|
MML Failure at 'Waiting for full connect...' Red LED Flashing Twice Hello... I'm hoping someone can pop in here with some help for me possibly. I have successfully unbranded, unlocked, rebranded a few BB Bolds and 83XXs. This morning I was attempting to unbrand a warranty replacement Bold and I ran into a problem I've never seen before. Following the status quo instructions, MML will do it's magic with the auto start on, full erase off, however when it reaches the point where I am supposed to have the white OS screen and FAIL on MML, I get the FAIL on MML but I have a black screen with the LED pulsing twice about every 5 seconds. When I enter the menu to attempt to clear the MEP and load the VSM I get an error saying something like MML can't connect to the radio. The device also seems to have all zeros for it's PIN. So, my only way out of this is to pull the battery and reload the OS, which works fine and restores the PIN, however when I attempt again with MML I run into the same problem. I thought I might have needed a bit more charge in the battery so I let it get to 85% and still the same problem. Anyone have any suggestions please? Thank you. |
i have the same and i cant upload the VSM file witch is VSM-11697-001 pls help me i want unlock my phone bb 9000 bold and 8900 curve thanks an advance,, Ammari |
same problem here.. any solutions? |
try to reinstall multi loader |
check your Bin Dir in MML folder that should be 11.4 MB this problem already discussed in this section |
check your Bin Dir in MML folder that should be 11.4 MB this problem already discussed in this section |
reinstall 2.0.1.3 from rar file tried 1.8.1.3 setup no luck... link to thread? BIN dir is 10mb |
yes me tooooooooo have same problem |
any help regarding this? |
anyone can help us !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1 |
the bin is 10 mb,who is tried on bold 9000? |
my bin is 10mb so that mean is missing as you sayed should be 11.4 mb how can i know the missing items?? |
my bin is 10mb so that mean is missing as you sayed should be 11.4 mb how can i know the missing items??:D |
BLACKBERRY RESTORE FILE NOT AVIABLE!! please help >>>>wich file should be and where should located>>>my bb bold 9000 is possible to unlock it??? v4.6.0.247 is it working on this version or i should downgrade my version!!! BB:2131B506 |
plz double check the IMEI, it should be the NEW Security ~ |
use full bettry then try again |
imei:980041.00.555859.6 what is new security means cant unlocked? |
Imei is : 980041005558596 is it mean cant get unlocke? Thanks ammari bb:2131b506 |
Who did success unlock bb 9000 ? |
Hey peeps, I finally received a bold to try. Alot of people seem to be getting problems with unlocking bold's using mml. It must be that those are new security??? Well firstly i used mml 1.8 an the bold imei 35xxx02xxxxxx. I did the 1st run as normal with bold's - battery out, auto-start checked, nuke unchecked. The program hanged at loading mep/mfi (can't remember which) but then it failed due to connection error. I then restart the program an re-connect the bold with the battery in, the program hangs again at mfi/mep (very long this time), the led blink twice, pause,blink twice, but also on the screeen of the device, the '1' was showing (a normal sign of unlock complete). MML didn't pass/fail only hang, so i just unplugged the phone at this point, and had to force-close mml. I type start, then reflash the device using DM and check the locks, all locks disabled, unlock complete! |
reallly that is great could you past for me MFI MULTILOADER SETUP LINKE WITH LINKS OF THE PARTS!!! THANKS AMMARI BB:2131B506 |
TODAY I USE BB_UNLOCKER I GET EVERY THING DONE BUT MY BB STILL LOCKED PLEASE FIND MASSEG BELOW>>>> Starting... Hardware ID: 9000 Bootrom: 5.4.0.23 APP Version: DSPOS Version: SFI File: 9000-v_P.sfi Timeout: 120000 *** BLACKBERRY RESTORE FILE AVIABLE! *** ;o) Reading Phone Info... Loading loader... Loading Factory OS... CANT READ APP VERSION! FACTORY OS DETECTED!!! CANT READ DSPOS VERSION! 9000 found... Starting... Hardware ID: 9000 Bootrom: 5.4.0.23 APP Version: DSPOS Version: SFI File: 9000-v_P.sfi Timeout: 120000 *** BLACKBERRY RESTORE FILE AVIABLE! *** ;o) Reading Phone Info... Loading loader... Loading Factory OS... CANT READ APP VERSION! FACTORY OS DETECTED!!! CANT READ DSPOS VERSION! 9000 found... Starting... Hardware ID: 9000 Bootrom: 5.4.0.23 APP Version: DSPOS Version: SFI File: 9000-v_P.sfi Timeout: 120000 *** BLACKBERRY RESTORE FILE AVIABLE! *** ;o) BOOTING BLACKBERRY WITH LOADER: MFI-17584-032 MML RUNNING Clear MEP Zone... MEP Zone Cleared! UNLOCKED SUCCESSFULLY!!! ;-) Searching Restore file... *** BLACKBERRY SFI FILE AVIABLE! *** ;o) Restoring with 9000-v_P.sfi please wait... ANY IDEA ......? BEFOR THE RESTORE FILE NOT SHOEING FOR ME I FIX THE PROBLEM THAT YOU SHOULD USE THE ICON FROM THE C:BB_UNLOCKER THIS WILL FIX RESTORE FILE>>>>> :) |
Quote:
|
what is furious? and how can i get it!!! please help!!! THANKS ALOT DUDE....:) AMMARI BB:2131B506 |
Disconnect the internet connection & try. |
i do every thing but nothing change >>>>:( |
Quote:
|
did u unlock the bold 9000 please help!! pls add me so i can talk to you direct pls bb:2131b506 AMMARI |
RIM BLACKBERRY 7xxxx 8xxx 9xxx Unlocker by: Harald Kubovy www.entsperren.net Reading Phone Info... Loading loader... Loading Factory OS... CANT READ APP VERSION! FACTORY OS DETECTED!!! CANT READ DSPOS VERSION! 9000 found... Starting... Hardware ID: 9000 Bootrom: 5.4.0.23 APP Version: DSPOS Version: SFI File: 9000-v_P.sfi Timeout: 120000 *** BLACKBERRY RESTORE FILE AVIABLE! *** ;o) BOOTING BLACKBERRY WITH LOADER: MFI-17584-032 MML RUNNING Clear MEP Zone... MEP Zone Cleared! UNLOCKED SUCCESSFULLY!!! ;-) Searching Restore file... *** BLACKBERRY SFI FILE AVIABLE! *** ;o) Restoring with 9000-v_P.sfi please wait... every thing done after unlock my phone bb 9000 i got white page after restorning and there is alot of commands.....any idea...please help!! bb:2131b506 AMMARI |
Using bb_unlocker with mfi multiloader 2.0.1.3 the come togather in rar file 7 parts>>just make setup i get shortcut on desktop of bb_unlocker when i press the icon they appears togather bb_unlocker and mfi multiloader ?! Is that correct? Or should use onther one? Thanks for your answers all :) |
Quote:
any update on my post??:( |
try flashing/mml without bat, wait until full connect put it back the bat or pull out the cable and put in cable again |
reload os and use jl cmdr and choose number 5, and try mml again |
my mfi multiloader 1.8 is not working any more it just appear for me the window of mfi i check autostart but nothing happen? any idea> i try unstall and install again its same not working anymore just appear the window>>> i have only BB_UNLOCKER is working will but my phone still locked.... wts wrong? |
some one post for me the correct mfi.exe and all parts please ....thanks all for yours answers :) |
find full mml http://www.maxpda.com, extact and overwrite to c:/mml, good luck |
Thanks man i will keep you update with news |
i cant find any file ??!!! and cant understand for this languge? could you ple ase paste onther link please?! thanks!!! |
| All times are GMT +1. The time now is 14:47. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -