S5230 freeeze at samsung logo

[LEENO]

it comed dead,

I succesfull restored boot

then i powered it and show for insert user code, so i flashed it for erase user code.

Every flash i used make phone freeze at samsung logo,

i flashed with
S5230
S5230G
S5230M
S5230H
S5230R

if i try to full flash phone with boot too, it become dead and i have to restore boot

[LEENO]

it is S5230G, because sim reader is for S5230G,
but flashing with S5230G it still freeze at samsung logo
and flashing S5230G bootfiles, it become dead

[francoo]

QUALCOMM PHONE FREEZE SOLUTION RANGE, WITH ANY BOX THAT SUPPORT THE MODEL AND HAVE THE OPTION CODES READ ... IN THIS CASE HAS BEEN USED THE WAY OF TESTING TWISTER WITH A PHONE F480 ...




1 .- INSERT ON CHIP AND TELEPHONE




2 .- expected to change QUALCOMM WAY, THEN CLICK TO BE CONFIRMED




3 .- CONNECT USB PHONE CABLE - PC (INSTALL DRIVER QUALCOMM), MODE and press SELECT QUALCOMM QCDI INFO




4 .- CHIP IN, ON PHONE




5 .- UNFREEZE LOGIN CODES




6 .- Wait a few seconds will give us the OPTION NETWORK LOCK




7 .- CODE ENTER THE NET OR SIMLOCK and press OK




8 .- READY FREE PHONE


MAY BE USED ANY BOX, YOU READ CODES Optionally, THE PROCEDURE IS THE SAME, test more MODELS AND COMMENT!

[LEENO]

it isn't locked,
it hang at samsung logo so can't install drivers

[fun]

Full flash with MultiLoader_V5.62 including boot.

[LEENO]

When i include boot, it become dead

[fun]

Originally Posted by LEENO

When i include boot, it become dead

Did you flash with Multiloader?

[LEENO]

Yes, multiloader 5.62

[LEENO]

Repair boot work only wirh riff,

Z3x boot repair
Show error selecting S5230, S5230G, S5230W,
give succes selecting S5230m but phone dead and not go in download mode

Then i repaired boot with riff,
Phone in download mode,
Flashed with multioader 5.62 with s5230M including boot but phone dead after sendibg boot

[fun]

Try full flash with S5230XEII4 using Multiloader

[LEENO]

is the same,
dead after sending bootfiles

[Punto-Móvil]

Originally Posted by LEENO

is the same,
dead after sending bootfiles

I got the same problem brother with a samsung s5230w
after phone dead i repaired boot with Z3X choosing s5230 model
i flashed the phone with latest software from support (S523WXEKC1_SER_SEB_CIS) with downloader v5.65 .phone powered on but stucked at samsung logo i again repaired boot with Z3X choosing S5230W,After boot repair done phone powered on correctly unlocked too.

and here is the log of boot repair :

File not selected
Selected model: S5230
Selected com port: COM5
Selected speed port: 921600
Connect phone and press power on 10 second
Start repair boot zone type 1...
Unpress power button on phone !
Repair - boot ok
Elapsed time: 27 second, sw ver: 3.5.0030
-------------------------------------------------------------------------------
Selected model: S5230W
Selected com port: COM5
Selected speed port: 921600
Connect phone and press power on 10 second
Start repair boot zone type 2...
Unpress power button on phone !
Repair - boot ok
Elapsed time: 22 second, sw ver: 3.5.0030
-------------------------------------------------------------------------------
Selected model: S5230W
Selected com port: COM5
Selected speed port: 921600
Phone must be ON
Search modem ... OK
Search modem on:COM9
Phone IMEI: 35457xxxxxxxxxx /1
Phone S/N: RV3B237800
Detecting UART port..... OK
Repower phone - please wait
Phone must be ON
Search modem ... OK
Search modem on:COM11
Net locks - cleared
Reset phone code to - > 00000000
Reset sim block code to - > 00000000
Elapsed time: 46 second, sw ver: 3.5.0030
-------------------------------------------------------------------------------