!!! E65 Failed to Create RPL from phone -> Failed to Boot / Prepare Phone !!! - GSM-Forum

sirbigman · 06-25-2009, 17:25

hello

here u have the info

Code:

MCU Version    V 2.0615.10
MCU Date    22-08-07
Product        RM-208
Manufacturer    (c) Nokia.    
IMEI        353263019800082
Mastercode    7065644645
IMEI Spare    3A35620391080008
IMEI SV        3335620391080028F0000000
PPM        2.0633.62.03, 22-08-07, RM-208, (c)Nokiaj4.2.0633.62.03_v292.20, 22-08-07, RM-208, (c)NokiaqHDHCI Version 2 (rev. 0). LMP Version 2 (rev. 3504). Manufacturer 13.n1o256r(!2.0633.62.03.20 01-10-2007 292U, 
CNT        2.0633.62.03.20 01-10-2007 292U, 
PSN        SIJ262945
Product Code    0552463
Basic Product Code    0536849
PSD        0000000000000000
WLAN MAC    001C9A1D7318
APE SW        2.0633.62.03, 22-08-07, RM-208, (c)Nokia
APE Variant    2.0633.62.03_v292.20, 22-08-07, RM-208, (c)Nokia
APE HW        1
APE ADSP    256
APE BT        HCI Version 2 (rev. 0). LMP Version 2 (rev. 3504). Manufacturer 13.
RETU        15
TAHVO        22
AHNE        30
HW        0802i,&2.0633.62.03, 22-08-07, RM-208, (c)Nokiaj4.2.0633.62.03_v292.20, 22-08-07, RM-208, (c)NokiaqHDHCI Version 2 (rev. 0). LMP Version 2 (rev. 3504). Manufacturer 13.n1o256r(!2.0633.62.03.20 01-10-2007 292U, 
PCI        i,&2.0633.62.03, 22-08-07, RM-208, (c)Nokiaj4.2.0633.62.03_v292.20, 22-08-07, RM-208, (c)NokiaqHDHCI Version 2 (rev. 0). LMP Version 2 (rev. 3504). Manufacturer 13.n1o256r(!2.0633.62.03.20 01-10-2007 292U, 
UEM        2.0633.62.03, 22-08-07, RM-208, (c)Nokiaj4.2.0633.62.03_v292.20, 22-08-07, RM-208, (c)NokiaqHDHCI Version 2 (rev. 0). LMP Version 2 (rev. 3504). Manufacturer 13.n1o256r(!2.0633.62.03.20 01-10-2007 292U, 
UPP        2.0633.62.03, 22-08-07, RM-208, (c)Nokiaj4.2.0633.62.03_v292.20, 22-08-07, RM-208, (c)NokiaqHDHCI Version 2 (rev. 0). LMP Version 2 (rev. 3504). Manufacturer 13.n1o256r(!2.0633.62.03.20 01-10-2007 292U, 
RFIC        17141715
DSP        , A06w14v51
LCD        2.0633.62.03, 22-08-07, RM-208, (c)Nokiaj4.2.0633.62.03_v292.20, 22-08-07, RM-208, (c)NokiaqHDHCI Version 2 (rev. 0). LMP Version 2 (rev. 3504). Manufacturer 13.n1o256r(!2.0633.62.03.20 01-10-2007 292U, 
BT        2.0633.62.03, 22-08-07, RM-208, (c)Nokiaj4.2.0633.62.03_v292.20, 22-08-07, RM-208, (c)NokiaqHDHCI Version 2 (rev. 0). LMP Version 2 (rev. 3504). Manufacturer 13.n1o256r(!2.0633.62.03.20 01-10-2007 292U, 
ADSP Sw        2.0633.62.03, 22-08-07, RM-208, (c)Nokiaj4.2.0633.62.03_v292.20, 22-08-07, RM-208, (c)NokiaqHDHCI Version 2 (rev. 0). LMP Version 2 (rev. 3504). Manufacturer 13.n1o256r(!2.0633.62.03.20 01-10-2007 292U, 
ADSP DevID        2.0633.62.03, 22-08-07, RM-208, (c)Nokiaj4.2.0633.62.03_v292.20, 22-08-07, RM-208, (c)NokiaqHDHCI Version 2 (rev. 0). LMP Version 2 (rev. 3504). Manufacturer 13.n1o256r(!2.0633.62.03.20 01-10-2007 292U, 
ADSP RevID        2.0633.62.03, 22-08-07, RM-208, (c)Nokiaj4.2.0633.62.03_v292.20, 22-08-07, RM-208, (c)NokiaqHDHCI Version 2 (rev. 0). LMP Version 2 (rev. 3504). Manufacturer 13.n1o256r(!2.0633.62.03.20 01-10-2007 292U, 
AEM        2.0633.62.03, 22-08-07, RM-208, (c)Nokiaj4.2.0633.62.03_v292.20, 22-08-07, RM-208, (c)NokiaqHDHCI Version 2 (rev. 0). LMP Version 2 (rev. 3504). Manufacturer 13.n1o256r(!2.0633.62.03.20 01-10-2007 292U, 
Flip MCUSW        2.0633.62.03, 22-08-07, RM-208, (c)Nokiaj4.2.0633.62.03_v292.20, 22-08-07, RM-208, (c)NokiaqHDHCI Version 2 (rev. 0). LMP Version 2 (rev. 3504). Manufacturer 13.n1o256r(!2.0633.62.03.20 01-10-2007 292U, 
Simlock Server    SIMLOCK SERVER VERSION 63
Simlock Key    2140100000000000
Simlock Profile    0100000000000000
Simlock Key Cnt    0
Simlock FBUS Cnt    0
Simlock [1,1]    State: CLOSED    Type: MCC-MNC    Data: 21401F
Simlock [2,1]    State: CLOSED    Type: MCC-MNC    Data: 21401F

here is the rpl creation FAIL

Code:

RPL Creation started...
Processing CMT Part...
Storing Product Code...
Storing PSN...
Storing HWID...
Simlock Store not supported, not a PA_SL2 Phone
WMDRM Store not supported
Booting RAP...
APE_SYSTEM_ASIC_ID:     17100708
APE_ASIC_MODE_ID:     00
APE_PUBLIC_ID:         A3DE9FC0D90C51241CE9AF6EFAFD3F58E6C2C546
APE_ROOT_KEY_HASH:     49A97E826B93BA20B7ED0B082475C00500000000
APE_ROM_ID:         1DFD66132C872FD4
CMT_SYSTEM_ASIC_ID:     000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:         00000295
CMT_EM_ASIC_ID:         00000B22
CMT_PUBLIC_ID:         28F0000D77F801548AE652CFBF6BC5DC7ED1CF66
CMT_ASIC_MODE_ID:     00
CMT_ROOT_KEY_HASH:     BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:         273F6D55DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0266638E9C2164FC6B5194ED596A6A251C699896
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x0098007800A500C0, Toshiba, NAND
FlashContent[0,APE]: 00020000000600000000000000000000, NAND
h3_sam_nand_format.fg, Type: Algorithm, Rev: 0.1.16.255, Algo: OMAP1610 FORMAT ALG
Box VPP disabled
Internal APE Phone VPP Enabled
Failed to Create RPL from phone -> Failed to Boot / Prepare Phone

and here are the self tests

Code:

Selftests to proceed: 26
Passed        ST_TAHVOINT_TEST
Passed        ST_UEM_CBUS_IF_TEST
Passed        ST_EAR_DATA_LOOP_TEST
Passed        ST_SIM_CLK_LOOP_TEST
Passed        ST_SIM_IO_CTRL_LOOP_TEST
Passed        ST_SIM_LOCK_TEST
Passed        ST_SECURITY_TEST
Passed        ST_PWR_KEY_TEST
Passed        ST_CURRENT_CONS_TEST
Passed        ST_BACKUP_BATT_TEST
Passed        ST_WARRANTY_TEST
Failed        ST_CMT_APE_WAKEUP_TEST
Passed        ST_SLEEPCLK_FREQ_TEST
Passed        ST_HOOKINT_TEST
Passed        ST_BTEMP_TEST
Passed        ST_EXT_DEVICE_TEST
Passed        ST_CDSP_RF_BB_IF_TEST
Passed        ST_CDSP_RF_SUPPLY_TEST
Passed        ST_CDSP_TX_IQ_TEST
Passed        ST_CDSP_TXC_DATA_TEST
Passed        ST_CDSP_PWR_DETECTOR_BIAS_TEST
Passed        ST_CDSP_RX_PLL_PHASE_LOCK_TEST
Passed        ST_CDSP_TX_PLL_PHASE_LOCK_TEST
Passed        ST_CDSP_WCDMA_TX_POWER_TEST
Passed        ST_CDSP_RX_IQ_LOOP_BACK_TEST
Passed        ST_CDSP_GSM_TX_POWER_TEST
Selftests done, Tests total: 26, Tests passed: 25, Tests not passed: 1

the cable is fine, no problem with him 100%

i think there is a bug for this version because i have seen that on other thread someone with the same phone had a problem like this, the phone fail to boot on a flash operation

WBR

moulnisky · 06-25-2009, 17:34

It is an SL1 so just do back-up PM
Thick where says "skip SP info"
then click on unlock and will be ok :-)

BR

Alex

ovidiucosti · 06-25-2009, 17:36

No bug bro.
make sure cable is 100% ok and just try again and again but WITOUT DISCONNECTING PHONE.
i had too this problem yesteday and today but i solved without no problem.
BR

sirbigman · 06-25-2009, 17:39

Quote:

Originally Posted by moulnisky

It is an SL1 so just do back-up PM
Thick where says "skip SP info"
then click on unlock and will be ok :-)

BR

Alex

you don't understand my point.

this is a bug and it need to be resolved

i m doing tests with all the models to make a nice manual with ``Cyclone TESTED PHONES`` , all that need to be done

WBR

sirbigman · 06-25-2009, 17:41

Quote:

Originally Posted by ovidiucosti

No bug bro.
make sure cable is 100% ok and just try again and again but WITOUT DISCONNECTING PHONE.
i had too this problem yesteday and today but i solved without no problem.
BR

with the same phone version?

WBR

moulnisky · 06-25-2009, 17:44

Quote:

Originally Posted by sirbigman

you don't understand my point.

this is a bug and it need to be resolved

i m doing tests with all the models to make a nice manual with ``Cyclone TESTED PHONES`` , all that need to be done

WBR

I understand you point of view.
This is a little bug we all know and will be corrected in the final release of cyclone using the proper loaders as already been told.
Obviously if you need to unlock the phone you can do the job anyway and in a safe mode..

BR

Alex

ovidiucosti · 06-25-2009, 17:45

Bro you don't understand is not a bug that is what i'm saying i had this problem a lot of times but after second try created rpl from phone, read pm, unlocked, flashed well....everything.for me at least was no hard to press two time "create rpl from phone".

sirbigman · 06-25-2009, 17:50

Quote:

Originally Posted by moulnisky

I understand you point of view.
This is a little bug we all know and will be corrected in the final release of cyclone using the proper loaders as already been told.
Obviously if you need to unlock the phone you can do the job anyway and in a safe mode..

BR

Alex

yes i know , but i don't wanna UNLOCK the phone

, i just wanna BACKUP the RPL,

Quote:

Originally Posted by ovidiucosti

Bro you don't understand is not a bug that is what i'm saying i had this problem a lot of times but after second try created rpl from phone, read pm, unlocked, flashed well....everything.for me at least was no hard to press two time "create rpl from phone".

believe me this phone (E65) don't work, and what are you talking about is a MALFUNCTION, the box don't have the right current in the IC to do the JOB

moulnisky · 06-25-2009, 17:56

Quote:

Originally Posted by sirbigman

believe me this phone (E65) don't work, and what are you talking about is a MALFUNCTION, the box don't have the right current in the IC to do the JOB

This is a limit coming from the use of the power coming from the usb port.
already been a big thread about how to solve the "power problem" in all the boxes included cyclone and I still use my self-made solution daily :-)
Without an add on like the one i use (is similar to the new TMA adapter) been a nightmare unlock all the mobiles greedy about the current used.

here the thread about
http://forum.gsmhosting.com/vbb/showthread.php?t=747969

BR

Alex

NADEEM GONDAL · 06-26-2009, 05:34

@thread Starter
If u professional Enough read sticky threads and modified ur BOX for Power needs..

sirbigman · 06-26-2009, 09:28

Quote:

Originally Posted by NADEEM GONDAL

@thread Starter
If u professional Enough read sticky threads and modified ur BOX for Power needs..

have u tested this model with modified BOX, adapter etc to make RPL BACKUP?

WBR

marquito · 07-03-2009, 12:20

Quote:

Originally Posted by sirbigman

hello

here u have the info

Code:

MCU Version    V 2.0615.10
MCU Date    22-08-07
Product        RM-208
Manufacturer    (c) Nokia.    
IMEI        353263019800082
Mastercode    7065644645
IMEI Spare    3A35620391080008
IMEI SV        3335620391080028F0000000
PPM        2.0633.62.03, 22-08-07, RM-208, (c)Nokiaj4.2.0633.62.03_v292.20, 22-08-07, RM-208, (c)NokiaqHDHCI Version 2 (rev. 0). LMP Version 2 (rev. 3504). Manufacturer 13.n1o256r(!2.0633.62.03.20 01-10-2007 292U, 
CNT        2.0633.62.03.20 01-10-2007 292U, 
PSN        SIJ262945
Product Code    0552463
Basic Product Code    0536849
PSD        0000000000000000
WLAN MAC    001C9A1D7318
APE SW        2.0633.62.03, 22-08-07, RM-208, (c)Nokia
APE Variant    2.0633.62.03_v292.20, 22-08-07, RM-208, (c)Nokia
APE HW        1
APE ADSP    256
APE BT        HCI Version 2 (rev. 0). LMP Version 2 (rev. 3504). Manufacturer 13.
RETU        15
TAHVO        22
AHNE        30
HW        0802i,&2.0633.62.03, 22-08-07, RM-208, (c)Nokiaj4.2.0633.62.03_v292.20, 22-08-07, RM-208, (c)NokiaqHDHCI Version 2 (rev. 0). LMP Version 2 (rev. 3504). Manufacturer 13.n1o256r(!2.0633.62.03.20 01-10-2007 292U, 
PCI        i,&2.0633.62.03, 22-08-07, RM-208, (c)Nokiaj4.2.0633.62.03_v292.20, 22-08-07, RM-208, (c)NokiaqHDHCI Version 2 (rev. 0). LMP Version 2 (rev. 3504). Manufacturer 13.n1o256r(!2.0633.62.03.20 01-10-2007 292U, 
UEM        2.0633.62.03, 22-08-07, RM-208, (c)Nokiaj4.2.0633.62.03_v292.20, 22-08-07, RM-208, (c)NokiaqHDHCI Version 2 (rev. 0). LMP Version 2 (rev. 3504). Manufacturer 13.n1o256r(!2.0633.62.03.20 01-10-2007 292U, 
UPP        2.0633.62.03, 22-08-07, RM-208, (c)Nokiaj4.2.0633.62.03_v292.20, 22-08-07, RM-208, (c)NokiaqHDHCI Version 2 (rev. 0). LMP Version 2 (rev. 3504). Manufacturer 13.n1o256r(!2.0633.62.03.20 01-10-2007 292U, 
RFIC        17141715
DSP        , A06w14v51
LCD        2.0633.62.03, 22-08-07, RM-208, (c)Nokiaj4.2.0633.62.03_v292.20, 22-08-07, RM-208, (c)NokiaqHDHCI Version 2 (rev. 0). LMP Version 2 (rev. 3504). Manufacturer 13.n1o256r(!2.0633.62.03.20 01-10-2007 292U, 
BT        2.0633.62.03, 22-08-07, RM-208, (c)Nokiaj4.2.0633.62.03_v292.20, 22-08-07, RM-208, (c)NokiaqHDHCI Version 2 (rev. 0). LMP Version 2 (rev. 3504). Manufacturer 13.n1o256r(!2.0633.62.03.20 01-10-2007 292U, 
ADSP Sw        2.0633.62.03, 22-08-07, RM-208, (c)Nokiaj4.2.0633.62.03_v292.20, 22-08-07, RM-208, (c)NokiaqHDHCI Version 2 (rev. 0). LMP Version 2 (rev. 3504). Manufacturer 13.n1o256r(!2.0633.62.03.20 01-10-2007 292U, 
ADSP DevID        2.0633.62.03, 22-08-07, RM-208, (c)Nokiaj4.2.0633.62.03_v292.20, 22-08-07, RM-208, (c)NokiaqHDHCI Version 2 (rev. 0). LMP Version 2 (rev. 3504). Manufacturer 13.n1o256r(!2.0633.62.03.20 01-10-2007 292U, 
ADSP RevID        2.0633.62.03, 22-08-07, RM-208, (c)Nokiaj4.2.0633.62.03_v292.20, 22-08-07, RM-208, (c)NokiaqHDHCI Version 2 (rev. 0). LMP Version 2 (rev. 3504). Manufacturer 13.n1o256r(!2.0633.62.03.20 01-10-2007 292U, 
AEM        2.0633.62.03, 22-08-07, RM-208, (c)Nokiaj4.2.0633.62.03_v292.20, 22-08-07, RM-208, (c)NokiaqHDHCI Version 2 (rev. 0). LMP Version 2 (rev. 3504). Manufacturer 13.n1o256r(!2.0633.62.03.20 01-10-2007 292U, 
Flip MCUSW        2.0633.62.03, 22-08-07, RM-208, (c)Nokiaj4.2.0633.62.03_v292.20, 22-08-07, RM-208, (c)NokiaqHDHCI Version 2 (rev. 0). LMP Version 2 (rev. 3504). Manufacturer 13.n1o256r(!2.0633.62.03.20 01-10-2007 292U, 
Simlock Server    SIMLOCK SERVER VERSION 63
Simlock Key    2140100000000000
Simlock Profile    0100000000000000
Simlock Key Cnt    0
Simlock FBUS Cnt    0
Simlock [1,1]    State: CLOSED    Type: MCC-MNC    Data: 21401F
Simlock [2,1]    State: CLOSED    Type: MCC-MNC    Data: 21401F

here is the rpl creation FAIL

Code:

RPL Creation started...
Processing CMT Part...
Storing Product Code...
Storing PSN...
Storing HWID...
Simlock Store not supported, not a PA_SL2 Phone
WMDRM Store not supported
Booting RAP...
APE_SYSTEM_ASIC_ID:     17100708
APE_ASIC_MODE_ID:     00
APE_PUBLIC_ID:         A3DE9FC0D90C51241CE9AF6EFAFD3F58E6C2C546
APE_ROOT_KEY_HASH:     49A97E826B93BA20B7ED0B082475C00500000000
APE_ROM_ID:         1DFD66132C872FD4
CMT_SYSTEM_ASIC_ID:     000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:         00000295
CMT_EM_ASIC_ID:         00000B22
CMT_PUBLIC_ID:         28F0000D77F801548AE652CFBF6BC5DC7ED1CF66
CMT_ASIC_MODE_ID:     00
CMT_ROOT_KEY_HASH:     BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:         273F6D55DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0266638E9C2164FC6B5194ED596A6A251C699896
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x0098007800A500C0, Toshiba, NAND
FlashContent[0,APE]: 00020000000600000000000000000000, NAND
h3_sam_nand_format.fg, Type: Algorithm, Rev: 0.1.16.255, Algo: OMAP1610 FORMAT ALG
Box VPP disabled
Internal APE Phone VPP Enabled
Failed to Create RPL from phone -> Failed to Boot / Prepare Phone

and here are the self tests

Code:

Selftests to proceed: 26
Passed        ST_TAHVOINT_TEST
Passed        ST_UEM_CBUS_IF_TEST
Passed        ST_EAR_DATA_LOOP_TEST
Passed        ST_SIM_CLK_LOOP_TEST
Passed        ST_SIM_IO_CTRL_LOOP_TEST
Passed        ST_SIM_LOCK_TEST
Passed        ST_SECURITY_TEST
Passed        ST_PWR_KEY_TEST
Passed        ST_CURRENT_CONS_TEST
Passed        ST_BACKUP_BATT_TEST
Passed        ST_WARRANTY_TEST
Failed        ST_CMT_APE_WAKEUP_TEST
Passed        ST_SLEEPCLK_FREQ_TEST
Passed        ST_HOOKINT_TEST
Passed        ST_BTEMP_TEST
Passed        ST_EXT_DEVICE_TEST
Passed        ST_CDSP_RF_BB_IF_TEST
Passed        ST_CDSP_RF_SUPPLY_TEST
Passed        ST_CDSP_TX_IQ_TEST
Passed        ST_CDSP_TXC_DATA_TEST
Passed        ST_CDSP_PWR_DETECTOR_BIAS_TEST
Passed        ST_CDSP_RX_PLL_PHASE_LOCK_TEST
Passed        ST_CDSP_TX_PLL_PHASE_LOCK_TEST
Passed        ST_CDSP_WCDMA_TX_POWER_TEST
Passed        ST_CDSP_RX_IQ_LOOP_BACK_TEST
Passed        ST_CDSP_GSM_TX_POWER_TEST
Selftests done, Tests total: 26, Tests passed: 25, Tests not passed: 1

the cable is fine, no problem with him 100%

i think there is a bug for this version because i have seen that on other thread someone with the same phone had a problem like this, the phone fail to boot on a flash operation

WBR

Hello,

I also have a E65, and I'm having the same issue has you, I can flash my phone, but when I try to read/wirte the certificates I receive the error "Failed to Boot / Prepare". I even tryed to connect external power supply to my Cyclone box, and the result is exactly the same.
Any suggestions?

Best regards,
Marquito

karwos · 07-08-2009, 15:05

After message... "Calculate NCK..." Simply wait 5-10seconds and then press YES.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
error to create rpl from E65	devil24	Cyclonebox	2	02-05-2010 22:25
Failed to Process all Image files -> Failed to prepare BB5 USB Flashing	neo25_gsm	Cyclonebox	4	01-13-2010 16:49
unlock nokia 5800d Failed to Boot - Prepare Phone	kumaness	Cyclonebox	3	01-09-2010 12:29
BB5 Unlock Failed -> Failed to Boot / Prepare Phone	monkeymobile	Cyclonebox	5	01-03-2010 16:20
cannot create RPL from phone.	hugmax	Cyclonebox	5	10-07-2009 05:18

06-25-2009, 17:34	#2 (permalink)
moulnisky No Life Poster Join Date: Jan 2009 Location: England Age: 58 Posts: 17,681 Member: 947561 Status: Offline Thanks Meter: 14,048	It is an SL1 so just do back-up PM Thick where says "skip SP info" then click on unlock and will be ok :-) BR Alex

06-25-2009, 17:36	#3 (permalink)
ovidiucosti Freak Poster Join Date: Mar 2006 Posts: 389 Member: 247347 Status: Offline Thanks Meter: 58	No bug bro. make sure cable is 100% ok and just try again and again but WITOUT DISCONNECTING PHONE. i had too this problem yesteday and today but i solved without no problem. BR

06-25-2009, 17:45	#7 (permalink)
ovidiucosti Freak Poster Join Date: Mar 2006 Posts: 389 Member: 247347 Status: Offline Thanks Meter: 58	Bro you don't understand is not a bug that is what i'm saying i had this problem a lot of times but after second try created rpl from phone, read pm, unlocked, flashed well....everything.for me at least was no hard to press two time "create rpl from phone".

06-26-2009, 05:34	#10 (permalink)
NADEEM GONDAL No Life Poster Join Date: Aug 2007 Location: England Posts: 3,691 Member: 575900 Status: Offline Thanks Meter: 3,176	@thread Starter If u professional Enough read sticky threads and modified ur BOX for Power needs..

07-08-2009, 15:05	#13 (permalink)
karwos No Life Poster Join Date: Feb 2005 Location: Poland Age: 33 Posts: 4,943 Member: 117496 Status: Offline Sonork: 100.83919 Thanks Meter: 22,689	After message... "Calculate NCK..." Simply wait 5-10seconds and then press YES.