Cyclone NO TP - USB ONLY Rooting for Lumia 800, 800C Released ;) - GSM-Forum

karwos · 08-06-2013, 21:19

Hi everyone

- Added WORLD FIRST, USB ONLY, NO TP ROOTING FOR RM-801 LUMIA 800
- Added WORLD FIRST, USB ONLY, NO TP ROOTING FOR RM-802 LUMIA 800C

All NOKIA DLOAD OSBL loaders are supported (even latest one!)

Instructions:
1. Run Cyclone, it will be auto-updated
2. Update your Box Firmware to v2.20
3. Go to WP7 -> Simlocks Tab
4. Select Product and click ROOT!

It should go this way:

Quote:

Lumia No TP Root Procedure Started...

If phone is alive, It will be automatically swithced to OSBL mode.
If software can't switch to OSBL mode, or phone is generally DEAD do folllowing:

1. Turn OFF device, wait 15 seconds afterwards
2. Eject USB cable, wait 10 seconds
3. Press and hold Volume-UP button
4. Insert USB Cable. OSBL should be booted.

Booting CMT...
[Urządzenie kompozytowe USB]: WinUSB Port opened OK!
[Urządzenie kompozytowe USB]: WinUSB Port opened OK!
[Nokia USB Connectivity]: WinUSB Port opened OK!
Switching to RAW Mode...
[Nokia USB Connectivity]: WinUSB Port opened OK!
[Nokia USB Connectivity]: WinUSB Port opened OK!
OSBL Details
Protocol: v1.1
Version: v257.6
Build: 12
Timestamp: 2012-02-17 14:40:05
OSBL Bootloader Ready
USB&UART Tracing set
RSA Signature Calculated for QCB Boot, Writing...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031573
Signer Timestamp: 2011-09-28 15:52:12
Signer S/N: 23
Signer User ID: 10046114
Auth Level: Care
Data Encryption: 0
Image Index: 0
Asic Index: 0
Type: Image Write
Hashtable Parsed OK
Certificate Accepted
[ASIC 0, Storage 4,1] Writing 850.552kB @ 0x000000000007D200
Write taken 0.358s (Average speed: 19462,61kBits/s)
Restoring Modem from BACKUP_RAMFS_IMAGE...
Restore OK
Restarting MCU...
Rooting Finished!

After rooting, Qualcomm Bootloader is installed. That means phone will be detected as Mass Storage Device, and you will have full access to eMMC.

Because patching is not good solution, we will add some good news aswell in next days

However, if you need simlock patching badly you can use some free tools around to patch AMSS (i.e. NSS).

Release Notes:
1. Supported products: Cyclone Box Classic, Cyclone Box Reloaded, Cyclone Key
2. Firmware Required v2.20
3. Need No TP Activation, is COMPLETLY FREE for all Cyclone Key users, for rest you need have 60 credits on your account and your box will be automatically activated (credits will not be withdrawn from box anyway, this is just threshold).
4. We also have solution to completly root rest of lumias, including 610, 610nfc, 900, etc... however it will be released ONLY if this solution WILL NOT BE COPIED. If somebody copy solution - it will be kept private.
5. No need new installer, however if you need one, always latest one is here: http://www.**********/CycloneBoxInstaller.exe

Best Regards,
Cyclone Team

.::Gsm-Play::. · 08-06-2013, 21:29

Cyclone team....now flying.........waiting....more.........

moh_boulk17 · 08-06-2013, 21:37

i can can unlock lumia now ???

karwos · 08-06-2013, 21:39

Quote:

Originally Posted by moh_boulk17

i can can unlock lumia now ???

Just root your phone and patch it by NSS for example ...
if you don't like patching, as I do, wait and we will present permanent unlock.

hitech care · 08-06-2013, 21:43

IS there Any chance of Damage of emmc During Root??....

moh_boulk17 · 08-06-2013, 21:43

Quote:

Originally Posted by karwos

Just root your phone and patch it by NSS for example ...
if you don't like patching, as I do, wait and we will present permanent unlock.

i not understand u ? now if i do this root my phone unlock network ?

karwos · 08-06-2013, 21:52

Quote:

Originally Posted by HITECH GALLERY

IS there Any chance of Damage of emmc During Root??....

Rooting procedure is SAFE. However, after rooting new MMC device will be detected, and Windows will ask you to format it. If you click yes, MMC will be erased. Don't do it, and you're safe.

SpoOnx · 08-06-2013, 22:01

nice update, waiting for others lumia´s to activate my cyclone reload edition

adnanali · 08-06-2013, 22:57

ox Firmware: Cyclone Main Application v02.20, (Aug 6 2013 20:31:40, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2012
Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
Box Serial Number:xxxxxxx
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk32
Initializing security card...
Card Serial Number: Dxxxxxxx
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 5.00v PASSED
MCU Voltage 3.27v PASSED
Core Voltage 1.80v PASSED
VBAT Voltage 0.00v PASSED
VBAT Voltage 4.96v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
Internal Box VPP Enabled
VPP Voltage 4.88v PASSED
Box VPP disabled
VPP Voltage 0.02v PASSED
External Box VPP Enabled
VPP Voltage 0.00v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE

Code:

XGold/Blackberry Service Running, Counter: 100
Lumia No TP is NOT ACTIVATED! (1)

karwos · 08-06-2013, 23:09

Quote:

Originally Posted by adnanali

ox Firmware: Cyclone Main Application v02.20, (Aug 6 2013 20:31:40, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2012
Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
Box Serial Number:xxxxxxx
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk32
Initializing security card...
Card Serial Number: Dxxxxxxx
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage5.00vPASSED
MCU Voltage3.27vPASSED
Core Voltage1.80vPASSED
VBAT Voltage0.00vPASSED
VBAT Voltage4.96vPASSED
Box VPP disabled
VPP Voltage0.04vPASSED
Internal Box VPP Enabled
VPP Voltage4.88vPASSED
Box VPP disabled
VPP Voltage0.02vPASSED
External Box VPP Enabled
VPP Voltage0.00vFAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE

Code:

XGold/Blackberry Service Running, Counter: 100
Lumia No TP is NOT ACTIVATED! (1)

Check your credit count in server tools tab. Once refilled to 60, update your box again.

kaisak · 08-06-2013, 23:10

Quote:

Originally Posted by adnanali

ox Firmware: Cyclone Main Application v02.20, (Aug 6 2013 20:31:40, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2012
Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
Box Serial Number:xxxxxxx
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk32
Initializing security card...
Card Serial Number: Dxxxxxxx
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 5.00v PASSED
MCU Voltage 3.27v PASSED
Core Voltage 1.80v PASSED
VBAT Voltage 0.00v PASSED
VBAT Voltage 4.96v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
Internal Box VPP Enabled
VPP Voltage 4.88v PASSED
Box VPP disabled
VPP Voltage 0.02v PASSED
External Box VPP Enabled
VPP Voltage 0.00v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE

Code:

XGold/Blackberry Service Running, Counter: 100
Lumia No TP is NOT ACTIVATED! (1)

Please paste Your SN to check Your credit amount- this service is for FREE to Cyclone Key edition, but when You have Classic or Reloaded You need have on account 60 credits for activate Lumia No TP.

RNC_EBM · 08-06-2013, 23:11

Quote:

Originally Posted by karwos

3. Need No TP Activation, is COMPLETLY FREE for all Cyclone Key users, for rest you need have 60 credits on your account and your box will be automatically activated (credits will not be withdrawn from box anyway, this is just threshold).

Best Regards,
Cyclone Team

i have 59 Credits left.

any consideration to ACTIVATE it

Quote:

Lumia No TP is NOT ACTIVATED! (1)

Box Serial Number: C00020C7
Card Serial Number: D8000316

br

[ R ] [ N ] [ C ] [ _ ] [ E ] [ B ] [ M ]

[ iPhone5-7.0 Beta 5 - FU / iPhone4s-6.1.3 - FU ]

adnanali · 08-06-2013, 23:17

Quote:

Originally Posted by kaisak

Please paste Your SN to check Your credit amount- this service is for FREE to Cyclone Key edition, but when You have Classic or Reloaded You need have on account 60 credits for activate Lumia No TP.

Box Serial Number: C0000138
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk32
Initializing security card...
Card Serial Number: XXXXXX
Sir i want to with draw from my" XPERIA ACCOUNT " PLEASE ANY POSSIBILITY

karwos · 08-06-2013, 23:18

Quote:

Originally Posted by RNC_EBM

i have 59 Credits left.

any consideration to ACTIVATE it

Box Serial Number: C00020C7
Card Serial Number: D8000316

br

[ R ] [ N ] [ C ] [ _ ] [ E ] [ B ] [ M ]

[ iPhone5-7.0 Beta 5 - FU / iPhone4s-6.1.3 - FU ]

Send me your box serial, i will activate it as a gift

And post your successfull root stories

RNC_EBM · 08-06-2013, 23:20

Quote:

Originally Posted by karwos

Send me your box serial, i will activate it as a gift

And post your successfull root stories

Box Serial Number: C00020C7
Card Serial Number: D8000316

THANK YOU VERY MUCH.

br

[ R ] [ N ] [ C ] [ _ ] [ E ] [ B ] [ M ]

[ iPhone5-7.0 Beta 5 - FU / iPhone4s-6.1.3 - FU ]

08-06-2013, 22:57	#9 (permalink)
adnanali No Life Poster Join Date: Dec 2005 Location: Gujjar AJK Posts: 2,074 Member: 207308 Status: Offline Thanks Meter: 471	why not Activated please cleared ox Firmware: Cyclone Main Application v02.20, (Aug 6 2013 20:31:40, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2012 Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs Box Serial Number:xxxxxxx HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk32 Initializing security card... Card Serial Number: Dxxxxxxx Card Firmware Revision: 0109 Card is activated Box is activated Started box selftests procedure USB Voltage 5.00v PASSED MCU Voltage 3.27v PASSED Core Voltage 1.80v PASSED VBAT Voltage 0.00v PASSED VBAT Voltage 4.96v PASSED Box VPP disabled VPP Voltage 0.04v PASSED Internal Box VPP Enabled VPP Voltage 4.88v PASSED Box VPP disabled VPP Voltage 0.02v PASSED External Box VPP Enabled VPP Voltage 0.00v FAILED - IGNORED - Probably power supply is not connected Box VPP disabled All box selftests passed! Super DCT4 Activation: TRUE Code: XGold/Blackberry Service Running, Counter: 100 Lumia No TP is NOT ACTIVATED! (1)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-06-2013, 21:29	#2 (permalink)
.::Gsm-Play::. No Life Poster Join Date: Jul 2011 Location: Great India Posts: 1,646 Member: 1615596 Status: Offline Sonork: 100.160704? Thanks Meter: 759	Cyclone team....now flying.........waiting....more.........

08-06-2013, 21:37	#3 (permalink)
moh_boulk17 No Life Poster Join Date: Jan 2006 Location: algeria Posts: 1,476 Member: 217891 Status: Offline Thanks Meter: 237	i can can unlock lumia now ???

08-06-2013, 21:43	#5 (permalink)
hitech care No Life Poster Join Date: Nov 2012 Location: Ek India Happy Wala.. :-) Posts: 2,828 Member: 1834832 Status: Offline Thanks Meter: 1,450	IS there Any chance of Damage of emmc During Root??....

08-06-2013, 22:01	#8 (permalink)
SpoOnx Registered User Join Date: Mar 2006 Location: Portugal Age: 41 Posts: 361 Member: 246072 Status: Offline Thanks Meter: 96	nice update, waiting for others lumia´s to activate my cyclone reload edition