Full Guide to Jailbreak iOS 4 for Windows Users Using Sn0wbreeze

[AhmedOmarz]

Sn0wbreeze V1.6 has been Released minutes ago to Jailbreak iPhone 3GS, iPhone 3G, iPod 2G on iOS 4 for Windows users, Now I tried it and it's working on Windows, So if you didn't jailbreak yet (or don't know how) here's the step by step guide posted below..
Steps:
Step 1: Download and Install iTunes 9.2 from Here.
Step 2: Now Start iTunes, then Back up all your Data by Right click on iPhone (on right side of iTunes) then Click on Backup
Step 3: Download Sn0wbreeze V1.6 from Here and iOS 4 original firmware from Here.
Step 4: Start Sn0wbreeze and Select "Simple Mode"

[IMG]http://3.bp.********.com/_xODgVRIsPR8/TCLgu_LjtpI/AAAAAAAAApA/hH7wRPe7XU8/s400/sn0wbreeze1.jpg[/IMG]

Step 5: Click browse and select the iOS 4 firmware that you had downloaded for your iPhone.

[IMG]http://1.bp.********.com/_xODgVRIsPR8/TCLg3PGk-sI/AAAAAAAAApI/4oKSC02doFE/s400/sn0wbreeze2.jpg[/IMG]

Step 6: Now, if you selected the right firmware, Sn0wbreeze will show you the following page, Click on the blue arrow

[IMG]http://2.bp.********.com/_xODgVRIsPR8/TCLg8ZUwNJI/AAAAAAAAApQ/5C3hHpFnIIg/s400/sn0wbreeze3.jpg[/IMG]

Step 7: Sn0wbreeze will asks you if you have activated iPhone click on "Yes
Step 8: Now Sn0wbreeze should creat your Custom Firmware

[IMG]http://1.bp.********.com/_xODgVRIsPR8/TCLhleqzvUI/AAAAAAAAApY/GN-94gjCPbA/s400/sn0wbreeze1.jpg[/IMG]

Step 9: Now Sn0wbreeze should Done with the Custom Firmware as the following

[IMG]http://4.bp.********.com/_xODgVRIsPR8/TCLiDYbuyzI/AAAAAAAAApg/JMwICbwtAJU/s400/sn0wbreeze1.jpg[/IMG]

Step 10: Once the .ipsw file created, navigate to itunes, Click on iPhone on the left, then hold left “alt” button (“Shift” button on Windows) on the keyboard and then click on “Restore” then release the alt button
Step 11: iTunes now should ask you about the .ipsw file, head up it to the created custom firmware by Sn0wbreeze
Step 12: Now, Sit back and let iTunes do it.. After several steps of installing the new firmware, Your device should be Jailbroken Successfully

Now, You will be Easily able to Unlock your iPhone 3GS on any Baseband Including 05.13.04 / 05.12.01 Using Ultrasn0w 0.93, Step by Step guide posted here.

[Fet0s]

some one tested? and can confirm that its work after ultrasn0w nstallation

[harim_1981]

link invalid there know

[sam3578]

please re post the link its was deleted

Invalid or Deleted File
The key you provided for file download was invalid. This is usually caused because the file is no longer stored on Mediafire. This occurs when the file is removed by the originating user or Mediafire.
Click here to view our help resources

[neo_49]

Download from here sn0wbreeze-V1.6.1.exe
REGARDS

[AhmedOmarz]

what link are you talking about ??

[AhmedOmarz]

Oh, Sn0wbreeze link has been deleted sorry i will upload now

[AhmedOmarz]

Download from iH8sn0w.com | Jailbreak your iPod touches and iPhones he updated the link whenever it's deleted

[robert32409]

is this working on the newboot iphone 3gs ?

[doller]

custom firmware by Sn0wbreeze not restore with i-tunes

[frooze_angel]

for old boot only, not for new boot..

[kings121]

but there is alot of solutions coming for old boot rom........now we need solution for new boot rom

[kings121]

Originally Posted by AhmedOmarz

Sn0wbreeze V1.6 has been Released minutes ago to Jailbreak iPhone 3GS, iPhone 3G, iPod 2G on iOS 4 for Windows users, Now I tried it and it's working on Windows, So if you didn't jailbreak yet (or don't know how) here's the step by step guide posted below..
Steps:
Step 1: Download and Install iTunes 9.2 from Here.
Step 2: Now Start iTunes, then Back up all your Data by Right click on iPhone (on right side of iTunes) then Click on Backup
Step 3: Download Sn0wbreeze V1.6 from Here and iOS 4 original firmware from Here.
Step 4: Start Sn0wbreeze and Select "Simple Mode"

[IMG]http://3.bp.********.com/_xODgVRIsPR8/TCLgu_LjtpI/AAAAAAAAApA/hH7wRPe7XU8/s400/sn0wbreeze1.jpg[/IMG]

Step 5: Click browse and select the iOS 4 firmware that you had downloaded for your iPhone.

[IMG]http://1.bp.********.com/_xODgVRIsPR8/TCLg3PGk-sI/AAAAAAAAApI/4oKSC02doFE/s400/sn0wbreeze2.jpg[/IMG]

Step 6: Now, if you selected the right firmware, Sn0wbreeze will show you the following page, Click on the blue arrow

[IMG]http://2.bp.********.com/_xODgVRIsPR8/TCLg8ZUwNJI/AAAAAAAAApQ/5C3hHpFnIIg/s400/sn0wbreeze3.jpg[/IMG]

Step 7: Sn0wbreeze will asks you if you have activated iPhone click on "Yes
Step 8: Now Sn0wbreeze should creat your Custom Firmware

[IMG]http://1.bp.********.com/_xODgVRIsPR8/TCLhleqzvUI/AAAAAAAAApY/GN-94gjCPbA/s400/sn0wbreeze1.jpg[/IMG]

Step 9: Now Sn0wbreeze should Done with the Custom Firmware as the following

[IMG]http://4.bp.********.com/_xODgVRIsPR8/TCLiDYbuyzI/AAAAAAAAApg/JMwICbwtAJU/s400/sn0wbreeze1.jpg[/IMG]

Step 10: Once the .ipsw file created, navigate to itunes, Click on iPhone on the left, then hold left “alt” button (“Shift” button on Windows) on the keyboard and then click on “Restore” then release the alt button
Step 11: iTunes now should ask you about the .ipsw file, head up it to the created custom firmware by Sn0wbreeze
Step 12: Now, Sit back and let iTunes do it.. After several steps of installing the new firmware, Your device should be Jailbroken Successfully

Now, You will be Easily able to Unlock your iPhone 3GS on any Baseband Including 05.13.04 / 05.12.01 Using Ultrasn0w 0.93, Step by Step guide posted here.

can this work with old boot rom?

[Leonard_Kyle]

can this support 6.4 bootrom?

[eyestrain]

sad to say almost all 3gs release on our area has a new bootrom,

so this is no use for that,
hope they will release support for new bootrom