*** Cyclone Box Pinouts *** - GSM-Forum

karwos · 03-23-2009, 11:29

SERVICE socket
(10 pin layout)
1 - BOX GENIO1
2 - VBAT (5v)
3 - BOX GENIO2 (TX2)
4 - BSI
5 - BOX RX_1
6 - BOX TX_1
7 - MBUS
8 - GND
9 - VPP
10 - BOX GENIO3

As you can see, pinout is compatible with UFS/JAF and other common Nokia boxes. For DCT4 you can plug directly UFS/JAF cables without any adapter. With BB5, most 8-pin market cables have TX2 instead VPP Pin. Our box don't have connected data line to VPP - only to power IC.
Tx2 might be changed ON THE FLY to any of GENIO pins (in further updated maybe also possible 100% flexible pinout modification, so ALL cables on markets will be supported!).
Bundled adapter crossing pin 3 with 9. That means on output from adapter, on pin 8 you will have TX2 (service pin 3) and still compatibility with UFS/JAF cables will be. VPP is not cutted. It's on pin nr 3 (unused pin nr 2 - jaf/ufs cables) so still VPP funcionality can be used on 8 pin cables, instead of purchasing 10 pin! With small mods needed, of course.
You can use too native 10pin Cyclone cables, but they are not avaiable on market at moment.

DIAGNOSTIC socket
1 - VBAT (5v)
2 - USART CLK
3 - USART TXD
4 - FREQ_MEASURMENT_A0
5 - FREQ_MEASURMENT_CLK
6 - DIAG_1_VOLTMETER
7 - DIAG_2_VOLTMETER
8 - DIAG_3_VOLTMETER
9 - USART RXD
10 - GND

Will be used soon.

Umair Rashid · 03-24-2009, 07:26

could ufs cables be used with cyclonebox?

vipishe · 03-24-2009, 17:53

Quote:

Originally Posted by umairrashid1

could ufs cables be used with cyclonebox?

Yes UFS/JAF cables. etc...

aswancamel · 03-24-2009, 18:21

please, tell me,
1 pack cyclone include cable or not.
(or just sell box or icluded box + cable)

unlocknas · 03-24-2009, 18:24

which one is best for flash and unlock jafbox or universal box ufs cyclone.

vipishe · 03-24-2009, 18:37

Quote:

Originally Posted by aswancamel

please, tell me,
1 pack cyclone include cable or not.
(or just sell box or icluded box + cable)

No cables included, only Box+adapter.

vipishe · 03-24-2009, 18:39

Quote:

Originally Posted by unlocknas

which one is best for flash and unlock jafbox or universal box ufs cyclone.

MT-Box + JAF. the best together.

aswancamel · 03-24-2009, 18:47

cyclone box has a good feature
so, where we get SERVICE socket and DIAGNOSTIC socket.
or make own self, or from another flasher like mt-box.

thanks advance

vipishe · 03-24-2009, 18:52

Quote:

Originally Posted by aswancamel

cyclone box has a good feature
so, where we get SERVICE socket and DIAGNOSTIC socket.
or make own self, or from another flasher like mt-box.

thanks advance

On the Cyclone box already built in two sockets: SERVICE socket and DIAGNOSTIC socket

aswancamel · 03-24-2009, 18:55

sorry brother, misswriting
where can i get the cables for service cable and DIAGNOSTIC cable?
make own self cable , or i can get from mt box cable

karwos · 03-24-2009, 19:35

Quote:

Originally Posted by aswancamel

please, tell me,
1 pack cyclone include cable or not.
(or just sell box or icluded box + cable)

Box + BB5 adapter to use with native jaf/ufs cables. And credits.Sorry, for 99€ cant give more.

karwos · 03-24-2009, 19:35

Quote:

Originally Posted by unlocknas

which one is best for flash and unlock jafbox or universal box ufs cyclone.

Each device have its advantages and disadvantages.

karwos · 03-24-2009, 19:36

Quote:

Originally Posted by aswancamel

sorry brother, misswriting
where can i get the cables for service cable and DIAGNOSTIC cable?
make own self cable , or i can get from mt box cable

When SW for diag socket will be ready, schematics will be posted of course, and ready special diag cables wil be for sale too.

ohdie · 03-31-2009, 03:16

hello does using a universal cable to this box.need adapter still? or could be connected directly?thanks

kikikokoki · 03-31-2009, 03:30

good team.................................

03-23-2009, 11:29	#1 (permalink)
karwos No Life Poster Join Date: Feb 2005 Location: Poland Age: 33 Posts: 4,943 Member: 117496 Status: Offline Sonork: 100.83919 Thanks Meter: 22,689	* Cyclone Box Pinouts * SERVICE socket (10 pin layout) 1 - BOX GENIO1 2 - VBAT (5v) 3 - BOX GENIO2 (TX2) 4 - BSI 5 - BOX RX_1 6 - BOX TX_1 7 - MBUS 8 - GND 9 - VPP 10 - BOX GENIO3 As you can see, pinout is compatible with UFS/JAF and other common Nokia boxes. For DCT4 you can plug directly UFS/JAF cables without any adapter. With BB5, most 8-pin market cables have TX2 instead VPP Pin. Our box don't have connected data line to VPP - only to power IC. Tx2 might be changed ON THE FLY to any of GENIO pins (in further updated maybe also possible 100% flexible pinout modification, so ALL cables on markets will be supported!). Bundled adapter crossing pin 3 with 9. That means on output from adapter, on pin 8 you will have TX2 (service pin 3) and still compatibility with UFS/JAF cables will be. VPP is not cutted. It's on pin nr 3 (unused pin nr 2 - jaf/ufs cables) so still VPP funcionality can be used on 8 pin cables, instead of purchasing 10 pin! With small mods needed, of course. You can use too native 10pin Cyclone cables, but they are not avaiable on market at moment. DIAGNOSTIC socket 1 - VBAT (5v) 2 - USART CLK 3 - USART TXD 4 - FREQ_MEASURMENT_A0 5 - FREQ_MEASURMENT_CLK 6 - DIAG_1_VOLTMETER 7 - DIAG_2_VOLTMETER 8 - DIAG_3_VOLTMETER 9 - USART RXD 10 - GND Will be used soon. Last edited by karwos; 08-26-2009 at 19:25.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
cyclone box can't change to main mode [SOLVED - Thanks HRCO]	banalven1	Cyclonebox	5	03-29-2010 09:34
cyclone box what is this error? cyclone create rpl in n96 failed?	"KINO"	Cyclonebox	3	09-05-2009 07:14
cyclone team mocks MXkey...cyclone box is UNcrackeable	residentdenuevo	MXKEY Nokia Flasher and Unlocker (by Alim Hape)	7	08-15-2009 09:15
Cyclone team.. CYclone Box No support Nokia 1112 rh92 SW 6.46	residentdenuevo	Cyclonebox	8	07-08-2009 13:04
cyclone Team Need Update ... please read and Update Cyclone Box	residentdenuevo	Cyclonebox	15	06-08-2009 18:41

03-24-2009, 07:26	#2 (permalink)
Umair Rashid No Life Poster Join Date: Dec 2006 Location: Rawalpindi, Pakistan Posts: 2,292 Member: 421117 Status: Offline Sonork: +92 346 5544377 (PHONE) Thanks Meter: 2,522	could ufs cables be used with cyclonebox?

03-24-2009, 18:21	#4 (permalink)
aswancamel No Life Poster Join Date: Jun 2006 Posts: 1,121 Member: 303402 Status: Offline Thanks Meter: 346	please, tell me, 1 pack cyclone include cable or not. (or just sell box or icluded box + cable)

03-24-2009, 18:24	#5 (permalink)
unlocknas Freak Poster Join Date: Nov 2006 Posts: 460 Member: 391805 Status: Offline Thanks Meter: 29	which one is best for flash and unlock jafbox or universal box ufs cyclone.

03-24-2009, 18:47	#8 (permalink)
aswancamel No Life Poster Join Date: Jun 2006 Posts: 1,121 Member: 303402 Status: Offline Thanks Meter: 346	cyclone box has a good feature so, where we get SERVICE socket and DIAGNOSTIC socket. or make own self, or from another flasher like mt-box. thanks advance

03-24-2009, 18:55	#10 (permalink)
aswancamel No Life Poster Join Date: Jun 2006 Posts: 1,121 Member: 303402 Status: Offline Thanks Meter: 346	sorry brother, misswriting where can i get the cables for service cable and DIAGNOSTIC cable? make own self cable , or i can get from mt box cable

03-31-2009, 03:16	#14 (permalink)
ohdie Freak Poster Join Date: Apr 2007 Location: land of no return Posts: 184 Member: 486967 Status: Offline Sonork: none Thanks Meter: 17	hello does using a universal cable to this box.need adapter still? or could be connected directly?thanks

03-31-2009, 03:30	#15 (permalink)
kikikokoki No Life Poster Join Date: Apr 2008 Location: GSM Philippines Age: 37 Posts: 955 Member: 748785 Status: Offline Sonork: KIKO_GSM Thanks Meter: 309	good team.................................