help with pinout for CECT KA08 mini iphone clone hi all , i need some help with pinout for CECT KA08 mini iphone clone. Which pinout should I use for flashing this phone . |
Hi all, I have a KA08 mini and i am interested to know what firmware version i have, how can i find out, and also how can i upload the latest version, all help is welcome. Where can i get the latest firmware from? Regards steve |
some one help for this issue. ka08 pinout |
Have a look here maybe you'll find what you're looking for : This Link |
Thanks for sharing , I all ready tried to use the 1,9 – GND 2 - + VCC 3 – RX 4 – TX This pinout not working, tried all the mtk flashing tools by all version , tried the Spiderman too. Not working . |
hi guys , finaly i read ka08 firmware . i used usb to serial cable with the 2303hcx chip. used the rx and tx from the cable to pin 3 and pin 4 (phone) |
Cool :-) Could you upload the FW and share it with us, please :) Edit: So, what is the correct pinout then? Gnd= Rx= Tx= |
Ka08 firmware file Here is ka08 flash firmware file . http://www.filefactory.com/file/aha66dh/n/ka08-16_bin I used the mtk flash tool to read the phone. Used modified USB to serial cable with 2303hxc chip . The pinout that I used is : RX – 3 TX – 4 GND -9 |
hello, Can you help me to pinout firmware ka08? Can you give the information to pinout firmware? Do you have a tuto? Do you have modified the USB cable? Best regards |
Quote:
what cable you have used? tanks |
Here are some photos include the method I used to modify the cable , I used Samsung e700 cable . Took LC12 connector and soldered 2,3,4 and 9 pin – I cast on the connector some hot glue to hardened it , then I connected the to some kind of array that gave me some simplicity to connect the other end of cable (e700 cable). Again the pinout for reading the flash file is : Rx – 3 Tx – 4 GND – 9 For flashing the phone just add the vcc + to pin 2 of the phone , vcc is the the red wire from the USB cable . http://img36.imageshack.us/img36/9489/dscn0692j.jpg |
hi everybody can u tell me if i can use Cable Compatible for China16 (CECT-N168 / Nokia-N800 - 12 pin) USB Unlocking http://www.ipmart.com/main/product/C...php?prod=27068 |
and do u have movie that showing how u did the cable and flash the phone? |
Tested ? Anyone has tested this method??? I buyed the E700 cable but I am waiting because I buyed online. |
Quote:
For me, viewing from the rear, the connector's pin should be like this : ____________ \1 3 5 7 9 11/ \2 4 6 8 10 12/ Anyone can confirm this ? Thanks Ck |
Quote:
pin 1 ---Diod 4007 found in any mobile charger---- pin 1 try this, but I think this is a fake because I tested too. If you can read the firmware, please, post a tutorial here. |
Hi... i have a ka08 and dissasembled original headphone... comfirmed... pin 1 is under the battery pins... confirmed with a multimeter tapping internal shields of the phone.. pin9 is gnd... 10-11-12 are L-R audio and microphone |
Confirmed 3,4,9 pin for flash. I can flash the phone, but I can't read the original. Can anyone helpme?? I go to "Readback" Start adress = 0x00000000 Length = 0x00FFFFFF Ok. Click on "Read back" button. I conect the flash cable, press ON Buttom and the flastool start. At 78% I Receive this error: http://img513.imageshack.us/img513/2347/errorzqp.jpg I need help. |
@felisuki Try once again .It should work. |
YES !!! I read the firmware setting the speed to 57600 baud. It's too slow, 1 hour, but its Ok. Thanks to all !!! |
Congrats :) Are you going to post your firmware, please :) |
can anyone uplode hebrew flash file for this phone thanks yaniv |
I have a CETC KA08 and the pinout is different 1=n.c. (not conn.) 2=5v from charger or usb red cable 3=?nc 4= green cable usb 5= white cable usb 6=? nc (tx serial port?) 7=?nc (rx serial port?) 8= gnd 9= left headphone 10=gnd headphone 11=right headphone 12= mic What are the pin serial cable?please helpme! |
Try this. 3-tx 4-rx 9gnd only change 3rx-4tx / 3tx-4rx |
i found pinouts but..... i have found the pinouts : 1 nc 2 5v charger 3 nc 4 green usb 5 white usb 6 tx serial 7 rx serial 8 gnd for charger,usb and serial? 9 left headphone 10 gnd headphone and mic 11 right headphone 12 mic but my mini ka08 is a clone? the firmware is MAUI.07B.W08.16.MPV4.F1 BRANCH:07B L01_GEMINI_07B BUILD:BUILD_NO SERIAL#: MT012345678901234567 10 BUILD TIME 2009/04/16 16:49 the colours of the battery is gold 1380 ma h i have formatted with mtk tools and spiderman but not work because i not know begin and format lengt i have format auto i'm very stupid ,i make backup but not work i need the complete firmware because i have format all please contact me if is possible reanimate the phone i'm italian and i apologize for my bad english my email is [email protected] |
Hello everyone, how can I change the USB cable?? what pins should I put? |
KA08 pinouts tx rx 1 Attachment(s) ka08 pinouts on motherboard . tested with infinity box |
Hi, I also have KA08 and the folowing is the pinout I have: 1 - +5V 2 - ? 3 - GND 4 - ? 5 - ? 6 - ? 7 - White USB 8 - Green USB 9 - GND 10 - Left/Right Headphone 11 - Left/Right Headphone 12 - MIC + What pin is rx/tx? thanks. |
It seems that I have AK08 phone (but was sold as KA08) pinout is : 1 - +5V Charge 2 - +VBAT 3 - GND 4 - to Tx 5 - to Rx 6 - ? 7 - White USB 8 - Green USB 9 - GND 10 - Left/Right Headphone 11 - Left/Right Headphone 12 - MIC + |
All times are GMT +1. The time now is 10:58. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -