GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > GSM & CDMA Phones / Tablets Software & Hardware Area > Chinese Models & Cloned Phones

Chinese Models & Cloned Phones All China Phone Platforms like (MTK, Spreadtrum.. etc.) Cloned Nokia Nokla & Motorola . etc. Phones are included

Reply
 
LinkBack Thread Tools Display Modes
Old 11-08-2016, 08:10   #1 (permalink)
No Life Poster
 
Join Date: Jun 2007
Posts: 784
Member: 532257
Status: Offline
Sonork: 1624266
Thanks Meter: 64
i9082 daed after flash plz help


miracel bin file scater file errer
log here

all log all deatail here same file tested writabel need plz
______________________________
MT657x ANDROID NFB File:
None Table
The File Information:
LCSH15CU_PCB01_GPRS_MT6575_S01.MAUI_11AMD_W11_50_S P_V30_P2.BIN_FLNPF38F5060M0Y3DG
Definition Applied
1. Power Off Phone , Remove Battery, Insert Battery Back
2. Insert USB cable. In some cases Required Hold BootKey
3. Use Miracle Boot Key In cases Boot key not Find
4. Battery Should be Charged more then 50%
Waiting for USB Port...
Set MTK USB Port (COM39)
Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU: MT6575 SW: E201 Ver: CB00
Downloading Boot8 ...
EMMC Size: 0x00E9000000
Flash Type: EMMC
INT/EXT RAM Size: 0x20000/0x0
Waiting for USB Port...
Set MediaTek DA USB VCOM Port (COM42)
>>EMMC File, EXIT



cm2 read flash ok but writing time sonthing wrong erer
MT6575___GT-I9082__GT-I9082__4.2.2__ALPS.JB.MP.V1.16

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Model : GT-I9082
Device CPU : MT6575
Device IntName : GT-I9082
Device Version : 4.2.2
Device Compile : 5/29/2015 9:40:43 AM
Device Project : ALPS.JB.MP.V1.16
Device ExtInfo : GT-I9082




Supported BootLoader HW :
FlashID [0] CID : 1501004E4A5330304D , Name : NJS00M , Vendor : 15 , [SAMSUNG]
FlashID [1] CID : 90014A2058494E5948 , Name : XINYH , Vendor : 90 , [HYNIX]
FlashID [2] CID : 1501004E355530304D , Name : N5U00M , Vendor : 15 , [SAMSUNG]
FlashID [3] CID : 7001004D4D43303447 , Name : MMC04G , Vendor : 70 , [KINGSTON]
FlashID [4] CID : 110100303034473930 , Name : 004G90 , Vendor : 11 , [TOSHIBA]
FlashID [5] CID : 90014A483447316404 , Name : H4G1d , Vendor : 90 , [HYNIX]
FlashID [6] CID : 45010053454D303447 , Name : SEM04G , Vendor : 45 , [SANDISK]
FlashID [7] CID : FE014E503058585858 , Name : P0XXXX , Vendor : FE , [MICRON]
FlashID [8] CID : 1501004E35575A4D42 , Name : N5WZMB , Vendor : 15 , [SAMSUNG]
FlashID [9] CID : FE014E50314A353441 , Name : P1J54A , Vendor : FE , [MICRON]

Device Memory Details ( installed ) :
RAM : [DRAM_NOT_INIT]
ROM : eMMC 4 GiB
Manufacturer : [SAMSUNG]
Name : M00U5
plz help me boss
  Reply With Quote
Old 11-08-2016, 08:46   #2 (permalink)
No Life Poster
 
Join Date: Jun 2007
Posts: 784
Member: 532257
Status: Offline
Sonork: 1624266
Thanks Meter: 64
Device Model : GT-I9082
Device CPU : MT6575
Device IntName : GT-I9082
Device Version : 4.2.2
Device Compile : 5/29/2015 9:40:43 AM
Device Project : ALPS.JB.MP.V1.16
Device ExtInfo : GT-I9082
Ready to Flash!

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 39 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6575
BB_CPU_NME : [MediaTek] MT6575|MT6577_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0xE201
Processing BROM stage
i2c Init : 00000000
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x84
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , M00U5
[eMMC] : FLASH_CID : 1501004E355530304D0204F7324B2111
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0xB5A9BA64C2CC0767961B8DD5CBB4A9B6
INT RAM : 0x00020000
EXT RAM : 0x00000000 [DRAM_NOT_INIT]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6575 , Project : MTK6575 , Storage : eMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

Switching to HSUSB
HSUSB Init Ok
DRAM not initialized , will try init now
DRAM init passed , 0x20000000

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : Old Dedvice , skip BatteryLevel check

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000000600000-0x0000000000060000
Erase : 0x0000000000D80000-0x0000000069E64000
Flash Pre-Erase Done, time used : 00:00:00

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ...
Use : preloader_hexing75_jb.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : FFFFFFFF
PartErr : Not initialized , will update PMT now ...
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : MBR
Image Flash Ok
Flash now : EBR1
Image Flash Ok
Flash now : UBOOT
Image Flash Ok
Flash now : BOOTIMG
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : SEC_RO
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : EBR2
Image Flash Ok
Flash now : ANDROID
Write Error , code 0x001! Something went wrong!

Operation Failed
Elapsed: 00:01:05
Reconnect Power/Cable!
with cm2 orignal read file same errer


try all erase somthing other but same
  Reply With Quote
Old 11-08-2016, 08:57   #3 (permalink)
Registered User
 
Join Date: Dec 2015
Location: Chittagong, Bangladesh
Posts: 405
Member: 2506300
Status: Offline
Thanks Meter: 345
Use SP tool Select Scatter Use Format all+Download
  Reply With Quote
Old 11-08-2016, 11:22   #4 (permalink)
No Life Poster
 
Join Date: Jun 2007
Posts: 784
Member: 532257
Status: Offline
Sonork: 1624266
Thanks Meter: 64
Wait for phone...
Device boot not done
Check Drivers
Try again

Boot Error!

Operation Failed
Elapsed: 00:00:29
Reconnect Power/Cable!


Operation : Flash Erase [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 39 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6575
BB_CPU_NME : [MediaTek] MT6575|MT6577_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0xE201
Processing BROM stage
i2c Init : 00000000
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x84
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , M00U5
[eMMC] : FLASH_CID : 1501004E355530304D0204F7324B2111
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0xB5A9BA64C2CC0767961B8DD5CBB4A9B6
INT RAM : 0x00020000
EXT RAM : 0x00000000 [DRAM_NOT_INIT]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Erase Flash now ...
Keep Preloader alive
Flash erase done

Done!
Elapsed: 00:00:13
Reconnect Power/Cable!


try cm2 erse but same
  Reply With Quote
Old 11-08-2016, 11:56   #5 (permalink)
No Life Poster
 
Join Date: Jun 2007
Posts: 784
Member: 532257
Status: Offline
Sonork: 1624266
Thanks Meter: 64
Card found : S/N : CDFF8E76 , v0134
Chinese Miracle II [MTK module] v 1.58

Operation : Flash Erase [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 39 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6575
BB_CPU_NME : [MediaTek] MT6575|MT6577_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0xE201
Processing BROM stage
i2c Init : 00000000
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x84
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , M00U5
[eMMC] : FLASH_CID : 1501004E355530304D0204F7324B2111
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0xB5A9BA64C2CC0767961B8DD5CBB4A9B6
INT RAM : 0x00020000
EXT RAM : 0x00000000 [DRAM_NOT_INIT]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Erase Flash now ...
Keep Preloader alive
Flash erase done

Done!
Elapsed: 00:00:10
Reconnect Power/Cable!


Scatter Load Ok , BaseBand : MT6575 , Project : MTK6575 , Storage : eMMC
Files found : 12 , Set to Flash : 11
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Model : GT-I9082
Device CPU : MT6575
Device IntName : GT-I9082
Device Version : 4.2.2
Device Compile : 5/29/2015 9:40:43 AM
Device Project : ALPS.JB.MP.V1.16
Device ExtInfo : GT-I9082
Ready to Flash!

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 39 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6575
BB_CPU_NME : [MediaTek] MT6575|MT6577_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0xE201
Processing BROM stage
i2c Init : 00000000
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x84
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , M00U5
[eMMC] : FLASH_CID : 1501004E355530304D0204F7324B2111
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0xB5A9BA64C2CC0767961B8DD5CBB4A9B6
INT RAM : 0x00020000
EXT RAM : 0x00000000 [DRAM_NOT_INIT]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6575 , Project : MTK6575 , Storage : eMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

Switching to HSUSB
HSUSB Init Ok
DRAM not initialized , will try init now
DRAM init passed , 0x20000000

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : Old Dedvice , skip BatteryLevel check

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000000600000-0x0000000000060000
Erase : 0x0000000000D80000-0x0000000069E64000
Flash Pre-Erase Done, time used : 00:00:00

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ...
Use : preloader_hexing75_jb.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : FFFFFFFF
PartErr : Not initialized , will update PMT now ...
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : MBR
Image Flash Ok
Flash now : EBR1
Image Flash Ok
Flash now : UBOOT
Image Flash Ok
Flash now : BOOTIMG
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : SEC_RO
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : EBR2
Image Flash Ok
Flash now : ANDROID
Write Error , code 0x001! Something went wrong!

Operation Failed
Elapsed: 00:00:46
Reconnect Power/Cable!
  Reply With Quote
Old 11-08-2016, 12:20   #6 (permalink)
No Life Poster
 
Join Date: Jun 2007
Posts: 784
Member: 532257
Status: Offline
Sonork: 1624266
Thanks Meter: 64
with sptool errer pic here

Quote:
Originally Posted by kamrolhasan View Post
Use SP tool Select Scatter Use Format all+Download


sptool flash erer - Pic Tub Club - Free Image Hosting
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 15:16.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.17061 seconds with 8 queries

SEO by vBSEO