samsung j415f dead after flash combination file [Answered] - GSM-Forum

bherkund · 01-03-2021, 13:47

hello friends

i got a j410f hang on logo, i hard reset it manualy by botton, the phone has powered on normaly with frp, so i flashed it with combination file fromp z3x support, and try to reset frp with no luck because of the oem disabled,

i usuly flash system, boot, recovery without userdata from a full flash after the combination, to make oem apear, i did it this time with this phone, then the phone remain start in samsung logo, then recovery menu aprer for one second, then the phone power off,

now i can't enter download mode with vol+ +vol - + usb to pc, and i can't withotg too !

any idea how to make it enter to download mode again ?

thanks

Z3X · 01-03-2021, 14:51

Hello. Now phone totally dead or can draw logo?

bherkund · 01-04-2021, 13:32

Quote:

Originally Posted by Z3X

Hello. Now phone totally dead or can draw logo?

now when pressed dual volume up and down plus power button then set on show logo then suddenly goes to show recovery and immediately turns it off automatically.
and not going via button to download mode or recovery.

Z3X · 01-04-2021, 14:59

Try use jig, try enter download holding vol keys and plug cably in pc.

bherkund · 01-05-2021, 16:12

Quote:

Originally Posted by Z3X

Try use jig, try enter download holding vol keys and plug cably in pc.

i tried jig and also button combination also tried usb pluged unpluged etc
same condition

pintu_das · 04-19-2021, 09:57

Quote:

Originally Posted by bherkund

i tried jig and also button combination also tried usb pluged unpluged etc
same condition

https://forum.gsmhosting.com/vbb/f77.../#post14377389

01-03-2021, 13:47	#1 (permalink)
bherkund No Life Poster Join Date: Sep 2009 Location: pakistan Posts: 1,392 Member: 1119917 Status: Offline Sonork: nedi Thanks Meter: 190	samsung j415f dead after flash combination file [Answered] hello friends i got a j410f hang on logo, i hard reset it manualy by botton, the phone has powered on normaly with frp, so i flashed it with combination file fromp z3x support, and try to reset frp with no luck because of the oem disabled, i usuly flash system, boot, recovery without userdata from a full flash after the combination, to make oem apear, i did it this time with this phone, then the phone remain start in samsung logo, then recovery menu aprer for one second, then the phone power off, now i can't enter download mode with vol+ +vol - + usb to pc, and i can't withotg too ! any idea how to make it enter to download mode again ? thanks

01-03-2021, 14:51	#2 (permalink)
Z3X Product Supporter Join Date: Feb 2008 Location: z3x Posts: 16,232 Member: 706257 Status: Offline Thanks Meter: 5,121	Hello. Now phone totally dead or can draw logo?

01-04-2021, 14:59	#4 (permalink)
Z3X Product Supporter Join Date: Feb 2008 Location: z3x Posts: 16,232 Member: 706257 Status: Offline Thanks Meter: 5,121	Try use jig, try enter download holding vol keys and plug cably in pc.