w910 cant on - GSM-Forum

nmh · 01-08-2010, 06:47

identify log
v0.915057/UNI
CARD SERIAL: 00031408
Loaded 51 flash descriptors
CFG:000000000000
ChipID:C802,EMP protocol:0401
BOOTROM MODE DETECTED
OTP DBG: [1,52,1,35155503131294]
unexpected PDU:[06] [0101]
OTP LOCKED:1 CID:52 PAF:1 IMEI:35155503131294
[loader_on_loader] hdr err:1022
loader_on_loader:bad result [01/11]
Elapsed: 8 secs.

flash log
v0.915057/UNI
CARD SERIAL: 00031408
Loaded 51 flash descriptors
CFG:000000000000
ChipID:C802,EMP protocol:0401
BOOTROM MODE DETECTED
OTP DBG: [1,52,1,35155503131294]
unexpected PDU:[06] [0101]
OTP LOCKED:1 CID:52 PAF:1 IMEI:35155503131294
phone CID not supported
Elapsed: 14 secs.

any solutiong

Amir-SkillZ · 01-08-2010, 07:13

load flash files..
Check Signed Mode and Customize Phone after Flash.
Press Flash and Connect in 2+5 BootRom Mode

nmh · 01-08-2010, 08:13

Quote:

Originally Posted by Amir-SkillZ

load flash files..
Check Signed Mode and Customize Phone after Flash.
Press Flash and Connect in 2+5 BootRom Mode

checked oledi but still same
phone CID not supported
confused

JAVA Good · 01-09-2010, 17:55

I think for flashinf phone no probleme about CID, you need see this is suported or no only for unlocking,

if I'am wrong correct me,

Best Regards,
JAVA Good.

algerienbox · 01-09-2010, 17:58

for identify press "c" to boot phone
for flashing press "c" to boot phone
for unlock press "2+5" to boot phone

nmh · 01-11-2010, 10:49

thx JAVA GOOD n algerienbox post but tat aren't wat i need
the phone is dead! cant identify finish!
i flash the phone with correct setting(signed mode,customize phone n unlock phone)
but show me phone CID not supported when flashing
any expert can help?

JAVA Good · 01-11-2010, 11:44

for flashing I think you need check :
- Signed mode
- alternative bybass
- customize phone after flash,

so the flashing with usb cable is *** because is verry quick, but if you have a probleme test with COM port cable like cable of box on RJ45 it's more sure and can delette somme error.

if I'zm wrong correct me,

Best Regards,
JAVA Good.

algerienbox · 01-11-2010, 17:19

*1-CHANGE SETOOL VERSION
*2-IN SEEting chec only customize phone after flash
*3- add your flash
*4- change ECC mode to none and flash your phone
*5- boot phone with "c"
*6- poste flashing log

01-08-2010, 06:47	#1 (permalink)
nmh Junior Member Join Date: Jul 2009 Posts: 5 Member: 1066539 Status: Offline Thanks Meter: 0	w910 cant on identify log v0.915057/UNI CARD SERIAL: 00031408 Loaded 51 flash descriptors CFG:000000000000 ChipID:C802,EMP protocol:0401 BOOTROM MODE DETECTED OTP DBG: [1,52,1,35155503131294] unexpected PDU:[06] [0101] OTP LOCKED:1 CID:52 PAF:1 IMEI:35155503131294 [loader_on_loader] hdr err:1022 loader_on_loader:bad result [01/11] Elapsed: 8 secs. flash log v0.915057/UNI CARD SERIAL: 00031408 Loaded 51 flash descriptors CFG:000000000000 ChipID:C802,EMP protocol:0401 BOOTROM MODE DETECTED OTP DBG: [1,52,1,35155503131294] unexpected PDU:[06] [0101] OTP LOCKED:1 CID:52 PAF:1 IMEI:35155503131294 phone CID not supported Elapsed: 14 secs. any solutiong

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
w910 can't on	eiji 1198	Sony Ericsson Hardware Repair	2	04-29-2009 14:21
w910 cant flash	waqas_ali601200	SETool2	0	02-04-2009 18:36
2nd w910 cant unlock with unlimated unlocker but ok on seking	tong83	Cruiser Suite	6	10-25-2008 19:42
w910 cant unlock	MAHMOOD	Seking Server	1	04-30-2008 16:49
w910 cant find fs files	alexlow05	Cruiser Suite	3	01-30-2008 10:59

01-08-2010, 07:13	#2 (permalink)
Amir-SkillZ No Life Poster Join Date: Nov 2004 Location: Capetown Posts: 6,709 Member: 91045 Status: Offline Thanks Meter: 8,696	load flash files.. Check Signed Mode and Customize Phone after Flash. Press Flash and Connect in 2+5 BootRom Mode

01-09-2010, 17:55	#4 (permalink)
JAVA Good No Life Poster Join Date: May 2004 Age: 54 Posts: 2,440 Member: 66136 Status: Offline Thanks Meter: 200	I think for flashinf phone no probleme about CID, you need see this is suported or no only for unlocking, if I'am wrong correct me, Best Regards, JAVA Good.

01-09-2010, 17:58	#5 (permalink)
algerienbox No Life Poster Join Date: Sep 2007 Location: algeria Posts: 2,360 Member: 591880 Status: Offline Thanks Meter: 561	for identify press "c" to boot phone for flashing press "c" to boot phone for unlock press "2+5" to boot phone

01-11-2010, 10:49	#6 (permalink)
nmh Junior Member Join Date: Jul 2009 Posts: 5 Member: 1066539 Status: Offline Thanks Meter: 0	thx JAVA GOOD n algerienbox post but tat aren't wat i need the phone is dead! cant identify finish! i flash the phone with correct setting(signed mode,customize phone n unlock phone) but show me phone CID not supported when flashing any expert can help?

01-11-2010, 11:44	#7 (permalink)
JAVA Good No Life Poster Join Date: May 2004 Age: 54 Posts: 2,440 Member: 66136 Status: Offline Thanks Meter: 200	for flashing I think you need check : - Signed mode - alternative bybass - customize phone after flash, so the flashing with usb cable is *** because is verry quick, but if you have a probleme test with COM port cable like cable of box on RJ45 it's more sure and can delette somme error. if I'zm wrong correct me, Best Regards, JAVA Good.

01-11-2010, 17:19	#8 (permalink)
algerienbox No Life Poster Join Date: Sep 2007 Location: algeria Posts: 2,360 Member: 591880 Status: Offline Thanks Meter: 561	1-CHANGE SETOOL VERSION 2-IN SEEting chec only customize phone after flash 3- add your flash 4- change ECC mode to none and flash your phone 5- boot phone with "c" 6- poste flashing log