Box Selftests Fail, What to do.... - Page 2 - GSM-Forum

ayhen42 · 09-06-2009, 03:22

hello ptt here my problem
Started box selftests procedure
USB Voltage 5.16v PASSED
MCU Voltage 3.29v PASSED
Core Voltage 1.84v PASSED
VBAT Voltage 0.01v PASSED
VBAT Voltage 5.12v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
Internal Box VPP Enabled
VPP Voltage 5.01v PASSED
Box VPP disabled
VPP Voltage 0.02v PASSED
External Box VPP Enabled
VPP Voltage 0.02v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Initializing FBUS...
All initialized - Ready to work

ptt · 09-06-2009, 03:26

There is no problem with your box, all is ok

Code:

VPP Voltage 0.02v FAILED - IGNORED - Probably power supply is not connected

this error is because you have not conected the ext VPP power supply ( read the first post of this thread )

BR

Pufi164 · 09-09-2009, 13:44

I obtained it today the box (LM3526H)

But no external VPP!

This with external stable 5V:

Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 4.99v PASSED
MCU Voltage 3.29v PASSED
Core Voltage 1.77v PASSED
VBAT Voltage 0.01v PASSED
VBAT Voltage 4.96v PASSED
Box VPP disabled
VPP Voltage 0.47v PASSED
Internal Box VPP Enabled
VPP Voltage 4.92v PASSED
Box VPP disabled
VPP Voltage 0.47v PASSED
External Box VPP Enabled
VPP Voltage 1.43v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Initializing FBUS...
All initialized - Ready to work

This without external power:

Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 4.98v PASSED
MCU Voltage 3.28v PASSED
Core Voltage 1.77v PASSED
VBAT Voltage 0.01v PASSED
VBAT Voltage 4.96v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
Internal Box VPP Enabled
VPP Voltage 4.90v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
External Box VPP Enabled
VPP Voltage 0.04v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Initializing FBUS...
All initialized - Ready to work

What shall I do now?

Pufi164 · 09-09-2009, 16:55

Hy.

Without externaé power write:
External Box VPP Enabled
VPP Voltage 0.04v FAILED - IGNORED - Probably power supply is not connected

With 5V external power:
External Box VPP Enabled
VPP Voltage 1.43v FAILED - IGNORED - Probably power supply is not connected

With 9V external power:
xternal Box VPP Enabled
VPP Voltage 1.52v FAILED - IGNORED - Probably power supply is not connected.

Help someone who has it.
A completely new box!

ptt · 09-09-2009, 22:46

@ Pufi164

Did you read this stiky thread ?

http://forum.gsmhosting.com/vbb/showthread.php?t=798297

If you conect 9V Power Supply to your box ( New HW Rev. with LM3526H ) you KILL your VPP Switch IC ( LM3526H )

You ONLY can use 9V in old HW Rev, that use LM1950T or CS8240

Now you only can use INT VPP ( this is not a problem with new HW Rev. Box as with EXT VPP you can use only 5V and this is the same VPP voltage that INT VPP use ).

Maybe you can exchange the box with your reseller, and nex time dont play with VPP....

BR

Pufi164 · 09-10-2009, 14:21

THX.
Now I have already read.
Unfortunately, my new HW with LM3526H.

But work fine wihout external VPP.

rather buy 2 pieces LM3526H, nd exchange on (if it helps)
Ip-mart since it was purchased, it would be easy to send from Europe to China....

It would be the question of whether it makes sense to fix?
Is there any downside?

ptt · 09-10-2009, 21:49

@ Pufi164

If your Box works properly, and you can flash.... ( try some model that can use VPP some DCT-4 ) i dont see any reason to touch anything...

here an easy way to check VPP

http://forum.gsmhosting.com/vbb/show...27&postcount=9

BR

senkron24 · 09-12-2009, 11:35

Quote:

Originally Posted by ptt

I think there is at least 3 diferent HW versions, the first with LM1950T ( i have this ), the second with CS8240, and the third with LM3526H.... i cant say which is better as i only have 1....

If you dont have the skill to do the tests posted, then better contact reseller, or Mr. Cyclonebox ( see this post )

http://forum.gsmhosting.com/vbb/show...2&postcount=25

BR

in my devacie is lm3940is

is other hw

adnanali · 09-12-2009, 11:58

check this just registration complete and i face this my 1st cyclone is ok on same pc & cable

ptt · 09-12-2009, 12:15

@ senkron24

Yes, your Cyclone and all other uses LM3940, it is an 1A Low Dropout Regulator for 5V to 3.3V Conversion, for MCU power supply... and LM1950T, CS8240, and LM3526H are used for VBAT an VPP voltage switch, those IC are the cause of most Selftest Fail warnings...

BR

ptt · 09-12-2009, 12:19

@ adnanali

you get "VBAT Voltage fail" ?

read the first post of this thread, where say: " 3- VBAT Supply test fail "

BR

senkron24 · 09-12-2009, 13:37

Quote:

Originally Posted by ptt

@ senkron24

Yes, your Cyclone and all other uses LM3940, it is an 1A Low Dropout Regulator for 5V to 3.3V Conversion, for MCU power supply... and LM1950T, CS8240, and LM3526H are used for VBAT an VPP voltage switch, those IC are the cause of most Selftest Fail warnings...

BR

i have samtimes problem with pic adanali

Box Selftests Failed -> VPP Supply Voltage test failed, 0,60v is out of valid range

and same times work great

Card is activated
Box is activated
Started box selftests procedure
USB Voltage 5,03v PASSED
MCU Voltage 3,27v PASSED
Core Voltage 1,76v PASSED
VBAT Voltage 0,01v PASSED
VBAT Voltage 4,92v PASSED
Box VPP disabled
VPP Voltage 0,04v PASSED
Internal Box VPP Enabled
VPP Voltage 4,88v PASSED
Box VPP disabled
VPP Voltage 0,04v PASSED
External Box VPP Enabled
VPP Voltage 0,04v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
Initializing FBUS...
All initialized - Ready to work

muss i change lm3940 ???

b.r
senkron24

ptt · 09-12-2009, 13:48

Resolder VBAT switch IC ( LM1950T, CS8240 or LM3526H ) if your box have LM1950T the VBAT IC is the ones located behind diagnostioc port (RJ-48)

If LM3940 fail, yor box dont work at all (dead box)

BR

hackgsm · 09-12-2009, 21:08

Quote:

Originally Posted by senkron24

in my devacie is lm3940is

is other hw

lm3940is is regulator 3.3v for atmel chip......old and new cyclone box

q_ilabo_t · 09-14-2009, 10:59

Started box selftests procedure
USB Voltage 5.02v PASSED
MCU Voltage 3.30v PASSED
Core Voltage 1.76v PASSED
VBAT Voltage 0.01v PASSED
Box Selftests Failed -> VBAT Supply Voltage test failed, 3.01v is out of valid range
Super DCT4 Activation: FALSE
Initializing FBUS...
All initialized - Ready to work

09-06-2009, 03:26	#17 (permalink)
ptt No Life Poster Join Date: Sep 2006 Location: RETIRED ! Age: 47 Posts: 3,327 Member: 348680 Status: Offline Thanks Meter: 1,273	There is no problem with your box, all is ok Code: VPP Voltage 0.02v FAILED - IGNORED - Probably power supply is not connected this error is because you have not conected the ext VPP power supply ( read the first post of this thread ) BR

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Box Selftests Failed -> VBAT Supply Voltage test failed, 4.17v is out of valid range	kosta25	Cyclonebox	2	11-04-2009 13:40
Box Selftests Failed -> VBAT Supply Voltage test failed, 4.08v is out of valid range	azad4u	Cyclonebox	7	07-08-2009 14:48
just got box, dont know what to do	masterunlocking	VygisToolbox	2	11-11-2007 17:36
6280 flashing failed! what to do?	rakhpai	Universalbox	2	08-10-2006 18:33

09-06-2009, 03:22	#16 (permalink)
ayhen42 No Life Poster Join Date: Aug 2007 Location: Midle of the Earth Posts: 2,323 Member: 575851 Status: Offline Thanks Meter: 544	hello ptt here my problem Started box selftests procedure USB Voltage 5.16v PASSED MCU Voltage 3.29v PASSED Core Voltage 1.84v PASSED VBAT Voltage 0.01v PASSED VBAT Voltage 5.12v PASSED Box VPP disabled VPP Voltage 0.04v PASSED Internal Box VPP Enabled VPP Voltage 5.01v PASSED Box VPP disabled VPP Voltage 0.02v PASSED External Box VPP Enabled VPP Voltage 0.02v FAILED - IGNORED - Probably power supply is not connected Box VPP disabled All box selftests passed! Initializing FBUS... All initialized - Ready to work

09-09-2009, 13:44	#18 (permalink)
Pufi164 No Life Poster Join Date: Oct 2004 Location: Budapest Age: 54 Posts: 1,937 Member: 87188 Status: Offline Thanks Meter: 227	I obtained it today the box (LM3526H) But no external VPP! This with external stable 5V: Card Firmware Revision: 0109 Card is activated Box is activated Started box selftests procedure USB Voltage 4.99v PASSED MCU Voltage 3.29v PASSED Core Voltage 1.77v PASSED VBAT Voltage 0.01v PASSED VBAT Voltage 4.96v PASSED Box VPP disabled VPP Voltage 0.47v PASSED Internal Box VPP Enabled VPP Voltage 4.92v PASSED Box VPP disabled VPP Voltage 0.47v PASSED External Box VPP Enabled VPP Voltage 1.43v FAILED - IGNORED - Probably power supply is not connected Box VPP disabled All box selftests passed! Initializing FBUS... All initialized - Ready to work This without external power: Card Firmware Revision: 0109 Card is activated Box is activated Started box selftests procedure USB Voltage 4.98v PASSED MCU Voltage 3.28v PASSED Core Voltage 1.77v PASSED VBAT Voltage 0.01v PASSED VBAT Voltage 4.96v PASSED Box VPP disabled VPP Voltage 0.04v PASSED Internal Box VPP Enabled VPP Voltage 4.90v PASSED Box VPP disabled VPP Voltage 0.04v PASSED External Box VPP Enabled VPP Voltage 0.04v FAILED - IGNORED - Probably power supply is not connected Box VPP disabled All box selftests passed! Initializing FBUS... All initialized - Ready to work What shall I do now?

09-09-2009, 16:55	#19 (permalink)
Pufi164 No Life Poster Join Date: Oct 2004 Location: Budapest Age: 54 Posts: 1,937 Member: 87188 Status: Offline Thanks Meter: 227	Hy. Without externaé power write: External Box VPP Enabled VPP Voltage 0.04v FAILED - IGNORED - Probably power supply is not connected With 5V external power: External Box VPP Enabled VPP Voltage 1.43v FAILED - IGNORED - Probably power supply is not connected With 9V external power: xternal Box VPP Enabled VPP Voltage 1.52v FAILED - IGNORED - Probably power supply is not connected. Help someone who has it. A completely new box!

09-09-2009, 22:46	#20 (permalink)
ptt No Life Poster Join Date: Sep 2006 Location: RETIRED ! Age: 47 Posts: 3,327 Member: 348680 Status: Offline Thanks Meter: 1,273	@ Pufi164 Did you read this stiky thread ? http://forum.gsmhosting.com/vbb/showthread.php?t=798297 If you conect 9V Power Supply to your box ( New HW Rev. with LM3526H ) you KILL your VPP Switch IC ( LM3526H ) You ONLY can use 9V in old HW Rev, that use LM1950T or CS8240 Now you only can use INT VPP ( this is not a problem with new HW Rev. Box as with EXT VPP you can use only 5V and this is the same VPP voltage that INT VPP use ). Maybe you can exchange the box with your reseller, and nex time dont play with VPP.... BR

09-10-2009, 14:21	#21 (permalink)
Pufi164 No Life Poster Join Date: Oct 2004 Location: Budapest Age: 54 Posts: 1,937 Member: 87188 Status: Offline Thanks Meter: 227	THX. Now I have already read. Unfortunately, my new HW with LM3526H. But work fine wihout external VPP. rather buy 2 pieces LM3526H, nd exchange on (if it helps) Ip-mart since it was purchased, it would be easy to send from Europe to China.... It would be the question of whether it makes sense to fix? Is there any downside?

09-10-2009, 21:49	#22 (permalink)
ptt No Life Poster Join Date: Sep 2006 Location: RETIRED ! Age: 47 Posts: 3,327 Member: 348680 Status: Offline Thanks Meter: 1,273	@ Pufi164 If your Box works properly, and you can flash.... ( try some model that can use VPP some DCT-4 ) i dont see any reason to touch anything... here an easy way to check VPP http://forum.gsmhosting.com/vbb/show...27&postcount=9 BR

09-12-2009, 11:58	#24 (permalink)
adnanali No Life Poster Join Date: Dec 2005 Location: Gujjar AJK Posts: 2,074 Member: 207308 Status: Offline Thanks Meter: 471	check this just registration complete and i face this my 1st cyclone is ok on same pc & cable

09-12-2009, 12:15	#25 (permalink)
ptt No Life Poster Join Date: Sep 2006 Location: RETIRED ! Age: 47 Posts: 3,327 Member: 348680 Status: Offline Thanks Meter: 1,273	@ senkron24 Yes, your Cyclone and all other uses LM3940, it is an 1A Low Dropout Regulator for 5V to 3.3V Conversion, for MCU power supply... and LM1950T, CS8240, and LM3526H are used for VBAT an VPP voltage switch, those IC are the cause of most Selftest Fail warnings... BR

09-12-2009, 12:19	#26 (permalink)
ptt No Life Poster Join Date: Sep 2006 Location: RETIRED ! Age: 47 Posts: 3,327 Member: 348680 Status: Offline Thanks Meter: 1,273	@ adnanali you get "VBAT Voltage fail" ? read the first post of this thread, where say: " 3- VBAT Supply test fail " BR

09-12-2009, 13:48	#28 (permalink)
ptt No Life Poster Join Date: Sep 2006 Location: RETIRED ! Age: 47 Posts: 3,327 Member: 348680 Status: Offline Thanks Meter: 1,273	Resolder VBAT switch IC ( LM1950T, CS8240 or LM3526H ) if your box have LM1950T the VBAT IC is the ones located behind diagnostioc port (RJ-48) If LM3940 fail, yor box dont work at all (dead box) BR

09-14-2009, 10:59	#30 (permalink)
q_ilabo_t Insane Poster Join Date: Apr 2008 Posts: 79 Member: 760908 Status: Offline Thanks Meter: 5	Started box selftests procedure USB Voltage 5.02v PASSED MCU Voltage 3.30v PASSED Core Voltage 1.76v PASSED VBAT Voltage 0.01v PASSED Box Selftests Failed -> VBAT Supply Voltage test failed, 3.01v is out of valid range Super DCT4 Activation: FALSE Initializing FBUS... All initialized - Ready to work