GSM-Forum - CycloneBox = JAF/UFS = MT-BOX Pinouts Compared

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- Cyclonebox (https://forum.gsmhosting.com/vbb/f528/)

- - CycloneBox = JAF/UFS = MT-BOX Pinouts Compared (https://forum.gsmhosting.com/vbb/f528/cyclonebox-jaf-ufs-mt-box-pinouts-compared-750962/)

CycloneBox = JAF/UFS = MT-BOX Pinouts Compared

10pin cables from Cyclone will be ready after production people can buy those for stablility
in MT and Cyclone 10pin RX and TX were Inverted

Quote:

Originally Posted by NADEEM GONDAL (Post 4466166)

10pin cables from Cyclone will be ready after production people can buy those for stablility
in MT and Cyclone 10pin RX and TX were Inverted

Some one needs to update sticky

http://forum.gsmhosting.com/vbb/show...62&postcount=1

Quote:

*** Cyclone Box Pinouts *** SERVICE socket
(10 pin layout)
1 - BOX GENIO1
2 - VBAT (5v)
3 - BOX GENIO2
4 - BSI
5 - BOX RX_1
6 - BOX TX_1
7 - MBUS
8 - GND
9 - VPP
10 - BOX GENIO3

As you can see, pinout is compatible with UFS/JAF and other common Nokia boxes. For DCT4 you can plug directly UFS/JAF cables without any adapter. With BB5, most 8-pin market cables have TX2 instead VPP Pin. Our box don't have connected data line to VPP - only to power IC.
Tx2 might be changed ON THE FLY to any of GENIO pins (in further updated maybe also possible 100% flexible pinout modification, so ALL cables on markets will be supported!).
Bundled adapter crossing pin 3 with 9. That means on output from adapter, on pin 8 you will have TX2 (service pin 3) and still compatibility with UFS/JAF cables will be. VPP is not cutted. It's on pin nr 3 (unused pin nr 2 - jaf/ufs cables) so still VPP funcionality can be used on 8 pin cables, instead of purchasing 10 pin! With small mods needed, of course.
You can use too native 10pin Cyclone cables, but they are not avaiable on market at moment.

DIAGNOSTIC socket
1 - VBAT (5v)
2 - USART CLK
3 - USART TXD
4 - FREQ_MEASURMENT_A0
5 - FREQ_MEASURMENT_CLK
6 - DIAG_1_VOLTMETER
7 - DIAG_2_VOLTMETER
8 - DIAG_3_VOLTMETER
9 - USART RXD
10 - GND

Will be used soon.

This diagram is to help ppls making or modifying cables for cyclonebox.

http://img15.imageshack.us/img15/981/allboxpinout.jpg

BR

Added simple SPST switch to support New BB5 and old BB5, DCT4+...

http://img199.imageshack.us/img199/9...oxpinout1d.jpg

Quote:

Originally Posted by 10xs4asking (Post 4495862)

Added simple SPST switch to support New BB5 and old BB5, DCT4+...

http://img199.imageshack.us/img199/9...oxpinout1d.jpg

good Pinouts Compared thnx

Gud compared thanks for helping

When will Cyclone cables be ready to buy :rolleyes:

B.rgds

John...:)

Dear mates, I have some doubts about schematics. It is true that is quite well explain by itself but just to be sure and do not mess up more my life I want to confirm what I have learned from you guys,

I attached an image according to my understanding, wheter I am right or wrong let me know.

*** Question, What does pin 3 on Cyclone box has so special that can give support to new BaseBand 5+ phones and not given the same support by using pin 9?****

Thanks in advance for all your replies and help.

BR FROM NICARAGUA.

good information i need ub box and adpter pinout any body have please

Good pinout can we used mt adptor on cyclone.

is the jaf cable can be use on cyclone box

Good information thanks for helping
Best Regards

Good information thanks for sharing

Good information thanks

Quote:

Originally Posted by watari31 (Post 4729257)

is the jaf cable can be use on cyclone box

Yes.. DCT4 cables you can use them directly and BB5 one using the adaptor in bundle with the box.

BR

Alex