Originally Posted by jamesjerss (Post 10499061)

Unbrick yur playbook using AutoLoader

http://crackberry.com/sites/crackber...ook_white1.jpg

Playbook AutoLoader

* Download Below given Autoloader OS

* Run the Autoloader.exe

* Connect yur playbook to yur pc

* Press power button for 10 to 12 sec nd release

* If yur Playbook detected by pc it vil start the process

PlayBook OS 2.1.0.1753 Download

PlayBook OS 2.1.0.1917 Download



Guide to update via pc using desktop manager

Download Latest Desktop manger here

Update using Desktop Manager


* Connect the BlackBerry PlayBook to a computer running BlackBerry Desktop Software
On the home screen of the BlackBerry Desktop Software, click Update.

* To download an update, click Get Update.

* To view other available versions of the BlackBerry® PlayBook OS software, click View other versions. If applicable, select another version. Click Install.

* After the BlackBerry PlayBook OS update is complete, disconnect the BlackBerry PlayBook from the computer.

Unbricking Tutorial


Open up BlackBerry Desktop Manager on your Computer
and plug in the bricked PlayBook using the USB Cable.
It will bring up a window that says “BlackBerry Desktop
Software cannot communicate with the connected device.”
and present you with options to “Retry“, “Update“or “Cancel“

http://s27.postimg.org/rcfdqoqsj/BB_...e_with_the.png

If it doesnt bring up this window when you plugged in
your PlayBook via USB, consider unplugging and reconnecting,
possibly to a different USB port, until you hear that familiar
sound your computer uses to indicate a newly connected device.

On the popup window, click “Retry” first, to allow it to attempt
to reboot your PlayBook for you. Be patient as it will take a while.

If after 10 mins and your PlayBook still won’t boot, unplug and reconnect
it again until it opens up the same window described and shown in Step 3.
When presented with the choices to Retry, Update, Cancel, click on “Update” this time.
BlackBerry Desktop Software will open up a new popup window “Confirm device repair“,
and forewarn you of what you’re about to do.

http://s27.postimg.org/fsjqq4wir/image.png

Click on “Repair”. This will then open up a popup window that says “Checking for
BlackBerry Tablet OS Updates“. Duration will depend on computer resources and internet
connection, but it should take only about a minute.

http://s27.postimg.org/3yl6jzd0j/image.png

n some cases, you may be prompted/asked to “Reset your device.”
before BlackBerry Desktop Software can proceed in checking for the OS Updates.
Just follow the instruction provided [as shown in the picture below].

http://s27.postimg.org/lyudod57n/image.png

Once BlackBerry Desktop Software completes the OS Update check,
it will report the latest officially available OS for your PlayBook,
and prompt you to either “Get update” or “Update later“.

http://s15.postimg.org/wyd2db8rf/image.png

Click on “Get update.” This will bring up another
confirmation popup window forewarning you of the duration,
and giving you the option to “Install update” or “Cancel“.

http://s15.postimg.org/jzfuo1dej/image.png

Click on “Install update” if you are totally sure.
BlackBerry Desktop Software will begin the download process,
which can take up to hours depending on your internet connection speed

Once it’s done downloading, BlackBerry Desktop Software will
then automatically extract and install the OS onto your PlayBook,
and then connect to the PlayBook to reboot it

http://s16.postimg.org/mcyphu005/image.jpg

If everything proceeded well, your PlayBook should boot up

Originally Posted by salik.iqbal (Post 10701085)

links are not working of files, can you please update it? :(

Originally Posted by mike_shinoda (Post 10704309)

last ver 2.1.0.1917

http://forum.gsmhosting.com/vbb/10698572-post79.html

Originally Posted by jamesjerss (Post 10499061)

Originally Posted by venu_151415 (Post 11537583)

hi jamesjerss sir
plz solve my problem how to remove/bypass blackberry id in playbook
thankq....