POST ALL QUESTIONS ABOUT BRUTEFORCE SOFTWARE and HARDWARE ONLY HERE

[Pufi164]

Hy!


Is this normal?
I can do something to stay cool?????

2x Sapphire 7970

1GPU 79c
2GPU 76c
Speed.GPU.#1.: 3193.8M/s
Speed.GPU.#2.: 3187.5M/s
Speed.GPU.#*.: 6381.3M/s

Driver 12.3

GPU-Loops: 1024
GPU-Accel: 160
Password lengths range: 15 - 15
Platform: AMD compatible platform found
Watchdog: Temperature limit set to 90c
Device #1: Tahiti, 2048MB, 1Mhz, 32MCU
Device #2: Tahiti, 2048MB, 1Mhz, 32MCU
[s]tatus [p]ause [r]esume [q]uit =>
Status.......: Cracked
Hash.Target..: 36b1e2943819de93b46243ec305e25467f52edd8:003534020 488342600
Hash.Type....: SL3
Time.Running.: 1 min, 1 sec
Time.Left....: 9 hours, 46 mins
Plain.Mask...: ?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1
Plain.Text...: ********0004020606060805050707
Plain.Length.: 15
Progress.....: 775590017843200/1000000000000000 (77.56%)
Speed.GPU.#1.: 3193.8M/s
Speed.GPU.#2.: 3187.5M/s
Speed.GPU.#*.: 6381.3M/s
HWMon.GPU.#1.: 89% GPU, 75c Temp
HWMon.GPU.#2.: 89% GPU, 75c Temp

[moulnisky]

remove "auto" from the fan control and move the slider to 100%
as well move the power limit slider to right completely: your cards are working as they are at 800 mhz

BR

Alex

[elgus11]

Hi I need to chance my laptop and Im thinking get one to start to use sl3 bruteforce unlock, I need more the mobility at lap that a Pc, my question is Can I really use this lap to do bruteforce unlock without burn it? or if pretty hard use bruteforce in a laptop and I need to save more money and buy a PC to start sl3 unlock?
the specs of laptop are in the next link
HP Pavilion dv7-6c90us Entertainment Notebook PC | HP® Official Store

BR.
Elgus11

[nelson_sanchez1]

No laptop no have power for this will take much time for calculate a code

[ryumahon]

you'll burn your laptop if ever! hihihi!

[meido one]

@Moulnisky I am always haveing a weird problems, would you mind helping out?
i have two ATI Cards, ATI original, and Sapphire HD5970. when i plug them together, one of my cards throttle back and its show up in afterburner like zigzag. and sometime one of the Gpu goes up to 100% of load. and what make me confuse is when i plug one card by it self. it works very well. i tested both for 6hrs.
here is what i did.
1. i changed the power supply. problem same
2. changed the motherboard. problem same
3. change the cpu. problem same
4. changed the RAM. problem same
and even i flashed bios for both. same file.
only one thing i didn't do. Change the whole computer and that will make sense for sure.

[dragon7]

Lover the ram speed of the cards to minimum. You can do this by a slider in the afterburner (left part of the main window). Good luck! Post back the result.

[moulnisky]

Originally Posted by meido one

@Moulnisky I am always haveing a weird problems, would you mind helping out?
i have two ATI Cards, ATI original, and Sapphire HD5970. when i plug them together, one of my cards throttle back and its show up in afterburner like zigzag. and sometime one of the Gpu goes up to 100% of load. and what make me confuse is when i plug one card by it self. it works very well. i tested both for 6hrs.
here is what i did.
1. i changed the power supply. problem same
2. changed the motherboard. problem same
3. change the cpu. problem same
4. changed the RAM. problem same
and even i flashed bios for both. same file.
only one thing i didn't do. Change the whole computer and that will make sense for sure.

You should check if all the gpus are at the same speed and no gpus goes ever over 90c°: these 2 are normally the reason of the gpu load trottle.
As well check in your power supply if you distributed the power load well between the rails

BR

Alex

[meido one]

Originally Posted by dragon7

Lover the ram speed of the cards to minimum. You can do this by a slider in the afterburner (left part of the main window). Good luck! Post back the result.

always i do that. it is 500 mb
Thank You

[meido one]

Originally Posted by moulnisky

You should check if all the gpus are at the same speed and no gpus goes ever over 90c°: these 2 are normally the reason of the gpu load trottle.
As well check in your power supply if you distributed the power load well between the rails

BR

Alex

all gpus synced to the same speed, 900MHZ. and i am using watercooling, Temp always under 60 degree. i have two power supply 1200 watt, 1600 watt.
Thank You

[moulnisky]

Originally Posted by meido one

all gpus synced to the same speed, 900MHZ. and i am using watercooling, Temp always under 60 degree. i have two power supply 1200 watt, 1600 watt.
Thank You

as parameter do you use -n 200 ?
vcore 1137?

BR

Alex

[meido one]

Originally Posted by moulnisky

as parameter do you use -n 200 ?
vcore 1137?

BR

Alex

i am using n160 a little bit lite than n800, n400, i tried, VCORE IS 1149

[moulnisky]

Are you runing as well in active mode gpuz?

BR

Alex

[meido one]

NO, if gpuz is active that will make the load throttle back, so i don't use it.

[akh84]

hi,
What do you think of this configuration for BF sl3
cost = 900€
thanks

case NZXT Phantom 

Corsair GS800 - Gaming Series 800W

HDD 3.5 Western Digital Caviar Black SATA III 6 Gb/s - 1 To - 64 Mo

G.Skill Kit Extreme3 4 x 2 Go PC12800 Ripjaws CAS 7

Antec Kühler H2O 920

INTEL Core i7 950 - 3.06 Ghz - Socket LGA1366

Asus P6X58D-E - Chipset Intel X58 - Socket LGA1366

graphics card ASUS EAH6990/3DI4S/4GD5 - Radeon HD 6990 - 4096 Mo - PCI-Express

Gpu Accelero Twin Turbo 6990