GSM-Forum - ****Free New Palm Pre Models Unlock****

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- PalmOS /HP and others (https://forum.gsmhosting.com/vbb/f487/)

- - ****Free New Palm Pre Models Unlock**** (https://forum.gsmhosting.com/vbb/f487/free-new-palm-pre-models-unlock-1327184/)

Unlock_Master

08-12-2011 21:34

****Free New Palm Pre Models Unlock****

Install python 2.6.x (32 bit version): http://www.python.org/download/releases/2.6/
Install pywin32 for python 2.6: http://sourceforge.net/projects/pywin32/files/
Install pyserial: http://sourceforge.net/projects/pyserial/files/
Download the unlocker (https://rapidshare.com/files/4274996479/Paml_Pre.zip) and unpack it (e.g. into the directory C:\pre)
Calculate the USB passthrough key: go to device info, write down the "Serial Number" (P7...), and use pre_keygen.py to generate the key from this number.
Put your Palm Pre into USB Passthrough mode: enter "#*USBPASS# (#*8727277#) and press the dial icon. A window will appear which asks you to enter the passthrough key. After you've done that, select "Diag" for the "USB PORT 1".
Connect your phone to your machine and install these drivers.
Run pre_unlock.py and write down your network unlock code.
Disable the passthrough mode: enter "#*USBPASS# (#*8727277#) and press the dial icon again. Set "None" for "USB PORT 1".
Shutdown the phone. Put in a SIM card that is not accepted by the phone and boot it up again.
Carefully enter the network unlock code obtained in step 8. If it gets rejected, please contact me with the perso.txt file that has been saved to the directory of the script. Reboot and enjoy your unlocked phone.

POSSIBLE SUPPORT THESE MODELS

Palm Pixi
Palm Pixi Plus
Palm Pre
Palm Pre Plus
Palm Pre 2

LET ME KNOW :D

Another link For Rapidshare
MEGAUPLOAD - The leading online storage and file delivery service

fun	08-26-2011 16:44

Quote:

Originally Posted by mrkhanz (Post 7622232)

Install python 2.6.x (32 bit version): http://www.python.org/download/releases/2.6/
Install pywin32 for python 2.6: http://sourceforge.net/projects/pywin32/files/
Install pyserial: http://sourceforge.net/projects/pyserial/files/
Download the unlocker (https://rapidshare.com/files/4274996479/Paml_Pre.zip) and unpack it (e.g. into the directory C:\pre)
Calculate the USB passthrough key: go to device info, write down the "Serial Number" (P7...), and use pre_keygen.py to generate the key from this number.
Put your Palm Pre into USB Passthrough mode: enter "#*USBPASS# (#*8727277#) and press the dial icon. A window will appear which asks you to enter the passthrough key. After you've done that, select "Diag" for the "USB PORT 1".
Connect your phone to your machine and install these drivers.
Run pre_unlock.py and write down your network unlock code.
Disable the passthrough mode: enter "#*USBPASS# (#*8727277#) and press the dial icon again. Set "None" for "USB PORT 1".
Shutdown the phone. Put in a SIM card that is not accepted by the phone and boot it up again.
Carefully enter the network unlock code obtained in step 8. If it gets rejected, please contact me with the perso.txt file that has been saved to the directory of the script. Reboot and enjoy your unlocked phone.

POSSIBLE SUPPORT THESE MODELS

Palm Pixi
Palm Pixi Plus
Palm Pre
Palm Pre Plus
Palm Pre 2

LET ME KNOW :D

Another link For Rapidshare
MEGAUPLOAD - The leading online storage and file delivery service

Palm Pre Plus Code rejected. Need your help
Here is my perso.txt Download perso-359958030002030.txt for free on Filesonic.com

rogerboogie

08-29-2011 09:56

Quote:

Originally Posted by mrkhanz (Post 7622232)

Install python 2.6.x (32 bit version): http://www.python.org/download/releases/2.6/
Install pywin32 for python 2.6: http://sourceforge.net/projects/pywin32/files/
Install pyserial: http://sourceforge.net/projects/pyserial/files/
Download the unlocker (https://rapidshare.com/files/4274996479/Paml_Pre.zip) and unpack it (e.g. into the directory C:\pre)
Calculate the USB passthrough key: go to device info, write down the "Serial Number" (P7...), and use pre_keygen.py to generate the key from this number.
Put your Palm Pre into USB Passthrough mode: enter "#*USBPASS# (#*8727277#) and press the dial icon. A window will appear which asks you to enter the passthrough key. After you've done that, select "Diag" for the "USB PORT 1".
Connect your phone to your machine and install these drivers.
Run pre_unlock.py and write down your network unlock code.
Disable the passthrough mode: enter "#*USBPASS# (#*8727277#) and press the dial icon again. Set "None" for "USB PORT 1".
Shutdown the phone. Put in a SIM card that is not accepted by the phone and boot it up again.
Carefully enter the network unlock code obtained in step 8. If it gets rejected, please contact me with the perso.txt file that has been saved to the directory of the script. Reboot and enjoy your unlocked phone.

POSSIBLE SUPPORT THESE MODELS

Palm Pixi
Palm Pixi Plus
Palm Pre
Palm Pre Plus
Palm Pre 2

LET ME KNOW :D

Another link For Rapidshare
MEGAUPLOAD - The leading online storage and file delivery service

i tryed but no sucess , when i execute palm_unlock script only cmd windows open and close 1 second later, all is intsalled well , and i tryed on 2 clean pc, any idea ?

Unlock_Master

08-30-2011 14:17

Sorry For Late Reply

Here is a NEW VERSION v1.3

MEGAUPLOAD - The leading online storage and file delivery service

Any probelm let me know

luigivsf

08-30-2011 16:24

At least give credit to his original author...

Unlock_Master

08-30-2011 19:24

Forget to Mention

Thanks to dogber for this software :D i just couldnt see free soultion for members to unlock there palm pre so i just helped out

shanti20

09-07-2011 00:20

Could any one help me with the Diag Drivers......any links??
I'm having trouble finding it on google....as I'm trying to Unlock my Palm pre plus.

YOUR HELP IS APPRECIATED

shanti20

09-07-2011 01:06

I tried to install the Diag Drivers from the following link Palm Pre, Centro, and Treo 800 Qualcomm Diagnostic Drivers | Random ****
It sucessfully installed two drivers but throwing the following msg " Windows was unable to install your RNDIS Ethernet Gadget"

Please provide with some suggestions.

Thanks in advance

moonsca

09-07-2011 06:11

thanksgiving，3Qqqqqqqqqqqqqqqqqqqqq

B0MBACI

09-12-2011 18:25

Does this also work with the HP VEER?

aliunlock

09-13-2011 04:06

Quote:

Originally Posted by B0MBACI (Post 7709767)

Does this also work with the HP VEER?

hp veer 4g can be unlocked by soft+registeration code, like pre, pixi. But soft is not this one.

s400py

09-14-2011 08:09

trying to hide my authorship by removing the copyright and not mentioning my blog is just going to make you look like an imbecile.

BOGUS0404

09-14-2011 15:01

palm pre2
Scanning serial ports...
Diagnostics serial port: COM95

IMEI: 0124920000------
Software Build ID: 0.5.60(5021)

Patching EFS file permission descriptors.
Unknown firmware version.

no perso.txt please help

BOGUS0404

09-15-2011 09:25

[QUOTE=BOGUS0404;7715393]palm pre2
Scanning serial ports...
Diagnostics serial port: COM95

IMEI: 0124920000------
Software Build ID: 0.5.60(5021)

Patching EFS file permission descriptors.
Unknown firmware version.

no perso.txt please help

ok done

thanks

GSM Deals

09-18-2011 20:22

tested on palm pixi plus and not working can not go beyond "scaning serial ports... " diag drivers are installed correctly
regards

Babamobiles

09-28-2011 15:24

Palm Pre not unlocked

I tried to unlock the Palm pre plus, it is not unlocked by this tool.
I used 1.4 version, and the codes which are generated by this tool shows PIN INCORRECT in mobile display.

s400py

09-28-2011 15:59

if you would have consulted my blog post instead of mrkhanz' cheap knockoff, you'd stumbled across the "--writeBack" parameter which is going to unlock your device.

somasekhar1

10-17-2011 22:07

Thanks Dogbert... i unlocked my palmpre... Thanks a lot..

MBtech

10-30-2011 11:45

Quote:

IMEI: 35xxxxxxxxxx89
software buil id: XU1.5.5<3106>

Patching EFS file permission descriptors...
Unknown firmware version.

What's the problem?

Thx.

GSM Deals

10-31-2011 10:43

Quote:

Originally Posted by MBtech (Post 7844196)

What's the problem?

Thx.

modem version on you device not supported just upgrade to HP webOS 2.1.0 and retry
regards

stinky180

11-02-2011 18:36

Quote:

Originally Posted by s400py (Post 7719014)

the latest and greatest version is always here:
Dogbert's Blog: Unlocker for Palm Pre GSM Phones

so dogbert, what exact models work with your method? does it work with the 'plus' models?

mohit_kripalu01

02-21-2012 15:34

Quote:

Originally Posted by s400py (Post 7757216)

if you would have consulted my blog post instead of mrkhanz' cheap knockoff, you'd stumbled across the "--writeBack" parameter which is going to unlock your device.

i unlock before 2 fone but this time give me shows PIN INCORRECT

can you tell me cammand line i try to write

cd c:\
cd:\ --writeBack nothing happend

plz guide me

tonygsm20

07-14-2012 01:10

unlock sucessfull

use driver : PixiePreTreo800wCentroUSBnet_0316_beezl.zip - 4shared.com - online file sharing and storage - download

Tank	09-11-2012 21:04

Hi.Have problem with unlock my Palm Pre.What to do?
Thnx

C:\>unlock\pre_unlock.py diagPort COM12
pre_unlock.py v1.9
Copyright (c) 2011 dogbert <[email protected]>, Dogbert's Blog
This scripts reads the unlock code of Palm Pre/Pixi GSM Phones.

Diagnostics serial port: COM12

IMEI: 358139021xxxxxx
Software Build ID: CU0.5.42(257)

Patching EFS file permission descriptors...
Reading personalization file from EFS...
Traceback (most recent call last):
File "C:\unlock\pre_unlock.py", line 380, in <module>
main()
File "C:\unlock\pre_unlock.py", line 357, in main
f.write(c)
TypeError: argument 1 must be string or buffer, not None

GSM_BB5

10-20-2012 05:46

all lines err not working
pl z link good

...:::JamalMustafa:::...

12-08-2012 19:58

pre3_veer_unlock.py v1.5
Copyright (c) 2011 dogbert <[email protected]>, Dogbert's Blog
This script reads the unlock code of HP Veer/Pre3 phones.

Scanning serial ports...
Diagnostics serial port: COM55

IMEI: 012604000061247
Software Build ID: BU1.9.15(264)

Reading personalization file from SFS...
Network Control Code: 81590502

Rebooting phone...
done.

Salem_Gsm

12-23-2012 11:56

tested

solution worked for me
palm pixi unlocked
http://i47.tinypic.com/1hcegy.jpg

misio2

03-31-2013 17:08

palm pre2
Scanning serial ports...
Diagnostics serial port: COM8

IMEI: 358139021216951
Software Build ID: CU0.5.42(257)

Patching EFS file permission descriptors...
Reading personalization filr from EFS...
Network Control Code. 57022344

Rebooting Baseband Modem...
done.

misio2

03-31-2013 17:10

Network Control Code. 57022344
Not accepted this code

plzzz help friends

misio2

03-31-2013 18:03

1 Attachment(s)

palm pre
Scanning serial ports...
Diagnostics serial port: COM8

IMEI: 358139021216951
Software Build ID: CU0.5.42(257)

Patching EFS file permission descriptors...
Reading personalization filr from EFS...
Network Control Code. 57022344

Rebooting Baseband Modem...
done.

misio2

03-31-2013 18:08

palm pre not acccepted code

1 Attachment(s)

aimaX

10-13-2013 20:57

SS, cant get windows USB config with #*8727277# in palm pixi plus
i get a diag port but :(

Code:

C:\unlock>pre_unlock.py diagPort COM12

pre_unlock.py v1.9

Copyright (c) 2011 dogbert <[email protected]>, http://dogber1.********.com

This scripts reads the unlock code of Palm Pre/Pixi GSM Phones.
 

Traceback (most recent call last):

  File "C:\unlock\pre_unlock.py", line 380, in <module>

    main()

  File "C:\unlock\pre_unlock.py", line 333, in main

    diagPort = findSerialPorts(portName)

  File "C:\unlock\pre_unlock.py", line 275, in findSerialPorts

    if checkDiagPort(port, "TSNCJOLYM"):

  File "C:\unlock\pre_unlock.py", line 264, in checkDiagPort

    ser = serial.Serial(port, 115200, timeout=0)

  File "C:\Python26\Lib\site-packages\serial\serialwin32.py", line 30, in __init

__

    SerialBase.__init__(self, *args, **kwargs)

  File "C:\Python26\Lib\site-packages\serial\serialutil.py", line 260, in __init

__

    self.open()

  File "C:\Python26\Lib\site-packages\serial\serialwin32.py", line 68, in open

    self._reconfigurePort()

  File "C:\Python26\Lib\site-packages\serial\serialwin32.py", line 177, in _reco

nfigurePort

    raise ValueError("Cannot configure port, some setting was wrong. Original me

ssage: %s" % ctypes.WinError())

ValueError: Cannot configure port, some setting was wrong. Original message: [Er

ror 5] AccÞs refusÚ.
 

C:\unlock>

mobilegsm30

01-14-2014 13:23

Hello any one have Paml_Pre.zip please upload here?

micmac

11-10-2014 13:24

1 Attachment(s)

C:\unlock>pre_unlock.py --diagPort COM28
pre_unlock.py v1.9
Copyright (c) 2011 dogbert <[email protected]>, Dogbert's Blog
This scripts reads the unlock code of Palm Pre/Pixi GSM Phones.

Diagnostics serial port: COM28

IMEI: 351956040206714
Software Build ID: XU1.6.13(3125)

Patching EFS file permission descriptors...
Reading personalization file from EFS...
Network Control Code: 97064292

Rebooting Baseband Modem...
done.

code not accepted any help plz ?

micmac

11-10-2014 13:42

Solved with this command --writeBack

williboy12

11-20-2014 15:52

i need software update

C:\Documents and Settings\unlocked>pre_unlock.py --diagPort COM14
pre_unlock.py v1.9
Copyright (c) 2011 dogbert <[email protected]>, Dogbert's Blog
This scripts reads the unlock code of Palm Pre/Pixi GSM Phones.

Diagnostics serial port: COM14

IMEI: 012166000200811
Software Build ID: XU1.6.3(3115)

Patching EFS file permission descriptors...
Unknown firmware version.

bahrihoti

03-29-2015 23:00

hi
i have palm pre and i nead diag authorization code
serial number of my phone is p5hu69n9547r
can you help ,e

foaaed-1

10-26-2022 21:20

This is very good thank you

All times are GMT +1. The time now is 04:23.

Page generated in 0.35783 seconds with 6 queries

SEO by vBSEO