PadFinder box update! New Spreadtrum tool released!

[GSMtricks]

Dear clients! We were working hard to develop an absolutely unique tool, and now we take our pleasure to present you our NEW development - "Spreadtrum tool"! This software was espacially developed for working with the SC 6600D and SC 6600E handsets.

The main peculiarity of our software lays in the possibility to find the pinout and work even with "dead" phones.

Moreover, you dont need to spend time and efforts for finding the correct pinout - with our new tool this will be done automatically in a while! These distinguished features marks it out from relevant tools of other competitors! Now you can Read flash info, Update firmware, Read/write EEPROM, Format file system, Empty board flashing, Backup/restore Calibration Data and much more! With our new development - Spreadtrum tool - you will be able to work with the phones, which seemed to be hopeless!

New Spreadtrum tool v.1.0 released - 2 new models added: 8600, N55 and Q558. Added support for SC 6600D MCU-based, SC 6600E MCU-based phones. Full service tool for Spreadtrum MCU based phones!

Main tool v.1.7 released also - added support for automatic pin looking for Spreadtrum MCU based phones!
Supported phone models list:

SC 6600D MCU-based
SC 6600E MCU-based
CECT: 3838, Q380
SED: AK606

Software description:

- Support SC 6600D MCU-based, SC 6600E MCU-based
- Added "twin flash" option
- Phone structure autodetection
- Memory size autodetection
- Firmware version autodetection
- Possibility to connect the phone on different speed ( 460800, 115200 )
- Full flash backup/restore from backup option
- File system formatting option
- Reset to default values option
- Possibility to read/write eeprom
- Empty board flashing possibility
- Pinout autodetect for "dead" phones
- Dead phones repairing
- Theft protection Lock
- Automatic recalculation of security zone
- Auto Calibration backup
- Supports Initialization the phone after the process
- Keeps Calibration data ( frequency settings, battery settings, LCD, sound )
- Supports IMEI repair/change
- Restores Calibration Data
- Connect/read MCU Firmware, System EEPROM, User Data, Product Data

Manual for working with Spreadtrum Tool

1. Connect the phone and find the pinout using PadFinder ( see the manual on HOW TO FIND PINOUTS )

ATTENTION!
* The phone has to be powered on and work in its usual manner.
* For finding pinout DONT PRESS "Power On" button
* Pinout detection allows you to find the pinout for working even with "dead" phones, though the whole procedure may take up to 2-3 min.

http://www.padfinder.net/UserFiles/Image/Manual1-2.JPG

2. It is strongly recommended to select the appropriate model from the models list! If you havent found the suitable one there, than choose "Autoselect".

3. Press "Read Phone Info" button and read the handset information.

http://www.padfinder.net/UserFiles/Image/Manual3.JPG

4. Select the appropriate flashfile from our support area and press "Connect/Read Flash Info"

http://www.padfinder.net/UserFiles/Image/Manual4.JPG

5. Update firmware:
a) if the phone is "dead", enable "MCU Firmware", "System EEPROM", "User Data", "Product Data" buttons under "Connect/read Flash Info" button;
b) if the phone is functioning well, than enable just "MCU Firmware" button.

http://www.padfinder.net/UserFiles/Image/Manual5.JPG

6. Power on the phone after the process.

7. If you enter the "Backup/restore" bookmark, youll be able to Backup All Flash/Restore From Backup.
ATTENTION! Dont forget to power on the phone after the process!

http://www.padfinder.net/UserFiles/Image/Manual7.JPG

8. EEPROM backup/restore allows you to backup/restore the handsets values
ATTENTION! Dont forget to power on the phone after the process!

9. There is a possibility to Restore Calibration Data even after the phone was flashed with full backup from other phone. In this case youll have an opportunity to retore its native Calibration Data and old IMEI.

10. You can set new IMEI in couple of clicks.

http://www.padfinder.net/UserFiles/Image/Manual10.JPG

11. With "Backup/Restore User Data" buttons you will be able to backup/restore Phone settings, Phonebook etc.
ATTENTION! It is recommended to keep the handset active during the process.

12. "Reconnect Power" button reconnects the power supply.

13. "Theftprot Lock" - allows you to find your stolen phone. If you set the code to the phone, than as soon as the phone is powered on, youll get the SMS with the info about its location.

_________________
GSMtricks - Multi-box TEAM
http://gsmtricks.com.ua/forum/images/multi-box.gif