Setool3 works but not identifying any phone??? - GSM-Forum

Linqcomputers · 07-25-2009, 23:26

OK this is somewhat a beginner's issue, but will highly appreciate your advise as it might be something very simply i am missing out.

The SE tool 3 works fine but it has stopped identiying ALL sony ericsson phones. Tried w595, w880i, k800, and several others.

USB cable is connected to the SETOOL and when 2+5 is pressed after clicking IDENTITFY ( or when c is pressed for SE phones) , setool doesnt detect the phone

1) Tried takeing the battery out several times ( setool was workkng fine a week before this_
2) tried changing cables, phones NO luck
3) tried changing computers, no luck same problem eveyrwhere

the usb cable itself are ok, if 2+5 is not pressed ALL phones are detected and can be accessed via PC Suite .

this SETools box was working fine a week back , and i just cannot figure out what the problem is.

Will highly appreciate if you could advise what could be wrong!

Kind Regards

Linq

gsmbac · 07-26-2009, 02:35

if setool software works fine,
this is only drivers issue.
reinstall usb flash drivers (gg-setup.exe)
br.

xerraco · 07-27-2009, 03:24

Maybe USB Flash device driver is not installed Mate, Just install it.

07-25-2009, 23:26	#1 (permalink)
Linqcomputers Major Poster Join Date: Jul 2009 Location: London Posts: 46 Member: 1076562 Status: Offline Thanks Meter: 1	Setool3 works but not identifying any phone??? OK this is somewhat a beginner's issue, but will highly appreciate your advise as it might be something very simply i am missing out. The SE tool 3 works fine but it has stopped identiying ALL sony ericsson phones. Tried w595, w880i, k800, and several others. USB cable is connected to the SETOOL and when 2+5 is pressed after clicking IDENTITFY ( or when c is pressed for SE phones) , setool doesnt detect the phone 1) Tried takeing the battery out several times ( setool was workkng fine a week before this_ 2) tried changing cables, phones NO luck 3) tried changing computers, no luck same problem eveyrwhere the usb cable itself are ok, if 2+5 is not pressed ALL phones are detected and can be accessed via PC Suite . this SETools box was working fine a week back , and i just cannot figure out what the problem is. Will highly appreciate if you could advise what could be wrong! Kind Regards Linq

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
b100m speaker work ok but not play any ringtone	/\/\A/\/\|	Samsung Hardware Repair	1	09-17-2011 11:21
6630 works but not works strange problem HELPPP!	maniek27	Nokia Base Band 5 ( BB-5 )	7	10-15-2008 14:27
nokia 6020 all key work but *not work	qazzafihd	Nokia Hardware & Hardware Repair	1	04-26-2008 20:56

07-26-2009, 02:35	#2 (permalink)
gsmbac No Life Poster Join Date: Nov 2003 Location: srilanka Age: 51 Posts: 1,315 Member: 44229 Status: Offline Sonork: 1592530 Thanks Meter: 366	if setool software works fine, this is only drivers issue. reinstall usb flash drivers (gg-setup.exe) br.

07-27-2009, 03:24	#3 (permalink)
xerraco No Life Poster Join Date: Nov 2008 Location: RVIII Posts: 11,704 Member: 890926 Status: Offline Thanks Meter: 2,055	Maybe USB Flash device driver is not installed Mate, Just install it.