Please help me for nokia n95 unlocking!!!! - GSM-Forum

tommyvo · 06-17-2009, 02:56

HI!

Today I try to unlock Nokia n95, I used TX2 adaptor + TMA adaptor and 7 pin cable.However Test mode NEVER come up.

I have to click on " CHECK FLASHING BUS" TO FORCE PHONE TO LOCAL MODE. AFTER THAT I CAN READ PHONE INFO.

AFTER THAT, I CLICK ON UNLOCK AND PHONE PROCESSING TO UNLOCK. HOWEVER

imlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock[1,1] State: CLOSED Type: MCC-MNC Data: 50506F
Simlock[2,1] State: CLOSED Type: MCC-MNC Data: 50599F
Simlock[3,1] State: CLOSED Type: MCC-MNC Data: 50506F
Simlock[4,1] State: CLOSED Type: MCC-MNC Data: 50599F
Simlock[5,1] State: CLOSED Type: MCC-MNC Data: 00101F
Simlock[6,1] State: CLOSED Type: MCC-MNC Data: 00101F
Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
APE_SYSTEM_ASIC_ID: 24200705
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: 154989EEF77CF48E1CA6491DF3C4FA53E911CB71
APE_ROOT_KEY_HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 22400105DC740058DC6AC86A28A8C1C8E202A9D5
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: A8C1D6713E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 25129A39D9A3B031CA0124E1E90F5A17ED3EFC89
APE Boot skipped on user request
Restarting MCU...
Determined PA Simlock: PA_SL
Checking for Rootkey Hash support...
Restarting MCU...
Booting RAP...
APE_SYSTEM_ASIC_ID: 24200705
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: 154989EEF77CF48E1CA6491DF3C4FA53E911CB71
APE_ROOT_KEY_HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 22400105DC740058DC6AC86A28A8C1C8E202A9D5
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: A8C1D6713E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
Received Security Block OK !
Writing Security Block...
BB5 Unlock Failed -> Phone not detected (FBUS)

THE REASON IS PHONE IS NOT STABLE ON LOCAL MODE SO IT CAN NOT UNLOCK ANYMORE.

PLEASE HELP ME ANY IDEA

THANKS

TOMMY

yentrang120705 · 06-17-2009, 03:56

[QUOTE=tommyvo;4569907]HI!

Today I try to unlock Nokia n95, I used TX2 adaptor + TMA adaptor and 7 pin cable.However Test mode NEVER come up.

I have to click on " CHECK FLASHING BUS" TO FORCE PHONE TO LOCAL MODE. AFTER THAT I CAN READ PHONE INFO.

AFTER THAT, I CLICK ON UNLOCK AND PHONE PROCESSING TO UNLOCK. HOWEVER

imlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock[1,1] State: CLOSED Type: MCC-MNC Data: 50506F
Simlock[2,1] State: CLOSED Type: MCC-MNC Data: 50599F
Simlock[3,1] State: CLOSED Type: MCC-MNC Data: 50506F
Simlock[4,1] State: CLOSED Type: MCC-MNC Data: 50599F
Simlock[5,1] State: CLOSED Type: MCC-MNC Data: 00101F
Simlock[6,1] State: CLOSED Type: MCC-MNC Data: 00101F
Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
APE_SYSTEM_ASIC_ID: 24200705
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: 154989EEF77CF48E1CA6491DF3C4FA53E911CB71
APE_ROOT_KEY_HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 22400105DC740058DC6AC86A28A8C1C8E202A9D5
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: A8C1D6713E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 25129A39D9A3B031CA0124E1E90F5A17ED3EFC89
APE Boot skipped on user request
Restarting MCU...
Determined PA Simlock: PA_SL
Checking for Rootkey Hash support...
Restarting MCU...
Booting RAP...
APE_SYSTEM_ASIC_ID: 24200705
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: 154989EEF77CF48E1CA6491DF3C4FA53E911CB71
APE_ROOT_KEY_HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 22400105DC740058DC6AC86A28A8C1C8E202A9D5
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: A8C1D6713E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
Received Security Block OK !
Writing Security Block...
BB5 Unlock Failed -> Phone not detected (FBUS)

THE REASON IS PHONE IS NOT STABLE ON LOCAL MODE SO IT CAN NOT UNLOCK ANYMORE.

PLEASE HELP ME ANY IDEA

THANKS

TOMMY[/QUOT
Bro,Try to change the value of BSI on TMA adaptor.If the phone can not go into local mode,you can't unlock it.[ or remove camera and try again]

tommyvo · 06-17-2009, 05:11

thank you!

I did change TMA adaptor, however local mode is still not come up.

WHY IT SO HARD TO GET LOCAL MODE FOR NOKIA N95 AND Nokia N95 8GB?

I GOT ANYTHING ( TX2 ADAPTOR + TMA ADAPTOR+ GOOD 7 PIN CABLE), HOWEVER I CAN NOT UNLOCK THESE PHONE WITH CYCLONE .

ANY IDEA OR ANY SOLUTION TO GET LOCAL EASIER.

THANK YOU

moulnisky · 06-17-2009, 06:13

Is the version of the TMA adapter with the USB cable? is this cable connected to a free usb port of your computer or to a good powered hub or t a good USB charger? Are you kepint the dummy battery and the mobile well fit each other using an elastic band or some other system?.

BR

Alex

tommyvo · 06-17-2009, 06:45

yes, TMA adaptor come with USB. do I need connect this usb to computer?

What you meant: " Are you kepint the dummy battery and the mobile well fit each other using an elastic band or some other system?." ----> I really not understand these. Please expalain for me.

thank you

Tommy

marekom · 06-17-2009, 06:46

Wait for update cyclone box

moulnisky · 06-17-2009, 06:59

Quote:

Originally Posted by tommyvo

yes, TMA adaptor come with USB. do I need connect this usb to computer?

What you meant: " Are you kepint the dummy battery and the mobile well fit each other using an elastic band or some other system?." ----> I really not understand these. Please expalain for me.

thank you

Tommy

OF course you need! that usb cable added is to Give more power to the mobiles like the N95 one :-)
If you connect it to the computer you will see immediately the difference..
about keep the dummy battery and mobile weel fit each other is to prevent the fbus moving and giving you a bad contact.
retry please and post results.

BR

Alex

moulnisky · 06-17-2009, 07:03

Quote:

Originally Posted by marekom

Wait for update cyclone box

Nothing to do with the update.. Sometime, without a solution for the power and/or bsi problem, is hard to unlock a 6500S too...
I always use my homemade TMA adaptor and never failed an unlock or flash..

Thread : http://forum.gsmhosting.com/vbb/showthread.php?t=747969

BR

Alex

UnlockingPoint · 06-17-2009, 08:56

thats very simple its really common problem
ure cable is not ok
it identifies ok but cannot unlock or flash the phone
change ure cable problem will b solved insh*****

Avantha · 06-17-2009, 09:16

Connect the TMA USB cable to computer and change the dip switch to 5.1k,then it will go to local mode.

billgetas · 06-17-2009, 10:08

test whith power the box or the phone y have same problem whit mt-box.....

NADEEM GONDAL · 06-17-2009, 10:52

for newer Rapido i recommend...with TMA external Power or Modification Inside for usb power

06-17-2009, 02:56	#1 (permalink)
tommyvo Freak Poster Join Date: May 2008 Posts: 351 Member: 771272 Status: Offline Thanks Meter: 8	Please help me for nokia n95 unlocking!!!! HI! Today I try to unlock Nokia n95, I used TX2 adaptor + TMA adaptor and 7 pin cable.However Test mode NEVER come up. I have to click on " CHECK FLASHING BUS" TO FORCE PHONE TO LOCAL MODE. AFTER THAT I CAN READ PHONE INFO. AFTER THAT, I CLICK ON UNLOCK AND PHONE PROCESSING TO UNLOCK. HOWEVER imlock Key Cnt 0 Simlock FBUS Cnt 0 Simlock[1,1] State: CLOSED Type: MCC-MNC Data: 50506F Simlock[2,1] State: CLOSED Type: MCC-MNC Data: 50599F Simlock[3,1] State: CLOSED Type: MCC-MNC Data: 50506F Simlock[4,1] State: CLOSED Type: MCC-MNC Data: 50599F Simlock[5,1] State: CLOSED Type: MCC-MNC Data: 00101F Simlock[6,1] State: CLOSED Type: MCC-MNC Data: 00101F Reading Security Block... Security block OK! Determining PA Simlock... Booting RAP... APE_SYSTEM_ASIC_ID: 24200705 APE_ASIC_MODE_ID: 00 APE_PUBLIC_ID: 154989EEF77CF48E1CA6491DF3C4FA53E911CB71 APE_ROOT_KEY_HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000 CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103 CMT_EM_ASIC_ID: 00000295 CMT_EM_ASIC_ID: 00000B22 CMT_PUBLIC_ID: 22400105DC740058DC6AC86A28A8C1C8E202A9D5 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE CMT_ROM_ID: A8C1D6713E691FF8 RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5 Flashbus Write baud set to 1.0Mbits Flashbus Read baud set to 98Kbits FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR FlashContent[0,CMT]: 00000000000000000000000000000000, NOR FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5 Flashbus Write baud set to 4.0Mbits Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit Box TX2 Data Pin set to: Service Pin 3 Box VPP disabled Internal CMT Phone VPP Enabled PAPUBKEYS Hash for CMT: 25129A39D9A3B031CA0124E1E90F5A17ED3EFC89 APE Boot skipped on user request Restarting MCU... Determined PA Simlock: PA_SL Checking for Rootkey Hash support... Restarting MCU... Booting RAP... APE_SYSTEM_ASIC_ID: 24200705 APE_ASIC_MODE_ID: 00 APE_PUBLIC_ID: 154989EEF77CF48E1CA6491DF3C4FA53E911CB71 APE_ROOT_KEY_HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000 CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103 CMT_EM_ASIC_ID: 00000295 CMT_EM_ASIC_ID: 00000B22 CMT_PUBLIC_ID: 22400105DC740058DC6AC86A28A8C1C8E202A9D5 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE CMT_ROM_ID: A8C1D6713E691FF8 RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5 Flashbus Write baud set to 1.0Mbits Flashbus Read baud set to 98Kbits Exploiting - running preloader... Preloader running OK, Running Custom Loader... Custom loader running OK! Working... Received Security Block OK ! Writing Security Block... BB5 Unlock Failed -> Phone not detected (FBUS) THE REASON IS PHONE IS NOT STABLE ON LOCAL MODE SO IT CAN NOT UNLOCK ANYMORE. PLEASE HELP ME ANY IDEA THANKS TOMMY

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
mxkey plz help me for nokia N95-8G	boussoula	MXKEY Nokia Flasher and Unlocker (by Alim Hape)	15	03-19-2010 02:52
please help me for nokia 6131	dreameye	Nokia Base Band 5 ( BB-5 )	0	07-13-2009 11:43
Please help me For nokia n90 not charging	Alfa_Team	Nokia Hardware & Hardware Repair	1	09-04-2008 01:58
plz help me for nokia chiana n95 pin 6 remouve	espoir1283	Chinese Cocktail	1	11-15-2007 09:57
please help me for my nokia 6061	satmaxo	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	10-26-2006 12:11

06-17-2009, 03:56	#2 (permalink)
yentrang120705 Freak Poster Join Date: Aug 2006 Posts: 236 Member: 330960 Status: Offline Thanks Meter: 54	[QUOTE=tommyvo;4569907]HI! Today I try to unlock Nokia n95, I used TX2 adaptor + TMA adaptor and 7 pin cable.However Test mode NEVER come up. I have to click on " CHECK FLASHING BUS" TO FORCE PHONE TO LOCAL MODE. AFTER THAT I CAN READ PHONE INFO. AFTER THAT, I CLICK ON UNLOCK AND PHONE PROCESSING TO UNLOCK. HOWEVER imlock Key Cnt 0 Simlock FBUS Cnt 0 Simlock[1,1] State: CLOSED Type: MCC-MNC Data: 50506F Simlock[2,1] State: CLOSED Type: MCC-MNC Data: 50599F Simlock[3,1] State: CLOSED Type: MCC-MNC Data: 50506F Simlock[4,1] State: CLOSED Type: MCC-MNC Data: 50599F Simlock[5,1] State: CLOSED Type: MCC-MNC Data: 00101F Simlock[6,1] State: CLOSED Type: MCC-MNC Data: 00101F Reading Security Block... Security block OK! Determining PA Simlock... Booting RAP... APE_SYSTEM_ASIC_ID: 24200705 APE_ASIC_MODE_ID: 00 APE_PUBLIC_ID: 154989EEF77CF48E1CA6491DF3C4FA53E911CB71 APE_ROOT_KEY_HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000 CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103 CMT_EM_ASIC_ID: 00000295 CMT_EM_ASIC_ID: 00000B22 CMT_PUBLIC_ID: 22400105DC740058DC6AC86A28A8C1C8E202A9D5 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE CMT_ROM_ID: A8C1D6713E691FF8 RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5 Flashbus Write baud set to 1.0Mbits Flashbus Read baud set to 98Kbits FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR FlashContent[0,CMT]: 00000000000000000000000000000000, NOR FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5 Flashbus Write baud set to 4.0Mbits Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit Box TX2 Data Pin set to: Service Pin 3 Box VPP disabled Internal CMT Phone VPP Enabled PAPUBKEYS Hash for CMT: 25129A39D9A3B031CA0124E1E90F5A17ED3EFC89 APE Boot skipped on user request Restarting MCU... Determined PA Simlock: PA_SL Checking for Rootkey Hash support... Restarting MCU... Booting RAP... APE_SYSTEM_ASIC_ID: 24200705 APE_ASIC_MODE_ID: 00 APE_PUBLIC_ID: 154989EEF77CF48E1CA6491DF3C4FA53E911CB71 APE_ROOT_KEY_HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000 CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103 CMT_EM_ASIC_ID: 00000295 CMT_EM_ASIC_ID: 00000B22 CMT_PUBLIC_ID: 22400105DC740058DC6AC86A28A8C1C8E202A9D5 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE CMT_ROM_ID: A8C1D6713E691FF8 RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5 Flashbus Write baud set to 1.0Mbits Flashbus Read baud set to 98Kbits Exploiting - running preloader... Preloader running OK, Running Custom Loader... Custom loader running OK! Working... Received Security Block OK ! Writing Security Block... BB5 Unlock Failed -> Phone not detected (FBUS) THE REASON IS PHONE IS NOT STABLE ON LOCAL MODE SO IT CAN NOT UNLOCK ANYMORE. PLEASE HELP ME ANY IDEA THANKS TOMMY[/QUOT Bro,Try to change the value of BSI on TMA adaptor.If the phone can not go into local mode,you can't unlock it.[ or remove camera and try again]

06-17-2009, 05:11	#3 (permalink)
tommyvo Freak Poster Join Date: May 2008 Posts: 351 Member: 771272 Status: Offline Thanks Meter: 8	thank you! I did change TMA adaptor, however local mode is still not come up. WHY IT SO HARD TO GET LOCAL MODE FOR NOKIA N95 AND Nokia N95 8GB? I GOT ANYTHING ( TX2 ADAPTOR + TMA ADAPTOR+ GOOD 7 PIN CABLE), HOWEVER I CAN NOT UNLOCK THESE PHONE WITH CYCLONE . ANY IDEA OR ANY SOLUTION TO GET LOCAL EASIER. THANK YOU

06-17-2009, 06:13	#4 (permalink)
moulnisky No Life Poster Join Date: Jan 2009 Location: England Age: 59 Posts: 17,681 Member: 947561 Status: Offline Thanks Meter: 14,053	Is the version of the TMA adapter with the USB cable? is this cable connected to a free usb port of your computer or to a good powered hub or t a good USB charger? Are you kepint the dummy battery and the mobile well fit each other using an elastic band or some other system?. BR Alex

06-17-2009, 06:45	#5 (permalink)
tommyvo Freak Poster Join Date: May 2008 Posts: 351 Member: 771272 Status: Offline Thanks Meter: 8	yes, TMA adaptor come with USB. do I need connect this usb to computer? What you meant: " Are you kepint the dummy battery and the mobile well fit each other using an elastic band or some other system?." ----> I really not understand these. Please expalain for me. thank you Tommy

06-17-2009, 06:46	#6 (permalink)
marekom Freak Poster Join Date: Nov 2005 Location: Slovakia Posts: 170 Member: 196497 Status: Offline Thanks Meter: 54	Wait for update cyclone box

06-17-2009, 08:56	#9 (permalink)
UnlockingPoint Freak Poster Join Date: May 2009 Location: UK Posts: 296 Member: 1033807 Status: Offline Thanks Meter: 71	thats very simple its really common problem ure cable is not ok it identifies ok but cannot unlock or flash the phone change ure cable problem will b solved insh*****

06-17-2009, 09:16	#10 (permalink)
Avantha Freak Poster Join Date: Mar 2006 Posts: 159 Member: 239451 Status: Offline Thanks Meter: 5	Connect the TMA USB cable to computer and change the dip switch to 5.1k,then it will go to local mode.

06-17-2009, 10:08	#11 (permalink)
billgetas Junior Member Join Date: Jul 2008 Posts: 11 Member: 815805 Status: Offline Thanks Meter: 0	test whith power the box or the phone y have same problem whit mt-box.....

06-17-2009, 10:52	#12 (permalink)
NADEEM GONDAL No Life Poster Join Date: Aug 2007 Location: England Posts: 3,691 Member: 575900 Status: Offline Thanks Meter: 3,177	for newer Rapido i recommend...with TMA external Power or Modification Inside for usb power