GSM-Forum - Meizu M3 Note can't remove Flyme account

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- MRT - Mobile repair tool (https://forum.gsmhosting.com/vbb/f492/)

- - Meizu M3 Note can't remove Flyme account (https://forum.gsmhosting.com/vbb/f492/meizu-m3-note-cant-remove-flyme-account-2185155/)

Meizu M3 Note can't remove Flyme account

Meizu M3 Note with Flyme account
I use mrt_tool_v1.55, tick "Note3", "Remove account" and "Start".
Here log:

Code:

>>> Searching Mobile Port...

    Get Mobile Port is:  COM14

>>> Device driver identification: 

    MediaTek USB Port

>>> Mobile Has Connect...

    CPU_NAME: MT6755

>>> Reading Mobile Hardware Info...Success

    HW_Inf:  8A00    SW_Inf:  CB00

>>> Initialization Mobile ...

>>> Sending Auth File To Mobile...Success

>>>>Trying Connect to Service verification data...

Success

>>> Downloading Boot1 To Mobile Phone...Success

    Mobile phone status:SYNC...

    Mobile phone status swtich to :brom...Success

Success

    Make sure Mobile status has in :brom...

    Init Mobile BOOT2 ...

    =====================Flash Type(eMMC)==============

    Flash   Size: 0x00000002A3E00000 -> 10814M

    Flash     ID: 0x150100513832334D

    Flash   Name: Samsung_Unknow

    Flash symbol: Q823MB

>>> Swich Mobile to Hight Speed Re\Wr Port...

    Get Mobile Port is:  COM613

>>> Device driver identification: 

    MediaTek DA USB VCOM (Android)

>>> Reading Mobile Map Data...Success

>>>>Geting Mobile info data...

    ADD(HEX):0x0023BC8000    Size(HEX):0x0000700000    

>>>>Writeing Mobile info data...

    This Phone Support CDMA

    SN has Change to :91QEBP;5CE8E

    SN has Change to :91QEBP;5CE8E

>>>>Formating Mobile USER Data...

    ADD(HEX):0x00EB000000    Size(HEX):0x02B7DFBE00

    Corresponding operation completed!!!

    After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!

But after powering on phone still ask for flyme account.

Need help, how to remove Flyme account from Meizu M3 Note?

Remove account in version 1.33:

Code:

    Disconnect Mobile...

    Re-Put the Mobile Bettery...

    Then Connect your Phone to Computer again....

    Please Make sure Mobile better has Power...

>>> Searching Mobile Port...

    Get Mobile Port is:  COM12

>>> Device driver identification: 

    MTK USB Port

>>> Mobile Has Connect...

    CPU_NAME: MT6755

>>> Reading Mobile Hardware Info...Success

    HW_Inf:  8A00    SW_Inf:  CB00

>>> Initialization Mobile ...

>>> Sending Auth File To Mobile...Success

>>>>Trying Connect to Service verification data...

Success

>>> Downloading Boot1 To Mobile Phone...Success

    Mobile phone status:SYNC...

    Mobile phone status swtich to :brom...Success

Success

    Make sure Mobile status has in :brom...    Init Mobile BOOT2 ...

    =====================Flash Type(eMMC)==============

    Flash   Size: 0x00000002A3E00000 -> 10814M

    Flash     ID: 0x150100513832334D

    Flash   Name: Samsung_Unknow

    Flash symbol: Q823MB

>>> Swich Mobile to Hight Speed Re\Wr Port...

    Get Mobile Port is:  COM13

>>> Device driver identification: 

    DA USB VCOM Port

>>> Reading Mobile Map Data...Success

>>>>Geting Mobile info data...

    ADD(HEX):0x0023BC8000    Size(HEX):0x0000700000    

>>>>Writeing Mobile info data...

    This Phone Support CDMA

    SN has Change to :91QEBP?5CE8E

    SN has Change to :91QEBP?5CE8E

>>>>Formating Mobile USER Data...

    ADD(HEX):0x00EB000000    Size(HEX):0x02B7DFBE00

    Corresponding operation completed!!!

    After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!

Result same - phone after power on ask for Flyme account.

Connect wifi and fill account until 10x then will be unlocked

Quote:

Originally Posted by .::ARD::. (Post 12301867)

Connect wifi and fill account until 10x then will be unlocked

Very useful info! Why not add this to user manual? For example: during waiting for your answer I successfully kill phone by flashing M91-Flyme 5.1.6.0A.rar from support. I press power on button during 2 min and no result.
What you can say about this?

Revive by flashing M91_20160331214607_prd_stable.7z but now it totaly CN. Searching for euro version.

Quote:

Originally Posted by .::ARD::. (Post 12301867)

Connect wifi and fill account until 10x then will be unlocked

u mean to put it 10 times a wrong id ?

Or you can use this trick
Change the imei or rewrite the imei . It will be worked

Quote:

Originally Posted by .::ARD::. (Post 12543299)

Or you can use this trick
Change the imei or rewrite the imei . It will be worked

to change imei u need to enter this code *#*#3646633#*#* to enable port how to put that pls share a clear and crisp way to unlock account lock nothing working

Quote:

Originally Posted by Dr_Wolodya (Post 12302191)

Revive by flashing M91_20160331214607_prd_stable.7z but now it totaly CN. Searching for euro version.

Ricky bro do like this, so hard for you?

Quote:

Originally Posted by zbilqis (Post 12544398)

Ricky bro do like this, so hard for you?

guess u are not getting my point i guess i said its account locked how can i enter that code :rolleyes: hope u understood now