HTC M7ul IMEI unknown bandabase unknown

[Calipjazz]

Good evening I have a HTC M7ul which purchase was working perfectly asked me upgrade and did, my biggest surprise is that after the restart upgrade and run out signal look for the IMEI and says unknown seek baseband and is also in unknown eh I tried everything Official Ruu probe Rom cooked and nothing and nothing to make matters worse this S-On and HBOOT at 1.61 please i need your help to find out who could do amazing is that all getvar fastboot everything appears normal ....... ...

excuse my bad English

E:\HTC\adb nuevo>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.18.531.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA34######
(bootloader) imei: 355#########
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 3854mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-331585dd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.085s

[.::AssAnovic.::]

You need to make S-OFF and SUPERCID and the best Tools is XTC2CLIP
it's very easy

[Calipjazz]

you believe that the problem with XTC2CLIP IMEI is resolved and Baseband

[jamesjerss]

Mostly yu can solve these issues by downgrading or by writing other region firmware's.
But yu need s-off .

[Calipjazz]

jamesjerss you could explain to me how to solve the problem

[jamesjerss]

Once flash this ruu M7_UL_L50_SENSE60_MR_TMOUS_7.18.531.2_Radio_4T.35. 3218.16_10.33Q.1718.01L_release_421697_signed_2.ex e

if not solved Root nd s-off yur device using sunshine apk not free 25$ or need professional tools (no need root)
After s-off done change model id to international write Europe stock or else with out changing model id
write tmobile old version stock.

[Calipjazz]

install the ruu RUU M7_UL_L50_SENSE60_MR_TMOUS_7.18.531.2_Radio_4T.35. 3218.16_10.33Q.1718.01L_release_421697 but I did not solve the problem I'm still in S-on what should I do?

[meisam]

I have just the same condition.Phone has imei while read info in fastboot.This device came to me with boot loop.I got

"OTA_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.2-6.09.401.12_release_42179188gkfafn9lz4k6hj"

extracted "Firmware.zip" flashed to phone then installed

"RUU_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.2_Radio_4T.35.3218.16_10.33Q.1718.01L_release_444790_signed_2_4"

Then i had NO Baseband-IMEI problem.Now tried "RUU_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.22_R adio_4T.35.3218.16_10.33Q.1718.01L_release_430964_ signed_2_4.exe"
but result is the same.What else can i do please?
Below you can see phone info:

[meisam]

Reading information...
Using Fastboot mode...
Reading common information
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.19.401.22
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT36SW904492
(bootloader) imei: 357864050582178
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3733mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Execution time is 62(ms)
all: Done!
8064 detected, reading IMEI2 ...
... (bootloader) [ERR] Command error !!!
Execution time is 15(ms)
OKAY
Reading secure flag information
... (bootloader) secure_flag: 0
Execution time is 15(ms)
OKAY
Reading CID information
... (bootloader) cid: 11111111
Execution time is 15(ms)
OKAY
Reading MEID information
... (bootloader) meid: 00000000000000
Execution time is 15(ms)
OKAY

By the way how cani change model id please?!!!

[meisam]

Also installed "ViperOne+9.0.0-fix" and the result is the same.