!!!Attention!!! MRT Tools officially not supports Meizu M3 note version L681H !!!

[bma37]

Why MRT team hard ignores the problems with the support Meizu M3 version L681H made for the international market?

Why are not you helping to solve problems associated with the use of your software product?

You upsets Leonidа Arkadevicha! - [Click to open]

Russian humor

Seriously, why support MRT-team is so bad?
/********************************************/

For example, we need to flash the phone Meizu M3 note version of the L681H which will not strike after unsuccessful flashing. We go to the site to support downloads firmware and do not find it there!

mrt tools mobile flash file download line - [Click to open]

All submitted firmware for Meizu M3 note intended for the version M681H. But you understand that the Russian did not give up.

Test firmware version for L681H was made from the dump emmc flash captured of the working phone.

Test firmware version for L681H - [Click to open]

Trying to flash a phone:

:) - [Click to open]

20 minutes passed !!!!



further 10 minutes had passed. And there was a lot of windows with an error.

Why is this happening you ask?
Let's move to the folder d:\mrt_tool_ver1.67\date\mtk\mz_init\ , and with help of any hex editor open the file - note3

note3 - [Click to open]

Experienced users who once faced with the replacement emmc flash immediately understand what a text is outlined in red.
File note3 contains a list of emmc flash memory that supports preloader.
This file was obtained from the preloader, which is flashing in M681H version of the phone Meizu M3 note.

Supported emms flash in note3 file. - [Click to open]

name = 'HAG2e' hex = 0x484147326505 [SKHYNIX]
name = 'Q313MB' hex = 0x513331334D42 [SAMSUNG]
name = '016G70' hex = 0x303136473730 [TOSHIBA]
name = 'Q823MB' hex = 0x513832334D42 [SAMSUNG]
name = 'RX1BMB' hex = 0x525831424D42 [SAMSUNG]

Let's see what types of support emmc flash preloader to the new firmware Flyme OS 5.5.1.12.1G for the phone Meizu M3 note M581H.

preloader_M681H_Flyme_OS_5.1.12.1_G.bin - [Click to open]

Found 6 supported eMMC CID:
name = 'HAG2e' hex = 0x484147326505 [SKHYNIX]
name = 'Q313MB' hex = 0x513331334D42 [SAMSUNG]
name = '016G70' hex = 0x303136473730 [TOSHIBA]
name = 'Q823MB' hex = 0x513832334D42 [SAMSUNG]
name = 'RX1BMB' hex = 0x525831424D42 [SAMSUNG]
name = 'EHACEA' hex = 0x454841434541 [KINGSTONE]

And we see the that adds support for the new emmc flash memory which is not in note3 file. even M681H version meizu M3 note not implemented full support !!!!

Is preloater of firmware Flyme OS 5.5.1.12.1G for Meizu M3 note L681H supports other types of flash memory emmc?
Yes, they are different!!! Carl!!!

preloader_L681H_Flyme_OS_5.1.12.1_G.bin - [Click to open]

Found 6 supported eMMC CID:
name = 'HAG2e' hex = 0x484147326505 [SKHYNIX]
name = 'QE13MB' hex = 0x514531334D42 [SAMSUNG]
name = 'HBG4a2' hex = 0x484247346132 [SKHYNIX]
name = 'RX1BMB' hex = 0x525831424D42 [SAMSUNG]
name = 'HAG4a2' hex = 0x484147346132 [SKHYNIX]
name = 'Q3J97V' hex = 0x51334A393756 [Unknown vendor]

That is why all users and there are problems with the Meizu M3 note version L681H.
/************************************************/

Temporary no official decision problems with L681H :

I did 3 versions of a file note3 - Download

1 version is in the folder with the name - "note3_L681H + M681H_V1" and supports the following types emmc flash memory: - [Click to open]

name = 'HAG2e' hex = 0x484147326505 [SKHYNIX]
name = 'QE13MB' hex = 0x514531334D42 [SAMSUNG]
name = 'HBG4a2' hex = 0x484247346132 [SKHYNIX]
name = 'RX1BMB' hex = 0x525831424D42 [SAMSUNG]
name = 'HAG4a2' hex = 0x484147346132 [SKHYNIX]
name = 'Q3J97V' hex = 0x51334A393756 [Unknown vendor]
name = 'Q313MB' hex = 0x513331334D42 [SAMSUNG]
name = '016G70' hex = 0x303136473730 [TOSHIBA]
name = 'Q823MB' hex = 0x513832334D42 [SAMSUNG]
name = 'RX1BMB' hex = 0x525831424D42 [SAMSUNG]
name = 'EHACEA' hex = 0x454841434541 [KINGSTONE]

2 version is in the folder with the name - "note3_L681H_V2" and supports the following types emmc flash memory: - [Click to open]

name = 'HAG2e' hex = 0x484147326505 [SKHYNIX]
name = 'QE13MB' hex = 0x514531334D42 [SAMSUNG]
name = 'HBG4a2' hex = 0x484247346132 [SKHYNIX]
name = 'RX1BMB' hex = 0x525831424D42 [SAMSUNG]
name = 'HAG4a2' hex = 0x484147346132 [SKHYNIX]
name = 'Q3J97V' hex = 0x51334A393756 [Unknown vendor]

3 version is in the folder with the name - "note3_M681H_V3" and supports the following types emmc flash memory: - [Click to open]

name = 'HAG2e' hex = 0x484147326505 [SKHYNIX]
name = 'Q313MB' hex = 0x513331334D42 [SAMSUNG]
name = '016G70' hex = 0x303136473730 [TOSHIBA]
name = 'Q823MB' hex = 0x513832334D42 [SAMSUNG]
name = 'RX1BMB' hex = 0x525831424D42 [SAMSUNG]
name = 'EHACEA' hex = 0x454841434541 [KINGSTONE]

All you need is to copy desired not3 file in "d: \ mrt_tool_ver1.67 \ date \ mtk \ mz_init \" with the replacement.

1 version file "note3" supports L681H and M681H version phone Meizu M3 note.
2 version file "note3" supports only L681H version phone Meizu M3 note.
3 version file "note3" supports only M681H version phone Meizu M3 note.

I hope that soon the MRT team officially corrected this error and will present us with a new version of the MRT tools without bugs.

P.S. I am sorry for my bad english.
Good luck in repairs !!!
And I went to drink Russian vodka and riding a bear playing on balayke

[bma37]

Download

[zbilqis]

helooo mr vodka
make tutorial for us is prefer . i ready to learn

[.::ARD::.]

wow... sorry just back for coffee time

just little advice : ..... "Above the sky, there are have another sky "

Check this Proof ! not a joke !

http://forum.gsmhosting.com/vbb/f492...-tool-2192807/

Have a good drink Bro bma37


Thread Closed !!