Guidance for Sony Ericsson K800i CID-53 with SETool2 via Patsch UNLOCK!

[Service4Gsm.de]

Hello of people

It can be which I writes errors has, because my Englich is not like that Perfeckt!

Thus, whom it a CID-53 Sony Ericsson K800i have and it want the unlocken, dan should it zumindestens a SETool V0.914029 have and which however very important be, the remainder file all Komplet be otherwise it problem get with unlocken!

The expiration:

1.Sony Ericcson K800i also fully loaded accumulator!

2.Original USB cable DCU-60

3.starting from SETool V0.914029

4.a Testsim or the Simkarte with that mobile phone completely starting leaves themselves (thus the Simkarte of the Prepaid of package!

5.That you still another simkarte need to test it after unlocken to have!
Thus dan it can go loosely

1.SETool start and afterwards mobile phone the model select

2.Under interfaces: USB select

3.Right finds to her the Setting above and please clicks

4.The box 1 and 3 click (1-Signed mode click (user server for Bypass/CSCA and the 3-Enable alternative Security bypass)

5.Afterwards left above Sony Ericcson press and afterwards anschlißent UNLOCK press

6.The key C pressed and anschlißent to the USB cables at mobile phone anschlißent and afterwards wait you keep a small moment and afterwards it requested the Testsim or the simkarte into mobile phone to insert! Dan would have you the USB cables to separate and the Testsim in the mobile phone insert and to mobile phone into switched on was entitled again with the USB cable to connect and afterwards after some seconds later is free that mobile phone for all nets!

I hope to have helped little! If their error finds says please answer omit (orthography and sowas please)

Greeting Service4Gsm.de

[nzeiga]

use same procedure like Cid52 and use laster module SETool V0.914037
also check this http:///vbb/showthread.php?t=536201

[Nurettin Duman]

Originally Posted by Service4Gsm.de

Hello of people

It can be which I writes errors has, because my Englich is not like that Perfeckt!

Thus, whom it a CID-53 Sony Ericsson K800i have and it want the unlocken, dan should it zumindestens a SETool V0.914029 have and which however very important be, the remainder file all Komplet be otherwise it problem get with unlocken!

The expiration:

1.Sony Ericcson K800i also fully loaded accumulator!

2.Original USB cable DCU-60

3.starting from SETool V0.914029

4.a Testsim or the Simkarte with that mobile phone completely starting leaves themselves (thus the Simkarte of the Prepaid of package!

5.That you still another simkarte need to test it after unlocken to have!
Thus dan it can go loosely

1.SETool start and afterwards mobile phone the model select

2.Under interfaces: USB select

3.Right finds to her the Setting above and please clicks

4.The box 1 and 3 click (1-Signed mode click (user server for Bypass/CSCA and the 3-Enable alternative Security bypass)

5.Afterwards left above Sony Ericcson press and afterwards anschliكent UNLOCK press

6.The key C pressed and anschliكent to the USB cables at mobile phone anschliكent and afterwards wait you keep a small moment and afterwards it requested the Testsim or the simkarte into mobile phone to insert! Dan would have you the USB cables to separate and the Testsim in the mobile phone insert and to mobile phone into switched on was entitled again with the USB cable to connect and afterwards after some seconds later is free that mobile phone for all nets!

I hope to have helped little! If their error finds says please answer omit (orthography and sowas please)

Greeting Service4Gsm.de

old exe SETool V0.914029
v0.914037 new...............

[Service4Gsm.de]

Hello
That is correct the SETool V0.194029 is old however I has also written starting from SETool the V0.194029 possible lasts!

[Mohsin-*]

http:///vbb/showthread.php?t=556153