zte-x760 success unlock by Z3X MediaTek Smart Tool
 

zte -x760 orange

unlock done by z3x box

http://i218.photobucket.com/albums/c..._23/jujard.jpg


:):):):):)

nice z3x team.....

thx u very much for ur repost

Selected model is:Generic MT6226 NOR:16Mb
Welcome to MTKModule v 1.03 Card S/N:****:****
BROM.DLL Version :BROM_DLL_v3.920.00 From 2009/10/06 17:50:04
META.DLL Version :META_DLL_v5.808.00 From 2009/10/06 17:50:04
Selected model is:ZTE X760
Selected model is:ZTE X760
Starting flasher module.... [BOOT_MODE]
Reconnect battery and press power button now!
Error: S_BROM_FAIL_TO_GET_BBCHIP_HW_VER(2022)
BOOT Analisys failed...
Selected model is:ZTE X760
Starting flasher module.... [BOOT_MODE]
Reconnect battery and press power button now!
Booting... You can release power key now!
Project Name: MT6225_S00
RAM Detected : 64Mb SRAM
NOR Detected : (128Mb+64Mb) [SPANSION] S71PL127N
NAND Detected : N/A
Advanced detection information:
BBCHIP: "MT6225_S00", EXT_26M
CODE(0x6225), VER(0x8A05), SW(0x8A00)
NOR_ID: "[SPANSION] S71PL127N"
NOR_ID: 0x0001, 0x227E, 0x2220, 0x2200
NAND_ID: "NAND_UNKNOWN"
NAND_ID: 0x0000, 0x0000, 0x0000, 0x0000
Detection Done!
Reading NOR : "C:\Program Files\Z3X\MTK\MTKBOOT.TMP", 0x00000000:0x00040000
Operation Done!
Setting NOR buffer size :1000000
PostProcessing Boot File
ROMINFO V4 Structure found!
Ver.:ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X760_Z15CH_ DEFRIT_BFFA102.BIN
Platform:X760_Z15CH_DeFrIt_BFFA102
Filesystem:00E00000:00200000
Security:00396F94:00000074
Done!
Wait for target power On ...
Connected in META Mode. (Release Pwr Button!)
BaseBand Chip version : MT6225, E05
DSP Firmware ver. : 2006.06.14
Software version : X760_Z15CH_DeFrIt_BFFA102
Hardware version : ZTEMT25_07A_HW_C
Melody version : Melody V0.0
Test Mode OK.
System Disk Mounted... Size:1150976 , Free:366592
Reading NVM Data...
Decoding...
Setting Userlock to:1111
Writing...
Verify...
Unmounting FS...
Shutting Down the phone...
Unlock Done...


this is great and work as rest part of this tool
thanks boys

which cable u use i m try v360 usb cable but could not conect fone plezzzzzzz helpe me

You can calculate NCK witout use of cable ;-)

use X760 cable. NOT USB.

rx,tx,gnd tp on boad and unlock