Xperia x10i resurection pinout cable - GSM-Forum

newchief · 12-01-2014, 18:25

Hello. I need pinout for setool ressurection cable for xperia x10i.

br

rasgula · 12-01-2014, 18:26

Buy resurrect cable. it's easy to do job.search on Google and you will find it.
Regards

newchief · 12-01-2014, 18:30

I have no time to buy. I must make it.

:Aishur: · 12-01-2014, 22:39

http://forum.gsmhosting.com/vbb/f473...etool-1370996/

\Setool\docs\s1_qualcomm_uart_cables\x10_board.png

newchief · 12-02-2014, 09:11

Quote:

Originally Posted by :Aishur:

http://forum.gsmhosting.com/vbb/f473...etool-1370996/

\Setool\docs\s1_qualcomm_uart_cables\x10_board.png

Original cable 5 pin, with this topic i saw rx tx and gnd. What with others 2 pins?

:Aishur: · 12-02-2014, 12:17

Check the image x10_board.png
Procedure
HOW TO WORK WITH SEMC PDA PHONES post#10

newchief · 12-02-2014, 12:18

I need cable pinout not board. Rj45->Phone. RX TX GND and what two other pins?

moshman · 12-02-2014, 12:27

I thought resurrection cable was USB only

:Aishur: · 12-02-2014, 16:38

Quote:

Originally Posted by newchief

I need cable pinout not board. Rj45->Phone. RX TX GND and what two other pins?

read carefully my above post
the description for pin 2 and 3 is on the picture x10_board.png.
Anyway forget the other pins.

You have only to check
http://forum.gsmhosting.com/vbb/f473...etool-1370996/

newchief · 12-03-2014, 15:43

I bought original gpg cable and :

DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
ATTACH USB CABLE TO PHONE,THEN PRESS "READY"

PROCESSING ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"

qcReceivePacket: can't get packet start.
IF TESTPOINT DONE OK,THIS IS NOT SUPPORTED MCU REVISION
FAILED TO SETUP PHONE

koperta4512 · 12-09-2014, 19:11

Check pinouts and need connect USB cable

rasgula · 12-11-2014, 07:47

Quote:

Originally Posted by newchief

I bought original gpg cable and :

DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
ATTACH USB CABLE TO PHONE,THEN PRESS "READY"

PROCESSING ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"

qcReceivePacket: can't get packet start.
IF TESTPOINT DONE OK,THIS IS NOT SUPPORTED MCU REVISION
FAILED TO SETUP PHONE

If you have old ipmart silver setool box just need to modify the cable and everything will be OK.
Regards

12-01-2014, 18:25	#1 (permalink)
newchief No Life Poster Join Date: Nov 2006 Location: poland krakow Posts: 512 Member: 389207 Status: Offline Thanks Meter: 61	Xperia x10i resurection pinout cable Hello. I need pinout for setool ressurection cable for xperia x10i. br

12-01-2014, 18:26	#2 (permalink)
rasgula No Life Poster Join Date: Feb 2005 Location: Canada Posts: 1,278 Member: 119464 Status: Offline Thanks Meter: 288	Buy resurrect cable. it's easy to do job.search on Google and you will find it. Regards

12-01-2014, 18:30	#3 (permalink)
newchief No Life Poster Join Date: Nov 2006 Location: poland krakow Posts: 512 Member: 389207 Status: Offline Thanks Meter: 61	I have no time to buy. I must make it.

12-01-2014, 22:39	#4 (permalink)
:Aishur: No Life Poster Join Date: Jun 2010 Age: 14 Posts: 2,864 Member: 1315677 Status: Offline Thanks Meter: 1,439	http://forum.gsmhosting.com/vbb/f473...etool-1370996/ \Setool\docs\s1_qualcomm_uart_cables\x10_board.png

12-02-2014, 12:17	#6 (permalink)
:Aishur: No Life Poster Join Date: Jun 2010 Age: 14 Posts: 2,864 Member: 1315677 Status: Offline Thanks Meter: 1,439	Check the image x10_board.png Procedure HOW TO WORK WITH SEMC PDA PHONES post#10

12-02-2014, 12:18	#7 (permalink)
newchief No Life Poster Join Date: Nov 2006 Location: poland krakow Posts: 512 Member: 389207 Status: Offline Thanks Meter: 61	I need cable pinout not board. Rj45->Phone. RX TX GND and what two other pins?

12-02-2014, 12:27	#8 (permalink)
moshman No Life Poster Join Date: Oct 2005 Location: England Posts: 1,266 Member: 193192 Status: Offline Thanks Meter: 327	I thought resurrection cable was USB only

12-03-2014, 15:43	#10 (permalink)
newchief No Life Poster Join Date: Nov 2006 Location: poland krakow Posts: 512 Member: 389207 Status: Offline Thanks Meter: 61	I bought original gpg cable and : DETACH USB CABLE FROM PHONE REMOVE BATTERY FROM PHONE ATTACH TESTPOINT ATTACH USB CABLE TO PHONE,THEN PRESS "READY" PROCESSING ... REMOVE TESTPOINT NOW, THEN PRESS "READY" qcReceivePacket: can't get packet start. IF TESTPOINT DONE OK,THIS IS NOT SUPPORTED MCU REVISION FAILED TO SETUP PHONE

12-09-2014, 19:11	#11 (permalink)
koperta4512 No Life Poster Join Date: Dec 2011 Location: Poland Posts: 1,166 Member: 1704846 Status: Offline Sonork: 1617108 Thanks Meter: 117	Check pinouts and need connect USB cable