PS4 beeps 3 times and shutsdown no video - GSM-Forum

cprtom · 12-02-2015, 18:48

I had replaced HDMI port on this PS4. I'm not sure exactly what happened but it looks like all the solder joints were cold joints and somehow broke free. Doesn't look like it lifted any traces on the board. I re-soldered the port down, and this time I scuffed the edges and the pins to ensure good fresh metal, with no corrosion so it should have bonded good this time. Looks like a good solid solder joint now. I'm not sure if when it broke it shorted something out, or if something else entirely has gone wrong, however when I try to turn it on it has no video, It will beep three times, then turn off.

I've made a brief video showing the issue however I can't post links here yet. Its posted at vid dot me and the video ID is "Ped4" so if you add a slash between it will show the video. hopefully somebody can post the link for me.

Thanks in advance for any advise or insight.

BesfortShalaTec · 12-06-2015, 06:52

https://vid.me/Ped4
here is the video for others, but as of my knowledge, if u thing that graphic HDMI port connection with bord is okay, than maybe is ps4 firmware fault, or maybe graphic chip it self

as I ranamber my old ps2, even if ther is no TV out , or HDMI out in newer ps, the console should at least be ON, and not beep, so that means is not only hdmi port fault, check if u damaged anything on bord

cprtom · 12-07-2015, 16:29

Thanks for the tips. I didn't see any obvious signs of damage on the board. I'm about at the point of just getting another one. Thanks for trying though, I appreciate it.

12-02-2015, 18:48	#1 (permalink)
cprtom Junior Member Join Date: Oct 2015 Posts: 2 Member: 2470119 Status: Offline Thanks Meter: 0	PS4 beeps 3 times and shutsdown no video I had replaced HDMI port on this PS4. I'm not sure exactly what happened but it looks like all the solder joints were cold joints and somehow broke free. Doesn't look like it lifted any traces on the board. I re-soldered the port down, and this time I scuffed the edges and the pins to ensure good fresh metal, with no corrosion so it should have bonded good this time. Looks like a good solid solder joint now. I'm not sure if when it broke it shorted something out, or if something else entirely has gone wrong, however when I try to turn it on it has no video, It will beep three times, then turn off. I've made a brief video showing the issue however I can't post links here yet. Its posted at vid dot me and the video ID is "Ped4" so if you add a slash between it will show the video. hopefully somebody can post the link for me. Thanks in advance for any advise or insight.

12-06-2015, 06:52	#2 (permalink)
BesfortShalaTec Cheater -Don't Deal with him- Join Date: Dec 2013 Location: XK Age: 26 Posts: 1,479 Member: 2089356 Status: Offline Sonork: Threema: 3N5W6VV9 Thanks Meter: 520	https://vid.me/Ped4 here is the video for others, but as of my knowledge, if u thing that graphic HDMI port connection with bord is okay, than maybe is ps4 firmware fault, or maybe graphic chip it self as I ranamber my old ps2, even if ther is no TV out , or HDMI out in newer ps, the console should at least be ON, and not beep, so that means is not only hdmi port fault, check if u damaged anything on bord

12-07-2015, 16:29	#3 (permalink)
cprtom Junior Member Join Date: Oct 2015 Posts: 2 Member: 2470119 Status: Offline Thanks Meter: 0	Thanks for the tips. I didn't see any obvious signs of damage on the board. I'm about at the point of just getting another one. Thanks for trying though, I appreciate it.