GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   SETool2 (https://forum.gsmhosting.com/vbb/f473/)
-   -   u1i satio unlock problem (https://forum.gsmhosting.com/vbb/f473/u1i-satio-unlock-problem-993603/)

Andrew-Poznan 05-06-2010 12:02
u1i satio unlock problem
 
RUNNING v 1.01/UNI
CARD SERIAL 00078545
USBFLASH DRIVER VERSION 02.02.00.05
SIGNED MODE (USING SERVER)
CFG:110000000000
SERVER CREDITS LEFT/USED: 8/22
CARD COUNTERS: FLASH 122, UNLOCK 80
Elapsed: 2 secs.
SIGNED MODE (USING SERVER)
CFG:110000000000
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD "GREEN" BUTTON...

EROM "R6A032" AID: 0001
SOFTWARE AID: 0001
SIMLOCK STATE: "NOT_TAMPERED"
LOADER AID: 0002
llbug: blk write fail. fatal
can't send S1 command [00000006/00000007]
LOADER NOT STARTED
FAILED TO SETUP PHONE
Elapsed: 5 secs.


What's wrong. Im using USB cable and setings I choise 1 & 2 and my username and pass.

Any Idea.

Setool ver 1.01.

adelgsm 05-06-2010 12:06
1. go to pda tab
2. select SATIO
3. go to settings, checked signed mode and perform full unlock
4. enter your username,password and server
5. go back to pda tab
6. press unlock

Andrew-Poznan 05-06-2010 12:11
dont work
 
dont work
this same comunicate
EROM "R6A032" AID: 0001
SOFTWARE AID: 0001
SIMLOCK STATE: "NOT_TAMPERED"
LOADER AID: 0002
llbug: blk write fail. fatal
can't send S1 command [00000006/00000007]
LOADER NOT STARTED
FAILED TO SETUP PHONE
Elapsed: 12 secs.

any idea??

Andrew-Poznan 05-06-2010 12:14
when I click IDENTIFITY - this same problem

sandeephanda78 05-06-2010 12:23
just unlock without any problem

5/6/2010 3:11:36 PM SIGNED MODE (USING SERVER)
5/6/2010 3:11:36 PM CFG:100001000000
5/6/2010 3:11:36 PM PLEASE ATTACH TURNED OFF PHONE NOW
5/6/2010 3:11:36 PM PRESS AND HOLD "GREEN" BUTTON...
5/6/2010 3:11:47 PM
5/6/2010 3:11:47 PM EROM "R6A032" AID: 0001
5/6/2010 3:11:47 PM SOFTWARE AID: 0001
5/6/2010 3:11:47 PM SIMLOCK STATE: "NOT_TAMPERED"
5/6/2010 3:11:48 PM LOADER AID: 0002
5/6/2010 3:11:57 PM FLASH ID: "00EC/0040"
5/6/2010 3:11:57 PM LOADER VERSION: "R4A012"
5/6/2010 3:11:57 PM
5/6/2010 3:11:57 PM PHONE IMEI:3&&**********
5/6/2010 3:11:57 PM MINOR ERROR "MISC_ERROR (No_such_unit_(0x0004))" IN "MISC_CLASS"
5/6/2010 3:11:57 PM Checking for signature...
5/6/2010 3:11:58 PM Waiting for calculation process...
5/6/2010 3:11:59 PM RESPONSE: "SUCCESS" [1048]
5/6/2010 3:12:01 PM GOT SEED:3271616F80CA7135400A6B1C
5/6/2010 3:12:01 PM OMAP P96 AUTH PASSED
5/6/2010 3:12:03 PM GOT SEED:F4F9D7E26F80CA7135400A6B
5/6/2010 3:12:07 PM CCPU P96 AUTH PASSED
5/6/2010 3:12:07 PM Unlock DONE
5/6/2010 3:12:07 PM Elapsed: 31 secs.

Andrew-Poznan 05-06-2010 12:28
i know...
 
but I have this Error.

I read all post about unlock metod U1i but I can unlock it....
Setool give me error

llbug: blk write fail. fatal
can't send S1 command [00000006/00000007]
LOADER NOT STARTED
FAILED TO SETUP PHONE

What can i do? Phone works perfectly...

Andrew-Poznan 05-06-2010 12:56
It's work
 
IT'S works

I unplug usb cable and put to diferent USB port, and work!

Thanks all

adelgsm 05-06-2010 13:00
HOW TO WORK WITH SEMC PDA PHONES

first, basics.

SEMC created few types of PDA:

db200x+nexperia
m600,w950,w960,p1,p990

such phones have two security type - NEW and OLD.
Identify button will show security type - it will write "NEW SECURITY detected" with NEW security phones.

if is better to install PDA phone drivers and PDA flash drivers before any operation.

phone drivers:

Quote:
for that you need to download phones.rar from support or from SEMC
turn on phone. in "connections manager->usb" select "normal mode".
now, attach cable.
windows will ask you for drivers, point it to corresponding folder within extracted phones.rar.
you must have "semc xxx usb modem" and "semc xxx application port" if drivers correctly installed.
now, turn phone off and detach it.
flash drivers:

Quote:
power on smartphone in fw update mode.

- for p990/m600 press and hold "@" on TURNED OFF phone, then attach dcu60.
- for w950,w960,p1 press and hold "C" on TURNED OFF phone, then attach dcu60.

windows will ask you for a drivers. drivers in %setool2 dist%\drivers\Smartphone_Drivers
S1 OPEN
satio,vivaz

Mohsin_josh 05-06-2010 13:24
Quote:
Originally Posted by Andrew-Poznan (Post 5805112)
IT'S works

I unplug usb cable and put to diferent USB port, and work!

Thanks all
check phone bettry full charge and then unlock it's sure valid user name pass and activation

roney_nexus 05-06-2010 14:29
Quote:
Originally Posted by Andrew-Poznan (Post 5804855)
RUNNING v 1.01/UNI
CARD SERIAL 00078545
USBFLASH DRIVER VERSION 02.02.00.05
SIGNED MODE (USING SERVER)
CFG:110000000000
SERVER CREDITS LEFT/USED: 8/22
CARD COUNTERS: FLASH 122, UNLOCK 80
Elapsed: 2 secs.
SIGNED MODE (USING SERVER)
CFG:110000000000
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD "GREEN" BUTTON...

EROM "R6A032" AID: 0001
SOFTWARE AID: 0001
SIMLOCK STATE: "NOT_TAMPERED"
LOADER AID: 0002
llbug: blk write fail. fatal
can't send S1 command [00000006/00000007]
LOADER NOT STARTED
FAILED TO SETUP PHONE
Elapsed: 5 secs.


What's wrong. Im using USB cable and setings I choise 1 & 2 and my username and pass.

Any Idea.

Setool ver 1.01.
set correct settings and repeat procedure.
you can see correct settings in FAQ or in multiple posts in forum.
hint: signed mode + do full unlock instead usercode reset.


All times are GMT +1. The time now is 15:35.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.17101 seconds with 6 queries

SEO by vBSEO