Cyclone NO TP - USB ONLY Rooting for Lumia 800, 800C Released ;) - Page 6 - GSM-Forum

karwos · 08-07-2013, 09:01

Quote:

Originally Posted by digitalgsm_cora

So now is posible unlock Lumia 800? After root what we should do for unlock?
Please explain the procedure...

Lumia no TP activated ok :x

Establishing Connection with Box in Main Mode...
Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
Initializing box...
Box Firmware: Cyclone Main Application v02.20, (Aug 6 2013 20:34:19, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2012
Hardware Platform: Cyclone Key Flasher Interface (c) 2012 KarwosLabs
Box Serial Number: A0******
HW Revision: E, Suitable for: Production, Case: Orange Key Casing, MCU Manufacture Time: Green PCB Rev. 4 2012 wk33, MCU 2011 wk09
Box is activated
Started box selftests procedure
All box selftests passed!
Super DCT4 Activation: TRUE
XGold/Blackberry Service Running, Counter: 100
Lumia No TP is ACTIVATED!
Avaiable Physical Memory: 300.968MB
Avaiable Virtual Memory: 1.889GB
Avaiable Pagefile: 1.641GB
Initializing FBUS...
All initialized - Ready to work

B.R.

I will post all procedures in post
Aftrr root, just usr Nss free software for unlock by patching amss

patrick_sam · 08-07-2013, 09:01

Quote:

Originally Posted by karwos

This is not true, classic was shipped with 100 credits

where ur credits gone ?

I bet there is lot of classic boxes with more than 60 credits.

right it almost more or less 3 years ago..well im looking for a reseller here for the activation but waiting for more unit to be supported as new version release

karwos · 08-07-2013, 09:03

Quote:

Originally Posted by sneha

as u said if we formate that MMC it will eresed

after do root proces if custmer plug USB at home and MMC option come and if he formate it then ??

litile confusion so pz clear it

Root is for ppls which know what they dongin
Aftrer amss patch you might need boot restore (unroot) if phone gets back to customer.
I will post all in difrent post

karwos · 08-07-2013, 09:05

Quote:

Originally Posted by habibkhoso

what about my box i purchase since 2 week ago plz check if not activated , then plz give me gift as others

Box Serial Number: B00020C7

Rules are rules, im very sorry but if we activate for you then othrr ask too.

Thats why i always recommend Key, not Rld....

karwos · 08-07-2013, 09:07

Quote:

Originally Posted by nitin28

how to activate my cyclone reloaded
i also done box wizard

i chk my cradit with server tool
Failed to Check Credits -> Failed to connect to Cyclone Server

Establishing Connection with Box in Main Mode...
Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
Initializing box...
Box Firmware: Cyclone Main Application v02.20, (Aug 6 2013 20:32:14, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2012
Hardware Platform: Cyclone Reloaded Flasher Interface (c) 2012 KarwosLabs
Box Serial Number: B0******
HW Revision: D, Suitable for: Production, Case: Reloaded Box Casing, MCU Manufacture Time: 2012, wk01 / 2011, wk27
Box is activated
Started box selftests procedure
USB Voltage 5.03v PASSED
MCU Voltage 3.26v PASSED
Core Voltage 1.76v PASSED
VBAT Voltage 0.01v PASSED
VBAT Voltage 4.96v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
Internal Box VPP Enabled
VPP Voltage 4.92v PASSED
Box VPP disabled
VPP Voltage 0.02v PASSED
All box selftests passed!
Super DCT4 Activation: TRUE
XGold/Blackberry Service Running, Counter: 100
Lumia No TP is NOT ACTIVATED! (1)
Avaiable Physical Memory: 1.607GB
Avaiable Virtual Memory: 1.804GB
Avaiable Pagefile: 3.916GB
Initializing FBUS...
All initialized - Ready to work

1. Go to nearest reseller and ask for credits. You need have 60 on your account. You can buy online directly from www.**********
2. Use box wizard to Receive activated sdc area
3. Enjoy and make money

CHAUDHRAY ARSHAD · 08-07-2013, 09:29

wow great update we need all lumia phone repair boot with out tp

kaisak · 08-07-2013, 09:38

Quote:

Originally Posted by rraza

Box Serial Number: C000021A
Card Firmware Revision: 0109
[email protected]

Its classic - without any credits :/ You need charge box to use service.

radudrm · 08-07-2013, 09:41

Booting CMT...
[Nokia USB Connectivity]: WinUSB Port opened OK!
OSBL Details
Protocol: v1.1
Version: v257.6
Build: 12
Timestamp: 17.02.2012 15:40:05
OSBL Bootloader Ready
USB&UART Tracing set
RSA Signature Calculated for QCB Boot, Writing...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031573
Signer Timestamp: 28.09.2011 16:52:12
Signer S/N: 23
Signer User ID: 10046114
Auth Level: Care
Data Encryption: 0
Image Index: 0
Asic Index: 0
Type: Image Write
Hashtable Parsed OK
Certificate Accepted
[ASIC 0, Storage 4,1] Writing 850.552kB @ 0x000000000007D200
Write taken 0.359s (Average speed: 19408,40kBits/s)
Restoring Modem from BACKUP_RAMFS_IMAGE...
Restore OK
Restarting MCU...
Rooting Finished!

karwos · 08-07-2013, 09:46

Quote:

Originally Posted by radudrm

Booting CMT...
[Nokia USB Connectivity]: WinUSB Port opened OK!
OSBL Details
Protocol: v1.1
Version: v257.6
Build: 12
Timestamp: 17.02.2012 15:40:05
OSBL Bootloader Ready
USB&UART Tracing set
RSA Signature Calculated for QCB Boot, Writing...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031573
Signer Timestamp: 28.09.2011 16:52:12
Signer S/N: 23
Signer User ID: 10046114
Auth Level: Care
Data Encryption: 0
Image Index: 0
Asic Index: 0
Type: Image Write
Hashtable Parsed OK
Certificate Accepted
[ASIC 0, Storage 4,1] Writing 850.552kB @ 0x000000000007D200
Write taken 0.359s (Average speed: 19408,40kBits/s)
Restoring Modem from BACKUP_RAMFS_IMAGE...
Restore OK
Restarting MCU...
Rooting Finished!

Please post screens also in successfull stories thread, also if you have screens from unlocking procedure, would be helpful for other users aswell.

Br

barnel_08 · 08-07-2013, 10:03

[USB Composite Device]: WinUSB Port opened OK!
[Nokia USB Connectivity]: WinUSB Port opened OK!
Switching to RAW Mode...
[Nokia USB Connectivity]: WinUSB Port opened OK!
[Nokia USB Connectivity]: WinUSB Port opened OK!
OSBL Details
Protocol: v1.1
Version: v257.6
Build: 12
Timestamp: 2/17/2012 8:40:05 PM
OSBL Bootloader Ready
USB&UART Tracing set
RSA Signature Calculated for QCB Boot, Writing...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031573
Signer Timestamp: 9/28/2011 9:52:12 PM
Signer S/N: 23
Signer User ID: 10046114
Auth Level: Care
Data Encryption: 0
Image Index: 0
Asic Index: 0
Type: Image Write
Hashtable Parsed OK
Certificate Accepted
[ASIC 0, Storage 4,1] Writing 850.552kB @ 0x000000000007D200
Write taken 1.141s (Average speed: 6106.59kBits/s)
Restoring Modem from BACKUP_RAMFS_IMAGE...
Restore OK
Restarting MCU...
Rooting Finished!

done here

thanks cyclone

anyandwinov · 08-07-2013, 10:19

failed to connect to server,upgrade firmware 2.20

tugadao · 08-07-2013, 10:45

MANY THANKS

1. Turn OFF device, wait 15 seconds afterwards
2. Eject USB cable, wait 10 seconds
3. Press and hold Volume-UP button
4. Insert USB Cable. OSBL should be booted.

Booting CMT...
[Nokia USB Connectivity]: WinUSB Port opened OK!
OSBL Details
Protocol: v1.0
Version: v256.4
Build: 10
Timestamp: 29-09-2011 14:38:56
OSBL Bootloader Ready
USB&UART Tracing set
RSA Signature Calculated for QCB Boot, Writing...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031573
Signer Timestamp: 28-09-2011 14:52:12
Signer S/N: 23
Signer User ID: 10046114
Auth Level: Care
Data Encryption: 0
Image Index: 0
Asic Index: 0
Type: Image Write
Hashtable Parsed OK
Certificate Accepted
[ASIC 0, Storage 4,1] Writing 850.552kB @ 0x000000000007D200
Write taken 1.125s (Average speed: 6193,44kBits/s)
Restoring Modem from BACKUP_RAMFS_IMAGE...
Restore OK
Restarting MCU...
Rooting Finished!

shehryar mardan · 08-07-2013, 11:04

gud1

enjoying cyclone

pasakalye · 08-07-2013, 11:09

can i activate my clasic cyclone....i have 48 credits?
Establishing Connection with Box in Main Mode...
Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
Initializing box...
Box Firmware: Cyclone Main Application v02.20, (Aug 6 2013 20:31:40, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2012
Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
Box Serial Number: C0002381
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2009, wk27
Initializing security card...
Card Serial Number: D4000423
Card Firmware Revision: 0109
Card is activated
Box is activated
Super DCT4 Activation: TRUE
XGold/Blackberry Service Running, Counter: 100
Lumia No TP is NOT ACTIVATED! (1)
Avaiable Physical Memory: 1.1023GB
Avaiable Virtual Memory: 1.910GB
Avaiable Pagefile: 3.898GB
Initializing FBUS...
All initialized - Ready to work

xerraco · 08-07-2013, 11:35

How much is the Lowest available Credits? Can I purchase 10 Credits?

08-07-2013, 09:41	#83 (permalink)
radudrm Insane Poster Join Date: Dec 2006 Location: romania Posts: 93 Member: 407773 Status: Offline Thanks Meter: 22	Lumia 800 root done! Booting CMT... [Nokia USB Connectivity]: WinUSB Port opened OK! OSBL Details Protocol: v1.1 Version: v257.6 Build: 12 Timestamp: 17.02.2012 15:40:05 OSBL Bootloader Ready USB&UART Tracing set RSA Signature Calculated for QCB Boot, Writing... OSBL Certificate Details Magic: WP70 Version: 0 Signer Server ID: 0x98031573 Signer Timestamp: 28.09.2011 16:52:12 Signer S/N: 23 Signer User ID: 10046114 Auth Level: Care Data Encryption: 0 Image Index: 0 Asic Index: 0 Type: Image Write Hashtable Parsed OK Certificate Accepted [ASIC 0, Storage 4,1] Writing 850.552kB @ 0x000000000007D200 Write taken 0.359s (Average speed: 19408,40kBits/s) Restoring Modem from BACKUP_RAMFS_IMAGE... Restore OK Restarting MCU... Rooting Finished!

08-07-2013, 09:29	#81 (permalink)
CHAUDHRAY ARSHAD No Life Poster Join Date: Aug 2006 Location: gsmchaudhrayarshad Age: 43 Posts: 7,004 Member: 328688 Status: Offline Thanks Meter: 2,282	wow great update we need all lumia phone repair boot with out tp

08-07-2013, 10:03	#85 (permalink)
barnel_08 Insane Poster Join Date: May 2008 Posts: 88 Member: 763084 Status: Offline Thanks Meter: 7	[USB Composite Device]: WinUSB Port opened OK! [Nokia USB Connectivity]: WinUSB Port opened OK! Switching to RAW Mode... [Nokia USB Connectivity]: WinUSB Port opened OK! [Nokia USB Connectivity]: WinUSB Port opened OK! OSBL Details Protocol: v1.1 Version: v257.6 Build: 12 Timestamp: 2/17/2012 8:40:05 PM OSBL Bootloader Ready USB&UART Tracing set RSA Signature Calculated for QCB Boot, Writing... OSBL Certificate Details Magic: WP70 Version: 0 Signer Server ID: 0x98031573 Signer Timestamp: 9/28/2011 9:52:12 PM Signer S/N: 23 Signer User ID: 10046114 Auth Level: Care Data Encryption: 0 Image Index: 0 Asic Index: 0 Type: Image Write Hashtable Parsed OK Certificate Accepted [ASIC 0, Storage 4,1] Writing 850.552kB @ 0x000000000007D200 Write taken 1.141s (Average speed: 6106.59kBits/s) Restoring Modem from BACKUP_RAMFS_IMAGE... Restore OK Restarting MCU... Rooting Finished! done here thanks cyclone

08-07-2013, 10:19	#86 (permalink)
anyandwinov Junior Member Join Date: May 2013 Location: Sukabumi Posts: 36 Member: 1945782 Status: Offline Thanks Meter: 7	failed to connect to server,upgrade firmware 2.20

08-07-2013, 10:45	#87 (permalink)
tugadao Freak Poster Join Date: Apr 2006 Posts: 350 Member: 266853 Status: Offline Thanks Meter: 31	MANY THANKS 1. Turn OFF device, wait 15 seconds afterwards 2. Eject USB cable, wait 10 seconds 3. Press and hold Volume-UP button 4. Insert USB Cable. OSBL should be booted. Booting CMT... [Nokia USB Connectivity]: WinUSB Port opened OK! OSBL Details Protocol: v1.0 Version: v256.4 Build: 10 Timestamp: 29-09-2011 14:38:56 OSBL Bootloader Ready USB&UART Tracing set RSA Signature Calculated for QCB Boot, Writing... OSBL Certificate Details Magic: WP70 Version: 0 Signer Server ID: 0x98031573 Signer Timestamp: 28-09-2011 14:52:12 Signer S/N: 23 Signer User ID: 10046114 Auth Level: Care Data Encryption: 0 Image Index: 0 Asic Index: 0 Type: Image Write Hashtable Parsed OK Certificate Accepted [ASIC 0, Storage 4,1] Writing 850.552kB @ 0x000000000007D200 Write taken 1.125s (Average speed: 6193,44kBits/s) Restoring Modem from BACKUP_RAMFS_IMAGE... Restore OK Restarting MCU... Rooting Finished!

08-07-2013, 11:04	#88 (permalink)
shehryar mardan No Life Poster Join Date: May 2009 Location: ISLAMABAD Age: 33 Posts: 585 Member: 1033862 Status: Offline Sonork: 100.1652017 Thanks Meter: 538	gud1 enjoying cyclone

08-07-2013, 11:09	#89 (permalink)
pasakalye Freak Poster Join Date: Apr 2006 Posts: 291 Member: 267265 Status: Offline Thanks Meter: 8	can i activate my clasic cyclone....i have 48 credits? Establishing Connection with Box in Main Mode... Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic] Initializing box... Box Firmware: Cyclone Main Application v02.20, (Aug 6 2013 20:31:40, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2012 Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs Box Serial Number: C0002381 HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2009, wk27 Initializing security card... Card Serial Number: D4000423 Card Firmware Revision: 0109 Card is activated Box is activated Super DCT4 Activation: TRUE XGold/Blackberry Service Running, Counter: 100 Lumia No TP is NOT ACTIVATED! (1) Avaiable Physical Memory: 1.1023GB Avaiable Virtual Memory: 1.910GB Avaiable Pagefile: 3.898GB Initializing FBUS... All initialized - Ready to work

08-07-2013, 11:35	#90 (permalink)
xerraco No Life Poster Join Date: Nov 2008 Location: RVIII Posts: 11,696 Member: 890926 Status: Offline Thanks Meter: 2,053	How much is the Lowest available Credits? Can I purchase 10 Credits?