Box is Not IN Needed Mod.How To Solve? - Page 3 - GSM-Forum

NADEEM GONDAL · 10-04-2009, 07:58

Quote:

Originally Posted by SAHEB

hi supporter pls solve this,:::Initializing security card...
Security Card Reset Error -> Possible error: Unknown error 0x4E
Initialization has failed -> Security card was not found!""
i always get this error.when try for 10-15 times its start sometime.sometime after get info from the phone when try to flash suddenly it gives this error.i follow all instruction.now im tired with this box.i dont understand where is problem.so pls give me some accurate guideline to solve this problem.
anyway thanx.
br:shabbir-cellcare.

Check Your USB Cable Or Change It.
http://forum.gsmhosting.com/vbb/show...=Security+card

nicacel · 10-04-2009, 22:31

I think my box is damaged

Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.7918
Handling device: [Cyclone Team], [Cyclone Bootloader]
Initialization has failed -> No connection was established, or box is not in needed mode

Box was working great unlocking many nokia, now box cant even goes in boot mode, only in bootloader, I tried in different computer, I changed USB cable, I changed USB port, I did everything box cant go in boot mode, computer cant detect box, I checked in Hardware/device manager/ only bootloader..

After I click in DCT4 tab, box turn off that's all.\

Please help !!

ptt · 10-04-2009, 23:25

@ Nicacel

Contact Mr. Siroya in Sonork : 100.58402 or ICQ : 176266002

BR

deywet · 10-06-2009, 09:38

cyclone always Initialization has failed -> No connection was established, or box is not in needed mode

ive done the procedures,, uninstall reinstall after that it will work,, the window will say in " main mode" then i unplug my box after a few minutes i plug it again den the window will say in bootloader mode,, again it won't connect,,, how is that,, where is the problem is it in the box,,

and one thing do i have to always plug the ac adaptor everytime i use the cyclone

nowarno · 10-08-2009, 19:03

link is broken, please upload again

Quote:

Originally Posted by NADEEM GONDAL

Little Guide For new User.

Download Main Instaler
Download Mirror 0 : http://rapidshare.com/files/22831354...xInstaller.exe (TRAFFIC SHARE Download - download without logging into Rapidshare Premium zone, free - no wait and limits)
Download Mirror 1 : http://www.***************/downloads/...xInstaller.exe
After this
download the last update from here
http://rapidshare.com/files/24744090...one7828NCK.rar
And unzip all the files in the Cyclone folder (Normally c:\program files\Cyclone box) answering yes when asked to overwrite.

Conect your Box It will ask you For Driver

Install these Driver

After this now open cyclone Box From desktop Shortcut

Click DCT4/WD2/BB5

After this you need to Install Cyclone Box Driver
Other wise You Will See

After instaling These Driver

After These Steps You Can Use Your Box As Normal

If you Still Facing Any Problem The Cyclone Team And Other Expert Member Are Always Here For Your Help

Regards
Nadeem Gondal

mr khalid · 10-26-2009, 20:27

hello me too today after update box i get box not in needed mode error, i update it 3 time but the same problem, also i change pc, usb, reinstall program, any help.

note: i get the same problem for ferst time i get my box, i correct it my self by hardware modification, but now i get the problem but the solution not work this time.

need help
Br

ptt · 10-26-2009, 20:37

@ mr khalid

You get this error because the First update fail.

When you update your box 2 updates are preformed : Security Area & Main Firmware

if there is a minor error in any of the 2 updates, you get an error....

The only way to solve this, is SEND PM to CYCLONEBOX, HONEY or SIROYA with your Box S/N an a description of your problem.

Otherwise you can try to udate your BOX 10000000000000000000 times and allways get an error..... so SEND PM and solve your problem....

mr khalid · 10-27-2009, 12:44

Quote:

Originally Posted by ptt

@ mr khalid

You get this error because the First update fail.

When you update your box 2 updates are preformed : Security Area & Main Firmware

if there is a minor error in any of the 2 updates, you get an error....

The only way to solve this, is SEND PM to CYCLONEBOX, HONEY or SIROYA with your Box S/N an a description of your problem.

Otherwise you can try to udate your BOX 10000000000000000000 times and allways get an error..... so SEND PM and solve your problem....

thanks sir i tray to pm siroya cyclone and hony if some off them connect.

great thanks to you.

Br

vampire13 · 10-27-2009, 13:02

I have this problem after update
First Name: Indra
Surname: Gunawan
Nickname: Vampire13
Address: Jambi
Country: Indonesia
E-Mail: [email protected]
Reseller: SCPgsm, Indonesia
Warranty Start Date: 2009-07-13
Warranty Period (months): 6
Warranty Stop Date: 2010-01-13
Warranty active: Yes
============================
Updating Security Area...
Security Area Update Skipped, Not allowed
Updating Main Firmware...
Main Firmware Update Skipped, Not allowed
Disconnected from Cyclone Server
Box Maintenance finished successfully

but not work when
Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.7396
Handling device: [Cyclone Team], [Cyclone Bootloader]
Initialization has failed -> No connection was established, or box is not in needed mode

Many thanks

Borys___ · 10-27-2009, 14:34

Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.7918
Handling device: [Cyclone Team], [Cyclone Bootloader]
Initialization has failed -> No connection was established, or box is not in needed mode

Same problem beguile

BR

acessoriosecia · 10-27-2009, 18:29

Quote:

Originally Posted by NADEEM GONDAL

Little Guide For new User.
Download Main Instaler
Download Mirror 0 : http://rapidshare.com/files/22831354...xInstaller.exe (TRAFFIC SHARE Download - download without logging into Rapidshare Premium zone, free - no wait and limits)
Download Mirror 1 : http://www.***************/downloads/...xInstaller.exe
After this
download the last update from here
http://rapidshare.com/files/24744090...one7828NCK.rar
And unzip all the files in the Cyclone folder (Normally c:\program files\Cyclone box) answering yes when asked to overwrite.

Conect your Box It will ask you For Driver

Install these Driver

After this now open cyclone Box From desktop Shortcut

Click DCT4/WD2/BB5

After this you need to Install Cyclone Box Driver
Other wise You Will See

After instaling These Driver

After These Steps You Can Use Your Box As Normal

If you Still Facing Any Problem The Cyclone Team And Other Expert Member Are Always Here For Your Help

Regards
Nadeem Gondal

my box is not asking for the drive cyclone box only drive cyclone bootloader.
DCT4 when I click it all the lights and lock LEDs

acessoriosecia · 10-27-2009, 18:30

my box is not asking for the drive cyclone box only drive cyclone bootloader.
DCT4 when I click it all the lights and lock LEDs

mr khalid · 10-27-2009, 20:01

I connect Mr Siroya and they tell me to update box again, so I do, but same problem, please give a real solution,.

Br

parengBok · 10-28-2009, 03:22

Quote:

Originally Posted by mr khalid

I connect Mr Siroya and they tell me to update box again, so I do, but same problem, please give a real solution,.

Br

perhaps this call must be brought to
the attention of the whole CYCLONE BOX team......

ive already done the same... ( w/c is to pm
siroya) likewise i got same reply from him...
He told me to update the box again..
but still no luck...

this scenario has a striking resemblance to what had
happen to my JAF box...
(there was one update released by jaf team
that spelled the doom of my box)..
same scene that happen with my cyclone box..
after update, the box couldnt no longer be
brought to main mode...

but im still looking forward for Cyclone Team
to do the fixing with this mess ( pardon me )..

a mess indeed for without cyclone box
repairing is somewhat impaired...

so PLEASE!! we need SOLUTION!! ASAP......

karwos · 10-28-2009, 16:21

http://forum.gsmhosting.com/vbb/show...34#post4979234

Here is solution.
Upgrade your boxes.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
problem with my cyclone box.box is not in needed mode	samih127	Cyclonebox	18	06-12-2010 06:05
Box is not in needed mode [SOLVED]	renren	Cyclonebox	2	01-19-2010 22:38
::solve:: box is not in needed mode	mr khalid	Cyclonebox	6	09-15-2009 08:36
Cyclone team (not connected) box is not in needed mode	tims	Cyclonebox	17	06-29-2009 03:54
Box is not in needed mode.	masterunlock	Cyclonebox	5	03-24-2009 16:44

10-04-2009, 22:31	#32 (permalink)
nicacel No Life Poster Join Date: Jan 2005 Location: Land of Lakes and Volcanoes Age: 51 Posts: 1,233 Member: 111014 Status: Offline Thanks Meter: 132	I think my box is damaged Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.7918 Handling device: [Cyclone Team], [Cyclone Bootloader] Initialization has failed -> No connection was established, or box is not in needed mode Box was working great unlocking many nokia, now box cant even goes in boot mode, only in bootloader, I tried in different computer, I changed USB cable, I changed USB port, I did everything box cant go in boot mode, computer cant detect box, I checked in Hardware/device manager/ only bootloader.. After I click in DCT4 tab, box turn off that's all.\ Please help !!

10-04-2009, 23:25	#33 (permalink)
ptt No Life Poster Join Date: Sep 2006 Location: RETIRED ! Age: 47 Posts: 3,327 Member: 348680 Status: Offline Thanks Meter: 1,273	@ Nicacel Contact Mr. Siroya in Sonork : 100.58402 or ICQ : 176266002 BR

10-06-2009, 09:38	#34 (permalink)
deywet Freak Poster Join Date: Oct 2007 Location: philippines Posts: 182 Member: 603921 Status: Offline Thanks Meter: 71	cyclone always Initialization has failed -> No connection was established, or box is not in needed mode ive done the procedures,, uninstall reinstall after that it will work,, the window will say in " main mode" then i unplug my box after a few minutes i plug it again den the window will say in bootloader mode,, again it won't connect,,, how is that,, where is the problem is it in the box,, and one thing do i have to always plug the ac adaptor everytime i use the cyclone

10-26-2009, 20:27	#36 (permalink)
mr khalid Freak Poster Join Date: Nov 2006 Location: morocco Age: 35 Posts: 401 Member: 389669 Status: Offline Sonork: 100.1583354 Thanks Meter: 226	hello me too today after update box i get box not in needed mode error, i update it 3 time but the same problem, also i change pc, usb, reinstall program, any help. note: i get the same problem for ferst time i get my box, i correct it my self by hardware modification, but now i get the problem but the solution not work this time. need help Br

10-26-2009, 20:37	#37 (permalink)
ptt No Life Poster Join Date: Sep 2006 Location: RETIRED ! Age: 47 Posts: 3,327 Member: 348680 Status: Offline Thanks Meter: 1,273	@ mr khalid You get this error because the First update fail. When you update your box 2 updates are preformed : Security Area & Main Firmware if there is a minor error in any of the 2 updates, you get an error.... The only way to solve this, is SEND PM to CYCLONEBOX, HONEY or SIROYA with your Box S/N an a description of your problem. Otherwise you can try to udate your BOX 10000000000000000000 times and allways get an error..... so SEND PM and solve your problem....

10-27-2009, 13:02	#39 (permalink)
vampire13 No Life Poster Join Date: Mar 2006 Location: Indonesia(Jambi) Posts: 851 Member: 246444 Status: Offline Thanks Meter: 124	I have this problem after update First Name: Indra Surname: Gunawan Nickname: Vampire13 Address: Jambi Country: Indonesia E-Mail: [email protected] Reseller: SCPgsm, Indonesia Warranty Start Date: 2009-07-13 Warranty Period (months): 6 Warranty Stop Date: 2010-01-13 Warranty active: Yes ============================ Updating Security Area... Security Area Update Skipped, Not allowed Updating Main Firmware... Main Firmware Update Skipped, Not allowed Disconnected from Cyclone Server Box Maintenance finished successfully but not work when Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.7396 Handling device: [Cyclone Team], [Cyclone Bootloader] Initialization has failed -> No connection was established, or box is not in needed mode Many thanks

10-27-2009, 14:34	#40 (permalink)
Borys___ Junior Member Join Date: Sep 2005 Age: 44 Posts: 4 Member: 182681 Status: Offline Thanks Meter: 0	Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.7918 Handling device: [Cyclone Team], [Cyclone Bootloader] Initialization has failed -> No connection was established, or box is not in needed mode Same problem beguile BR

10-27-2009, 18:30	#42 (permalink)
acessoriosecia Junior Member Join Date: Jan 2008 Posts: 28 Member: 691872 Status: Offline Thanks Meter: 9	my box is not asking for the drive cyclone box only drive cyclone bootloader. DCT4 when I click it all the lights and lock LEDs

10-27-2009, 20:01	#43 (permalink)
mr khalid Freak Poster Join Date: Nov 2006 Location: morocco Age: 35 Posts: 401 Member: 389669 Status: Offline Sonork: 100.1583354 Thanks Meter: 226	I connect Mr Siroya and they tell me to update box again, so I do, but same problem, please give a real solution,. Br

10-28-2009, 16:21	#45 (permalink)
karwos No Life Poster Join Date: Feb 2005 Location: Poland Age: 34 Posts: 4,943 Member: 117496 Status: Offline Sonork: 100.83919 Thanks Meter: 22,689	http://forum.gsmhosting.com/vbb/show...34#post4979234 Here is solution. Upgrade your boxes.