z530 dead any help - GSM-Forum

alick_2008 · 02-09-2010, 22:30

v0.915057/UNI
CARD SERIAL: 00010051
Loaded 51 flash descriptors
CFG:000100000000
PROCEDURE WAS STOPPED BY USER
FAILED TO SETUP PHONE
Elapsed: 7 secs.
CFG:000100000000
ChipID:8040,EMP protocol:0301

PHONE STATE: "DEVELOPER"
FLASH CID: 0049
Speed:921600
OTP: LOCKED:1 CID:49 PAF:1 IMEI:35285001706140 CERT:BROWN
LDR

B2010_RESPIN_PRODLOADER_SETOOL2
FLASH ID:897E
writing "D:\Liberacion\Setool\Flash File\Z530\r6ba030_CXC1250454_GENERIC_MU.ssw.cry"
CURRENT FLASH FILE CID:49
Converting firmware...
SSW uses dynamic hash, dynamic hash len is: 328
Will flash 328 blocks...
writing "D:\Liberacion\Setool\Flash File\Z530\r6ba032_eu1_fs.ssw.cry"
CURRENT FLASH FILE CID:49
Converting firmware...
SSW uses dynamic hash, dynamic hash len is: 121
Will flash 121 blocks...
can't get packet start.
can't get packet start.
Loader not responding
Elapsed: 524 secs.

xerraco · 02-11-2010, 09:33

Flash EROM to convert to RED

Code:

 PHONE STATE: "DEVELOPER"

Then Full Flash.

kzafquiel · 08-05-2010, 21:09

por lo regular es es modulo del teclado

:Aishur: · 08-05-2010, 21:33

Quote:

Originally Posted by kzafquiel

por lo regular es es modulo del teclado

من فضلك ، واستخدام اللغة الإنكليزية
ha ha ha
مع أطيب التحيات

02-09-2010, 22:30	#1 (permalink)
alick_2008 Freak Poster Join Date: Sep 2007 Location: Spain Posts: 270 Member: 595735 Status: Offline Thanks Meter: 20	z530 dead any help v0.915057/UNI CARD SERIAL: 00010051 Loaded 51 flash descriptors CFG:000100000000 PROCEDURE WAS STOPPED BY USER FAILED TO SETUP PHONE Elapsed: 7 secs. CFG:000100000000 ChipID:8040,EMP protocol:0301 PHONE STATE: "DEVELOPER" FLASH CID: 0049 Speed:921600 OTP: LOCKED:1 CID:49 PAF:1 IMEI:35285001706140 CERT:BROWN LDRB2010_RESPIN_PRODLOADER_SETOOL2 FLASH ID:897E writing "D:\Liberacion\Setool\Flash File\Z530\r6ba030_CXC1250454_GENERIC_MU.ssw.cry" CURRENT FLASH FILE CID:49 Converting firmware... SSW uses dynamic hash, dynamic hash len is: 328 Will flash 328 blocks... writing "D:\Liberacion\Setool\Flash File\Z530\r6ba032_eu1_fs.ssw.cry" CURRENT FLASH FILE CID:49 Converting firmware... SSW uses dynamic hash, dynamic hash len is: 121 Will flash 121 blocks... can't get packet start. can't get packet start. Loader not responding Elapsed: 524 secs.

02-11-2010, 09:33	#2 (permalink)
xerraco No Life Poster Join Date: Nov 2008 Location: RVIII Posts: 11,696 Member: 890926 Status: Offline Thanks Meter: 2,053	Flash EROM to convert to RED Code: PHONE STATE: "DEVELOPER" Then Full Flash.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
j200i DEAD ANY HELP	akhil_bbsr	Sony Ericsson Hardware Repair	0	10-12-2006 07:39
z530 dead please help ub team	arunamobile	Universalbox	2	06-30-2006 16:27
M35 Dead, Any help pls !!	Seedy	x1x to x45/x50	6	12-28-2002 04:37
New GD-30 (SW - week19) DEAD ! Any Help ?	Brka	Panasonic	0	07-14-2000 20:11
New GD-30 (SW - week19) DEAD ! Any Help ?	Brka	Panasonic	0	07-14-2000 20:08

08-05-2010, 21:09	#3 (permalink)
kzafquiel Freak Poster Join Date: Jun 2010 Location: MEXICO Posts: 343 Member: 1318721 Status: Offline Thanks Meter: 166	por lo regular es es modulo del teclado