Meizu M3 Note Alsways Stuck On Flashing System - GSM-Forum

powertech · 05-23-2018, 03:22

This phone was working good until I try to upgrade it via SD Card. Unfortunately, flashing was success but display was distorted so I try to use MRT tool for flashing and using the flashfile for Unique blurred LCD fixed for Meizu M3 Note. The Problem now is, MRT tool stuck in flashing system like in the log below:

HW_Inf: 8A00 SW_Inf: CB00
>>> Initialization Mobile ...
>>> Sending Auth File To Mobile...Success
>>>>Trying Connect to Service verification data...
Success
>>> Downloading Boot1 To Mobile Phone...Success
Mobile phone status:SYNC...
Mobile phone status swtich to :brom...Success
Success
Make sure Mobile status has in :brom...
Init Mobile BOOT2 ...
=====================Flash Type(eMMC)==============
Flash Size: 0x0000000747C00000 -> 29820M
Flash ID: 0x150100525831424D
Flash Name: Samsung_Unknow
Flash symbol: RX1BMB
>>> Swich Mobile to Hight Speed Re\Wr Port...
Get Mobile Port is: COM8
>>> Device driver identification:
MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Fail
>>>>BMT Not exit;auto Creat BMT Block...
>>>>Flashing preloader Block data to Moblile Phone...
Start: 0x0000000000 Size: 0x000002E3D0
>>>>Flashing recovery Block data to Moblile Phone...
Start: 0x0000008000 Size: 0x0001000000
>>>>Flashing custom Block data to Moblile Phone...
Start: 0x0001088000 Size: 0x0020000000
>>>>Flashing md1dsp Block data to Moblile Phone...
Start: 0x002B000000 Size: 0x0000400000
>>>>Flashing md1arm7 Block data to Moblile Phone...
Start: 0x002B400000 Size: 0x0000300000
>>>>Flashing lk Block data to Moblile Phone...
Start: 0x002C100000 Size: 0x0000100000
>>>>Flashing lk2 Block data to Moblile Phone...
Start: 0x002C200000 Size: 0x0000100000
>>>>Flashing boot Block data to Moblile Phone...
Start: 0x002C300000 Size: 0x0001000000
>>>>Flashing logo Block data to Moblile Phone...
Start: 0x002D300000 Size: 0x0000800000
>>>>Flashing secro Block data to Moblile Phone...
Start: 0x002E500000 Size: 0x0000600000
>>>>Flashing system Block data to Moblile Phone...
Start: 0x0030000000 Size: 0x00A0000000

I try many solution, and search with this forum but still no changes.
They say that there is a bug in MRT in flashing M3 note.
Please help MRT support and make solution for these problems.

Thanks.

evgeniy1918 · 05-23-2018, 20:04

You can try to flash it using meilan max option

05-23-2018, 03:22	#1 (permalink)
powertech Freak Poster Join Date: May 2005 Age: 45 Posts: 195 Member: 143656 Status: Offline Thanks Meter: 27	Meizu M3 Note Alsways Stuck On Flashing System This phone was working good until I try to upgrade it via SD Card. Unfortunately, flashing was success but display was distorted so I try to use MRT tool for flashing and using the flashfile for Unique blurred LCD fixed for Meizu M3 Note. The Problem now is, MRT tool stuck in flashing system like in the log below: HW_Inf: 8A00 SW_Inf: CB00 >>> Initialization Mobile ... >>> Sending Auth File To Mobile...Success >>>>Trying Connect to Service verification data... Success >>> Downloading Boot1 To Mobile Phone...Success Mobile phone status:SYNC... Mobile phone status swtich to :brom...Success Success Make sure Mobile status has in :brom... Init Mobile BOOT2 ... =====================Flash Type(eMMC)============== Flash Size: 0x0000000747C00000 -> 29820M Flash ID: 0x150100525831424D Flash Name: Samsung_Unknow Flash symbol: RX1BMB >>> Swich Mobile to Hight Speed Re\Wr Port... Get Mobile Port is: COM8 >>> Device driver identification: MediaTek DA USB VCOM (Android) >>> Reading Mobile Map Data...Fail >>>>BMT Not exit;auto Creat BMT Block... >>>>Flashing preloader Block data to Moblile Phone... Start: 0x0000000000 Size: 0x000002E3D0 >>>>Flashing recovery Block data to Moblile Phone... Start: 0x0000008000 Size: 0x0001000000 >>>>Flashing custom Block data to Moblile Phone... Start: 0x0001088000 Size: 0x0020000000 >>>>Flashing md1dsp Block data to Moblile Phone... Start: 0x002B000000 Size: 0x0000400000 >>>>Flashing md1arm7 Block data to Moblile Phone... Start: 0x002B400000 Size: 0x0000300000 >>>>Flashing lk Block data to Moblile Phone... Start: 0x002C100000 Size: 0x0000100000 >>>>Flashing lk2 Block data to Moblile Phone... Start: 0x002C200000 Size: 0x0000100000 >>>>Flashing boot Block data to Moblile Phone... Start: 0x002C300000 Size: 0x0001000000 >>>>Flashing logo Block data to Moblile Phone... Start: 0x002D300000 Size: 0x0000800000 >>>>Flashing secro Block data to Moblile Phone... Start: 0x002E500000 Size: 0x0000600000 >>>>Flashing system Block data to Moblile Phone... Start: 0x0030000000 Size: 0x00A0000000 I try many solution, and search with this forum but still no changes. They say that there is a bug in MRT in flashing M3 note. Please help MRT support and make solution for these problems. Thanks.

05-23-2018, 20:04	#2 (permalink)
evgeniy1918 Major Poster Join Date: Dec 2014 Posts: 42 Member: 2313694 Status: Offline Thanks Meter: 3	You can try to flash it using meilan max option