: 00000000000
Modem board: MDM9625M
RF cal date: 2015.04.02
IMEI:
Checking Super user right... true
Initialization AT RIL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.25.5

very good job bro z3x its best for the moment i tested many cannot unlock some models very important but others cannot remover security..

qtouch · 07-08-2016, 16:58

Quote:

Originally Posted by turox88

solo deben de entar en ajustes y luego entran en activar dispositivo le dan 2 veces al boton de volumen mas y una al volumen menos y entra en un menu y luego en ese menu entran al testmode luego entran en ue setting y info y luego en setting y luego en protocol y luego en GCF y luego en gsm/e gprs/wcdma gcf on y listo solo lo reinician y listo senal

Thanks it actually worked..

Gracias amigo..me sirvio.

tukara · 08-28-2016, 00:09

I tested and works thanks

Quote:

Originally Posted by jcdes

In short he said: Go to settings>activate device>Vol+ twice>Vol- once>enter test mode>ue setting>info>protocol>GCF>gsm/e gprs/wcdma gcf on>reboot and it will have signal...

Just translated... It does not mean that I know if it works or if it is even relevant to unlocking domestic.

click2unloc · 10-20-2016, 11:33

Waiting ADB device... OK
Reading phone info...
Model: SM-N910P
Android version: 6.0.1
Product code: Not Active
Phone version: N910PVPU4DPH4
PDA version: N910PVPU4DPH4
CSC version: N910PSPT4DPH4
CSC country code: USA
CSC sales code: SPR
HW version: N910P.05
Phone SN: 00000000000
Modem board: MDM9625M
RF cal date: 2014.10.11
IMEI:
Writing AT RIL... OK
Initialization AT RIL... root required
Checking Super user right... true
Initialization AT RIL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.26.9

Mobilemobile16 · 11-01-2016, 21:01

excelente mi bro, tenia horas buscando una solucion. Gracias.

05-24-2016, 04:03	#1 (permalink)
ghacks No Life Poster Join Date: Dec 2009 Location: *** Taste Good Age: 39 Posts: 4,066 Member: 1196914 Status: Offline** Sonork: 100.1667938 Thanks Meter: 1,645	SM-N910P 6.0.1 Unlock Done. UNLOCK INSTRUCTIONS: Direct Unlock: 1. Phone must be powered on. 2. Type #0808# and select 'DM+MODEM+ADB'. 3. Type #9090# and choose 'DM/DUN over HSIC'. 4. Reboot phone. Or use 'Activate Diag' function from 'Repair' tab. 5. Connect USB cable, install drivers if needed. 6. Select Samsung diagnostic port in port settings. 7. Press 'Unlock' button. Domestic Unlock: 1. Power on the phone. 2. Enable 'USB debugging' in 'Settings'-'Developer options', tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'. 3. Connect the phone to PC with USB cable, install drivers if needed. 5. Select device in ADB settings. 6. Press 'Unlock Domestic' button. Operation: Unlock SPRNT Selected model: SM-N910P Selected port: COM32 SAMSUNG Mobile USB Serial Port Software version: 25.3 Waiting ADB device... OK Reading phone info... Model: SM-N910P Android version: 6.0.1 Product code: Not Active Phone version: N910PVPU4COJ6 PDA version: N910PVPS4DPD1 CSC version: N910PSPT4DPD1 CSC country code: USA CSC sales code: SPR HW version: N910P.05 Phone S/N: 00000000000 Modem board: MDM9625M RF cal date: 2014.10.06 IMEI: Initialization AT RIL... OK Unlocking... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.25.3

05-24-2016, 04:27	#2 (permalink)
parin Insane Poster Join Date: Jan 2010 Posts: 74 Member: 1206213 Status: Offline Thanks Meter: 4	Gr8 Sent from my iPhone using Tapatalk

06-04-2016, 19:28	#4 (permalink)
asadnow2k No Life Poster Join Date: Nov 2005 Location: Sindhu Desh Age: 36 Posts: 8,135 Member: 199814 Status: Offline Thanks Meter: 1,960	no need to root sprint phones

06-04-2016, 19:31	#5 (permalink)
ghacks No Life Poster Join Date: Dec 2009 Location: *** Taste Good Age: 39 Posts: 4,066 Member: 1196914 Status: Offline** Sonork: 100.1667938 Thanks Meter: 1,645	are u crazy this fw its 6.0.1 need root and downgrade modem COJ6 i think u have a problem in your eyes

06-09-2016, 21:08	#6 (permalink)
turox88 Insane Poster Join Date: Oct 2014 Location: El Salvador Posts: 97 Member: 2274427 Status: Offline Thanks Meter: 23	solo deben de entar en ajustes y luego entran en activar dispositivo le dan 2 veces al boton de volumen mas y una al volumen menos y entra en un menu y luego en ese menu entran al testmode luego entran en ue setting y info y luego en setting y luego en protocol y luego en GCF y luego en gsm/e gprs/wcdma gcf on y listo solo lo reinician y listo senal

06-10-2016, 04:45	#8 (permalink)
jcdes Freak Poster Join Date: Sep 2011 Posts: 470 Member: 1659385 Status: Offline Sonork: 100.1678591 Thanks Meter: 115	In short he said: Go to settings>activate device>Vol+ twice>Vol- once>enter test mode>ue setting>info>protocol>GCF>gsm/e gprs/wcdma gcf on>reboot and it will have signal... Just translated... It does not mean that I know if it works or if it is even relevant to unlocking domestic.

06-10-2016, 11:24	#10 (permalink)
way2unlock No Life Poster Join Date: Sep 2007 Location: EARTH Age: 42 Posts: 541 Member: 582682 Status: Offline Sonork: 100.1607124 Thanks Meter: 136	N910P 6.0.1 UNLOCKED DONE WITH ROOT Waiting ADB device... OK Reading phone info... Model: SM-N910P Android version: 6.0.1 Product code: Not Active Phone version: N910PVPU4DPE1 PDA version: N910PVPU4DPE1 CSC version: N910PSPT4DPE1 CSC country code: USA CSC sales code: SPR HW version: N910P.05 Phone S/N: 00000000000 Modem board: MDM9625M RF cal date: 2015.04.02 IMEI: Checking Super user right... true Initialization AT RIL... OK Unlocking... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.25.5

10-20-2016, 11:33	#14 (permalink)
click2unloc Junior Member Join Date: Mar 2016 Location: mumbai Posts: 27 Member: 2551712 Status: Offline Sonork: 126582 Thanks Meter: 2	Waiting ADB device... OK Reading phone info... Model: SM-N910P Android version: 6.0.1 Product code: Not Active Phone version: N910PVPU4DPH4 PDA version: N910PVPU4DPH4 CSC version: N910PSPT4DPH4 CSC country code: USA CSC sales code: SPR HW version: N910P.05 Phone SN: 00000000000 Modem board: MDM9625M RF cal date: 2014.10.11 IMEI: Writing AT RIL... OK Initialization AT RIL... root required Checking Super user right... true Initialization AT RIL... OK Unlocking... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.26.9

11-01-2016, 21:01	#15 (permalink)
Mobilemobile16 Insane Poster Join Date: Feb 2016 Posts: 81 Member: 2531299 Status: Offline Thanks Meter: 6	excelente mi bro, tenia horas buscando una solucion. Gracias.