k800i flash problem - GSM-Forum

doonyi · 03-16-2009, 17:50

this is the flash log on it
v0.915034/UNI
CARD SERIAL: 00****
Loaded 51 flash descriptors
SIGNED MODE (USING SERVER)
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35975701989596 CERT:N/A
FLASH CID:53 COLOR:RED
PATCH:071120 1355 HANCXC9876543210_DB2020_MEM_PATCHER_R2A012 0
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
Flash ID check:897E
Flash props sent ok
writing "C:\Documents and Settings\OBOY INTER GSM\My Documents\setool flash files\K800\52\R8BF003_1250210_GENERIC_WI.ssw"
CURRENT FLASH FILE CID:52
SSW uses full hash, hash len is:9200
llbug: blk write fail. fatal
PROCEDURE WAS STOPPED BY USER
HDR block not accepted,error: BA
Elapsed: 47 secs.
SIGNED MODE (USING SERVER)
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35975701989596 CERT:N/A
FLASH CID:53 COLOR:RED
PATCH:071120 1355 HANCXC9876543210_DB2020_MEM_PATCHER_R2A012 0
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
Flash ID check:897E
Flash props sent ok
LDR:070904 1245 AN2CXC1250562_DB2020_CSLOADER_R3A013
loader startup: executed
GDFS startup failed (1D)
loader GDFS startup failed, that is fatal
Elapsed: 24 secs.
SIGNED MODE (USING SERVER)
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35975701989596 CERT:N/A
FLASH CID:53 COLOR:RED
PATCH:071120 1355 HANCXC9876543210_DB2020_MEM_PATCHER_R2A012 0
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
Flash ID check:897E
Flash props sent ok
writing "C:\Documents and Settings\Documents\setool flash files\K800\52\R8BF003_1250210_GENERIC_WI.ssw"
CURRENT FLASH FILE CID:52
SSW uses full hash, hash len is:9200
HDR block not accepted,error: 19
Elapsed: 14 secs.
SIGNED MODE (USING SERVER)
RECOVERY MODE STARTED
DB2020 EROM UPGRADE STARTED
BOOTROM MODE DETECTED
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35975701989596 CERT:N/A
FLASH CID:53 COLOR:RED
Flash ID check:897E
Flash props sent ok
FAILED TO LOAD EROM UPGRADE LOADER
Elapsed: 559 secs.
SIGNED MODE (USING SERVER)
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35975701989596 CERT:N/A
FLASH CID:53 COLOR:RED
PATCH:071120 1355 HANCXC9876543210_DB2020_MEM_PATCHER_R2A012 0
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
Flash ID check:897E
Flash props sent ok
writing "C:\Documents and Settings\OBOY INTER GSM\My Documents\setool flash files\K800\52\R8BF003_1250210_GENERIC_WI.ssw"
CURRENT FLASH FILE CID:52
SSW uses full hash, hash len is:9200
HDR block not accepted,error: 19
Elapsed: 24 secs.
please, what should i do?

rana_ · 03-16-2009, 18:08

that gdfs probleam write gdfs with tp......................

Mohsin-* · 03-16-2009, 18:30

Quote:

Originally Posted by doonyi

this is the flash log on it
v0.915034/UNI
CARD SERIAL: 00****
Loaded 51 flash descriptors
SIGNED MODE (USING SERVER)
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35975701989596 CERT:N/A
FLASH CID:53 COLOR:RED
PATCH:071120 1355 HANCXC9876543210_DB2020_MEM_PATCHER_R2A012 0
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
Flash ID check:897E
Flash props sent ok
writing "C:\Documents and Settings\OBOY INTER GSM\My Documents\setool flash files\K800\52\R8BF003_1250210_GENERIC_WI.ssw"
CURRENT FLASH FILE CID:52
SSW uses full hash, hash len is:9200
llbug: blk write fail. fatal
PROCEDURE WAS STOPPED BY USER
HDR block not accepted,error: BA
Elapsed: 47 secs.
SIGNED MODE (USING SERVER)
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35975701989596 CERT:N/A
FLASH CID:53 COLOR:RED
PATCH:071120 1355 HANCXC9876543210_DB2020_MEM_PATCHER_R2A012 0
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
Flash ID check:897E
Flash props sent ok
LDR:070904 1245 AN2CXC1250562_DB2020_CSLOADER_R3A013
loader startup: executed
GDFS startup failed (1D)
loader GDFS startup failed, that is fatal
Elapsed: 24 secs.
SIGNED MODE (USING SERVER)
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35975701989596 CERT:N/A
FLASH CID:53 COLOR:RED
PATCH:071120 1355 HANCXC9876543210_DB2020_MEM_PATCHER_R2A012 0
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
Flash ID check:897E
Flash props sent ok
writing "C:\Documents and Settings\Documents\setool flash files\K800\52\R8BF003_1250210_GENERIC_WI.ssw"
CURRENT FLASH FILE CID:52
SSW uses full hash, hash len is:9200
HDR block not accepted,error: 19
Elapsed: 14 secs.
SIGNED MODE (USING SERVER)
RECOVERY MODE STARTED
DB2020 EROM UPGRADE STARTED
BOOTROM MODE DETECTED
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35975701989596 CERT:N/A
FLASH CID:53 COLOR:RED
Flash ID check:897E
Flash props sent ok
FAILED TO LOAD EROM UPGRADE LOADER
Elapsed: 559 secs.
SIGNED MODE (USING SERVER)
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35975701989596 CERT:N/A
FLASH CID:53 COLOR:RED
PATCH:071120 1355 HANCXC9876543210_DB2020_MEM_PATCHER_R2A012 0
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
Flash ID check:897E
Flash props sent ok
writing "C:\Documents and Settings\OBOY INTER GSM\My Documents\setool flash files\K800\52\R8BF003_1250210_GENERIC_WI.ssw"
CURRENT FLASH FILE CID:52
SSW uses full hash, hash len is:9200
HDR block not accepted,error: 19
Elapsed: 24 secs.
please, what should i do?

check battry and cable

BR

hyber_99 · 03-16-2009, 19:00

Quote:

v0.915034/UNI
CARD SERIAL: 00****
Loaded 51 flash descriptors
SIGNED MODE (USING SERVER)
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35975701989596 CERT:N/A
FLASH CID:53 COLOR:RED

writing "C:\Documents and Settings\OBOY INTER GSM\My Documents\setool flash files\K800\52\R8BF003_1250210_GENERIC_WI.ssw"
CURRENT FLASH FILE CID:52
writing "C:\Documents and Settings\Documents\setool flash files\K800\52\R8BF003_1250210_GENERIC_WI.ssw"
CURRENT FLASH FILE CID:52
SSW uses full hash, hash len is:9200
HDR block not accepted,error: 19
Elapsed: 14 secs.

can you see the problem?

only flash it with firmware CID53,
that´all

regards

doonyi · 03-16-2009, 19:14

Quote:

Originally Posted by hyber_99

can you see the problem?

only flash it with firmware CID53,
that´all

regards

thanks for that but i think phone has gdf problem , i cant do it.

rana_ · 03-16-2009, 19:38

Quote:

Originally Posted by doonyi

thanks for that but i think phone has gdf problem , i cant do it.

K800 corrupted gdfs done again by SEtool w/ guide
1. go to emptyboard fill & repair

2. select any db2020 model

3. press "TP STAGE #1". read "instructions" and execute them.

or (3a. check the box between the TP STAGE 1 & 2 in order to automatically proceed to tp sage 2 if your TP #1 is ok)

4. press "TP STAGE #2". read "instructions" and execute them.

5.the phone is cid49 brown

6. staying on "emptyboard fill and repair" write correct gdfs_in_ssw format

=== now write db2020gdfs_in_ssw_format_CID49_BROWN.ssw"====

7. if flashing went fine, flash db2020 erom with needed CID

= since my otp cid is 51 so i used "DB2020EROM_CNV_RED52_BROWN_CID49_DB2020.ssw", ===

=== warning;=== example if your otp cid is CID51

=== do not write erom with lower cid
ex..k800_erom_cnv_RED49_BROWN_CID49_DB2020.ssw
because you cant flash the phone it gives you an error
when you perform fullflash

hyber_99 · 03-16-2009, 19:53

Quote:

Originally Posted by doonyi

thanks for that but i think phone has gdf problem , i cant do it.

before you do the tp, try with firmware 53

regards

GSMman187 · 03-16-2009, 20:00

Quote:

Originally Posted by hyber_99

can you see the problem?

only flash it with firmware CID53,
that´all

regards

1. you have bootrom mode (emergency mode 2+5)
2. Wrong flash file
3. Check battery

You must flash using C button not 2+5 !!!!!!!!
Use cid 53 flash files (unless u are cross flashing)
Make sure battery is full

doonyi · 03-17-2009, 09:20

fulflash completed , but gdf loader startup failed

tabarat1 · 03-17-2009, 09:43

bro just use cid 53 flash files.

GSMman187 · 03-17-2009, 16:04

Quote:

Originally Posted by GSMman187

1. you have bootrom mode (emergency mode 2+5)
2. Wrong flash file
3. Check battery

You must flash using C button not 2+5 !!!!!!!!
Use cid 53 flash files (unless u are cross flashing)
Make sure battery is full

Quote:

Originally Posted by doonyi

fulflash completed , but gdf loader startup failed

did you do this ?????

must press C button not 2+5 !!

also what setting do you have ?

'

doonyi · 03-17-2009, 18:26

sighn mode and complete after flash. C key cannot respond

fusion_fx · 10-05-2009, 19:54

i have k800i dead soft if C does not answer key? What's to do?

thx!

ameerali19 · 06-05-2010, 17:33

Quote:

Originally Posted by doonyi

thanks for that but i think phone has gdf problem , i cant do it.

hi brother
i have a set with the same problem
pls help me

RUNNING v 1.07/UNI
CARD SERIAL 00132299
USBFLASH DRIVER VERSION 02.02.00.05
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
CFG:111110000000
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35612802379227
ACTIVE CID:49 COLOR:BROWN
LDR:060721 1021 DB2020_SERVICE_LOADER
FLASH ID: 897E
writing "E:\files\sony ericsson\se tool file\k800\cid 49\r1cb001_CXC1250210_GENERIC_WI.ssw.cry"
CURRENT FLASH FILE CID:49
SSW uses full hash, hash len is: 9100
HDR block not accepted,error: 19
Elapsed: 8 secs.

ameerali19 · 06-05-2010, 17:39

Quote:

Originally Posted by rana_

K800 corrupted gdfs done again by SEtool w/ guide
1. go to emptyboard fill & repair

2. select any db2020 model

3. press "TP STAGE #1". read "instructions" and execute them.

or (3a. check the box between the TP STAGE 1 & 2 in order to automatically proceed to tp sage 2 if your TP #1 is ok)

4. press "TP STAGE #2". read "instructions" and execute them.

5.the phone is cid49 brown

6. staying on "emptyboard fill and repair" write correct gdfs_in_ssw format

=== now write db2020gdfs_in_ssw_format_CID49_BROWN.ssw"====

7. if flashing went fine, flash db2020 erom with needed CID

= since my otp cid is 51 so i used "DB2020EROM_CNV_RED52_BROWN_CID49_DB2020.ssw", ===

=== warning;=== example if your otp cid is CID51

=== do not write erom with lower cid
ex..k800_erom_cnv_RED49_BROWN_CID49_DB2020.ssw
because you cant flash the phone it gives you an error
when you perform fullflash

brother
can uou tell me
how can i do this operation in new se tool setup(1.7)

03-16-2009, 17:50	#1 (permalink)
doonyi Freak Poster Join Date: Jul 2008 Location: WORKS WITH THE BEST Posts: 467 Member: 821156 Status: Offline Thanks Meter: 42	k800i flash problem this is the flash log on it v0.915034/UNI CARD SERIAL: 00**** Loaded 51 flash descriptors SIGNED MODE (USING SERVER) ChipID:9900,EMP protocol:0301 BOOTROM MODE DETECTED Speed:921600 OTP: LOCKED:1 CID:51 PAF:1 IMEI:35975701989596 CERT:N/A FLASH CID:53 COLOR:RED PATCH:071120 1355 HANCXC9876543210_DB2020_MEM_PATCHER_R2A012 0 LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015 Flash ID check:897E Flash props sent ok writing "C:\Documents and Settings\OBOY INTER GSM\My Documents\setool flash files\K800\52\R8BF003_1250210_GENERIC_WI.ssw" CURRENT FLASH FILE CID:52 SSW uses full hash, hash len is:9200 llbug: blk write fail. fatal PROCEDURE WAS STOPPED BY USER HDR block not accepted,error: BA Elapsed: 47 secs. SIGNED MODE (USING SERVER) ChipID:9900,EMP protocol:0301 BOOTROM MODE DETECTED Speed:921600 OTP: LOCKED:1 CID:51 PAF:1 IMEI:35975701989596 CERT:N/A FLASH CID:53 COLOR:RED PATCH:071120 1355 HANCXC9876543210_DB2020_MEM_PATCHER_R2A012 0 LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015 Flash ID check:897E Flash props sent ok LDR:070904 1245 AN2CXC1250562_DB2020_CSLOADER_R3A013 loader startup: executed GDFS startup failed (1D) loader GDFS startup failed, that is fatal Elapsed: 24 secs. SIGNED MODE (USING SERVER) ChipID:9900,EMP protocol:0301 BOOTROM MODE DETECTED Speed:921600 OTP: LOCKED:1 CID:51 PAF:1 IMEI:35975701989596 CERT:N/A FLASH CID:53 COLOR:RED PATCH:071120 1355 HANCXC9876543210_DB2020_MEM_PATCHER_R2A012 0 LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015 Flash ID check:897E Flash props sent ok writing "C:\Documents and Settings\Documents\setool flash files\K800\52\R8BF003_1250210_GENERIC_WI.ssw" CURRENT FLASH FILE CID:52 SSW uses full hash, hash len is:9200 HDR block not accepted,error: 19 Elapsed: 14 secs. SIGNED MODE (USING SERVER) RECOVERY MODE STARTED DB2020 EROM UPGRADE STARTED BOOTROM MODE DETECTED OTP: LOCKED:1 CID:51 PAF:1 IMEI:35975701989596 CERT:N/A FLASH CID:53 COLOR:RED Flash ID check:897E Flash props sent ok FAILED TO LOAD EROM UPGRADE LOADER Elapsed: 559 secs. SIGNED MODE (USING SERVER) ChipID:9900,EMP protocol:0301 BOOTROM MODE DETECTED Speed:921600 OTP: LOCKED:1 CID:51 PAF:1 IMEI:35975701989596 CERT:N/A FLASH CID:53 COLOR:RED PATCH:071120 1355 HANCXC9876543210_DB2020_MEM_PATCHER_R2A012 0 LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015 Flash ID check:897E Flash props sent ok writing "C:\Documents and Settings\OBOY INTER GSM\My Documents\setool flash files\K800\52\R8BF003_1250210_GENERIC_WI.ssw" CURRENT FLASH FILE CID:52 SSW uses full hash, hash len is:9200 HDR block not accepted,error: 19 Elapsed: 24 secs. please, what should i do?

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
k800i flash problem	mzi3807	Universalbox	0	04-21-2008 23:56
K800i flash... problem... please help	abyssx	Cruiser Suite	9	08-30-2007 10:22
k800i flashing problem	anildeepak	Cruiser Suite	0	04-10-2007 07:25
K800i FLASHING PROBLEM	atlasgsm	MT-BOX	9	02-13-2007 05:16
K800i flashing problem	Unicom	Cruiser Suite	1	01-22-2007 10:51

03-16-2009, 18:08	#2 (permalink)
rana_ Freak Poster Join Date: Sep 2007 Location: BanglaDesh Posts: 451 Member: 597570 Status: Offline Sonork: 100.1590733 Thanks Meter: 159	that gdfs probleam write gdfs with tp......................

03-17-2009, 09:20	#9 (permalink)
doonyi Freak Poster Join Date: Jul 2008 Location: WORKS WITH THE BEST Posts: 467 Member: 821156 Status: Offline Thanks Meter: 42	fulflash completed , but gdf loader startup failed

03-17-2009, 09:43	#10 (permalink)
tabarat1 Registered User Join Date: Jan 2008 Location: pakistan Age: 39 Posts: 234 Member: 677837 Status: Offline Thanks Meter: 65	bro just use cid 53 flash files.

03-17-2009, 18:26	#12 (permalink)
doonyi Freak Poster Join Date: Jul 2008 Location: WORKS WITH THE BEST Posts: 467 Member: 821156 Status: Offline Thanks Meter: 42	sighn mode and complete after flash. C key cannot respond

10-05-2009, 19:54	#13 (permalink)
fusion_fx Major Poster Join Date: Jun 2005 Location: bucarest-romania Age: 46 Posts: 48 Member: 151975 Status: Offline Thanks Meter: 2	i have k800i dead soft if C does not answer key? What's to do? thx!