Adding a internal SD card to most ONE models - GSM-Forum

Downunder35m · 03-31-2012, 10:23

Warning! These instructions are not for the faint of heart and you should have some experience in soldering on a SMD level!
I take no responsibilty for devices damaged as I only provide the collected info and would not know if you made mistakes.
If you do this you do it at your own risk!

Until now only the V3 had instructions on how to add more memory.
This has changed and from info collected at Opentom and some other websites I'd like to share this info:

Tested according to sources on a ONX XL and a ONE V4.
Since there no solder points that clearly state the use of a SD like on the V3 people tried to find out where these points could be located on other models.
They found them

Please check these pics taken from a XL:

Here is the pinout for a SD (for micro SD use an adapter):

Several ONE models have a similar layout for the PCB and should be able to use these mods.

Credits go to Opentom and w w w. electrode.pl for the confirmation that it really works.

ixlion · 07-16-2013, 21:08

Quote:

Originally Posted by Downunder35m

Warning! These instructions are not for the faint of heart and you should have some experience in soldering on a SMD level!
I take no responsibilty for devices damaged as I only provide the collected info and would not know if you made mistakes.
If you do this you do it at your own risk!

Until now only the V3 had instructions on how to add more memory.
This has changed and from info collected at Opentom and some other websites I'd like to share this info:

Tested according to sources on a ONX XL and a ONE V4.
Since there no solder points that clearly state the use of a SD like on the V3 people tried to find out where these points could be located on other models.
They found them

Please check these pics taken from a XL:

Here is the pinout for a SD (for micro SD use an adapter):

Several ONE models have a similar layout for the PCB and should be able to use these mods.

Credits go to Opentom and w w w. electrode.pl for the confirmation that it really works.

Thanks Downunder35m!

03-31-2012, 10:23	#1 (permalink)
Downunder35m No Life Poster Join Date: Mar 2011 Posts: 214 Member: 1528218 Status: Offline Thanks Meter: 95	Adding a internal SD card to most ONE models Warning! These instructions are not for the faint of heart and you should have some experience in soldering on a SMD level! I take no responsibilty for devices damaged as I only provide the collected info and would not know if you made mistakes. If you do this you do it at your own risk! Until now only the V3 had instructions on how to add more memory. This has changed and from info collected at Opentom and some other websites I'd like to share this info: Tested according to sources on a ONX XL and a ONE V4. Since there no solder points that clearly state the use of a SD like on the V3 people tried to find out where these points could be located on other models. They found them Please check these pics taken from a XL: Here is the pinout for a SD (for micro SD use an adapter): Several ONE models have a similar layout for the PCB and should be able to use these mods. Credits go to Opentom and w w w. electrode.pl for the confirmation that it really works.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
news headlines to gsm phone	mos	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	7	05-22-2016 11:42
How can I do a Welcome note for my 6110 a dosn't have any one ?	Viper	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-27-2015 11:57
How to add a language in 51xx/61xx	tati	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	05-21-2013 19:20
How to upload a new firmware...	Brand	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-08-2012 18:29
Copy from one 6110 to another	Leif Nielsen	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	06-10-1999 22:36