Sl3 unlock 15 credits by genie. - Page 4 - GSM-Forum

g-gabber · 11-02-2009, 09:28

Man, you post every where about SuperDongle Keys, BUT THIS IS FALSE, did you know what for Super Dongles Keys needed????

..::Angel::.. · 11-02-2009, 09:33

Quote:

Originally Posted by g-gabber

Man, you post every where about SuperDongle Keys, BUT THIS IS FALSE, did you know what for Super Dongles Keys needed????

please give me some link may be I can learn something from you ? where I post FALSE info ? or tell me correct info too ,

g-gabber · 11-02-2009, 10:09

For example this http://forum.gsmhosting.com/vbb/show...26&postcount=3 .... the truth in inside flash file

..::Angel::.. · 11-02-2009, 10:32

Quote:

Originally Posted by g-gabber

For example this http://forum.gsmhosting.com/vbb/show...26&postcount=3 .... the truth in inside flash file

Hi,

the superdongel_key is a part of PM as I wrote in posts. About flash I wrote because, it was for PA_SL3 phones whic have versions above 50.xx.

was it wrong ? I don't think !

g-gabber · 11-02-2009, 10:37

"superdongel_key location is PM 1 and 309 I think" - superdongel_key stored in pm group 308 record 1 subblock 3 ...

GSMman187 · 11-02-2009, 10:44

Quote:

Originally Posted by oOXTCOo

yes, dm3 coder find hack technics where most ppl dont think there is possibility to hack anything...

at sl2 unlock:
nobody was thinking about patching loader!
and only the video on youtube showed the possiblity of f-bus loaders.
if this video not was posted at youtube you would still unlock per testpoint

but now he is smarter and learned from the past,
he dont shows anything even to us dm3 points. hehe

we see only the finished result

Yes damn youtube and bad the video was released.

..::Angel::.. · 11-02-2009, 11:23

Quote:

Originally Posted by g-gabber

"superdongel_key location is PM 1 and 309 I think" - superdongel_key stored in pm group 308 record 1 subblock 3 ...

Hi,

this is not new info. This is quite simple when we've 308 backup we can restore superdongel data, It is use for sx4 auth. About 1 and 309 it is for RF,Tunning,Battery callibration etc.. nothing new : )

About the link you give, It was posted in hurry, we can say it was wrong location : )

g-gabber · 11-02-2009, 13:46

You have list what for each sub block (section) is?

boucettay · 11-02-2009, 17:55

Quote:

Originally Posted by ..::Angel::..

Hi,

Can't we make solution from the finished result ? after get unlocked phone from DM3 ? It is little hard but not impossible : )

Regards, Ali

If so, it wil be possible too to make from unlocked pone by operator code...
It s notas easy as it seems
Read locked phone info / unlock / read unlocked phone infor/ compare

B-ph gave details in his post that shows that is not ....as simple

WBR,

boucettay · 11-02-2009, 18:03

Quote:

Originally Posted by oOXTCOo

yes, dm3 coder find hack technics where most ppl dont think there is possibility to hack anything...

at sl2 unlock:
nobody was thinking about patching loader!
and only the video on youtube showed the possiblity of f-bus loaders.
if this video not was posted at youtube you would still unlock per testpoint

but now he is smarter and learned from the past,
he dont shows anything even to us dm3 points. hehe

we see only the finished result

But Cinek was convinced that that can be done too....
It seems to me that I read that in a BPH&co post , that they gave cinek a Genie dongle .... to the end of story.

What I want to say is that Cinek was on the way for solution, even No YOUTUBE video solution was coming....
Perhaps not so fast...but was coming..

BTW, where is D.K in all this ??...i mean SL3

so speaking in the unlock language....clasify nokia Hackers : DM3 almos nokia sl2/sl3, Genie sl2 9dd, than others teams

bamogil · 11-02-2009, 19:01

for me i am convinced that dm3 have a nokia engeneer in their team or someone from nokia selling to them some secret.

zeus31 · 11-02-2009, 20:32

Quote:

Originally Posted by bamogil

for me i am convinced that dm3 have a nokia engeneer in their team or someone from nokia selling to them some secret.

Who knows for sure ? But at the end of the day it does not really matter how they do it, just be thankful for some kind of solution for the moment. DM3 and Network codes are better than nothing at all.

Hopefully Genie and others will catch up then the service will be available to all.

francoo · 11-02-2009, 21:03

announced the launch of the GENIE CLIP update with the latest security SL3 Nokia. I want to comment, that while Mr. Raskal not pay the amount of 289,000 euros which still owes me the market Nokia will be *** FREE *** to all users of our clip.

boxes will be available on Wednesday with all reseller worldwide.

sorry for Manola, FERNANDO DM3, but they must understand that such sums can not be at peace.

Supported models:
3600s RM-352
5310 RM-303
6300 RM-217
6500c RM-265
6500s RM-240
5730 XpressMusic
6216 Classic
6600i (RM-570)
E52 (RM-526)
N86 (RM-484, RM-485, RM-486)
N97 (RM-505, RM-506, RM-507)
6208c (RM-458)
6700c-1 (RM-470)
6303c (RM-443)
5630d (RM-431)
6720c (RM-424)

all versions supported.

BEST REGARDS
ZULEA.

oOXTCOo · 11-02-2009, 21:06

Quote:

Originally Posted by ..::Angel::..

Hi,

Can't we make solution from the finished result ? after get unlocked phone from DM3 ? It is little hard but not impossible : )

Regards, Ali

is same result when you buy unlock code and type it in...
now you can reverse engineer it...

no diffrences... 100% real unlock!

Bph&co · 11-02-2009, 21:09

Hi,

I can't be sure 100%, but i did some analysis on unlocked SL3 phones by DM3 and
to me it seems that he either have SX5 card connected to the server or access
to high level Salo account.

My original thought was that he is brute forcing the code, as it is no problem for
him to read the hashes from the phone. I also remembered our old conversation
that he gave me that idea for reading hashes and using powerful clusters to
bruteforce the code (back then was for dct4+).

But then i did simple tests on the data after DM3 unlock, results were:

1. Code entered by DM3 box is not the same as the Network will make, maybe
we can assume the SX5 SN is used as part of the calculation and the obvious
collision in the SL3 algo is not carelessness by Nokia but a feature to detect
who made the codes and probably blacklist SX5 codes in future firmware.
(if you remember dct4 codes, you will know what i am talking about)

2. The code DM3 box is calculating is not the first available one in the large
non-collision free keyspace, so bruteforce is maybe not what is used(Offcourse
he can just use different search algorithm)

Anyway all is assumptions because we don't have large enough data to
analyse.

Feel free to send me the last key of PM120 of unlocked phones by DM3 or
network codes, with large enough subset of data, all will be clear soon.

Regards, Alex
B-phreaks

11-02-2009, 21:03	#58 (permalink)
francoo Freak Poster Join Date: Jul 2004 Location: Chile Posts: 376 Member: 71290 Status: Offline Sonork: 100.1645657 Thanks Meter: 104	zulea announced the launch of the GENIE CLIP update with the latest security SL3 Nokia. I want to comment, that while Mr. Raskal not pay the amount of 289,000 euros which still owes me the market Nokia will be * FREE * to all users of our clip. boxes will be available on Wednesday with all reseller worldwide. sorry for Manola, FERNANDO DM3, but they must understand that such sums can not be at peace. Supported models: 3600s RM-352 5310 RM-303 6300 RM-217 6500c RM-265 6500s RM-240 5730 XpressMusic 6216 Classic 6600i (RM-570) E52 (RM-526) N86 (RM-484, RM-485, RM-486) N97 (RM-505, RM-506, RM-507) 6208c (RM-458) 6700c-1 (RM-470) 6303c (RM-443) 5630d (RM-431) 6720c (RM-424) all versions supported. BEST REGARDS ZULEA.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New ubbox dct4 unlock 15 credits???	Ramzan khan	Universalbox	1	01-07-2010 09:42
NOKIA SL3 Unlocking hopefully aspected by universal nowadays	sairat	Universalbox	11	07-19-2009 10:47
WHERE IS THE METHOD or VIDEO PROCEDURE TO UNLOCK ALL DCT4+ BY GENIE UNIVERSAL CLIP	Eagle7	Genie Universal	1	06-19-2009 21:37

11-02-2009, 09:28	#46 (permalink)
g-gabber No Life Poster Join Date: Oct 2005 Location: Yes Posts: 521 Member: 192652 Status: Offline Sonork: No Thanks Meter: 121	Man, you post every where about SuperDongle Keys, BUT THIS IS FALSE, did you know what for Super Dongles Keys needed????

11-02-2009, 10:09	#48 (permalink)
g-gabber No Life Poster Join Date: Oct 2005 Location: Yes Posts: 521 Member: 192652 Status: Offline Sonork: No Thanks Meter: 121	For example this http://forum.gsmhosting.com/vbb/show...26&postcount=3 .... the truth in inside flash file

11-02-2009, 10:37	#50 (permalink)
g-gabber No Life Poster Join Date: Oct 2005 Location: Yes Posts: 521 Member: 192652 Status: Offline Sonork: No Thanks Meter: 121	"superdongel_key location is PM 1 and 309 I think" - superdongel_key stored in pm group 308 record 1 subblock 3 ...

11-02-2009, 13:46	#53 (permalink)
g-gabber No Life Poster Join Date: Oct 2005 Location: Yes Posts: 521 Member: 192652 Status: Offline Sonork: No Thanks Meter: 121	You have list what for each sub block (section) is?

11-02-2009, 19:01	#56 (permalink)
bamogil No Life Poster Join Date: Mar 2006 Location: Message of William Branham Posts: 695 Member: 239523 Status: Offline Thanks Meter: 210	for me i am convinced that dm3 have a nokia engeneer in their team or someone from nokia selling to them some secret.

11-02-2009, 21:09	#60 (permalink)
Bph&co No Life Poster Join Date: Feb 2000 Location: UK Posts: 3,186 Member: 1024 Status: Offline Thanks Meter: 5,510	Hi, I can't be sure 100%, but i did some analysis on unlocked SL3 phones by DM3 and to me it seems that he either have SX5 card connected to the server or access to high level Salo account. My original thought was that he is brute forcing the code, as it is no problem for him to read the hashes from the phone. I also remembered our old conversation that he gave me that idea for reading hashes and using powerful clusters to bruteforce the code (back then was for dct4+). But then i did simple tests on the data after DM3 unlock, results were: 1. Code entered by DM3 box is not the same as the Network will make, maybe we can assume the SX5 SN is used as part of the calculation and the obvious collision in the SL3 algo is not carelessness by Nokia but a feature to detect who made the codes and probably blacklist SX5 codes in future firmware. (if you remember dct4 codes, you will know what i am talking about) 2. The code DM3 box is calculating is not the first available one in the large non-collision free keyspace, so bruteforce is maybe not what is used(Offcourse he can just use different search algorithm) Anyway all is assumptions because we don't have large enough data to analyse. Feel free to send me the last key of PM120 of unlocked phones by DM3 or network codes, with large enough subset of data, all will be clear soon. Regards, Alex B-phreaks