Is This Lumia 800 Unlockable?

[shoaibrao]

Info

NCSD Version: 1.5
SW Version: 1600.2475.7720.11414
HW Version: 112.1402.2.3
IMEI: 359289045xxxxxx
Product Code: 059L7H0
Basic Product Code: 059J2N6
Module Code: 0205051
Production SN: 003C75BAB
Public ID: 87BD6AFD0250A26A37A0237FA08547D0
WLAN MAC: 6CE907539B140000
Battery life: 99%
Number of Nams: N/A
Number of Mins: N/A
ESN: N/A
ESN Decoded: N/A
PRL Version: N/A
Battery Charge Capacity: N/A
Battery Full Capacity: N/A
Battery Cycle Count: N/A
Battery Temperature: N/A
Battery Voltage: N/A
Battery State of Charge: N/A
Battery Average Current: N/A
Battery Flags: N/A
Battery Standby Current: N/A
Battery MaxLoad Current: N/A
Battery Health State: N/A
Battery Nominal Capacity: N/A
Battery Remaining Capacity: N/A

When Press Unlock Button
Looking for phone...Done.
IMEI: 359289045xxxxxx
---------------------------------------
Please follow these steps:
1. Power off the phone
2. Remove the USB cable
3. Press and hold the Vol+ button
4. Plug the USB cable, wait for the buzz
5. Release the Vol+ button
---------------------------------------
Waiting for 30 seconds...Done.
----------------------------------------------------------------------------
Looking for NAND disk...Not found.
Things to check:
1. Is the phone connected?(Plug to the USB)
2. Is it in the correct mode?(Try to switch to OSBL mode)
3. Have you installed the Qcom loader ?(Use the Install button)


When I Press Volum+ And Insert USB Cable It Dont Show Or Ask DLoad Or QLoad Only Power On Normaly
I Need Help From NssPro Team
Thanks Anticipation...............

[shoaibrao]

USB View Info Is Here

Device Descriptor:
bcdUSB: 0x0200
bDeviceClass: 0xEF
bDeviceSubClass: 0x02
bDeviceProtocol: 0x01
bMaxPacketSize0: 0x40 (64)
idVendor: 0x045E (Microsoft Corporation)
idProduct: 0x04EC
bcdDevice: 0x0000
iManufacturer: 0x00
iProduct: 0x08
iSerialNumber: 0x09
bNumConfigurations: 0x01

ConnectionStatus: DeviceConnected
Current Config Value: 0x01
Device Bus Speed: High
Device Address: 0x01
Open Pipes: 5

Endpoint Descriptor:
bEndpointAddress: 0x81 IN
Transfer Type: Bulk
wMaxPacketSize: 0x0200 (512)
bInterval: 0x00

Endpoint Descriptor:
bEndpointAddress: 0x02 OUT
Transfer Type: Bulk
wMaxPacketSize: 0x0200 (512)
bInterval: 0x00

Endpoint Descriptor:
bEndpointAddress: 0x83 IN
Transfer Type: Interrupt
wMaxPacketSize: 0x0040 (64)
bInterval: 0x04

Endpoint Descriptor:
bEndpointAddress: 0x84 IN
Transfer Type: Bulk
wMaxPacketSize: 0x0200 (512)
bInterval: 0x00

Endpoint Descriptor:
bEndpointAddress: 0x05 OUT
Transfer Type: Bulk
wMaxPacketSize: 0x0200 (512)
bInterval: 0x00

[shoaibrao]

Any Official Will Help Me Plz???

[oblio]

Unofficial help: :P
If the phone have (unlocked) qualcomm bootloader, yes
If it is recognized as nokia_dload on vol+&power in device manager, use atf+TP+credits until Bph&co will release something hidden for some time.

[Bph&co]

Originally Posted by oblio

until Bph&co will release something hidden for some time.

need to repair my 200 W soldering iron first, hehe

[luckymobile jalandhar]

Originally Posted by oblio

Unofficial help: :P
If the phone have (unlocked) qualcomm bootloader, yes
If it is recognized as nokia_dload on vol+&power in device manager, use atf+TP+credits until Bph&co will release something hidden for some time.

if phone has unlocked bootloader then what will display in device manager ?

[oblio]

...(USB Mass Storage Device), means you have an unlocked bootloader. IF you're in Windows, it will ask if you want to format the disk. SAY NO!

[Braycel]

Originally Posted by Bph&co

need to repair my 200 W soldering iron first, hehe

Boss Can You Give Me You Sonork By Pm

Thanks

[roberts]

Originally Posted by Bph&co

need to repair my 200 W soldering iron first, hehe

Is was in off long time ago? I bet you can buy another till now.

BTW: genie drivers for win7/64 wanted.