2680s-2 supported??? - GSM-Forum

canny2 · 12-05-2009, 14:36

Hi, trying to unlock a 2680s-2 - other people on this forum seem to be able to do this! here is my problem:

Reading Genie Universal device...Done.
Genie Universal Serial Number: 100627
Genie Universal Hardware version: 01.07
Genie Universal Device Build: 00.00.00.161
Device credits: 0

Searching DCT4 Loaders...
->DCT4 Loaders Dir('Flash')......Found.
-->11 file(s) found.
-->Loaders version: v. 8.51.20.36794 for
----------------------------------------------
Reading Phone Info....Done.
Phone Version: V 04.91 03-09-08 RM-392 (c) Nokia
Phone IMEI sent to network: 359344/02/055549
Getting Phone mode...Done.
Reading Sim lock status...Done.
Configuration Key: 2343300000000000
MCC+MNC: 23433
----------------------------------------------
DCT4 - Boot in Flash Mode.
Done. Set speed.
Error!
WD2/WD3/TIKU unsupported processor detected!

i get this message when i press install button, should i press manual? is there any risk of damaging this phone if i do that?

thanks

titan_mael · 12-05-2009, 15:09

Quote:

Originally Posted by canny2

Hi, trying to unlock a 2680s-2 - other people on this forum seem to be able to do this! here is my problem:

Reading Genie Universal device...Done.
Genie Universal Serial Number: 100627
Genie Universal Hardware version: 01.07
Genie Universal Device Build: 00.00.00.161
Device credits: 0

Searching DCT4 Loaders...
->DCT4 Loaders Dir('Flash')......Found.
-->11 file(s) found.
-->Loaders version: v. 8.51.20.36794 for
----------------------------------------------
Reading Phone Info....Done.
Phone Version: V 04.91 03-09-08 RM-392 (c) Nokia
Phone IMEI sent to network: 359344/02/055549
Getting Phone mode...Done.
Reading Sim lock status...Done.
Configuration Key: 2343300000000000
MCC+MNC: 23433
----------------------------------------------
DCT4 - Boot in Flash Mode.
Done. Set speed.
Error!
WD2/WD3/TIKU unsupported processor detected!

i get this message when i press install button, should i press manual? is there any risk of damaging this phone if i do that?

thanks

change cable 10pin/ufc gpg,,set bsi to 5.1

canny2 · 12-05-2009, 15:53

Thanks mate, universal fbus cable did the job!

12-05-2009, 14:36	#1 (permalink)
canny2 Freak Poster Join Date: Feb 2006 Location: UK Posts: 220 Member: 232050 Status: Offline Thanks Meter: 23	2680s-2 supported??? Hi, trying to unlock a 2680s-2 - other people on this forum seem to be able to do this! here is my problem: Reading Genie Universal device...Done. Genie Universal Serial Number: 100627 Genie Universal Hardware version: 01.07 Genie Universal Device Build: 00.00.00.161 Device credits: 0 Searching DCT4 Loaders... ->DCT4 Loaders Dir('Flash')......Found. -->11 file(s) found. -->Loaders version: v. 8.51.20.36794 for ---------------------------------------------- Reading Phone Info....Done. Phone Version: V 04.91 03-09-08 RM-392 (c) Nokia Phone IMEI sent to network: 359344/02/055549 Getting Phone mode...Done. Reading Sim lock status...Done. Configuration Key: 2343300000000000 MCC+MNC: 23433 ---------------------------------------------- DCT4 - Boot in Flash Mode. Done. Set speed. Error! WD2/WD3/TIKU unsupported processor detected! i get this message when i press install button, should i press manual? is there any risk of damaging this phone if i do that? thanks

12-05-2009, 15:53	#3 (permalink)
canny2 Freak Poster Join Date: Feb 2006 Location: UK Posts: 220 Member: 232050 Status: Offline Thanks Meter: 23	Thanks mate, universal fbus cable did the job!