GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Cyclonebox (https://forum.gsmhosting.com/vbb/f528/)
-   -   Put in this thread all successfull story with Cyclone-box (https://forum.gsmhosting.com/vbb/f528/put-thread-all-successfull-story-cyclone-box-709123/)

NADEEM GONDAL 03-29-2009 09:24

Put in this thread all successfull story with Cyclone-box
 
2600c successfully flashed

Code:

Initializing FBUS...
All initialized - Ready to work
Processing pre-flash tasks...
Pre-flash tasks finished
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm340__05.22.mcusw, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2208 @ 0x01000000, Samsung, SectorSize: 128kB, Ext: 00009121
FlashChip[1]: 0x00EC2208 @ 0x02000000, Samsung, SectorSize: 128kB, Ext: 00009121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2208 (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 846512A58D78F69B88074F0AE0
MSID-Plain: 2C40BAE9004C313DA8000000
FAID-Crypted: BF4D3163FE5588FC5BE1D8AE
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x01000000-0x0101FFFF]
Erasing NOR Region [0x01020000-0x01C3FFFF]
Erase taken 45.736s
Writing 344 blocks...
All blocks written OK! Time taken 382.260s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm340__05.22.image_ei, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2208 @ 0x01000000, Samsung, SectorSize: 128kB, Ext: 00009121
FlashChip[1]: 0x00EC2208 @ 0x02000000, Samsung, SectorSize: 128kB, Ext: 00009121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2208 (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 84E532F723441EF8FD29D1B426
MSID-Plain: D26EBAF1004C313DAA000610
FAID-Crypted: 23DA5045D918BA2ED5CA78CC
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x02000000-0x02DBFFFF]
Erasing NOR Region [0x02DC0000-0x02F9FFFF]
Erase taken 46.226s
File Sector Size: 128kB, Flash Chip Sector Size: 128kB
CNT Convertion not needed
Writing 216 blocks...
All blocks written OK! Time taken 94.907s
Terminating flash session
Extracting Content Package...
CP Extract Failed -> CP Server not exists
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm340__05.22.ppm_ei, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2208 @ 0x01000000, Samsung, SectorSize: 128kB, Ext: 00009121
FlashChip[1]: 0x00EC2208 @ 0x02000000, Samsung, SectorSize: 128kB, Ext: 00009121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2208 (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.00V
MSID-Crypted: 84DAB6B25887D312D38E5057E3
MSID-Plain: 3E4EBAE9004C313DA8000000
FAID-Crypted: 504B461EB53F428459579FBE
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01C40000-0x01FFFFFF]
Erase taken 11.857s
Writing 85 blocks...
All blocks written OK! Time taken 80.536s
Terminating flash session
Box VPP disabled
Processing post-flash tasks...
Setting Factory Defaults...
Factory defaults OK

;)

green ghost 03-29-2009 14:22

7390 ALIVE USB FLASHING DONE

Code:

Processing pre flash tasks...
Read certificates operation not possible for USB bus
Backing up simlock...
[BB5 NMWCD]: Found 1 active devices
[Nokia 7390 USB Generic]: Opening Connection
[Nokia 7390 USB Generic]: Port opened OK!
Starting PM read in range 308-308...
[BB5 NMWCD]: Found 1 active devices
[Nokia 7390 USB Generic]: Opening Connection
[Nokia 7390 USB Generic]: Port opened OK!
[308] Reading 9 records
[308,0] Reading 1 bytes
[308,1] Reading 8192 bytes
[308,3] Reading 1 bytes
[308,4] Reading 1 bytes
[308,5] Reading 10 bytes
[308,6] Reading 1 bytes
[308,7] Reading 1 bytes
[308,8] Reading 1 bytes
[308,9] Reading 40 bytes
PM Read OK, Time taken 0.625s
Simlock backup OK
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Selecting USB Flashing Method...
[BB5 ADL Server]: Found 0 active devices
[BB5 ADL Server]: Not Found!
[BB5 NMWCD]: Found 1 active devices
[Nokia 7390 USB Generic]: Opening Connection
[Nokia 7390 USB Generic]: Port opened OK!
Proceeding with Alive USB Mode
CMT FlashChip:  0x00EC220C69210000, Samsung
IMEI:    353639016719187
CMT Public ID:  0F900110FFC601548D643461170B00C6A469E756
ROOTKEY Hash for CMT:  BAF3A9C3DBFA8454937DB77F2B8852B1
PAPUBKEYS Hash for CMT:  85566E3CDC7A0435094EFA6CBB2E9DF0D74B11EF
Sending CMT UPDAPP Certificate and Data...
Waiting for ADL Server Startup...
[BB5 ADL Server]: Found 1 active devices
[Nokia BB5 ADL Loader USB Generic]: Opening Connection
[Nokia BB5 ADL Loader USB Generic]: Port opened OK!
ADL Server Startup Confirmed OK!
Processing rm140__004.510.mcusw (CMT)...
rm140__004.510.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Started flash erase
EraseArea[0,CMT]: 0x00000000-0x000202BF, NOR
EraseArea[0,CMT]: 0x00020300-0x000252FF, NOR
EraseArea[0,CMT]: 0x00020000-0x0007FFFF, NOR
EraseArea[0,CMT]: 0x00080000-0x000DFFFF, NOR
EraseArea[0,CMT]: 0x00200000-0x0037FFFF, NOR
EraseArea[0,CMT]: 0x00380000-0x0143DFFF, NOR
EraseArea[0,CMT]: 0x0143E000-0x0143EFFF, NOR
EraseArea[0,CMT]: 0x0143F000-0x0143FFFF, NOR
EraseArea[0,CMT]: 0x00100000-0x001FFFFF, NOR
Erase taken 50.297s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Writing CMT PMM_CONF Certificate...
Writing CMT SBIF_CONF Certificate...
Programming Status OK!
All blocks written OK! Time taken 125.422s
Processing rm140__04.51.ppm_b (CMT)...
rm140__04.51.ppm_b, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Started flash erase
EraseArea[0,CMT]: 0x01440000-0x01A3FFFF, NOR
Erase taken 13.812s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 34.125s
Processing rm140__004.51.image_b (CMT)...
rm140__004.51.image_b, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Started flash erase
EraseArea[0,CMT]: 0x02000000-0x03FDFFFF, NOR
EraseArea[0,CMT]: 0x01C80000-0x01FDFFFF, NOR
Erase taken 102.125s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 48.859s
Restarting CMT...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
Factory defaults OK
Reading info...
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
Failed to read info -> Phone not detected
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
;)


fagamon 03-30-2009 23:23

Unlock Nokia 1208

Code:

Phone is in Local Mode
MCU Version V 5.32
MCU Date 05-18-08
Product RH-106
Manufacturer (c) NMP
IMEI 01170100XX288XX
Asic 11
HW Signature 6A2751501FDC6F32
Simlock Server SIMLOCK SERVER
Simlock Key 7321030000000000
Simlock Profile 8000000000010002
Simlock Aux 000B0000
Simlock IMEI 000001170100XX28XXX0
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Selecting unlock method...
Search in: C:\Archivos de programa\Cyclone Box\UnlockData\
Searching for: RH-106_V 5.32.unlock_img
Asking card to sign HW Signature...
Signed OK (F49833DC2BDC9558D109D16C4ABD3622EE0C45F0)
Writing patch file...
Booting UPP...
UPP ID: 2292 [HW_UNKNOWN]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2268 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2268 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 84B0A08B8BD80CA43E295E82AD
MSID-Plain: 3E4EBAE9004702F9AA000000
FAID-Crypted: 5144158B1021817CA75D2813
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x01000000-0x0101FFFF]
Erasing NOR Region [0x01140000-0x0115FFFF]
Erase taken 1.906s
Writing 17 blocks...
All blocks written OK! Time taken 1.562s
Terminating flash session
Box VPP disabled
Writing SP...
New SP Accepted OK!
Phone unlocked OK!


NADEEM GONDAL 04-12-2009 16:25

2680c unlocked
 
Code:


MCU Version        V 04.91
MCU Date        03-09-08
Product                RM-392
Manufacturer        (c) Nokia           
IMEI                353198034310032
Asic                11
HW Signature        BD920D7D3D6DC55F
Simlock Server        SIMLOCK SERVER
Simlock Key        0010100000000000
Simlock Profile        800000000003000B
Simlock Aux        000B5555
Simlock IMEI        00553531980343100300
Simlock Key Cnt        0
Simlock FBUS Cnt        0
Selecting unlock method...
Search in: C:\Program Files\Cyclone Box\UnlockData\
Searching for: RM-392_V 04.91.unlock_img
Asking card to sign HW Signature...
Signed OK (96271A699FF1E29F9224D0F30B51491523153108)
Writing patch file...
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x0020883C @ 0x01000000, ST, SectorSize: 128kB, Ext: 00009321
FlashChip[1]: 0x0020883C @ 0x02000000, ST, SectorSize: 128kB, Ext: 00009321
Signature: AD7EB61B00FF10400000000000000000
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x0020883C (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x01000000-0x0101FFFF]
Erasing NOR Region [0x01080000-0x0109FFFF]
Erase taken 2.314s
Writing 10 blocks...
All blocks written OK! Time taken 1.802s
Terminating flash session
Box VPP disabled
Writing SP...
New SP Accepted OK!
Phone unlocked OK!

;)


oMeR_Rasheed 04-13-2009 14:04

N95 8gb falshind whit cayclone box
 
Code:

Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.6634
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v1.00, (Mar 13 2009 20:30:35, gcc-4.2.2, RTOS V5.1.0), Type: Signed Production Application
Box Serial Number: C0000156
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk32
Initializing security card...
Card Serial Number: D10000AC
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 5.09v PASSED
MCU Voltage 3.29v PASSED
Core Voltage 1.83v PASSED
VBAT Voltage 0.43v PASSED
VBAT Voltage 4.82v PASSED
Box VPP disabled
VPP Voltage 0.00v PASSED
Internal Box VPP Enabled
VPP Voltage 5.01v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
External Box VPP Enabled
VPP Voltage 0.00v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Initializing FBUS...
All initialized - Ready to work
Processing pre flash tasks...
Backing up certificates...
Booting RAP...
APE_SYSTEM_ASIC_ID:  24200705
APE_ASIC_MODE_ID:  00
APE_PUBLIC_ID:  C3D21D2FCC058EB4958FC3E48EA0A3C845A01326
APE_ROOT_KEY_HASH:  BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:  000000010000022600010006400C192101021103
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  03B000083D5C005262BEE92D4F41BE0BBA0E1898
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:  A8C1D6713E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
omap2420_m1_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.41.0, Algo: BB5
FlashChip[0,APE]: 0x00EC004000220000, Samsung, NAND
Requested Algorithm: OMAP2420 UNISTORE-II-1.5.1 ALG (APE)
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
teflon_sam_nand_xsr151_m1.fg, Type: Algorithm, Rev: 0.1.57.0, Algo: OMAP2420 UNISTORE-II-1.5.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
CMT NPC Ok
CMT HWC Ok
CMT CCC Ok
CMT R&D Ok
CMT VARIANT Ok
CMT PAPUBKEYS Ok
CMT KEYS Ok
APE NPC Ok
APE HWC Ok
APE CCC Ok
APE R&D Ok
APE VARIANT Not Found
APE PAPUBKEYS Ok
APE KEYS Ok
Restarting MCU...
Read all certificates finished
Certificates backup thread finished, continuing...
Backing up simlock...
Starting PM read in range 308-308...
[308] Reading 7 records
[308,0] Reading 1 bytes
[308,1] Reading 8192 bytes
Failed to read PM -> Failed to read PM Record 308,1
Simlock backup OK
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing RM-320_20.0.016_PR.C0R (CMT)...
Booting RAP...
APE_SYSTEM_ASIC_ID:  24200705
APE_ASIC_MODE_ID:  00
APE_PUBLIC_ID:  C3D21D2FCC058EB4958FC3E48EA0A3C845A01326
APE_ROOT_KEY_HASH:  BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:  000000010000022600010006400C192101021103
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  03B000083D5C005262BEE92D4F41BE0BBA0E1898
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:  A8C1D6713E691FF8
RM-320_20.0.016_PR.C0R, Type: Flash Image, Algo: BB5, XSR 1.5, BB5, OMAP2420 UNISTORE-II-1.5.1 ALG
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00080000-0x007CFD95, NOR
EraseArea[0,CMT]: 0x00000000-0x0005FFFF, NOR
EraseArea[0,CMT]: 0x00880000-0x00FDFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 32.734s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 28.453s
Restarting MCU...
Processing RM-320_20.0.016_PR.C0R (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID:  24200705
APE_ASIC_MODE_ID:  00
APE_PUBLIC_ID:  C3D21D2FCC058EB4958FC3E48EA0A3C845A01326
APE_ROOT_KEY_HASH:  BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:  000000010000022600010006400C192101021103
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  03B000083D5C005262BEE92D4F41BE0BBA0E1898
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:  A8C1D6713E691FF8
RM-320_20.0.016_PR.C0R, Type: Flash Image, Algo: BB5, XSR 1.5, BB5, OMAP2420 UNISTORE-II-1.5.1 ALG
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
omap2420_m1_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.41.0, Algo: BB5
FlashChip[0,APE]: 0x00EC004000220000, Samsung, NAND
Requested Algorithm: OMAP2420 UNISTORE-II-1.5.1 ALG (APE)
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
teflon_sam_nand_xsr151_m1.fg, Type: Algorithm, Rev: 0.1.57.0, Algo: OMAP2420 UNISTORE-II-1.5.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x00000200-0x0000AFFF, NAND
EraseArea[0,APE]: 0x0000B800-0x000AFFFF, NAND
EraseArea[0,APE]: 0x00000000-0x00001000, NAND
EraseArea[0,APE]: 0x0000D800-0x0000EA00, NAND
EraseArea[0,APE]: 0x00080000-0x000BFFFF, NAND
EraseArea[0,APE]: 0x000E0000-0x0045FFFF, NAND
EraseArea[0,APE]: 0x004C0000-0x0073FFFF, NAND
EraseArea[0,APE]: 0x00A40000-0x06F3FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 0.328s
Writing all blocks...
Writing APE X-LOADER Certificate...
Writing APE KEYS Certificate...
Writing APE PRIMAPP Certificate...
Writing APE X-LOADER Certificate...
Writing APE KEYS Certificate...
Writing APE PRIMAPP Certificate...
Writing APE SOS+XZIP Certificate...
Writing APE PASUBTOC Certificate...
Writing APE PAPUBKEYS Certificate...
Writing APE SOS+UPDAPP Certificate...
Writing APE SOS+CORE Certificate...
Writing APE SOS+ROFS Certificate...
Programming Status OK!
All blocks written OK! Time taken 99.188s
Restarting MCU...
Processing RM-320_20.0.016_PR.v22 (CMT)...
Processing RM-320_20.0.016_PR.v22 (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID:  24200705
APE_ASIC_MODE_ID:  00
APE_PUBLIC_ID:  C3D21D2FCC058EB4958FC3E48EA0A3C845A01326
APE_ROOT_KEY_HASH:  BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:  000000010000022600010006400C192101021103
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  03B000083D5C005262BEE92D4F41BE0BBA0E1898
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:  A8C1D6713E691FF8
RM-320_20.0.016_PR.v22, Type: Flash Image, Algo: BB5, OMAP2420 UNISTORE-II-1.5.1 ALG, BB5, XSR 1.5
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
omap2420_m1_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.41.0, Algo: BB5
FlashChip[0,APE]: 0x00EC004000220000, Samsung, NAND
Requested Algorithm: OMAP2420 UNISTORE-II-1.5.1 ALG (APE)
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
teflon_sam_nand_xsr151_m1.fg, Type: Algorithm, Rev: 0.1.57.0, Algo: OMAP2420 UNISTORE-II-1.5.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x05140000-0x06F3FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 0.78s
Writing all blocks...
Writing APE SOS+ROFX Certificate...
Programming Status OK!
All blocks written OK! Time taken 24.625s
Restarting MCU...
Processing RM320_20.0.008_018_xxx_U03_uda.fpsx (CMT)...
Processing RM320_20.0.008_018_xxx_U03_uda.fpsx (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID:  24200705
APE_ASIC_MODE_ID:  00
APE_PUBLIC_ID:  C3D21D2FCC058EB4958FC3E48EA0A3C845A01326
APE_ROOT_KEY_HASH:  BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:  000000010000022600010006400C192101021103
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  03B000083D5C005262BEE92D4F41BE0BBA0E1898
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:  A8C1D6713E691FF8
RM320_20.0.008_018_xxx_U03_uda.fpsx, Type: Flash Image, Algo: BB5, OMAP2420 UNISTORE-II-1.5.1 ALG, BB5, XSR 1.5
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
omap2420_m1_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.41.0, Algo: BB5
FlashChip[0,APE]: 0x00EC004000220000, Samsung, NAND
Requested Algorithm: OMAP2420 UNISTORE-II-1.5.1 ALG (APE)
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
teflon_sam_nand_xsr151_m1.fg, Type: Algorithm, Rev: 0.1.57.0, Algo: OMAP2420 UNISTORE-II-1.5.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Started group flash erase
EraseArea[0,APE]: 0x06F40000-0x0F87FFFF, NAND
Erase Certificate: SOS-USER (APE)
Waiting 320s for erasure finish...
Erase taken 0.656s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 24.641s
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version V 06wk41v51.3
MCU Date 13-02-08
Product  RM-320
Manufacturer (c) Nokia
IMEI  12345610654321?
IMEI Spare 1A32541660452301
IMEI SV  1332541660452301F4000000
PPM  20.0.016j20.0.01622.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256r$RM320_20.0.008_018_xxx_U03, rRM320_020_000_M011 , $RM320_20.0.008_018_xxx_U03, RM320_020_000_M011 ,
CNT  RM320_20.0.008_018_xxx_U03, rRM320_020_000_M011 ,
PSN  0
PSD  0000000000000000
LPSN  0
APE SW  20.0.016
APE Variant 20.0.01622.01
APE Test  rm320_eno_2007wk45v0.020
APE HW  1
APE ADSP 256
APE BT  HCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.
RETU  15
TAHVO  22
AHNE  11
HW  20.0.016j20.0.01622.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256r$RM320_20.0.008_018_xxx_U03, rRM320_020_000_M011 , $RM320_20.0.008_018_xxx_U03, RM320_020_000_M011 ,
PCI  i20.0.016j20.0.01622.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256r$RM320_20.0.008_018_xxx_U03, rRM320_020_000_M011 , $RM320_20.0.008_018_xxx_U03, RM320_020_000_M011 ,
UEM  20.0.016j20.0.01622.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256r$RM320_20.0.008_018_xxx_U03, rRM320_020_000_M011 ,
UPP  20.0.016j20.0.01622.01k rm320_eno_2007wk45v0.020qLGHCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.n1o256r$RM320_20.0.008_018_xxx_U03, rRM320_020_000_M011 ,
RFIC  17141715
Failed to read info -> Failed to read extended info
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!

B.R
SHERRY MOBILES

mohamed75 04-13-2009 14:34

N95 8g flashed successfully with cyclonebox
 
FLASHING TIME IS ABOUT 4 MINS
HERE IS THE LOG

Code:

Booting RAP...
APE_SYSTEM_ASIC_ID:        24200705
APE_ASIC_MODE_ID:        00
APE_PUBLIC_ID:                DDAB593DCC45FB0A6554D853AD44579AED384503
APE_ROOT_KEY_HASH:        BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:        000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:                00000295
CMT_EM_ASIC_ID:                00000B22
CMT_PUBLIC_ID:                15600018A8750052A4C87799D922F0204A65D6C2
CMT_ASIC_MODE_ID:        00
CMT_ROOT_KEY_HASH:        CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:                4B9B75103E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
omap2420_m1_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.41.0, Algo: BB5
FlashChip[0,APE]: 0x00EC004000220000, Samsung, NAND
Requested Algorithm: OMAP2420 UNISTORE-II-1.5.1 ALG (APE)
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
teflon_sam_nand_xsr151_m1.fg, Type: Algorithm, Rev: 0.1.57.0, Algo: OMAP2420 UNISTORE-II-1.5.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
CMT NPC Ok
CMT HWC Ok
CMT CCC Ok
CMT R&D Ok
CMT VARIANT Ok
CMT PAPUBKEYS Ok
CMT KEYS Ok
APE NPC Ok
APE HWC Ok
APE CCC Ok
APE R&D Ok
APE VARIANT Not Found
APE PAPUBKEYS Ok
APE KEYS Ok
Restarting MCU...
Read all certificates finished
Certificates backup thread finished, continuing...
Backing up simlock...
Starting PM read in range 308-308...
PM Read OK, Time taken 3.984s
Simlock backup problem -> PM Problem
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing RM-320_31.0.015_PR.C0R (CMT)...
Booting RAP...
APE_SYSTEM_ASIC_ID:        24200705
APE_ASIC_MODE_ID:        00
APE_PUBLIC_ID:                DDAB593DCC45FB0A6554D853AD44579AED384503
APE_ROOT_KEY_HASH:        BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:        000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:                00000295
CMT_EM_ASIC_ID:                00000B22
CMT_PUBLIC_ID:                15600018A8750052A4C87799D922F0204A65D6C2
CMT_ASIC_MODE_ID:        00
CMT_ROOT_KEY_HASH:        CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:                4B9B75103E691FF8
RM-320_31.0.015_PR.C0R, Type: Flash Image, Algo: BB5, XSR 1.5, BB5, OMAP2420 UNISTORE-II-1.5.1 ALG
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00080000-0x007CF385, NOR
EraseArea[0,CMT]: 0x00000000-0x0005FFFF, NOR
EraseArea[0,CMT]: 0x00880000-0x00FDFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 34.625s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 28.688s
Restarting MCU...
Processing RM-320_31.0.015_PR.C0R (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID:        24200705
APE_ASIC_MODE_ID:        00
APE_PUBLIC_ID:                DDAB593DCC45FB0A6554D853AD44579AED384503
APE_ROOT_KEY_HASH:        BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:        000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:                00000295
CMT_EM_ASIC_ID:                00000B22
CMT_PUBLIC_ID:                15600018A8750052A4C87799D922F0204A65D6C2
CMT_ASIC_MODE_ID:        00
CMT_ROOT_KEY_HASH:        CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:                4B9B75103E691FF8
RM-320_31.0.015_PR.C0R, Type: Flash Image, Algo: BB5, XSR 1.5, BB5, OMAP2420 UNISTORE-II-1.5.1 ALG
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
omap2420_m1_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.41.0, Algo: BB5
FlashChip[0,APE]: 0x00EC004000220000, Samsung, NAND
Requested Algorithm: OMAP2420 UNISTORE-II-1.5.1 ALG (APE)
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
teflon_sam_nand_xsr151_m1.fg, Type: Algorithm, Rev: 0.1.57.0, Algo: OMAP2420 UNISTORE-II-1.5.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x00000200-0x0000AFFF, NAND
EraseArea[0,APE]: 0x0000B800-0x000AFFFF, NAND
EraseArea[0,APE]: 0x00000000-0x00000FFF, NAND
EraseArea[0,APE]: 0x0000D800-0x0000E9FF, NAND
EraseArea[0,APE]: 0x00080000-0x000BFFFF, NAND
EraseArea[0,APE]: 0x000E0000-0x0045FFFF, NAND
EraseArea[0,APE]: 0x004C0000-0x0073FFFF, NAND
EraseArea[0,APE]: 0x00A40000-0x06F3FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 0.360s
Writing all blocks...
Writing APE X-LOADER Certificate...
Writing APE KEYS Certificate...
Writing APE PRIMAPP Certificate...
Writing APE X-LOADER Certificate...
Writing APE KEYS Certificate...
Writing APE PRIMAPP Certificate...
Writing APE SOS+XZIP Certificate...
Writing APE PASUBTOC Certificate...
Writing APE PAPUBKEYS Certificate...
Writing APE SOS+UPDAPP Certificate...
Writing APE SOS+CORE Certificate...
Writing APE SOS+ROFS Certificate...
Programming Status OK!
All blocks written OK! Time taken 98.860s
Restarting MCU...
Processing RM-320_31.0.015_PR.v08 (CMT)...
Processing RM-320_31.0.015_PR.v08 (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID:        24200705
APE_ASIC_MODE_ID:        00
APE_PUBLIC_ID:                DDAB593DCC45FB0A6554D853AD44579AED384503
APE_ROOT_KEY_HASH:        BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:        000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:                00000295
CMT_EM_ASIC_ID:                00000B22
CMT_PUBLIC_ID:                15600018A8750052A4C87799D922F0204A65D6C2
CMT_ASIC_MODE_ID:        00
CMT_ROOT_KEY_HASH:        CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:                4B9B75103E691FF8
RM-320_31.0.015_PR.v08, Type: Flash Image, Algo: BB5, OMAP2420 UNISTORE-II-1.5.1 ALG, BB5, XSR 1.5
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
omap2420_m1_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.41.0, Algo: BB5
FlashChip[0,APE]: 0x00EC004000220000, Samsung, NAND
Requested Algorithm: OMAP2420 UNISTORE-II-1.5.1 ALG (APE)
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
teflon_sam_nand_xsr151_m1.fg, Type: Algorithm, Rev: 0.1.57.0, Algo: OMAP2420 UNISTORE-II-1.5.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x05140000-0x06F3FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 0.94s
Writing all blocks...
Writing APE SOS+ROFX Certificate...
Programming Status OK!
All blocks written OK! Time taken 17.375s
Restarting MCU...
Processing RM320_31.0.002_025_xxx_U01_uda.fpsx (CMT)...
Processing RM320_31.0.002_025_xxx_U01_uda.fpsx (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID:        24200705
APE_ASIC_MODE_ID:        00
APE_PUBLIC_ID:                DDAB593DCC45FB0A6554D853AD44579AED384503
APE_ROOT_KEY_HASH:        BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:        000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:                00000295
CMT_EM_ASIC_ID:                00000B22
CMT_PUBLIC_ID:                15600018A8750052A4C87799D922F0204A65D6C2
CMT_ASIC_MODE_ID:        00
CMT_ROOT_KEY_HASH:        CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:                4B9B75103E691FF8
RM320_31.0.002_025_xxx_U01_uda.fpsx, Type: Flash Image, Algo: BB5, OMAP2420 UNISTORE-II-1.5.1 ALG, BB5, XSR 1.5
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
omap2420_m1_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.41.0, Algo: BB5
FlashChip[0,APE]: 0x00EC004000220000, Samsung, NAND
Requested Algorithm: OMAP2420 UNISTORE-II-1.5.1 ALG (APE)
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
teflon_sam_nand_xsr151_m1.fg, Type: Algorithm, Rev: 0.1.57.0, Algo: OMAP2420 UNISTORE-II-1.5.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Started group flash erase
EraseArea[0,APE]: 0x06F40000-0x0F87FFFF, NAND
Erase Certificate: SOS-USER (APE)
Waiting 320s for erasure finish...
Erase taken 0.672s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 62.172s
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
Failed to read info -> Phone not detected
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!

THANKS CYCLONE BOX TEAM FOR THIS PRODUCT

rozhal 04-13-2009 17:26

Tested nokia n77
 
Code:

Initializing FBUS...
All initialized - Ready to work
Booting RAP...
APE_SYSTEM_ASIC_ID:    17100708
APE_ASIC_MODE_ID:    00
APE_PUBLIC_ID:        CDC7002D5C45EBD367D9DFDD87E9E26721375452
APE_ROOT_KEY_HASH:    49A97E826B93BA20B7ED0B082475C00500000000
APE_ROM_ID:        1DFD66132C872FD4
CMT_SYSTEM_ASIC_ID:    000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:        00000295
CMT_EM_ASIC_ID:        00000B22
CMT_PUBLIC_ID:        1970020B33CD67504BE727A5359312CB26C4DAA0
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:        273F6D55DFAAF68F
Check BB5 Flashing Bus Finished OK
Processing pre flash tasks...
Backing up certificates...
Booting RAP...
APE_SYSTEM_ASIC_ID:    17100708
APE_ASIC_MODE_ID:    00
APE_PUBLIC_ID:        CDC7002D5C45EBD367D9DFDD87E9E26721375452
APE_ROOT_KEY_HASH:    49A97E826B93BA20B7ED0B082475C00500000000
APE_ROM_ID:        1DFD66132C872FD4
CMT_SYSTEM_ASIC_ID:    000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:        00000295
CMT_EM_ASIC_ID:        00000B22
CMT_PUBLIC_ID:        1970020B33CD67504BE727A5359312CB26C4DAA0
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:        273F6D55DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: FD7850EB2F35CD3FAA1A8F28226ADE73C3115663
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC00A100800015, Samsung, NAND
FlashContent[0,APE]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NAND
h3_sam_nand_format.fg, Type: Algorithm, Rev: 0.1.16.255, Algo: OMAP1610 FORMAT ALG
Box VPP disabled
Internal APE Phone VPP Enabled
Failed to Read All Certificates -> Failed to get APE PAPUB Hash
Certificates backup thread finished, continuing...
Backing up simlock...
Starting PM read in range 308-308...
[308] Reading 10 records
[308,0] Reading 1 bytes
[308,1] Reading 8192 bytes
[308,2] Reading 1 bytes
[308,3] Reading 1 bytes
[308,4] Reading 1 bytes
[308,5] Reading 10 bytes
[308,6] Reading 1 bytes
[308,7] Reading 1 bytes
[308,8] Reading 1 bytes
[308,9] Reading 40 bytes
PM Read OK, Time taken 3.938s
Simlock backup OK
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing RM-194_3.0838.22.0.1_western_C00_PRD_cc.fpsx (CMT)...
Booting RAP...
APE_SYSTEM_ASIC_ID:    17100708
APE_ASIC_MODE_ID:    00
APE_PUBLIC_ID:        CDC7002D5C45EBD367D9DFDD87E9E26721375452
APE_ROOT_KEY_HASH:    49A97E826B93BA20B7ED0B082475C00500000000
APE_ROM_ID:        1DFD66132C872FD4
CMT_SYSTEM_ASIC_ID:    000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:        00000295
CMT_EM_ASIC_ID:        00000B22
CMT_PUBLIC_ID:        1970020B33CD67504BE727A5359312CB26C4DAA0
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:        273F6D55DFAAF68F
RM-194_3.0838.22.0.1_western_C00_PRD_cc.fpsx, Type: Flash Image, Algo: BB5, BB5 ALGORITHM, BB5, OMAP1710 UNISTORE-II-1.2.1  ALG
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: FD7850EB2F35CD3FAA1A8F28226ADE73C3115663
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00080000-0x0075133D, NOR
EraseArea[0,CMT]: 0x00000000-0x0005FFFF, NOR
EraseArea[0,CMT]: 0x00880000-0x00FEFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 39.94s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT ADL Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 38.703s
Restarting MCU...
Processing RM-194_3.0838.22.0.1_western_C00_PRD_cc.fpsx (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID:    17100708
APE_ASIC_MODE_ID:    00
APE_PUBLIC_ID:        CDC7002D5C45EBD367D9DFDD87E9E26721375452
APE_ROOT_KEY_HASH:    49A97E826B93BA20B7ED0B082475C00500000000
APE_ROM_ID:        1DFD66132C872FD4
CMT_SYSTEM_ASIC_ID:    000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:        00000295
CMT_EM_ASIC_ID:        00000B22
CMT_PUBLIC_ID:        1970020B33CD67504BE727A5359312CB26C4DAA0
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:        273F6D55DFAAF68F
RM-194_3.0838.22.0.1_western_C00_PRD_cc.fpsx, Type: Flash Image, Algo: BB5, BB5 ALGORITHM, BB5, OMAP1710 UNISTORE-II-1.2.1  ALG
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: FD7850EB2F35CD3FAA1A8F28226ADE73C3115663
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC00A100800015, Samsung, NAND
FlashContent[0,APE]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NAND
h3_sam_nand_xsr.fg, Type: Algorithm, Rev: 0.1.49.0, Algo: OMAP1710 UNISTORE-II-1.2.1  ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: FD7850EB2F35CD3FAA1A8F28226ADE73C3115663
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x00000000-0x0007FFFF, NAND
EraseArea[0,APE]: 0x00080000-0x000FFFFF, NAND
EraseArea[0,APE]: 0x00100000-0x0025FFFF, NAND
EraseArea[0,APE]: 0x003C0000-0x0569FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 1.156s
Writing all blocks...
Writing APE KEYS Certificate...
Writing APE X-LOADER Certificate...
Writing APE PRIMAPP Certificate...
Writing APE SOS+LOADER Certificate...
Writing APE SOS*UPDAPP Certificate...
Writing APE SOS+UZIP Certificate...
Writing APE PAPUBKEYS Certificate...
Writing APE PASUBTOC Certificate...
Writing APE ADL Certificate...
Writing APE SOS+XZIP Certificate...
Writing APE SOS*CORE Certificate...
Writing APE SOS+ROFS Certificate...
Writing APE SOS+ROFX Certificate...
Programming Status OK!
All blocks written OK! Time taken 80.360s
Restarting MCU...
Processing RM-194_rofx_3.0838.22.0.1_PRD.V06 (CMT)...
Processing RM-194_rofx_3.0838.22.0.1_PRD.V06 (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID:    17100708
APE_ASIC_MODE_ID:    00
APE_PUBLIC_ID:        CDC7002D5C45EBD367D9DFDD87E9E26721375452
APE_ROOT_KEY_HASH:    49A97E826B93BA20B7ED0B082475C00500000000
APE_ROM_ID:        1DFD66132C872FD4
CMT_SYSTEM_ASIC_ID:    000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:        00000295
CMT_EM_ASIC_ID:        00000B22
CMT_PUBLIC_ID:        1970020B33CD67504BE727A5359312CB26C4DAA0
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:        273F6D55DFAAF68F
RM-194_rofx_3.0838.22.0.1_PRD.V06, Type: Flash Image, Algo: BB5, OMAP1710 UNISTORE-II-1.2.1  ALG, BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 100Kbits
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: FD7850EB2F35CD3FAA1A8F28226ADE73C3115663
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC00A100800015, Samsung, NAND
FlashContent[0,APE]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NAND
h3_sam_nand_xsr.fg, Type: Algorithm, Rev: 0.1.49.0, Algo: OMAP1710 UNISTORE-II-1.2.1  ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: FD7850EB2F35CD3FAA1A8F28226ADE73C3115663
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x03E20000-0x0569FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 0.328s
Writing all blocks...
Writing APE SOS+ROFX Certificate...
Programming Status OK!
All blocks written OK! Time taken 41.594s
Restarting MCU...
Processing RM-194_userarea_3.0838.22.0.1.U01 (CMT)...
Processing RM-194_userarea_3.0838.22.0.1.U01 (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID:    17100708
APE_ASIC_MODE_ID:    00
APE_PUBLIC_ID:        CDC7002D5C45EBD367D9DFDD87E9E26721375452
APE_ROOT_KEY_HASH:    49A97E826B93BA20B7ED0B082475C00500000000
APE_ROM_ID:        1DFD66132C872FD4
CMT_SYSTEM_ASIC_ID:    000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:        00000295
CMT_EM_ASIC_ID:        00000B22
CMT_PUBLIC_ID:        1970020B33CD67504BE727A5359312CB26C4DAA0
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:        273F6D55DFAAF68F
RM-194_userarea_3.0838.22.0.1.U01, Type: Flash Image, Algo: BB5, OMAP1710 UNISTORE-II-1.2.1  ALG, BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 100Kbits
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: FD7850EB2F35CD3FAA1A8F28226ADE73C3115663
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC00A100800015, Samsung, NAND
FlashContent[0,APE]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NAND
h3_sam_nand_xsr.fg, Type: Algorithm, Rev: 0.1.49.0, Algo: OMAP1710 UNISTORE-II-1.2.1  ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: FD7850EB2F35CD3FAA1A8F28226ADE73C3115663
Started group flash erase
EraseArea[0,APE]: 0x056A0000-0x07C9FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 0.515s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 1.187s
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version    V 06wk15v48.4
MCU Date    18-09-08
Product        RM-194
Manufacturer    (c) Nokia. 
IMEI        355524010257210
IMEI Spare    3A55250401522701
IMEI SV        3355250401522721F7000000
PSD        0000001F00000000
WLAN MAC    000100085C01
RETU        15
TAHVO        22
AHNE        30
RFIC        17211721
DSP        metro_06w14pb_07w32
Simlock Server    SIMLOCK SERVER VERSION 63
Simlock Key    FFFFFFFFFFFFFFFF
Simlock Profile    FFFFFFFFFFFFFFFF
Simlock Key Cnt    0
Simlock FBUS Cnt    0
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!

CONTACT Condisi HANDPHONE Retailer

residentdenuevo 04-14-2009 04:00

UNlock Done nokia 1208 rh-106 SW version 5.32 UNlock full 0k
 
Thks full support for nokias asic B

1200 rh-100(32 seconds in flashing
1208 rh-106 (45 seconds in flashing

cyclone through this team pretty quick repair and flash box

oMeR_Rasheed 04-14-2009 08:19

N73 flashed whit cyclone box
 
HERE IS LOG

Code:


Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.6634
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v1.00, (Mar 13 2009 20:30:35, gcc-4.2.2, RTOS V5.1.0), Type: Signed Production Application
Box Serial Number: C0000156
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk32
Initializing security card...
Card Serial Number: D10000AC
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 5.10v PASSED
MCU Voltage 3.29v PASSED
Core Voltage 1.82v PASSED
VBAT Voltage 0.35v PASSED
VBAT Voltage 5.02v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
Internal Box VPP Enabled
VPP Voltage 5.04v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
External Box VPP Enabled
VPP Voltage 0.02v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Initializing FBUS...
All initialized - Ready to work
Processing pre-flash tasks...
Pre-flash tasks finished
Booting UPP...
Box VPP disabled
Processing Flash Image Failed -> UPP Not Responding
Failed to Flash -> Problem with processing MCU Image file
Processing pre-flash tasks...
Pre-flash tasks finished
Booting UPP...
Box VPP disabled
Processing Flash Image Failed -> UPP Not Responding
Failed to Flash -> Problem with processing MCU Image file
Processing pre flash tasks...
Read certificates operation not possible for USB bus
Backing up simlock...
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
Simlock backup problem -> Phone not detected
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Selecting USB Flashing Method...
[BB5 ADL Server]: Found 0 active devices
[BB5 ADL Server]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
Proceeding with Dead USB Mode
Press power-on shortly to run USB Boot ROM
Failed to prepare BB5 USB Connection -> No RAW Loader found in given Images, Dead USB Cannot be performed
Failed to Process all Image files -> Failed to prepare BB5 USB Flashing
Processing pre flash tasks...
Read certificates operation not possible for USB bus
Backing up simlock...
[BB5 NMWCD]: Found 1 active devices
[Nokia N73 USB Generic]: Opening Connection
[Nokia N73 USB Generic]: Port opened OK!
Starting PM read in range 308-308...
[BB5 NMWCD]: Found 1 active devices
[Nokia N73 USB Generic]: Opening Connection
[Nokia N73 USB Generic]: Port opened OK!
[308] Reading 9 records
[308,0] Reading 1 bytes
[308,1] Reading 8192 bytes
[308,3] Reading 1 bytes
[308,4] Reading 1 bytes
[308,5] Reading 10 bytes
[308,6] Reading 1 bytes
[308,7] Reading 1 bytes
[308,8] Reading 1 bytes
[308,9] Reading 40 bytes
PM Read OK, Time taken 0.422s
Simlock backup OK
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Selecting USB Flashing Method...
[BB5 ADL Server]: Found 0 active devices
[BB5 ADL Server]: Not Found!
[BB5 NMWCD]: Found 1 active devices
[Nokia N73 USB Generic]: Opening Connection
[Nokia N73 USB Generic]: Port opened OK!
Proceeding with Alive USB Mode
CMT FlashChip:  0x00EC22E869210000, Samsung
APE FlashChip:  0x00EC00A100800015, Samsung
APE:    17100020
ROOTKEY Hash for APE:  49A97E826B93BA20B7ED0B082475C005
PAPUBKEYS Hash for APE:  5E8D0D504A0902E261268C14FCD8A2C9093523BC
IMEI:    359738004403574
CMT Public ID:  12C00002F4BB0054837D59B9CE86DAA15D275D56
ROOTKEY Hash for CMT:  BAF3A9C3DBFA8454937DB77F2B8852B1
PAPUBKEYS Hash for CMT:  5E8D0D504A0902E261268C14FCD8A2C9093523BC
Sending CMT ADL Certificate and Data...
Sending APE ADL Certificate and Data...
Waiting for ADL Server Startup...
[BB5 ADL Server]: Found 1 active devices
[Nokia BB5 ADL Loader USB Generic]: Opening Connection
[Nokia BB5 ADL Loader USB Generic]: Port opened OK!
ADL Server Startup Confirmed OK!
Processing N73_4.0736.3.2.1_western_C00_PRD_cc.fpsx (CMT)...
N73_4.0736.3.2.1_western_C00_PRD_cc.fpsx, Type: Flash Image, Algo: BB5, BB5 ALGORITHM, BB5, OMAP1710 UNISTORE-II-1.2.1  ALG
Partitioning...
Partitioning OK
Started flash erase
EraseArea[0,CMT]: 0x00080000-0x007314D1, NOR
EraseArea[0,CMT]: 0x00000000-0x0005FFFF, NOR
EraseArea[0,CMT]: 0x001E0000-0x001FFFFF, NOR
EraseArea[0,CMT]: 0x00880000-0x00FEFFFF, NOR
Erase taken 95.453s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT ADL Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 70.969s
Processing N73_rofx_4.0736.3.2.1_PRD.V01 (CMT)...
Processing N73_userarea_4.0736.3.2.1.U01 (CMT)...
Processing N73_4.0736.3.2.1_western_C00_PRD_cc.fpsx (APE)...
N73_4.0736.3.2.1_western_C00_PRD_cc.fpsx, Type: Flash Image, Algo: BB5, BB5 ALGORITHM, BB5, OMAP1710 UNISTORE-II-1.2.1  ALG
Partitioning...
Partitioning OK
Started flash erase
EraseArea[0,APE]: 0x00000000-0x0007FFFF, NAND
EraseArea[0,APE]: 0x00080000-0x000FFFFF, NAND
EraseArea[0,APE]: 0x00100000-0x0025FFFF, NAND
EraseArea[0,APE]: 0x003C0000-0x04E1FFFF, NAND
Erase taken 1.141s
Writing all blocks...
Writing APE KEYS Certificate...
Writing APE X-LOADER Certificate...
Writing APE PRIMAPP Certificate...
Writing APE SOS+LOADER Certificate...
Writing APE SOS*UPDAPP Certificate...
Writing APE SOS+UZIP Certificate...
Writing APE PAPUBKEYS Certificate...
Writing APE PASUBTOC Certificate...
Writing APE ADL Certificate...
Writing APE SOS+XZIP Certificate...
Writing APE SOS*CORE Certificate...
Programming Status OK!
All blocks written OK! Time taken 189.422s
Processing N73_rofx_4.0736.3.2.1_PRD.V01 (APE)...
N73_rofx_4.0736.3.2.1_PRD.V01, Type: Flash Image, Algo: BB5, OMAP1710 UNISTORE-II-1.2.1  ALG, BB5, BB5 ALGORITHM
Partitioning...
Partitioning OK
Started flash erase
EraseArea[0,APE]: 0x03920000-0x04E1FFFF, NAND
Erase taken 0.313s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 88.750s
Processing N73_userarea_4.0736.3.2.1.U01 (APE)...
N73_userarea_4.0736.3.2.1.U01, Type: Flash Image, Algo: BB5, OMAP1710 UNISTORE-II-1.2.1  ALG, BB5, BB5 ALGORITHM
Started flash erase
EraseArea[0,APE]: 0x04E20000-0x07C9FFFF, NAND
Erase taken 0.688s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 54.562s
Restarting CMT...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
[BB5 NMWCD]: Found 1 active devices
[Nokia BB5 ADL Loader USB Generic]: Opening Connection
[Nokia BB5 ADL Loader USB Generic]: Port opened OK!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
Factory defaults OK
Reading info...
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
Failed to read info -> Phone not detected
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!

B.R
SHERRY MOBILES

Sydney_Unlocker 04-14-2009 10:11

Nokia 2626 Successfully Unlocked
 
Here is Success LOG :

Code:

MCU Version    V 03.51
MCU Date    29-12-06
Product        RM-291
Manufacturer    (c) Nokia.   
IMEI        353935018050583
Asic        11
HW Signature    DD59FDF6CC0B7E49
Simlock Server    SIMLOCK SERVER VERSION 63
Simlock Key    5050100058056920
Simlock Profile    800000000001000B
Simlock Aux    000B5555
Simlock IMEI    00553539350180505800
Simlock Key Cnt    0
Simlock FBUS Cnt    0
Selecting unlock method...
Search in: C:\Program Files\Cyclone Box\UnlockData\
Searching for: RM-291_V 03.51.unlock_img
Asking card to sign HW Signature...
Signed OK (35405A33E8D9354121B16FA39B4123CEEFE62A4E)
Writing patch file...
Booting UPP...
UPP ID: 3040 [HW_UNKNOWN]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC22E8 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00007121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22E8 (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 5.51V
MSID-Crypted: 845203698F41E5298C95A22BC9
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: 67B892708AFAABB9148E39CB
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x010A0000-0x010BFFFF]
Erase taken 1.47s
Writing 8 blocks...
All blocks written OK! Time taken 0.781s
Terminating flash session
Box VPP disabled
Writing SP...
New SP Accepted OK!
Writing restore file...
Booting UPP...
UPP ID: 3040 [HW_UNKNOWN]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC22E8 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00007121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22E8 (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 5.55V
MSID-Crypted: 845203698F41E5298C95A22BC9
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: 67B892708AFAABB9148E39CB
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x010A0000-0x010BFFFF]
Erase taken 1.0s
Writing 8 blocks...
All blocks written OK! Time taken 0.750s
Terminating flash session
Box VPP disabled
Phone unlocked OK!


oMeR_Rasheed 04-14-2009 14:57

2760 unlocked
 
Code:

Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.6634
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v1.00, (Mar 13 2009 20:30:35, gcc-4.2.2, RTOS V5.1.0), Type: Signed Production Application
Box Serial Number: C0000156
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk32
Initializing security card...
Card Serial Number: D10000AC
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 5.08v PASSED
MCU Voltage 3.29v PASSED
Core Voltage 1.83v PASSED
VBAT Voltage 0.01v PASSED
VBAT Voltage 4.99v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
Internal Box VPP Enabled
VPP Voltage 4.95v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
External Box VPP Enabled
VPP Voltage 0.00v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Initializing FBUS...
All initialized - Ready to work
MCU Version V 04.22
MCU Date 31-08-07
Product  RM-258
Manufacturer (c) Nokia
IMEI  356401021248596
Failed to Unlock DCT4 -> Initial SP corrupted or Baseband5 phone detected
MCU Version V 04.22
MCU Date 31-08-07
Product  RM-258
Manufacturer (c) Nokia
IMEI  356401021248596
Failed to Unlock DCT4 -> Initial SP corrupted or Baseband5 phone detected
MCU Version V 04.22
MCU Date 31-08-07
Product  RM-258
Manufacturer (c) Nokia
IMEI  356401021248596
Failed to Unlock DCT4 -> Initial SP corrupted or Baseband5 phone detected
Phone is in Charging Mode
Phone is in Power Off Mode
Phone is in Power Off Mode
Phone is in Power Off Mode
Phone is in Power Off Mode
Local mode set
MCU Version V 04.22
MCU Date 31-08-07
Product  RM-258
Manufacturer (c) Nokia
IMEI  356401021248596
Asic  11
HW Signature 1E8CD72D70D12AB5
Simlock Server SIMLOCK SERVER
Simlock Key 2140100000000000
Simlock Profile 800000000001000B
Simlock Aux 000B5555
Simlock IMEI 00553564010212485900
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Selecting unlock method...
Search in: C:\Program Files\Cyclone Box\UnlockData\
Searching for: RM-258_V 04.22.unlock_img
Asking card to sign HW Signature...
Signed OK (E906217BFE0EBC2CC7C4726F0E32DF8BB5D066F9)
Writing patch file...
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x0020881C @ 0x01000000, ST, SectorSize: 128kB, Ext: 00009221
FlashChip[1]: 0x0020881C @ 0x02000000, ST, SectorSize: 128kB, Ext: 00009221
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x0020881C (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.00V
MSID-Crypted: 846FF90F63F0AF333FDF4C6E73
MSID-Plain: 2C40BAE9008985CEA8000000
FAID-Crypted: 783278D3E8ED09DCE518F3D8
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x01000000-0x0101FFFF]
Erasing NOR Region [0x01080000-0x0109FFFF]
Erase taken 1.140s
Writing 10 blocks...
All blocks written OK! Time taken 10.31s
Terminating flash session
Box VPP disabled
Writing SP...
New SP Accepted OK!
Phone unlocked OK!

B.R
SHERRY MOBILES

hasnain 04-17-2009 08:27

2610 flashed and unlocked
 
Code:

MCU Version V 04.90
MCU Date 10-01-07
Product RH-86
Manufacturer (c) Nokia.
IMEI 355528010258078
IMEI Spare 3A55250801520807
IMEI SV 3355250801520837F2000000
PPM V 04.90, 10-01-07, RH-86_87, (c) Nokia. , IA
CNT Content: ia, V 04.90, 10-01-07, RH-86_87, (c) Nokia.
PSN KAI508992
Product Code 0533259
Module Code 0202930
Basic Product Code 0530409
PSD 0000000D00000000
HW 9001
UEM 1328
UPP 12352
RFIC 0500
DSP P05w45.v45
LCD ELBE
Asic 11
HW Signature 4ECF82953E763D63
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 0010100000000000
Simlock Profile 800000000001000B
Simlock Aux 000B5555
Simlock IMEI 00553555280102580700
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Processing pre-flash tasks...
Pre-flash tasks finished
Booting UPP...
UPP ID: 3040 [HW_UNKNOWN]
rh86_87__07.11.mcusw, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC22E8 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00007121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22E8 (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.00V
MSID-Crypted: 8447B528BB2E252A6CF1D4A9F5
MSID-Plain: 37DFBAE900524BDDA8000000
FAID-Crypted: 7681A7F7BD3EC3ADFC30C99D
Flashbus Write baud set to 6.50Mbits
3 Region(s) to erase
Erasing NOR Region [0x01000000-0x0101FFFF]
Erasing NOR Region [0x01020000-0x018DFFFF]
Erasing NOR Region [0x01EE0000-0x01FDFFFF]
Erase taken 74.31s
Writing 554 blocks...
All blocks written OK! Time taken 49.344s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 3040 [HW_UNKNOWN]
rh86_87__07.11.image_ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC22E8 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00007121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22E8 (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.02V
MSID-Crypted: 846D281C1B6776CD75422758E0
MSID-Plain: D26EBAF100524BDDAA000610
FAID-Crypted: F29385FE39D6B837D06AF9AF
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01B80000-0x01EDFFFF]
Erase taken 21.719s
File Sector Size: 64kB, Flash Chip Sector Size: 64kB
CNT Convertion not needed
Writing 80 blocks...
All blocks written OK! Time taken 7.422s
Terminating flash session
Extracting Content Package...
CP Extract Failed -> CP Server not exists
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 3040 [HW_UNKNOWN]
rh86_87__07.11.ppm_ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC22E8 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00007121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22E8 (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 84E9B23CDE7E311164FC532F72
MSID-Plain: 3E4EBAE900524BDDA9000000
FAID-Crypted: 3601E21465AA21557A188625
Flashbus Write baud set to 3.25Mbits
1 Region(s) to erase
Erasing NOR Region [0x018E0000-0x01B7FFFF]
Erase taken 19.922s
Writing 99 blocks...
All blocks written OK! Time taken 9.125s
Terminating flash session
Box VPP disabled
Processing post-flash tasks...
Setting Factory Defaults...
Factory defaults OK
Unlocking...
MCU Version V 07.11
MCU Date 05-11-08
Product RH-86
Manufacturer (c) Nokia.
IMEI 355528010258078
Asic 11
HW Signature 4ECF82953E763D63
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 0010100000000000
Simlock Profile 800000000001000B
Simlock Aux 000B5555
Simlock IMEI 00553555280102580700
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Selecting unlock method...
Search in: C:\Program Files\Cyclone Box\UnlockData\
Searching for: RH-86_V 07.11.unlock_img
Asking card to sign HW Signature...
Signed OK (D2884B725A07188A8421A1F7029644DC47E1D238)
Writing patch file...
Booting UPP...
UPP ID: 3040 [HW_UNKNOWN]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC22E8 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00007121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22E8 (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 8447B528BB2E252A6CF1D4A9F5
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: 7681A7F7BD3EC3ADFC30C99D
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x010A0000-0x010BFFFF]
Erase taken 0.953s
Writing 8 blocks...
All blocks written OK! Time taken 0.906s
Terminating flash session
Box VPP disabled
Writing SP...
New SP Accepted OK!
Writing restore file...
Booting UPP...
UPP ID: 3040 [HW_UNKNOWN]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC22E8 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00007121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22E8 (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 8447B528BB2E252A6CF1D4A9F5
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: 7681A7F7BD3EC3ADFC30C99D
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x010A0000-0x010BFFFF]
Erase taken 0.953s
Writing 8 blocks...
All blocks written OK! Time taken 0.735s
Terminating flash session
Box VPP disabled
Phone unlocked OK!
Unlock thread finished, continuing...
Post-flash tasks finished...
Flash successfully finished!


hasnain 04-17-2009 08:28

1600 flashed successful
 
Code:

Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
rh64_05.030, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00012A7E @ 0x01000000, AMD, SectorSize: 64kB, Ext: 00240111
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00012A7E (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 84DBDE89E6DC2D8B9AD1092031
MSID-Plain: 3E4EBAE9005594B1AA000000
FAID-Crypted: 46AF0F0088717872898F80F4
Flashbus Write baud set to 6.50Mbits
5 Region(s) to erase
Erasing NOR Region [0x01000000-0x0100FFFF]
Erasing NOR Region [0x01010000-0x013BFFFF]
Erasing NOR Region [0x013C0000-0x013EFFFF]
Erasing NOR Region [0x017C0000-0x017EFFFF]
Erasing NOR Region [0x01FC0000-0x01FEFFFF]
Erase taken 27.422s
Writing 119 blocks...
All blocks written OK! Time taken 8.953s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
rh640_nai5.03ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00012A7E @ 0x01000000, AMD, SectorSize: 64kB, Ext: 00240111
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00012A7E (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.00V
MSID-Crypted: 84896D99FC092F5AEC70DE29E1
MSID-Plain: 3E4EBAE9005594B1A8000000
FAID-Crypted: B344E67BDDBA6189E058A295
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01380000-0x013BFFFF]
Erase taken 1.750s
Writing 9 blocks...
All blocks written OK! Time taken 0.672s
Terminating flash session
Extracting Content Package...
CP Server: File Server fake reply for CUI phone.
CP Extract Failed -> CP Not Extracted, Code: 1
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
rh64_05.03ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00012A7E @ 0x01000000, AMD, SectorSize: 64kB, Ext: 00240111
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00012A7E (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.07V
MSID-Crypted: 84896D99FC092F5AEC70DE29E1
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: B344E67BDDBA6189E058A295
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x011D0000-0x011DFFFF]
Erasing NOR Region [0x011E0000-0x0137FFFF]
Erase taken 11.735s
Writing 99 blocks...
All blocks written OK! Time taken 7.531s
Terminating flash session
Box VPP disabled
Processing post-flash tasks...
Setting Factory Defaults...
Factory defaults OK
Post-flash tasks finished...
Flash successfully finished!


hasnain 04-17-2009 08:29

E51 flashed successfully
 
Code:

MCU Version V 100.15.38.2
MCU Date 02-10-07
Product RM-244
Manufacturer (c) Nokia
IMEI 15.38.2, 02-10-07, RM-244, (c) Nokia
IMEI Spare 33353736363330313233383634353800
IMEI SV 3A75660321834605
ESN OTP 3uf!ƒF
PPM 100.34.20j 100.34.20100.34.20_v10_1.1k rm244ENO708.1_100.15.37v020n256o256
PSN SCN012782
Product Code 0552345
Basic Product Code 0545341
PSD 0000000000000000
LPSN 0
WLAN MAC 001CD6316AF5
APE SW 100.34.20
APE Variant 100.34.20100.34.20_v10_1.1
APE Test rm244ENO708.1_100.15.37v020
APE HW 256
APE ADSP 256
RETU 15
TAHVO 22
AHNE 11
HW 0605i, 100.34.20j 100.34.20100.34.20_v10_1.1k rm244ENO708.1_100.15.37v020n256o256
PCI i, 100.34.20j 100.34.20100.34.20_v10_1.1k rm244ENO708.1_100.15.37v020n256o256
UEM 100.34.20j 100.34.20100.34.20_v10_1.1k rm244ENO708.1_100.15.37v020n256o2560(100.34.20, 29-09-2007, RM-244, (c)Nokia ,
UPP 100.34.20j 100.34.20100.34.20_v10_1.1k rm244ENO708.1_100.15.37v020n256o2560(100.34.20, 29-09-2007, RM-244, (c)Nokia ,
RFIC 17141715
DSP SI07w15PB_07w38
LCD 100.34.20j 100.34.20100.34.20_v10_1.1k rm244ENO708.1_100.15.37v020n256o2560(100.34.20, 29-09-2007, RM-244, (c)Nokia ,
BT 100.34.20j 100.34.20100.34.20_v10_1.1k rm244ENO708.1_100.15.37v020n256o256
ADSP Sw 100.34.20j 100.34.20100.34.20_v10_1.1k rm244ENO708.1_100.15.37v020n256o256
ADSP DevID 100.34.20j 100.34.20100.34.20_v10_1.1k rm244ENO708.1_100.15.37v020n256o256
ADSP RevID 100.34.20j 100.34.20100.34.20_v10_1.1k rm244ENO708.1_100.15.37v020n256o2560(100.34.20, 29-09-2007, RM-244, (c)Nokia ,
AEM 100.34.20j 100.34.20100.34.20_v10_1.1k rm244ENO708.1_100.15.37v020n256o2560(100.34.20, 29-09-2007, RM-244, (c)Nokia ,
Flip MCUSW 100.34.20j 100.34.20100.34.20_v10_1.1k rm244ENO708.1_100.15.37v020n256o2560(100.34.20, 29-09-2007, RM-244, (c)Nokia ,
Simlock Server SIMLOCK SERVER
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Processing pre flash tasks...
Backing up certificates...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 2300011263800058C984FECD7F5200EDB88F7DFA
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: A8C1D6713E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC004000600022, Samsung, ONENAND
FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 35AC54F8E31BE1357AB78D73834F020906331653
APE Subsystem Not Found
CMT NPC Ok
CMT HWC Ok
CMT CCC Ok
CMT R&D Ok
CMT VARIANT Not Found
CMT PAPUBKEYS Ok
CMT KEYS Ok
Restarting MCU...
Read all certificates finished
Certificates backup thread finished, continuing...
Backing up simlock...
Starting PM read in range 308-308...
[308] Reading 14336 records
[308,0] Reading 50593801 bytes
Failed to read PM -> Failed to read PM Record 308,0
Simlock backup OK
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm244_3003456_prd.c00 (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 2300011263800058C984FECD7F5200EDB88F7DFA
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: A8C1D6713E691FF8
rm244_3003456_prd.c00, Type: Flash Image, Algo: BB5, XSR 1.5
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC004000600022, Samsung, ONENAND
FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 35AC54F8E31BE1357AB78D73834F020906331653
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00040000-0x007FFFFF, ONENAND
EraseArea[0,CMT]: 0x00A00000-0x068FFFFF, ONENAND
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 1.78s
Writing all blocks...
Writing CMT ADA Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT RAP3NAND Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT SOS*UPDAPP Certificate...
Writing CMT SOS*DSP0 Certificate...
Writing CMT SOS*ISASW Certificate...
Writing CMT SOS*CORE Certificate...
Writing CMT SOS+ROFS Certificate...
Programming Status OK!
All blocks written OK! Time taken 99.313s
Restarting MCU...
Processing rm244_3003456_prd.c00 (APE)...
Processing rm244_3003456_prd.v08 (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 2300011263800058C984FECD7F5200EDB88F7DFA
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: A8C1D6713E691FF8
rm244_3003456_prd.v08, Type: Flash Image, Algo: BB5, XSR 1.5
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC004000600022, Samsung, ONENAND
FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 35AC54F8E31BE1357AB78D73834F020906331653
Started group flash erase
EraseArea[0,CMT]: 0x04A00000-0x068FFFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.328s
Writing all blocks...
Writing CMT SOS+ROFX Certificate...
Programming Status OK!
All blocks written OK! Time taken 41.469s
Restarting MCU...
Processing rm244_3003456_prd.v08 (APE)...
Processing rm244_3003456.01U (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 2300011263800058C984FECD7F5200EDB88F7DFA
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: A8C1D6713E691FF8
rm244_3003456.01U, Type: Flash Image, Algo: BB5, XSR 1.5
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC004000600022, Samsung, ONENAND
FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 35AC54F8E31BE1357AB78D73834F020906331653
Started group flash erase
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 2.63s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 6.891s
Restarting MCU...
Processing rm244_3003456.01U (APE)...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version V ICPR71_08w44.4
MCU Date 11-12-08
Product RM-244
Manufacturer (c) Nokia
IMEI 357663012386458
IMEI Spare 3A75660321834605
IMEI SV 3375660321834635F1000000
PPM 300.34.56j300.34.56300.34.56_v08k rm244ENO708.1_100.15.37v020n256o256
PSN SCN012782
Product Code 0552345
Basic Product Code 0545341
PSD 0000000000000000
LPSN 0
WLAN MAC 001CD6316AF5
APE SW 300.34.56
APE Variant 300.34.56300.34.56_v08
APE Test rm244ENO708.1_100.15.37v020
APE HW 256
APE ADSP 256
RETU 15
TAHVO 22
AHNE 11
HW 0605i, 300.34.56j300.34.56300.34.56_v08k rm244ENO708.1_100.15.37v020n256o256
PCI i, 300.34.56j300.34.56300.34.56_v08k rm244ENO708.1_100.15.37v020n256o256
UEM 300.34.56j300.34.56300.34.56_v08k rm244ENO708.1_100.15.37v020n256o256
UPP 300.34.56j300.34.56300.34.56_v08k rm244ENO708.1_100.15.37v020n256o256
RFIC 17141715
DSP SI07w15PB_08w26
LCD 300.34.56j300.34.56300.34.56_v08k rm244ENO708.1_100.15.37v020n256o256
BT 300.34.56j300.34.56300.34.56_v08k rm244ENO708.1_100.15.37v020n256o256
ADSP Sw 300.34.56j300.34.56300.34.56_v08k rm244ENO708.1_100.15.37v020n256o256
ADSP DevID 300.34.56j300.34.56300.34.56_v08k rm244ENO708.1_100.15.37v020n256o256
ADSP RevID 300.34.56j300.34.56300.34.56_v08k rm244ENO708.1_100.15.37v020n256o256
AEM 300.34.56j300.34.56300.34.56_v08k rm244ENO708.1_100.15.37v020n256o256
Flip MCUSW 300.34.56j300.34.56300.34.56_v08k rm244ENO708.1_100.15.37v020n256o256
Simlock Server SIMLOCK SERVER
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!


hasnain 04-17-2009 08:30

N73 flashed ok
 
Code:

MCU Version V 05wk47v48.3
MCU Date 02-07-07
Product RM-133
Manufacturer (c) Nokia.
IMEI 356438015501994
IMEI Spare 3A65340851059109
IMEI SV 3365340851059149F0000000
PSN SBJ050558
Product Code 0552007
Module Code 0202855
Basic Product Code 0547471
PSD 0000002200000000
LPSN "
WLAN MAC 000000045E01
RETU 15
TAHVO 22
AHNE 30
HW 6020
RFIC 17211721
DSP scarfe_05wk46v50
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 2342000000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Processing pre flash tasks...
Backing up certificates...
Booting RAP...
APE_SYSTEM_ASIC_ID: 17100708
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: 5788A8DD811EC863E8150BBA1AACEEE6F3C9B0BF
APE_ROOT_KEY_HASH: 49A97E826B93BA20B7ED0B082475C00500000000
APE_ROM_ID: 1DFD66132C872FD4
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101003000
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 125000173DCD01546E18E9F91C3077866968082E
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 273F6D55DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC00A100800015, Samsung, NAND
FlashContent[0,APE]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NAND
h3_sam_nand_format.fg, Type: Algorithm, Rev: 0.1.16.255, Algo: OMAP1610 FORMAT ALG
Box VPP disabled
Internal APE Phone VPP Enabled
Failed to Read All Certificates -> Failed to get APE PAPUB Hash
Certificates backup thread finished, continuing...
Backing up simlock...
Simlock backup problem -> Phone not detected
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing N73_4.0839.42.2.1_western_C00_PRD_cc.fpsx (CMT)...
Booting RAP...
APE_SYSTEM_ASIC_ID: 17100708
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: 5788A8DD811EC863E8150BBA1AACEEE6F3C9B0BF
APE_ROOT_KEY_HASH: 49A97E826B93BA20B7ED0B082475C00500000000
APE_ROM_ID: 1DFD66132C872FD4
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101003000
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 125000173DCD01546E18E9F91C3077866968082E
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 273F6D55DFAAF68F
N73_4.0839.42.2.1_western_C00_PRD_cc.fpsx, Type: Flash Image, Algo: BB5, BB5 ALGORITHM, BB5, OMAP1710 UNISTORE-II-1.2.1 ALG
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00080000-0x00731951, NOR
EraseArea[0,CMT]: 0x00000000-0x0005FFFF, NOR
EraseArea[0,CMT]: 0x001E0000-0x001FFFFF, NOR
EraseArea[0,CMT]: 0x00880000-0x00FEFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 43.937s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT ADL Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 41.953s
Restarting MCU...
Processing N73_4.0839.42.2.1_western_C00_PRD_cc.fpsx (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID: 17100708
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: 5788A8DD811EC863E8150BBA1AACEEE6F3C9B0BF
APE_ROOT_KEY_HASH: 49A97E826B93BA20B7ED0B082475C00500000000
APE_ROM_ID: 1DFD66132C872FD4
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101003000
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 125000173DCD01546E18E9F91C3077866968082E
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 273F6D55DFAAF68F
N73_4.0839.42.2.1_western_C00_PRD_cc.fpsx, Type: Flash Image, Algo: BB5, BB5 ALGORITHM, BB5, OMAP1710 UNISTORE-II-1.2.1 ALG
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC00A100800015, Samsung, NAND
FlashContent[0,APE]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NAND
h3_sam_nand_xsr.fg, Type: Algorithm, Rev: 0.1.49.0, Algo: OMAP1710 UNISTORE-II-1.2.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x00000000-0x0007FFFF, NAND
EraseArea[0,APE]: 0x00080000-0x000FFFFF, NAND
EraseArea[0,APE]: 0x00100000-0x0025FFFF, NAND
EraseArea[0,APE]: 0x003C0000-0x04E1FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 1.63s
Writing all blocks...
Writing APE KEYS Certificate...
Writing APE X-LOADER Certificate...
Writing APE PRIMAPP Certificate...
Writing APE SOS+LOADER Certificate...
Writing APE SOS*UPDAPP Certificate...
Writing APE SOS+UZIP Certificate...
Writing APE PAPUBKEYS Certificate...
Writing APE PASUBTOC Certificate...
Writing APE ADL Certificate...
Writing APE SOS+XZIP Certificate...
Writing APE SOS*CORE Certificate...
Writing APE SOS+ROFS Certificate...
Writing APE SOS+ROFX Certificate...
Programming Status OK!
All blocks written OK! Time taken 82.219s
Restarting MCU...
Processing N73_rofx_4.0839.42.2.1_PRD.V08 (CMT)...
Processing N73_rofx_4.0839.42.2.1_PRD.V08 (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID: 17100708
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: 5788A8DD811EC863E8150BBA1AACEEE6F3C9B0BF
APE_ROOT_KEY_HASH: 49A97E826B93BA20B7ED0B082475C00500000000
APE_ROM_ID: 1DFD66132C872FD4
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101003000
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 125000173DCD01546E18E9F91C3077866968082E
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 273F6D55DFAAF68F
N73_rofx_4.0839.42.2.1_PRD.V08, Type: Flash Image, Algo: BB5, OMAP1710 UNISTORE-II-1.2.1 ALG, BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 100Kbits
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC00A100800015, Samsung, NAND
FlashContent[0,APE]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NAND
h3_sam_nand_xsr.fg, Type: Algorithm, Rev: 0.1.49.0, Algo: OMAP1710 UNISTORE-II-1.2.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x03920000-0x04E1FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 0.297s
Writing all blocks...
Writing APE SOS+ROFX Certificate...
Programming Status OK!
All blocks written OK! Time taken 43.203s
Restarting MCU...
Processing N73_userarea_4.0839.42.2.1.U01 (CMT)...
Processing N73_userarea_4.0839.42.2.1.U01 (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID: 17100708
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: 5788A8DD811EC863E8150BBA1AACEEE6F3C9B0BF
APE_ROOT_KEY_HASH: 49A97E826B93BA20B7ED0B082475C00500000000
APE_ROM_ID: 1DFD66132C872FD4
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101003000
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 125000173DCD01546E18E9F91C3077866968082E
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 273F6D55DFAAF68F
N73_userarea_4.0839.42.2.1.U01, Type: Flash Image, Algo: BB5, OMAP1710 UNISTORE-II-1.2.1 ALG, BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 100Kbits
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC00A100800015, Samsung, NAND
FlashContent[0,APE]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NAND
h3_sam_nand_xsr.fg, Type: Algorithm, Rev: 0.1.49.0, Algo: OMAP1710 UNISTORE-II-1.2.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
Started group flash erase
EraseArea[0,APE]: 0x04E20000-0x07C9FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 0.641s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 21.984s
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version V 05wk47v61.1
MCU Date 09-07-08
Product RM-133
Manufacturer (c) Nokia.
IMEI 356438015501994
IMEI Spare 3A65340851059109
IMEI SV 3365340851059179F8000000
PSN SBJ050558
Product Code 0552007
Module Code 0202855
Basic Product Code 0547471
PSD 0000002200000000
LPSN "
RETU 15
TAHVO 22
AHNE 30
HW 6020
RFIC 17211721
DSP scarfe_mc.05wk46v50p2
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 2342000000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!


hasnain 04-17-2009 08:31

6300 flashed ok
 
Code:

Backing up certificates...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 05000104BD736B56560528078769B28F22F1B693
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 191EC665DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC22FE00006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 7F7E6491E8D30494B45630BB3A8599F4E1C674C9
APE Subsystem Not Found
CMT NPC Ok
CMT HWC Ok
CMT CCC Ok
CMT R&D Ok
CMT VARIANT Ok
CMT PAPUBKEYS Ok
CMT KEYS Ok
Restarting MCU...
Read all certificates finished
Certificates backup thread finished, continuing...
Backing up simlock...
Starting PM read in range 308-308...
[308] Reading 9 records
[308,0] Reading 1 bytes
[308,1] Reading 8192 bytes
[308,3] Reading 1 bytes
[308,4] Reading 1 bytes
[308,5] Reading 10 bytes
[308,6] Reading 1 bytes
[308,7] Reading 1 bytes
[308,8] Reading 1 bytes
[308,9] Reading 40 bytes
PM Read OK, Time taken 3.719s
Simlock backup OK
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm217__07.21.mcusw (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 05000104BD736B56560528078769B28F22F1B693
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 191EC665DFAAF68F
rm217__07.21.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 3.25Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC22FE00006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 7F7E6491E8D30494B45630BB3A8599F4E1C674C9
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x000006BF, NOR
EraseArea[0,CMT]: 0x000006C0-0x0001FFFF, NOR
EraseArea[0,CMT]: 0x00020000-0x0007FFFF, NOR
EraseArea[0,CMT]: 0x00080000-0x000DFFFF, NOR
EraseArea[0,CMT]: 0x00100000-0x001FFFFF, NOR
EraseArea[0,CMT]: 0x00200000-0x0031FFFF, NOR
EraseArea[0,CMT]: 0x00320000-0x0105FFFF, NOR
EraseArea[0,CMT]: 0x01060000-0x01067FFF, NOR
EraseArea[0,CMT]: 0x01068000-0x0107FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 91.500s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Writing CMT PMM_CONF Certificate...
Writing CMT SBIF_CONF Certificate...
Programming Status OK!
All blocks written OK! Time taken 143.984s
Restarting MCU...
Processing rm217__07.21.mcusw (APE)...
Processing rm217__07.21.ppm_mea4 (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 05000104BD736B56560528078769B28F22F1B693
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 191EC665DFAAF68F
rm217__07.21.ppm_mea4, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 3.25Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC22FE00006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 7F7E6491E8D30494B45630BB3A8599F4E1C674C9
Started group flash erase
EraseArea[0,CMT]: 0x01080000-0x015FFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 24.593s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 33.500s
Restarting MCU...
Processing rm217__07.21.ppm_mea4 (APE)...
Processing rm217__07.21.image_mea4 (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 05000104BD736B56560528078769B28F22F1B693
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 191EC665DFAAF68F
rm217__07.21.image_mea4, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 3.25Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC22FE00006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 7F7E6491E8D30494B45630BB3A8599F4E1C674C9
Started group flash erase
EraseArea[0,CMT]: 0x01600000-0x01FDFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 60.813s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 41.657s
Restarting MCU...
Processing rm217__07.21.image_mea4 (APE)...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version V 07.21
MCU Date 05-11-08
Product RM-217
Manufacturer (c) Nokia.
IMEI 356437019395759
IMEI Spare 3A65340791937505
IMEI SV 3365340791937525F5000000
PPM V 07.21, 05-11-08, RM-217, (c) Nokia. , MEA
CNT Content: mea4, V 07.21, 05-11-08, RM-217, (c) Nokia. ,
PSN DEG142992
Product Code 0537632
Module Code 0203166
Basic Product Code 0537040
PSD 0000000000000000
RETU 32
TAHVO 53
AHNE 11
HW 1002
RFIC 17211721
DSP ICPR61_08w10
BT 06cc-P9.1
ADSP Sw 06cc-P9.1
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!


hasnain 04-17-2009 08:31

5200 flashed ok
 
Code:

MCU Version V 04.71
MCU Date 28-02-07
Product RM-174
Manufacturer (c) Nokia.
IMEI 1, 28-02-07, RM-174, (c) Nokia.
IMEI Spare 33353535333730313837373230323200
IMEI SV 3A55350781770202
ESN OTP 3U5w
PPM V 04.71, 28-02-07, RM-174, (c) Nokia. , MEA
CNT Content: mea2, V 04.71, 28-02-07, RM-174, (c) Nokia. ,
PSN DKD076704
Product Code 0541037
Module Code 0203053
Basic Product Code 0530542
PSD 0000000000000000
RETU 32
TAHVO 53
AHNE 11
HW 2002
RFIC 17211721
DSP pb06w14v33
BT 06cc-P8.0
ADSP Sw 06cc-P8.0
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Processing pre flash tasks...
Backing up certificates...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 19B00201C39C605606DB3CDA871096EACFADF227
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 191EC665DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: D6D07E588DC4E06DEE7012A3C0ECC4E35D3CE263
APE Subsystem Not Found
CMT NPC Ok
CMT HWC Ok
CMT CCC Ok
CMT R&D Ok
CMT VARIANT Ok
CMT PAPUBKEYS Ok
CMT KEYS Ok
Restarting MCU...
Read all certificates finished
Certificates backup thread finished, continuing...
Backing up simlock...
Starting PM read in range 308-308...
[308] Reading 9 records
[308,0] Reading 1 bytes
[308,1] Reading 8192 bytes
[308,3] Reading 1 bytes
[308,4] Reading 1 bytes
[308,5] Reading 10 bytes
[308,6] Reading 1 bytes
[308,7] Reading 1 bytes
[308,8] Reading 1 bytes
[308,9] Reading 40 bytes
PM Read OK, Time taken 2.0s
Simlock backup OK
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm174__06.20.mcusw (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 19B00201C39C605606DB3CDA871096EACFADF227
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 191EC665DFAAF68F
rm174__06.20.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 3.25Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: D6D07E588DC4E06DEE7012A3C0ECC4E35D3CE263
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x000006BF, NOR
EraseArea[0,CMT]: 0x000006C0-0x0001FFFF, NOR
EraseArea[0,CMT]: 0x00020000-0x0007FFFF, NOR
EraseArea[0,CMT]: 0x00080000-0x000DFFFF, NOR
EraseArea[0,CMT]: 0x00100000-0x001FFFFF, NOR
EraseArea[0,CMT]: 0x00200000-0x0031FFFF, NOR
EraseArea[0,CMT]: 0x00320000-0x0105FFFF, NOR
EraseArea[0,CMT]: 0x01060000-0x01067FFF, NOR
EraseArea[0,CMT]: 0x01068000-0x0107FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 42.719s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Writing CMT PMM_CONF Certificate...
Writing CMT SBIF_CONF Certificate...
Programming Status OK!
All blocks written OK! Time taken 426.453s
Restarting MCU...
Processing rm174__06.20.mcusw (APE)...
Processing rm174__06.20.ppm_rcm (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 19B00201C39C605606DB3CDA871096EACFADF227
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 191EC665DFAAF68F
rm174__06.20.ppm_rcm, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 3.25Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: D6D07E588DC4E06DEE7012A3C0ECC4E35D3CE263
Started group flash erase
EraseArea[0,CMT]: 0x01080000-0x014FFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 8.266s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 125.47s
Restarting MCU...
Processing rm174__06.20.ppm_rcm (APE)...
Processing rm174__06.20.image_opv_cmcc (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 19B00201C39C605606DB3CDA871096EACFADF227
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 191EC665DFAAF68F
rm174__06.20.image_opv_cmcc, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 3.25Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: D6D07E588DC4E06DEE7012A3C0ECC4E35D3CE263
Started group flash erase
EraseArea[0,CMT]: 0x01500000-0x01FDFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 30.703s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 193.906s
Restarting MCU...
Processing rm174__06.20.image_opv_cmcc (APE)...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version V 06.20
MCU Date 18-03-08
Product RM-174
Manufacturer (c) Nokia.
IMEI 355537018772022
IMEI Spare 3A55350781770202
IMEI SV 3355350781770212F8000000
PPM V 06.20, 18-03-08, RM-174, (c) Nokia. , RCM
PSN DKD076704
Product Code 0541037
Module Code 0203053
Basic Product Code 0530542
PSD 0000000000000000
RETU 32
TAHVO 53
AHNE 11
HW 2002
RFIC 17211721
DSP ICPR61_08w09
BT 06cc-P9.1
ADSP Sw 06cc-P9.1
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!


hasnain 04-17-2009 08:35

nokia 3110c flashed successfully
 
Code:

MCU Version V 07.21
MCU Date 05-11-08
Product RM-237
Manufacturer (c) Nokia.
IMEI 1, 05-11-08, RM-237, (c) Nokia.
IMEI Spare 33353431393730323433303233333900
IMEI SV 33353431393730323433303233333900
ESN OTP 3E‘B2#
PPM V 07.21, 05-11-08, RM-237, (c) Nokia. , I
CNT Content: i, V 07.21, 05-11-08, RM-237, (c) Nokia. ,
PSN MKK750347
Product Code 0544343
Module Code 0203291
Basic Product Code 0542523
PSD 0000000000000000
RETU 32
TAHVO 53
AHNE 11
HW 5003
RFIC 17211721
DSP ICPR61_08w10
BT 06cc-P9.1
ADSP Sw 06cc-P9.1
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Processing pre flash tasks...
Backing up certificates...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 02A00102AB967A564D731A1491586E2A17852DA6
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 191EC665DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0020881C00006A21, ST, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: C0E691EA16A7593A9BB28832D7312A39F7ED668D
APE Subsystem Not Found
CMT NPC Ok
CMT HWC Ok
CMT CCC Ok
CMT R&D Ok
CMT VARIANT Ok
CMT PAPUBKEYS Ok
CMT KEYS Ok
Restarting MCU...
Read all certificates finished
Certificates backup thread finished, continuing...
Backing up simlock...
Starting PM read in range 308-308...
[308] Reading 9 records
[308,0] Reading 1 bytes
[308,1] Reading 8192 bytes
[308,3] Reading 1 bytes
[308,4] Reading 1 bytes
[308,5] Reading 10 bytes
[308,6] Reading 1 bytes
[308,7] Reading 1 bytes
[308,8] Reading 1 bytes
[308,9] Reading 40 bytes
PM Read OK, Time taken 1.953s
Simlock backup OK
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm237__07.21.mcusw (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 02A00102AB967A564D731A1491586E2A17852DA6
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 191EC665DFAAF68F
rm237__07.21.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 3.25Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0020881C00006A21, ST, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: C0E691EA16A7593A9BB28832D7312A39F7ED668D
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x000006BF, NOR
EraseArea[0,CMT]: 0x000006C0-0x0001FFFF, NOR
EraseArea[0,CMT]: 0x00020000-0x0007FFFF, NOR
EraseArea[0,CMT]: 0x00080000-0x000DFFFF, NOR
EraseArea[0,CMT]: 0x00100000-0x001FFFFF, NOR
EraseArea[0,CMT]: 0x00200000-0x0031FFFF, NOR
EraseArea[0,CMT]: 0x00320000-0x0105FFFF, NOR
EraseArea[0,CMT]: 0x01060000-0x01067FFF, NOR
EraseArea[0,CMT]: 0x01068000-0x0107FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 55.906s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Skipping CMT PAPUBKEYS Certificate (already sent)...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Writing CMT PMM_CONF Certificate...
Writing CMT SBIF_CONF Certificate...
Programming Status OK!
All blocks written OK! Time taken 75.94s
Restarting MCU...
Processing rm237__07.21.mcusw (APE)...
Processing rm237__07.21.ppm_mea4 (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 02A00102AB967A564D731A1491586E2A17852DA6
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 191EC665DFAAF68F
rm237__07.21.ppm_mea4, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 3.25Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0020881C00006A21, ST, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: C0E691EA16A7593A9BB28832D7312A39F7ED668D
Started group flash erase
EraseArea[0,CMT]: 0x01080000-0x0151FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 14.125s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 14.375s
Restarting MCU...
Processing rm237__07.21.ppm_mea4 (APE)...
Processing rm237__07.21.image_mea4 (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 02A00102AB967A564D731A1491586E2A17852DA6
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 191EC665DFAAF68F
rm237__07.21.image_mea4, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 3.25Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0020881C00006A21, ST, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: C0E691EA16A7593A9BB28832D7312A39F7ED668D
Started group flash erase
EraseArea[0,CMT]: 0x01520000-0x01FDFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 46.609s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 16.313s
Restarting MCU...
Processing rm237__07.21.image_mea4 (APE)...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version V 07.21
MCU Date 05-11-08
Product RM-237
Manufacturer (c) Nokia.
IMEI 354197024302339
IMEI Spare 3A45910742033203
IMEI SV 3345910742033223F5000000
PPM V 07.21, 05-11-08, RM-237, (c) Nokia. , MEA
PSN MKK750347
Product Code 0544343
Module Code 0203291
Basic Product Code 0542523
PSD 0000000000000000
RETU 32
TAHVO 53
AHNE 11
HW 5003
RFIC 17211721
DSP ICPR61_08w10
BT 06cc-P9.1
ADSP Sw 06cc-P9.1
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!


hasnain 04-17-2009 08:35

2600c unlocked ok
 
2600c unlocked

Code:

MCU Version V 05.61
MCU Date 18-04-08
Product RM-340
Manufacturer (c) Nokia
IMEI 353122026693924
IMEI Spare 3A35210262969302
IMEI SV 3335210262969332F0000000
PPM V 05.21, 18-12-07, RM-340, (c) Nokia, IA
CNT Content: ag, V 05.61, 18-04-08, RM-340, (c) Nokia,
PSN DRK604016
Product Code 0556652
Module Code 0203632
Basic Product Code 0551000
PSD 0000000D00000000
LPSN 0
HW 1001
UEM 1328
UPP 12642
RFIC 0500
DSP P06w45.v48
LCD SUEZ
BT 2222-v101
Asic 11
HW Signature FD888DC66CEE74AF
Simlock Server SIMLOCK SERVER
Simlock Key 5555555555555555
Simlock Profile 5555555555015555
Simlock Aux 000B5555
Simlock IMEI 00553531220266939200
Simlock Key Cnt 15
Simlock FBUS Cnt 15
MCU Version V 05.61
MCU Date 18-04-08
Product RM-340
Manufacturer (c) Nokia
IMEI 353122026693924
Asic 11
HW Signature FD888DC66CEE74AF
Simlock Server SIMLOCK SERVER
Simlock Key 5555555555555555
Simlock Profile 5555555555015555
Simlock Aux 000B5555
Simlock IMEI 00553531220266939200
Simlock Key Cnt 15
Simlock FBUS Cnt 15
Selecting unlock method...
Search in: C:\Program Files\Cyclone Box\UnlockData\
Searching for: RM-340_V 05.61.unlock_img
Asking card to sign HW Signature...
Signed OK (218E118ECD30F9C3C375CA0BC3233C67F6035404)
Writing patch file...
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2208 @ 0x01000000, Samsung, SectorSize: 128kB, Ext: 00009121
FlashChip[1]: 0x00EC2208 @ 0x02000000, Samsung, SectorSize: 128kB, Ext: 00009121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2208 (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 846A8C7833FC7460D88E527F1D
MSID-Plain: 2C40BAE9004094B7A8000000
FAID-Crypted: 4439C2950D8CF38C3635116E
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x01000000-0x0101FFFF]
Erasing NOR Region [0x01080000-0x0109FFFF]
Erase taken 0.828s
Writing 10 blocks...
All blocks written OK! Time taken 6.485s
Terminating flash session
Box VPP disabled
Writing SP...
New SP Accepted OK!
Phone unlocked OK!
MCU Version V 05.61
MCU Date 18-04-08
Product RM-340
Manufacturer (c) Nokia
IMEI 353122026693924
IMEI Spare 3A35210262969302
IMEI SV 3335210262969332F0000000
PPM V 05.21, 18-12-07, RM-340, (c) Nokia, IA
CNT Content: ag, V 05.61, 18-04-08, RM-340, (c) Nokia,
PSN DRK604016
Product Code 0556652
Module Code 0203632
Basic Product Code 0551000
PSD 0000000D00000000
LPSN 0
HW 1001
UEM 1328
UPP 12642
RFIC 0500
DSP P06w45.v48
LCD SUEZ
BT 2222-v101
Asic 11
HW Signature FD888DC66CEE74AF
Simlock Server SIMLOCK SERVER
Simlock Key 0010100000000000
Simlock Profile 000000000001000B
Simlock Aux 000B5555
Simlock IMEI 00553531220266939200
Simlock Key Cnt 0
Simlock FBUS Cnt 0


hasnain 04-17-2009 08:36

N70 flashed ok
 
N70 flashed ok

Code:

Processing pre flash tasks...
Backing up certificates...
Booting RAP...
APE_SYSTEM_ASIC_ID: 17100701
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: F8B6F13A1BBAE6A57F7628E9AF8EA3790C6BDA8B
APE_ROOT_KEY_HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000
APE_ROM_ID: AB5E4ADB27A06946
CMT_SYSTEM_ASIC_ID: 000000010000022600010006000C192101002200
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000352
CMT_PUBLIC_ID: 07100211809E4951A320C906B353893505FFE9DF
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: E9EFF4BFAA5393217CA6B17755FC3E14
CMT_ROM_ID: F28A211FCEA7B19D
RAP3Gv2_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.21.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001000200000111, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC003600A500C0, Samsung, NAND
Requested Algorithm: OMAP1610 GBBM-1.8.1 ALG (APE)
FlashContent[0,APE]: 00020000000600000000000000000000, NAND
h3_sam_nand_format.fg, Type: Algorithm, Rev: 0.1.16.255, Algo: OMAP1610 FORMAT ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
CMT NPC Ok
CMT HWC Not Found
CMT CCC Not Found
CMT R&D Ok
CMT VARIANT Ok
CMT PAPUBKEYS Ok
CMT KEYS Ok
APE NPC Not Found
APE HWC Not Found
APE CCC Not Found
APE R&D Ok
APE VARIANT Not Found
APE PAPUBKEYS Ok
APE KEYS Not Found
Restarting MCU...
Read all certificates finished
Certificates backup thread finished, continuing...
Backing up simlock...
Starting PM read in range 308-308...
[308] Reading 5 records
[308,0] Reading 1 bytes
[308,1] Reading 4096 bytes
[308,2] Reading 1 bytes
[308,3] Reading 1 bytes
[308,4] Reading 1 bytes
PM Read OK, Time taken 1.0s
Simlock backup OK
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing RM84_50737301.C0 (CMT)...
Booting RAP...
APE_SYSTEM_ASIC_ID: 17100701
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: F8B6F13A1BBAE6A57F7628E9AF8EA3790C6BDA8B
APE_ROOT_KEY_HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000
APE_ROM_ID: AB5E4ADB27A06946
CMT_SYSTEM_ASIC_ID: 000000010000022600010006000C192101002200
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000352
CMT_PUBLIC_ID: 07100211809E4951A320C906B353893505FFE9DF
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: E9EFF4BFAA5393217CA6B17755FC3E14
CMT_ROM_ID: F28A211FCEA7B19D
RM84_50737301.C0, Type: Flash Image, Algo: BB5, BB5 ALGORITHM, BB5, OMAP1610 GBBM-1.8.1 ALG
RAP3Gv2_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.21.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001000200000111, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x0052B515, NOR
EraseArea[0,CMT]: 0x006A0000-0x006BFFFF, NOR
EraseArea[0,CMT]: 0x006DF000-0x006EFFFF, NOR
EraseArea[0,CMT]: 0x00700000-0x007EFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 46.515s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Skipping CMT PAPUBKEYS Certificate (already sent)...
Programming Status OK!
All blocks written OK! Time taken 32.46s
Restarting MCU...
Processing RM84_50737301.C0 (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID: 17100701
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: F8B6F13A1BBAE6A57F7628E9AF8EA3790C6BDA8B
APE_ROOT_KEY_HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000
APE_ROM_ID: AB5E4ADB27A06946
CMT_SYSTEM_ASIC_ID: 000000010000022600010006000C192101002200
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000352
CMT_PUBLIC_ID: 07100211809E4951A320C906B353893505FFE9DF
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: E9EFF4BFAA5393217CA6B17755FC3E14
CMT_ROM_ID: F28A211FCEA7B19D
RM84_50737301.C0, Type: Flash Image, Algo: BB5, BB5 ALGORITHM, BB5, OMAP1610 GBBM-1.8.1 ALG
RAP3Gv2_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.21.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001000200000111, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC003600A500C0, Samsung, NAND
Requested Algorithm: OMAP1610 GBBM-1.8.1 ALG (APE)
FlashContent[0,APE]: 00020000000600000000000000000000, NAND
h3_sam_nand_gbbm.fg, Type: Algorithm, Rev: 0.1.33.0, Algo: OMAP1610 GBBM-1.8.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x00000000-0x0000FFFF, NAND
EraseArea[0,APE]: 0x00010000-0x0001FFFF, NAND
EraseArea[0,APE]: 0x00020000-0x000203FF, NAND
EraseArea[0,APE]: 0x00050000-0x03ECFFFF, NAND
Waiting 320s for erasure finish...
Erase taken 6.859s
Writing all blocks...
Writing APE KEYS Certificate...
Writing APE X-LOADER Certificate...
Writing APE PRIMAPP Certificate...
Writing APE SOS+LOADER Certificate...
Writing APE SOS+XZIP Certificate...
Writing APE PASUBTOC Certificate...
Writing APE PAPUBKEYS Certificate...
Skipping APE PAPUBKEYS Certificate (already sent)...
Writing APE SOS*CORE Certificate...
Programming Status OK!
All blocks written OK! Time taken 47.94s
Restarting MCU...
Processing RM84_50737301.V03 (CMT)...
Processing RM84_50737301.V03 (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID: 17100701
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: F8B6F13A1BBAE6A57F7628E9AF8EA3790C6BDA8B
APE_ROOT_KEY_HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000
APE_ROM_ID: AB5E4ADB27A06946
CMT_SYSTEM_ASIC_ID: 000000010000022600010006000C192101002200
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000352
CMT_PUBLIC_ID: 07100211809E4951A320C906B353893505FFE9DF
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: E9EFF4BFAA5393217CA6B17755FC3E14
CMT_ROM_ID: F28A211FCEA7B19D
RM84_50737301.V03, Type: Flash Image, Algo: BB5, OMAP1610 GBBM-1.8.1 ALG, BB5, BB5 ALGORITHM
RAP3Gv2_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.21.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 100Kbits
FlashChip[0,CMT]: 0x0001000200000111, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC003600A500C0, Samsung, NAND
Requested Algorithm: OMAP1610 GBBM-1.8.1 ALG (APE)
FlashContent[0,APE]: 00020000000600000000000000000000, NAND
h3_sam_nand_gbbm.fg, Type: Algorithm, Rev: 0.1.33.0, Algo: OMAP1610 GBBM-1.8.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x01AE0000-0x02AFFFFF, NAND
EraseArea[0,APE]: 0x02B00000-0x03ECFFFF, NAND
Waiting 320s for erasure finish...
Erase taken 3.953s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 31.953s
Restarting MCU...
Processing RM84_50737301.UDA (CMT)...
Processing RM84_50737301.UDA (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID: 17100701
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: F8B6F13A1BBAE6A57F7628E9AF8EA3790C6BDA8B
APE_ROOT_KEY_HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000
APE_ROM_ID: AB5E4ADB27A06946
CMT_SYSTEM_ASIC_ID: 000000010000022600010006000C192101002200
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000352
CMT_PUBLIC_ID: 07100211809E4951A320C906B353893505FFE9DF
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: E9EFF4BFAA5393217CA6B17755FC3E14
CMT_ROM_ID: F28A211FCEA7B19D
RM84_50737301.UDA, Type: Flash Image, Algo: BB5, OMAP1610 GBBM-1.8.1 ALG, BB5, BB5 ALGORITHM
RAP3Gv2_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.21.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 100Kbits
FlashChip[0,CMT]: 0x0001000200000111, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC003600A500C0, Samsung, NAND
Requested Algorithm: OMAP1610 GBBM-1.8.1 ALG (APE)
FlashContent[0,APE]: 00020000000600000000000000000000, NAND
h3_sam_nand_gbbm.fg, Type: Algorithm, Rev: 0.1.33.0, Algo: OMAP1610 GBBM-1.8.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 14.563s
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version V 05wk07v48.1
MCU Date 28-08-07
Product RM-84
Manufacturer (c) Nokia.
IMEI 359380004791433
IMEI Spare 3A95830040974103
IMEI SV 3395830040974113F2000000
PSN CIH650920
Product Code 0524086
Basic Product Code 0522156
PSD 0000001700000000
RETU 32
TAHVO 52
AHNE 22
HW 6001
DSP rolf_05wk07v29p1
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!


hasnain 04-17-2009 08:37

1600 imei ????????????? repaired in secs
 
DCT4 Imei Restored in seconds
Initializing FBUS...
All initialized - Ready to work
Programming data for IMEI: 352270010854258
Found FLASH Data Rebuild Block
Found UEM Data Rebuild Block
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
PLL Factor: 3
FlashChip[0]: 0x00012A7E @ 0x01000000, AMD, SectorSize: 64kB, Ext: 00240111
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 0Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00012A7E (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.00V
Programming FLASH data...
FLASH data Programmed OK
Programming UEM data...
UEM data Programmed OK
Terminating flash session
Write UEM finished
MCU Version V 5.03
MCU Date 21-04-06
Product RH-64
Manufacturer (c) NMP
IMEI 352270010854258
Asic 2
HW Signature 8FC9D0E5F56174B3
Simlock Server
Simlock Key 0010100000000000
Simlock Profile 0000000000000002
Simlock Aux 00020000
Simlock IMEI 00003522700108542500
Simlock Key Cnt 0
Simlock FBUS Cnt 0

hasnain 04-17-2009 08:38

2600C successfully flashed
 
2600C successfully flashed

Code:

Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm340__05.61.mcusw, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2208 @ 0x01000000, Samsung, SectorSize: 128kB, Ext: 00009121
FlashChip[1]: 0x00EC2208 @ 0x02000000, Samsung, SectorSize: 128kB, Ext: 00009121
Signature: AD7EB61B00FF10400000000000000000
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2208 (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 847D68BB4038D1F794F0E04B5C
MSID-Plain: 2C40BAE9005ACD9BA8000000
FAID-Crypted: 68906042BBA30A1C4F9E115F
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x01000000-0x0101FFFF]
Erasing NOR Region [0x01020000-0x01C3FFFF]
Erase taken 33.766s
Writing 344 blocks...
All blocks written OK! Time taken 388.313s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm340__05.61.image_ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2208 @ 0x01000000, Samsung, SectorSize: 128kB, Ext: 00009121
FlashChip[1]: 0x00EC2208 @ 0x02000000, Samsung, SectorSize: 128kB, Ext: 00009121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2208 (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.02V
MSID-Crypted: 843232CDF216EC1CD567F7497E
MSID-Plain: D26EBAF1005ACD9BAA000610
FAID-Crypted: F65F397CEA568D0BDB6BF6B2
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x02000000-0x02DBFFFF]
Erasing NOR Region [0x02DC0000-0x02F9FFFF]
Erase taken 45.953s
File Sector Size: 128kB, Flash Chip Sector Size: 128kB
CNT Convertion not needed
Writing 200 blocks...
All blocks written OK! Time taken 88.563s
Terminating flash session
Extracting Content Package...
CP Extract Failed -> CP Server not exists
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm340__05.61.ppm_ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2208 @ 0x01000000, Samsung, SectorSize: 128kB, Ext: 00009121
FlashChip[1]: 0x00EC2208 @ 0x02000000, Samsung, SectorSize: 128kB, Ext: 00009121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2208 (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 84D4777A19CE31F37245CD59BD
MSID-Plain: 3E4EBAE9005ACD9BA8000000
FAID-Crypted: 112B19390666D0BD614991B5
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01C40000-0x01FFFFFF]
Erase taken 10.640s
Writing 91 blocks...
All blocks written OK! Time taken 90.360s
Terminating flash session
Box VPP disabled
Processing post-flash tasks...
Setting Factory Defaults...
Factory defaults OK
Post-flash tasks finished...
Flash successfully finished!
MCU Version V 05.61
MCU Date 18-04-08
Product RM-340
Manufacturer (c) Nokia
IMEI 354170027490088
IMEI Spare 3A45710072940008
IMEI SV 3345710072940038F0000000
PPM V 05.61, 18-04-08, RM-340, (c) Nokia, IA
CNT Content: ia, V 05.61, 18-04-08, RM-340, (c) Nokia,
PSN DLQ913079
Product Code 0556643
Module Code 0203632
Basic Product Code 0551000
PSD 0000000D00000000
LPSN 0
HW 1002
UEM 1328
UPP 12642
RFIC 0500
DSP P06w45.v48
LCD SUEZ
BT 2222-v101
Asic 11
HW Signature 3FD992BC11ECA738
Simlock Server SIMLOCK SERVER
Simlock Key 0010100000000000
Simlock Profile 800000000001000B
Simlock Aux 000B5555
Simlock IMEI 00553541700274900800
Simlock Key Cnt 0
Simlock FBUS Cnt 0


hasnain 04-17-2009 08:38

2630 flashed ok
 
2630 flashed

Code:

MCU Version V 05.61
MCU Date 18-04-08
Product RM-340
Manufacturer (c) Nokia
IMEI 353122026693924
IMEI Spare 3A35210262969302
IMEI SV 3335210262969332F0000000
PPM V 05.21, 18-12-07, RM-340, (c) Nokia, IA
CNT Content: ag, V 05.61, 18-04-08, RM-340, (c) Nokia,
PSN DRK604016
Product Code 0556652
Module Code 0203632
Basic Product Code 0551000
PSD 0000000D00000000
LPSN 0
HW 1001
UEM 1328
UPP 12642
RFIC 0500
DSP P06w45.v48
LCD SUEZ
BT 2222-v101
Asic 11
HW Signature FD888DC66CEE74AF
Simlock Server SIMLOCK SERVER
Simlock Key 0010100000000000
Simlock Profile 000000000001000B
Simlock Aux 000B5555
Simlock IMEI 00553531220266939200
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Processing pre-flash tasks...
Pre-flash tasks finished
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm340__05.21.mcusw, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2208 @ 0x01000000, Samsung, SectorSize: 128kB, Ext: 00009121
FlashChip[1]: 0x00EC2208 @ 0x02000000, Samsung, SectorSize: 128kB, Ext: 00009121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2208 (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 84782D4EC6651A6864122128B3
MSID-Plain: 2C40BAE9004094B7A9000000
FAID-Crypted: 90524608620BA634187FE753
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x01000000-0x0101FFFF]
Erasing NOR Region [0x01020000-0x01C3FFFF]
Erase taken 38.562s
Writing 344 blocks...
All blocks written OK! Time taken 275.312s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm340__05.21.image_ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2208 @ 0x01000000, Samsung, SectorSize: 128kB, Ext: 00009121
FlashChip[1]: 0x00EC2208 @ 0x02000000, Samsung, SectorSize: 128kB, Ext: 00009121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2208 (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.00V
MSID-Crypted: 84B3C7F82504D41D0874F7E62D
MSID-Plain: D26EBAF1004094B7AA000610
FAID-Crypted: 5C92E330228E7159B8D1909E
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x02000000-0x02DBFFFF]
Erasing NOR Region [0x02DC0000-0x02F9FFFF]
Erase taken 50.531s
File Sector Size: 128kB, Flash Chip Sector Size: 128kB
CNT Convertion not needed
Writing 208 blocks...
All blocks written OK! Time taken 70.62s
Terminating flash session
Extracting Content Package...
CP Extract Failed -> CP Server not exists
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm340__05.21.ppm_ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2208 @ 0x01000000, Samsung, SectorSize: 128kB, Ext: 00009121
FlashChip[1]: 0x00EC2208 @ 0x02000000, Samsung, SectorSize: 128kB, Ext: 00009121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2208 (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.02V
MSID-Crypted: 841782822587FD06F8A32FC629
MSID-Plain: 3E4EBAE9004094B7AA000000
FAID-Crypted: 1937C6C93C65BFD414F88C21
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01C40000-0x01FFFFFF]
Erase taken 11.922s
Writing 91 blocks...
All blocks written OK! Time taken 67.938s
Terminating flash session
Box VPP disabled
Processing post-flash tasks...
Setting Factory Defaults...
Factory defaults OK
Post-flash tasks finished...
Flash successfully finished!


hasnain 04-17-2009 08:39

2630 flashed + unlocked ok
 
2630 flashed + unlocked

Code:

Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm298__05.62.mcusw, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x0020883C @ 0x01000000, ST, SectorSize: 128kB, Ext: 00009321
FlashChip[1]: 0x0020883C @ 0x02000000, ST, SectorSize: 128kB, Ext: 00009321
Signature: AD7EB61B00FF10400000000000000000
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x0020883C (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 84D1B3D91BA0654CC335E0EAB4
MSID-Plain: 2C40BAE900D06D4EA9000000
FAID-Crypted: 2ED1E994B9FC11B212AF2402
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x01000000-0x0101FFFF]
Erasing NOR Region [0x01020000-0x01C3FFFF]
Erase taken 107.641s
Writing 343 blocks...
All blocks written OK! Time taken 65.266s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm298__05.62.image_ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x0020883C @ 0x01000000, ST, SectorSize: 128kB, Ext: 00009321
FlashChip[1]: 0x0020883C @ 0x02000000, ST, SectorSize: 128kB, Ext: 00009321
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x0020883C (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.00V
MSID-Crypted: 8417BF11891EB032D510C0175E
MSID-Plain: D26EBAF100D06D4EAA000610
FAID-Crypted: 993C7A7D650FCF14A0E68DCA
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x02000000-0x02DBFFFF]
Erasing NOR Region [0x02DC0000-0x02F9FFFF]
Erase taken 135.328s
File Sector Size: 128kB, Flash Chip Sector Size: 128kB
CNT Convertion not needed
Writing 200 blocks...
All blocks written OK! Time taken 19.469s
Terminating flash session
Extracting Content Package...
CP Extract Failed -> CP Server not exists
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm298__05.62.ppm_ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x0020883C @ 0x01000000, ST, SectorSize: 128kB, Ext: 00009321
FlashChip[1]: 0x0020883C @ 0x02000000, ST, SectorSize: 128kB, Ext: 00009321
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x0020883C (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.00V
MSID-Crypted: 841019C73CAA4E546954CC6F07
MSID-Plain: 3E4EBAE900D06D4EA9000000
FAID-Crypted: CE0488F9007EFAFCAA9B934D
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01C40000-0x01FFFFFF]
Erase taken 34.563s
Writing 90 blocks...
All blocks written OK! Time taken 17.78s
Terminating flash session
Box VPP disabled
Processing post-flash tasks...
Setting Factory Defaults...
Factory defaults OK
Unlocking...
MCU Version V 05.62
MCU Date 02-07-08
Product RM-298
Manufacturer (c) Nokia
IMEI 359342029758938
Asic 11
HW Signature 2273ED7CEC3D8182
Simlock Server SIMLOCK SERVER
Simlock Key 0010100000000000
Simlock Profile 800000000001000B
Simlock Aux 000B5555
Simlock IMEI 00553593420297589300
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Selecting unlock method...
Search in: C:\Program Files\Cyclone Box\UnlockData\
Searching for: RM-298_V 05.62.unlock_img
Asking card to sign HW Signature...
Signed OK (0C553010E40B20195D09345C8D061EE8854A2E6E)
Writing patch file...
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x0020883C @ 0x01000000, ST, SectorSize: 128kB, Ext: 00009321
FlashChip[1]: 0x0020883C @ 0x02000000, ST, SectorSize: 128kB, Ext: 00009321
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x0020883C (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 84D1B3D91BA0654CC335E0EAB4
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: 2ED1E994B9FC11B212AF2402
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x01000000-0x0101FFFF]
Erasing NOR Region [0x01080000-0x0109FFFF]
Erase taken 2.203s
Writing 10 blocks...
All blocks written OK! Time taken 1.563s
Terminating flash session
Box VPP disabled
Writing SP...
New SP Accepted OK!
Phone unlocked OK!
Unlock thread finished, continuing...
Post-flash tasks finished...
Flash successfully finished!


hasnain 04-17-2009 08:41

6610i flashed successfully
 
6610i flashed successfully

Code:

Booting UPP...
UPP ID: 1120 [HW_UPP8M_v2]
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
PLL Factor: 1
FlashChip[0]: 0x00EC22F8 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00007011
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 4Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22F8 (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.07V
Terminating flash session
Boot operation took 6.110s
Check Flashing Bus finished
Processing pre-flash tasks...
Pre-flash tasks finished
Booting UPP...
UPP ID: 1120 [HW_UPP8M_v2]
rm-3704.200, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 1
FlashChip[0]: 0x00EC22F8 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00007011
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22F8 (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.02V
MSID-Crypted: 84521831D4EFF98575921C8D1A
MSID-Plain: 82A9BAE900D23D52A9000000
FAID-Crypted: CF91BA9C6A21458CFAFB6AC4
Flashbus Write baud set to 6.50Mbits
3 Region(s) to erase
Erasing NOR Region [0x01000000-0x0100FFFF]
Erasing NOR Region [0x01010000-0x017FFFFF]
Erasing NOR Region [0x01A00000-0x01FDFFFF]
Erase taken 131.281s
Writing 385 blocks...
All blocks written OK! Time taken 43.672s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 1120 [HW_UPP8M_v2]
rm-3704.20.ucp_g, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 1
FlashChip[0]: 0x00EC22F8 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00007011
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22F8 (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.02V
MSID-Crypted: 846B803F20D394D4BE786BA09C
MSID-Plain: 82A9BAE900D23D52AA000000
FAID-Crypted: 643551A29DA16BE454D7DF61
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01800000-0x019FFFFF]
Erase taken 19.328s
Writing 27 blocks...
All blocks written OK! Time taken 2.875s
Terminating flash session
Extracting Content Package...
CP Extract Failed -> CP Server not exists
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 1120 [HW_UPP8M_v2]
rm-3704.20g, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 1
FlashChip[0]: 0x00EC22F8 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00007011
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22F8 (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 846B803F20D394D4BE786BA09C
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: 643551A29DA16BE454D7DF61
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01800000-0x019FFFFF]
Erase taken 19.78s
Writing 69 blocks...
All blocks written OK! Time taken 7.468s
Terminating flash session
Box VPP disabled
Processing post-flash tasks...
Setting Factory Defaults...
Factory defaults OK
Post-flash tasks finished...
Flash successfully finished!


hasnain 04-17-2009 08:42

1110i erased and flashed ok
 
1110i erased and flashed ok

Code:

Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
PLL Factor: 3
FlashChip[0]: 0x00EC2268 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
PLL Factor: 3
FlashChip[0]: 0x00EC2268 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2268 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 4Kbits
Flashbus Write baud set to 1.0Mbits
Erasing NOR Region [0x01000000-0x013FFFFF]
Erase All Chips finished
 
 
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
rh93_07.020, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2268 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00000121
Signature: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2268 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 8459D1181AD335455B7289BA44
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: AF9D08DC6E6D7F5587F1F51F
Flashbus Write baud set to 6.50Mbits
5 Region(s) to erase
Erasing NOR Region [0x01000000-0x0100FFFF]
Erasing NOR Region [0x01010000-0x013BFFFF]
Erasing NOR Region [0x013C0000-0x013EFFFF]
Erasing NOR Region [0x017C0000-0x017EFFFF]
Erasing NOR Region [0x01FC0000-0x01FEFFFF]
Erase taken 24.750s
Writing 122 blocks...
All blocks written OK! Time taken 10.937s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
rh930_nai7.02ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2268 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2268 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 84AB6021797F8F0699ABE9C031
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: E6ECD46CB031772894795C67
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01380000-0x013BFFFF]
Erase taken 1.609s
Writing 10 blocks...
All blocks written OK! Time taken 0.859s
Terminating flash session
Extracting Content Package...
CP Server: File Server fake reply for CUI phone.
CP Extract Failed -> CP Not Extracted, Code: 1
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
rh93_07.02ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2268 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2268 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 84AB6021797F8F0699ABE9C031
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: E6ECD46CB031772894795C67
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x011E0000-0x011EFFFF]
Erasing NOR Region [0x011F0000-0x0137FFFF]
Erase taken 10.359s
Writing 82 blocks...
All blocks written OK! Time taken 6.969s
Terminating flash session
Box VPP disabled
Processing post-flash tasks...
Setting Factory Defaults...
Factory defaults OK
Post-flash tasks finished...
Flash successfully finished!


hasnain 04-17-2009 08:42

2610 flashed and unlocked ok
 
2610 flashed and unlocked
Code:

MCU Version V 04.90
MCU Date 10-01-07
Product RH-86
Manufacturer (c) Nokia.
IMEI 355528010258078
IMEI Spare 3A55250801520807
IMEI SV 3355250801520837F2000000
PPM V 04.90, 10-01-07, RH-86_87, (c) Nokia. , IA
CNT Content: ia, V 04.90, 10-01-07, RH-86_87, (c) Nokia.
PSN KAI508992
Product Code 0533259
Module Code 0202930
Basic Product Code 0530409
PSD 0000000D00000000
HW 9001
UEM 1328
UPP 12352
RFIC 0500
DSP P05w45.v45
LCD ELBE
Asic 11
HW Signature 4ECF82953E763D63
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 0010100000000000
Simlock Profile 800000000001000B
Simlock Aux 000B5555
Simlock IMEI 00553555280102580700
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Processing pre-flash tasks...
Pre-flash tasks finished
Booting UPP...
UPP ID: 3040 [HW_UNKNOWN]
rh86_87__07.11.mcusw, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC22E8 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00007121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22E8 (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.00V
MSID-Crypted: 8447B528BB2E252A6CF1D4A9F5
MSID-Plain: 37DFBAE900524BDDA8000000
FAID-Crypted: 7681A7F7BD3EC3ADFC30C99D
Flashbus Write baud set to 6.50Mbits
3 Region(s) to erase
Erasing NOR Region [0x01000000-0x0101FFFF]
Erasing NOR Region [0x01020000-0x018DFFFF]
Erasing NOR Region [0x01EE0000-0x01FDFFFF]
Erase taken 74.31s
Writing 554 blocks...
All blocks written OK! Time taken 49.344s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 3040 [HW_UNKNOWN]
rh86_87__07.11.image_ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC22E8 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00007121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22E8 (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.02V
MSID-Crypted: 846D281C1B6776CD75422758E0
MSID-Plain: D26EBAF100524BDDAA000610
FAID-Crypted: F29385FE39D6B837D06AF9AF
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01B80000-0x01EDFFFF]
Erase taken 21.719s
File Sector Size: 64kB, Flash Chip Sector Size: 64kB
CNT Convertion not needed
Writing 80 blocks...
All blocks written OK! Time taken 7.422s
Terminating flash session
Extracting Content Package...
CP Extract Failed -> CP Server not exists
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 3040 [HW_UNKNOWN]
rh86_87__07.11.ppm_ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC22E8 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00007121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22E8 (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 84E9B23CDE7E311164FC532F72
MSID-Plain: 3E4EBAE900524BDDA9000000
FAID-Crypted: 3601E21465AA21557A188625
Flashbus Write baud set to 3.25Mbits
1 Region(s) to erase
Erasing NOR Region [0x018E0000-0x01B7FFFF]
Erase taken 19.922s
Writing 99 blocks...
All blocks written OK! Time taken 9.125s
Terminating flash session
Box VPP disabled
Processing post-flash tasks...
Setting Factory Defaults...
Factory defaults OK
Unlocking...
MCU Version V 07.11
MCU Date 05-11-08
Product RH-86
Manufacturer (c) Nokia.
IMEI 355528010258078
Asic 11
HW Signature 4ECF82953E763D63
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 0010100000000000
Simlock Profile 800000000001000B
Simlock Aux 000B5555
Simlock IMEI 00553555280102580700
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Selecting unlock method...
Search in: C:\Program Files\Cyclone Box\UnlockData\
Searching for: RH-86_V 07.11.unlock_img
Asking card to sign HW Signature...
Signed OK (D2884B725A07188A8421A1F7029644DC47E1D238)
Writing patch file...
Booting UPP...
UPP ID: 3040 [HW_UNKNOWN]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC22E8 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00007121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22E8 (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 8447B528BB2E252A6CF1D4A9F5
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: 7681A7F7BD3EC3ADFC30C99D
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x010A0000-0x010BFFFF]
Erase taken 0.953s
Writing 8 blocks...
All blocks written OK! Time taken 0.906s
Terminating flash session
Box VPP disabled
Writing SP...
New SP Accepted OK!
Writing restore file...
Booting UPP...
UPP ID: 3040 [HW_UNKNOWN]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC22E8 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00007121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22E8 (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 8447B528BB2E252A6CF1D4A9F5
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: 7681A7F7BD3EC3ADFC30C99D
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x010A0000-0x010BFFFF]
Erase taken 0.953s
Writing 8 blocks...
All blocks written OK! Time taken 0.735s
Terminating flash session
Box VPP disabled
Phone unlocked OK!
Unlock thread finished, continuing...
Post-flash tasks finished...
Flash successfully finished!


lasfar 04-17-2009 16:56

n95 8G :

Code:

Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision:
Handling device: [Cyclone Team], [
Card is activated
Box is activated
Started box selftests procedure
USB Voltage    5,04v    PASSED
MCU Voltage    3,27v    PASSED
Core Voltage    1,79v    PASSED
VBAT Voltage    0,01v    PASSED
VBAT Voltage    4,92v    PASSED
Box VPP disabled
VPP Voltage    0,04v    PASSED
Internal Box VPP Enabled
VPP Voltage    4,83v    PASSED
Box VPP disabled
VPP Voltage    0,04v    PASSED
External Box VPP Enabled
VPP Voltage    0,00v    FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Initializing FBUS...
All initialized - Ready to work
Failed to read info -> Phone not detected
Failed to read info -> Phone not detected
MCU Version    V 06wk41v64.1
MCU Date    26-09-08
Product        RM-320
Manufacturer    (c) Nokia
IMEI        41v64.1, 26-09-08, RM-320, (c) Nokia
IMEI Spare    33353638343230323338303737343100
IMEI SV        3A65480232087704
ESN OTP    3eH2w
Failed to read info -> Failed to read extended info
MCU Version    V 06wk41v64.1
MCU Date    26-09-08
Product        RM-320
Manufacturer    (c) Nokia
IMEI        356842023807741
IMEI Spare    3A65480232087704
IMEI SV        3365480232087714F2000000
PSN        SHG437010
Product Code    0557631
Basic Product Code    0548236
PSD        0000000000000000
LPSN        0
WLAN MAC    0022FD4CBA13
RETU        16
TAHVO        22
AHNE        11
HW        4120
RFIC        17141715
DSP        aino_mc.ICPR62_08w28
Simlock Server    SIMLOCK SERVER
Simlock Key    2081000000000000
Simlock Profile    0000000000000000
Simlock Key Cnt    0
Simlock FBUS Cnt    0
Booting RAP...
APE_SYSTEM_ASIC_ID:    24200705
APE_ASIC_MODE_ID:    00
APE_PUBLIC_ID:        363A07F9059D0ECB74D6B45EC48718F024FC1B85
APE_ROOT_KEY_HASH:    BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:    000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:        00000296
CMT_EM_ASIC_ID:        00000B22
CMT_PUBLIC_ID:        1570010C75B90158822370271EBD417BE9789FA5
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:        4B9B75103E691FF8
Check BB5 Flashing Bus Finished OK
Processing pre flash tasks...
Backing up certificates...
Booting RAP...
APE_SYSTEM_ASIC_ID:    24200705
APE_ASIC_MODE_ID:    00
APE_PUBLIC_ID:        363A07F9059D0ECB74D6B45EC48718F024FC1B85
APE_ROOT_KEY_HASH:    BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:    000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:        00000296
CMT_EM_ASIC_ID:        00000B22
CMT_PUBLIC_ID:        1570010C75B90158822370271EBD417BE9789FA5
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:        4B9B75103E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
omap2420_m1_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.41.0, Algo: BB5
FlashChip[0,APE]: 0x00EC004000220000, Samsung, NAND
Requested Algorithm: OMAP2420 UNISTORE-II-1.5.1 ALG (APE)
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
teflon_sam_nand_xsr151_m1.fg, Type: Algorithm, Rev: 0.1.57.0, Algo: OMAP2420 UNISTORE-II-1.5.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
CMT NPC Ok
CMT HWC Ok
CMT CCC Ok
CMT R&D Ok
CMT VARIANT Ok
CMT PAPUBKEYS Ok
CMT KEYS Ok
APE NPC Ok
APE HWC Ok
APE CCC Ok
APE R&D Ok
APE VARIANT Not Found
APE PAPUBKEYS Ok
APE KEYS Ok
Restarting MCU...
Read all certificates finished
Certificates backup thread finished, continuing...
Backing up simlock...
Starting PM read in range 308-308...
[308] Reading 10 records
[308,0] Reading 1 bytes
[308,1] Reading 8192 bytes
[308,2] Reading 1 bytes
[308,3] Reading 1 bytes
[308,4] Reading 1 bytes
[308,5] Reading 10 bytes
[308,6] Reading 1 bytes
[308,7] Reading 1 bytes
[308,8] Reading 1 bytes
[308,9] Reading 40 bytes
PM Read OK, Time taken 2.828s
Starting PM read in range 120-120...
[120] Reading 4 records
[120,0] Reading 50593796 bytes
Failed to read PM -> Failed to read PM Record 120,0
Simlock backup OK
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing RM-320_31.0.015_PR.C0R (CMT)...
Booting RAP...
APE_SYSTEM_ASIC_ID:    24200705
APE_ASIC_MODE_ID:    00
APE_PUBLIC_ID:        363A07F9059D0ECB74D6B45EC48718F024FC1B85
APE_ROOT_KEY_HASH:    BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:    000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:        00000296
CMT_EM_ASIC_ID:        00000B22
CMT_PUBLIC_ID:        1570010C75B90158822370271EBD417BE9789FA5
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:        4B9B75103E691FF8
RM-320_31.0.015_PR.C0R, Type: Flash Image, Algo: BB5, XSR 1.5, BB5, OMAP2420 UNISTORE-II-1.5.1 ALG
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00080000-0x007CF385, NOR
EraseArea[0,CMT]: 0x00000000-0x0005FFFF, NOR
EraseArea[0,CMT]: 0x00880000-0x00FDFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 41.297s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 34.656s
Restarting MCU...
Processing RM-320_31.0.015_PR.C0R (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID:    24200705
APE_ASIC_MODE_ID:    00
APE_PUBLIC_ID:        363A07F9059D0ECB74D6B45EC48718F024FC1B85
APE_ROOT_KEY_HASH:    BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:    000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:        00000296
CMT_EM_ASIC_ID:        00000B22
CMT_PUBLIC_ID:        1570010C75B90158822370271EBD417BE9789FA5
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:        4B9B75103E691FF8
RM-320_31.0.015_PR.C0R, Type: Flash Image, Algo: BB5, XSR 1.5, BB5, OMAP2420 UNISTORE-II-1.5.1 ALG
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
omap2420_m1_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.41.0, Algo: BB5
FlashChip[0,APE]: 0x00EC004000220000, Samsung, NAND
Requested Algorithm: OMAP2420 UNISTORE-II-1.5.1 ALG (APE)
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
teflon_sam_nand_xsr151_m1.fg, Type: Algorithm, Rev: 0.1.57.0, Algo: OMAP2420 UNISTORE-II-1.5.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x00000200-0x0000AFFF, NAND
EraseArea[0,APE]: 0x0000B800-0x000AFFFF, NAND
EraseArea[0,APE]: 0x00000000-0x00000FFF, NAND
EraseArea[0,APE]: 0x0000D800-0x0000E9FF, NAND
EraseArea[0,APE]: 0x00080000-0x000BFFFF, NAND
EraseArea[0,APE]: 0x000E0000-0x0045FFFF, NAND
EraseArea[0,APE]: 0x004C0000-0x0073FFFF, NAND
EraseArea[0,APE]: 0x00A40000-0x06F3FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 0.328s
Writing all blocks...
Writing APE X-LOADER Certificate...
Writing APE KEYS Certificate...
Writing APE PRIMAPP Certificate...
Writing APE X-LOADER Certificate...
Writing APE KEYS Certificate...
Writing APE PRIMAPP Certificate...
Writing APE SOS+XZIP Certificate...
Writing APE PASUBTOC Certificate...
Writing APE PAPUBKEYS Certificate...
Writing APE SOS+UPDAPP Certificate...
Writing APE SOS+CORE Certificate...
Writing APE SOS+ROFS Certificate...
Programming Status OK!
All blocks written OK! Time taken 97.781s
Restarting MCU...
Processing RM-320_31.0.015_PR.v08 (CMT)...
Processing RM-320_31.0.015_PR.v08 (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID:    24200705
APE_ASIC_MODE_ID:    00
APE_PUBLIC_ID:        363A07F9059D0ECB74D6B45EC48718F024FC1B85
APE_ROOT_KEY_HASH:    BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:    000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:        00000296
CMT_EM_ASIC_ID:        00000B22
CMT_PUBLIC_ID:        1570010C75B90158822370271EBD417BE9789FA5
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:        4B9B75103E691FF8
RM-320_31.0.015_PR.v08, Type: Flash Image, Algo: BB5, OMAP2420 UNISTORE-II-1.5.1 ALG, BB5, XSR 1.5
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
omap2420_m1_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.41.0, Algo: BB5
FlashChip[0,APE]: 0x00EC004000220000, Samsung, NAND
Requested Algorithm: OMAP2420 UNISTORE-II-1.5.1 ALG (APE)
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
teflon_sam_nand_xsr151_m1.fg, Type: Algorithm, Rev: 0.1.57.0, Algo: OMAP2420 UNISTORE-II-1.5.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x05140000-0x06F3FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 0.78s
Writing all blocks...
Writing APE SOS+ROFX Certificate...
Programming Status OK!
All blocks written OK! Time taken 17.219s
Restarting MCU...
Processing RM320_31.0.002_025_zzz_U03_uda.fpsx (CMT)...
Processing RM320_31.0.002_025_zzz_U03_uda.fpsx (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID:    24200705
APE_ASIC_MODE_ID:    00
APE_PUBLIC_ID:        363A07F9059D0ECB74D6B45EC48718F024FC1B85
APE_ROOT_KEY_HASH:    BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:    000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:        00000296
CMT_EM_ASIC_ID:        00000B22
CMT_PUBLIC_ID:        1570010C75B90158822370271EBD417BE9789FA5
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:        4B9B75103E691FF8
RM320_31.0.002_025_zzz_U03_uda.fpsx, Type: Flash Image, Algo: BB5, OMAP2420 UNISTORE-II-1.5.1 ALG, BB5, XSR 1.5
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
omap2420_m1_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.41.0, Algo: BB5
FlashChip[0,APE]: 0x00EC004000220000, Samsung, NAND
Requested Algorithm: OMAP2420 UNISTORE-II-1.5.1 ALG (APE)
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
teflon_sam_nand_xsr151_m1.fg, Type: Algorithm, Rev: 0.1.57.0, Algo: OMAP2420 UNISTORE-II-1.5.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Started group flash erase
EraseArea[0,APE]: 0x06F40000-0x0F87FFFF, NAND
Erase Certificate: SOS-USER (APE)
Waiting 320s for erasure finish...
Erase taken 0.625s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 42.969s
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version    V 06wk41v64.1
MCU Date    26-09-08
Product        RM-320
Manufacturer    (c) Nokia
IMEI        356842023807741
IMEI Spare    3A65480232087704
IMEI SV        3365480232087714F2000000
PSN        SHG437010
Product Code    0557631
Basic Product Code    0548236
PSD        0000000000000000
LPSN        0
WLAN MAC    0022FD4CBA13
RETU        16
TAHVO        22
AHNE        11
HW        4120
RFIC        17141715
DSP        aino_mc.ICPR62_08w28
Simlock Server    SIMLOCK SERVER
Simlock Key    2081000000000000
Simlock Profile    0000000000000000
Simlock Key Cnt    0
Simlock FBUS Cnt    0
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!

THANK YOU

hasnain 04-18-2009 10:48

1112 flashed and unlocked perfect after latest main firmware of cyclone
 
Code:

Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
rh93_07.020, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2268 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2268 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.00V
MSID-Crypted: 8400BF71306E7922771ABDBE53
MSID-Plain: 3E4EBAE90091061DAA000000
FAID-Crypted: 5A7B26679CD58EA15FFC55AF
Flashbus Write baud set to 6.50Mbits
5 Region(s) to erase
Erasing NOR Region [0x01000000-0x0100FFFF]
Erasing NOR Region [0x01010000-0x013BFFFF]
Erasing NOR Region [0x013C0000-0x013EFFFF]
Erasing NOR Region [0x017C0000-0x017EFFFF]
Erasing NOR Region [0x01FC0000-0x01FEFFFF]
Erase taken 23.219s
Writing 122 blocks...
All blocks written OK! Time taken 10.781s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
rh930_nai7.02ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2268 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2268 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 8403DE503F13CA8E401B26D71A
MSID-Plain: 3E4EBAE90091061DA8000000
FAID-Crypted: 1E408C8D7EF5A33B94C75827
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01380000-0x013BFFFF]
Erase taken 1.469s
Writing 10 blocks...
All blocks written OK! Time taken 0.859s
Terminating flash session
Extracting Content Package...
CP Server: File Server fake reply for CUI phone.
CP Extract Failed -> CP Not Extracted, Code: 1
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
rh93_07.02ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2268 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2268 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 8403DE503F13CA8E401B26D71A
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: 1E408C8D7EF5A33B94C75827
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x011E0000-0x011EFFFF]
Erasing NOR Region [0x011F0000-0x0137FFFF]
Erase taken 9.719s
Writing 82 blocks...
All blocks written OK! Time taken 7.313s
Terminating flash session
Box VPP disabled
Processing post-flash tasks...
Setting Factory Defaults...
Factory defaults OK
Unlocking...
MCU Version V 7.02
MCU Date 10-12-07
Product  RH-93
Manufacturer (c) NMP
IMEI  353973014807433
Asic  2
HW Signature 1C1374E945B5FB75
Simlock Server
Simlock Key 0010100000000000
Simlock Profile 0000000000010002
Simlock Aux 00023031
Simlock IMEI 00003539730148074300
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Selecting unlock method...
Search in: C:\Program Files\Cyclone Box\UnlockData\
Searching for: RH-93_V 7.02.unlock_img
Asking card to sign HW Signature...
Signed OK (1AC2B5A1D4EA1CBF768075FECDA1210B79B4AA28)
Writing patch file...
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2268 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2268 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 8400BF71306E7922771ABDBE53
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: 5A7B26679CD58EA15FFC55AF
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01140000-0x0115FFFF]
Erase taken 0.766s
Writing 8 blocks...
All blocks written OK! Time taken 0.703s
Terminating flash session
Box VPP disabled
Writing SP...
New SP Accepted OK!
Writing restore file...
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2268 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2268 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.02V
MSID-Crypted: 8400BF71306E7922771ABDBE53
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: 5A7B26679CD58EA15FFC55AF
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01140000-0x0115FFFF]
Erase taken 0.750s
Writing 8 blocks...
All blocks written OK! Time taken 0.688s
Terminating flash session
Box VPP disabled
Phone unlocked OK!
Unlock thread finished, continuing...
Post-flash tasks finished...
Flash successfully finished!


amralkareem 04-18-2009 12:14

6233 work good

Code:

Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.6664
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v1.01, (Apr 18 2009 02:44:06, gcc-4.2.2, RTOS V5.1.0), Type: Signed Production Application
Box Serial Number: C000011A
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk32
Initializing security card...
Card Serial Number: D10002E1
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage        4.84v        PASSED
MCU Voltage        3.28v        PASSED
Core Voltage        1.83v        PASSED
VBAT Voltage        1.54v        PASSED
VBAT Voltage        4.66v        PASSED
Box VPP disabled
VPP Voltage        0.00v        PASSED
Internal Box VPP Enabled
VPP Voltage        4.66v        PASSED
Box VPP disabled
VPP Voltage        0.04v        PASSED
External Box VPP Enabled
VPP Voltage        0.02v        FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Initializing FBUS...
All initialized - Ready to work
Booting RAP...
Failed to Check BB5 Flashing Bus  -> RAP Not Responding
Booting RAP...
Failed to Check BB5 Flashing Bus  -> RAP Not Responding
Booting RAP...
Failed to Check BB5 Flashing Bus  -> RAP Not Responding
Booting RAP...
Failed to Check BB5 Flashing Bus  -> RAP Not Responding
Booting RAP...
CMT_SYSTEM_ASIC_ID:        000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:                00000232
CMT_EM_ASIC_ID:                00000353
CMT_PUBLIC_ID:                14900214506D5150004C79747A14B353F45C8F96
CMT_ASIC_MODE_ID:        00
CMT_ROOT_KEY_HASH:        BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:                273F6D55DFAAF68F
Check BB5 Flashing Bus Finished OK
Booting RAP...
CMT_SYSTEM_ASIC_ID:        000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:                00000232
CMT_EM_ASIC_ID:                00000353
CMT_PUBLIC_ID:                14900214506D5150004C79747A14B353F45C8F96
CMT_ASIC_MODE_ID:        00
CMT_ROOT_KEY_HASH:        BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:                273F6D55DFAAF68F
Check BB5 Flashing Bus Finished OK
Booting RAP...
CMT_SYSTEM_ASIC_ID:        000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:                00000232
CMT_EM_ASIC_ID:                00000353
CMT_PUBLIC_ID:                14900214506D5150004C79747A14B353F45C8F96
CMT_ASIC_MODE_ID:        00
CMT_ROOT_KEY_HASH:        BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:                273F6D55DFAAF68F
Check BB5 Flashing Bus Finished OK
Processing pre flash tasks...
Backing up certificates...
Booting RAP...
CMT_SYSTEM_ASIC_ID:        000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:                00000232
CMT_EM_ASIC_ID:                00000353
CMT_PUBLIC_ID:                14900214506D5150004C79747A14B353F45C8F96
CMT_ASIC_MODE_ID:        00
CMT_ROOT_KEY_HASH:        BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:                273F6D55DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220800000121, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 2F36DDC4990FD844712A61A80C033211BD9602E3
APE Subsystem Not Found
CMT NPC Ok
CMT HWC Not Found
CMT CCC Not Found
CMT R&D Ok
CMT VARIANT Ok
CMT PAPUBKEYS Ok
CMT KEYS Ok
Restarting MCU...
Read all certificates finished
Certificates backup thread finished, continuing...
Backing up simlock...
Starting PM read in range 308-308...
[308] Reading 9 records
[308,0] Reading 1 bytes
[308,1] Reading 8192 bytes
[308,3] Reading 1 bytes
[308,4] Reading 1 bytes
[308,5] Reading 10 bytes
[308,6] Reading 1 bytes
[308,7] Reading 1 bytes
[308,8] Reading 1 bytes
[308,9] Reading 40 bytes
PM Read OK, Time taken 2.969s
Simlock backup OK
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm123_145_30005.600.mcusw (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID:        000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:                00000232
CMT_EM_ASIC_ID:                00000353
CMT_PUBLIC_ID:                14900214506D5150004C79747A14B353F45C8F96
CMT_ASIC_MODE_ID:        00
CMT_ROOT_KEY_HASH:        BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:                273F6D55DFAAF68F
rm123_145_30005.600.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220800000121, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 2F36DDC4990FD844712A61A80C033211BD9602E3
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x000006BF, NOR
EraseArea[0,CMT]: 0x000006C0-0x0000FFFF, NOR
EraseArea[0,CMT]: 0x00010000-0x0007FFFF, NOR
EraseArea[0,CMT]: 0x000A0000-0x0021FFFF, NOR
EraseArea[0,CMT]: 0x00220000-0x011DDFFF, NOR
EraseArea[0,CMT]: 0x011DE000-0x011DEFFF, NOR
EraseArea[0,CMT]: 0x011DF000-0x011DFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 50.297s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Writing CMT PMM_CONF Certificate...
Writing CMT SBIF_CONF Certificate...
Programming Status OK!
All blocks written OK! Time taken 568.453s
Restarting MCU...
Processing rm123_145_30005.600.mcusw (APE)...
Processing rm123_145_3005.60.ppm_g (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID:        000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:                00000232
CMT_EM_ASIC_ID:                00000353
CMT_PUBLIC_ID:                14900214506D5150004C79747A14B353F45C8F96
CMT_ASIC_MODE_ID:        00
CMT_ROOT_KEY_HASH:        BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:                273F6D55DFAAF68F
rm123_145_3005.60.ppm_g, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220800000121, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 2F36DDC4990FD844712A61A80C033211BD9602E3
Started group flash erase
EraseArea[0,CMT]: 0x011E0000-0x016DFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 11.860s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 138.344s
Restarting MCU...
Processing rm123_145_3005.60.ppm_g (APE)...
Processing rm123_145_30005.60.image_g (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID:        000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:                00000232
CMT_EM_ASIC_ID:                00000353
CMT_PUBLIC_ID:                14900214506D5150004C79747A14B353F45C8F96
CMT_ASIC_MODE_ID:        00
CMT_ROOT_KEY_HASH:        BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:                273F6D55DFAAF68F
rm123_145_30005.60.image_g, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220800000121, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 2F36DDC4990FD844712A61A80C033211BD9602E3
Started group flash erase
EraseArea[0,CMT]: 0x016E0000-0x01E7FFFF, NOR
EraseArea[0,CMT]: 0x01E80000-0x01FDFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 26.703s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 69.141s
Restarting MCU...
Processing rm123_145_30005.60.image_g (APE)...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version        V 05.60
MCU Date        14-09-07
Product                RM-145
Manufacturer        (c) Nokia
IMEI                354827021258155
IMEI Spare        3A45280712521805
IMEI SV                3345280712521805F8000000
PPM                V 05.60, 14-09-07, RM123_145_-, (c) Nokia, G
PSN                CBI272408
Product Code        0535955
Basic Product Code        0528588
PSD                0000001F00000000
RETU                32
TAHVO                53
AHNE                30
HW                2013
RFIC                17211721
DSP                pb05wk46v50
LCD                SEIKO
Simlock Server        SIMLOCK SERVER VERSION 63
Simlock Key        2440700000000000
Simlock Profile        0000000000000000
Simlock Key Cnt        0
Simlock FBUS Cnt        0
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!


hasnain 04-18-2009 14:35

6233 flashed ok
 
Code:

Backing up certificates...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101003000
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 121002055AA1015410EE082C588692BDF94CDD02
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 273F6D55DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001002F00000121, AMD, NOR
FlashContent[0,CMT]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo_fps8.fg, Type: Algorithm, Rev: 0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Box VPP disabled
Internal CMT Phone VPP Enabled
Warning: PAPUBKEYS Hash Missing!
APE Subsystem Not Found
CMT NPC Not Found
CMT HWC Not Found
CMT CCC Not Found
CMT R&D Not Found
CMT VARIANT Not Found
CMT PAPUBKEYS Not Found
CMT KEYS Not Found
Restarting MCU...
Read all certificates finished
Certificates backup thread finished, continuing...
Backing up simlock...
Simlock backup problem -> Phone not detected
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm123_145_30005.600.mcusw (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101003000
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 121002055AA1015410EE082C588692BDF94CDD02
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 273F6D55DFAAF68F
rm123_145_30005.600.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001002F00000121, AMD, NOR
FlashContent[0,CMT]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo_fps8.fg, Type: Algorithm, Rev: 0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
Warning: PAPUBKEYS Hash Missing!
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x000006BF, NOR
EraseArea[0,CMT]: 0x000006C0-0x0000FFFF, NOR
EraseArea[0,CMT]: 0x00010000-0x0007FFFF, NOR
EraseArea[0,CMT]: 0x000A0000-0x0021FFFF, NOR
EraseArea[0,CMT]: 0x00220000-0x011DDFFF, NOR
EraseArea[0,CMT]: 0x011DE000-0x011DEFFF, NOR
EraseArea[0,CMT]: 0x011DF000-0x011DFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 4.235s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
WARNING: CMT PAPUBKEYS Hash is Empty, writing first found PAPUBKEYS
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Writing CMT PMM_CONF Certificate...
Writing CMT SBIF_CONF Certificate...
Programming Status OK!
All blocks written OK! Time taken 127.891s
Restarting MCU...
Processing rm123_145_30005.600.mcusw (APE)...
Processing rm123_145_3005.60.ppm_g (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101003000
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 121002055AA1015410EE082C588692BDF94CDD02
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 273F6D55DFAAF68F
rm123_145_3005.60.ppm_g, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001002F00000121, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo_fps8.fg, Type: Algorithm, Rev: 0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 2F36DDC4990FD844712A61A80C033211BD9602E3
Started group flash erase
EraseArea[0,CMT]: 0x011E0000-0x016DFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 18.62s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 29.813s
Restarting MCU...
Processing rm123_145_3005.60.ppm_g (APE)...
Processing rm123_145_30005.60.image_g (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101003000
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 121002055AA1015410EE082C588692BDF94CDD02
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 273F6D55DFAAF68F
rm123_145_30005.60.image_g, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001002F00000121, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo_fps8.fg, Type: Algorithm, Rev: 0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 2F36DDC4990FD844712A61A80C033211BD9602E3
Started group flash erase
EraseArea[0,CMT]: 0x016E0000-0x01E7FFFF, NOR
EraseArea[0,CMT]: 0x01E80000-0x01FDFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 41.625s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 14.719s
Restarting MCU...
Processing rm123_145_30005.60.image_g (APE)...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version V 05.60
MCU Date 14-09-07
Product RM-145
Manufacturer (c) Nokia
IMEI ***********
IMEI Spare ***********
IMEI SV **********
PPM V 05.60, 14-09-07, RM123_145_-, (c) Nokia, G
PSN 2DI570061
Product Code 0532188
Module Code 0202772
Basic Product Code 0528588
PSD 0000001F00000000
RETU 32
TAHVO 53
AHNE 30
HW 1013
RFIC 17191719
DSP pb05wk46v50
LCD SEIKO
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 2440700000000000
Simlock Profile 8000000000000002
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished


oMeR_Rasheed 04-19-2009 08:01

Code:

Processing pre-flash tasks...
Pre-flash tasks finished
Booting UPP...
UPP ID: 2293 [HW_UNKNOWN]
rh112_003.000, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2268 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A23100340C605E40120A26514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2268 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 843FD326685233220A600E62FB
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: E35DFDC86BFA73A6C6D25079
Flashbus Write baud set to 6.50Mbits
5 Region(s) to erase
Erasing NOR Region [0x01000000-0x0100FFFF]
Erasing NOR Region [0x01010000-0x013AFFFF]
Erasing NOR Region [0x013B0000-0x013EFFFF]
Erasing NOR Region [0x017C0000-0x017EFFFF]
Erasing NOR Region [0x01FC0000-0x01FEFFFF]
Erase taken 24.47s
Writing 148 blocks...
All blocks written OK! Time taken 11.734s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 2293 [HW_UNKNOWN]
rh1120_nai03.00ia_demo, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2268 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A23100340C605E40120A26514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2268 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 843FD326685233220A600E62FB
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: E35DFDC86BFA73A6C6D25079
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01380000-0x013AFFFF]
Erase taken 1.110s
Writing 7 blocks...
All blocks written OK! Time taken 0.563s
Terminating flash session
Extracting Content Package...
CP Server: File Server fake reply for CUI phone.
CP Extract Failed -> CP Not Extracted, Code: 1
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 2293 [HW_UNKNOWN]
rh112_003.00ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2268 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A23100340C605E40120A26514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2268 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.02V
MSID-Crypted: 84289E4753E9011B33E029EB74
MSID-Plain: 3E4EBAE9000E3BE7A9000000
FAID-Crypted: 18F8A859FA81E2BDEF33691B
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x01240000-0x0124FFFF]
Erasing NOR Region [0x01250000-0x0137FFFF]
Erase taken 7.578s
Writing 69 blocks...
All blocks written OK! Time taken 5.516s
Terminating flash session
Box VPP disabled
Processing post-flash tasks...
Setting Factory Defaults...
Factory defaults OK
Post-flash tasks finished...
Flash successfully finished!
MCU Version V 03.00
MCU Date 14-11-08
Product  RH-112
Manufacturer (c) NMP
IMEI  351960030889638
Asic  11
HW Signature 7E827B90609245AD
Simlock Server SIMLOCK SERVER
Simlock Key 0000000000000000
Simlock Profile 0000000000030000
Simlock Aux 000B0000
Simlock IMEI 00003519600308896300
Simlock Key Cnt 15
Simlock FBUS Cnt 15
Selecting unlock method...
Search in: C:\Program Files\Cyclone Box\UnlockData\
Searching for: RH-112_V 03.00.unlock_img
Asking card to sign HW Signature...
Signed OK (C077670FF4E82605769B5DB6842ADD1BC13DC241)
Writing patch file...
Booting UPP...
UPP ID: 2293 [HW_UNKNOWN]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2268 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A23100340C605E40120A26514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2268 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 843FD326685233220A600E62FB
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: E35DFDC86BFA73A6C6D25079
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x01000000-0x0101FFFF]
Erasing NOR Region [0x01160000-0x0117FFFF]
Erase taken 1.594s
Writing 17 blocks...
All blocks written OK! Time taken 1.313s
Terminating flash session
Box VPP disabled
Writing SP...
Failed to Unlock DCT4 -> Possible cause: Signature Invalid (Phone not patched properly)

PHON FALSHED DONE BUTT FALSH PHON IS NOT UNLOCKED PLEASE CYCLONE TEAM CLEAR THIS FAULT PLEASE SO MANY PROBLEM WHIT THIS
I HAVE PHON 1202
B.R
SHERRY MOBILES

oMeR_Rasheed 04-19-2009 08:02

1202 faslh done butt not unlocked
 
Code:

Processing pre-flash tasks...
Pre-flash tasks finished
Booting UPP...
UPP ID: 2293 [HW_UNKNOWN]
rh112_003.000, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2268 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A23100340C605E40120A26514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2268 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 843FD326685233220A600E62FB
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: E35DFDC86BFA73A6C6D25079
Flashbus Write baud set to 6.50Mbits
5 Region(s) to erase
Erasing NOR Region [0x01000000-0x0100FFFF]
Erasing NOR Region [0x01010000-0x013AFFFF]
Erasing NOR Region [0x013B0000-0x013EFFFF]
Erasing NOR Region [0x017C0000-0x017EFFFF]
Erasing NOR Region [0x01FC0000-0x01FEFFFF]
Erase taken 24.47s
Writing 148 blocks...
All blocks written OK! Time taken 11.734s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 2293 [HW_UNKNOWN]
rh1120_nai03.00ia_demo, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2268 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A23100340C605E40120A26514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2268 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 843FD326685233220A600E62FB
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: E35DFDC86BFA73A6C6D25079
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01380000-0x013AFFFF]
Erase taken 1.110s
Writing 7 blocks...
All blocks written OK! Time taken 0.563s
Terminating flash session
Extracting Content Package...
CP Server: File Server fake reply for CUI phone.
CP Extract Failed -> CP Not Extracted, Code: 1
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 2293 [HW_UNKNOWN]
rh112_003.00ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2268 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A23100340C605E40120A26514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2268 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.02V
MSID-Crypted: 84289E4753E9011B33E029EB74
MSID-Plain: 3E4EBAE9000E3BE7A9000000
FAID-Crypted: 18F8A859FA81E2BDEF33691B
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x01240000-0x0124FFFF]
Erasing NOR Region [0x01250000-0x0137FFFF]
Erase taken 7.578s
Writing 69 blocks...
All blocks written OK! Time taken 5.516s
Terminating flash session
Box VPP disabled
Processing post-flash tasks...
Setting Factory Defaults...
Factory defaults OK
Post-flash tasks finished...
Flash successfully finished!
MCU Version V 03.00
MCU Date 14-11-08
Product RH-112
Manufacturer (c) NMP
IMEI 351960030889638
Asic 11
HW Signature 7E827B90609245AD
Simlock Server SIMLOCK SERVER
Simlock Key 0000000000000000
Simlock Profile 0000000000030000
Simlock Aux 000B0000
Simlock IMEI 00003519600308896300
Simlock Key Cnt 15
Simlock FBUS Cnt 15
Selecting unlock method...
Search in: C:\Program Files\Cyclone Box\UnlockData\
Searching for: RH-112_V 03.00.unlock_img
Asking card to sign HW Signature...
Signed OK (C077670FF4E82605769B5DB6842ADD1BC13DC241)
Writing patch file...
Booting UPP...
UPP ID: 2293 [HW_UNKNOWN]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2268 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A23100340C605E40120A26514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2268 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 843FD326685233220A600E62FB
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: E35DFDC86BFA73A6C6D25079
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x01000000-0x0101FFFF]
Erasing NOR Region [0x01160000-0x0117FFFF]
Erase taken 1.594s
Writing 17 blocks...
All blocks written OK! Time taken 1.313s
Terminating flash session
Box VPP disabled
Writing SP...
Failed to Unlock DCT4 -> Possible cause: Signature Invalid (Phone not patched properly)


PHON FALSHED DONE BUTT FALSH PHON IS NOT UNLOCKED PLEASE CYCLONE TEAM CLEAR THIS FAULT PLEASE SO MANY PROBLEM WHIT THIS
I HAVE PHON 1202 STOP ON CONTECT SERVICE
B.R
SHERRY MOBILES

hasnain 04-19-2009 16:15

2310 unlocked
 
Code:

MCU Version V 3.21
MCU Date 20-07-06
Product  RM-189
Manufacturer (c) NMP
IMEI  353653016203282
IMEI Spare 3A35560361022308
IMEI SV  3335560361022318F7000000
PPM  V 3.21, 20-07-06, RM-189, (c) NMP, AE
PSN  DFP228014
Product Code 0543033
Module Code 0203013
Basic Product Code 0531456
PSD  0000000D00000000
HW  0501
UEM  1314
UPP  8705
LCD  SEID:S31va1
ADSP Sw  p-V 3.21\n20-07-06\nRM-189\n(c) NMP\nN2310\nae
Asic  2
HW Signature 05F36C66ADBBDE2D
Simlock Server
Simlock Key 2343000000000000
Simlock Profile 8000000000010002
Simlock Aux 00020000
Simlock IMEI 00003536530162032800
Simlock Key Cnt 0
Simlock FBUS Cnt 0
MCU Version V 3.21
MCU Date 20-07-06
Product  RM-189
Manufacturer (c) NMP
IMEI  353653016203282
Asic  2
HW Signature 05F36C66ADBBDE2D
Simlock Server
Simlock Key 2343000000000000
Simlock Profile 8000000000010002
Simlock Aux 00020000
Simlock IMEI 00003536530162032800
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Selecting unlock method...
Search in: C:\Program Files\Cyclone Box\UnlockData\
Searching for: RM-189_V 3.21.unlock_img
Asking card to sign HW Signature...
Signed OK (C78ECEAE68543A247AEBBC6D0E64BD48814C8F1B)
Writing patch file...
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00208828 @ 0x01000000, ST, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_st_i.fia, Type: Algorithm, Target: FlashChip[0] 0x00208828 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.02V
MSID-Crypted: 8484DCC65AD1B83BB85E9F6F27
MSID-Plain: 3E4EBAE900192FC1A9000000
FAID-Crypted: 2C51CB3D8B9BFE634ABA3587
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01160000-0x0117FFFF]
Erase taken 1.281s
Writing 8 blocks...
All blocks written OK! Time taken 0.844s
Terminating flash session
Box VPP disabled
Writing SP...
New SP Accepted OK!
Writing restore file...
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00208828 @ 0x01000000, ST, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_st_i.fia, Type: Algorithm, Target: FlashChip[0] 0x00208828 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 8484DCC65AD1B83BB85E9F6F27
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: 2C51CB3D8B9BFE634ABA3587
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01160000-0x0117FFFF]
Erase taken 1.282s
Writing 8 blocks...
All blocks written OK! Time taken 0.828s
Terminating flash session
Box VPP disabled
Phone unlocked OK!
MCU Version V 3.21
MCU Date 20-07-06
Product  RM-189
Manufacturer (c) NMP
IMEI  353653016203282
IMEI Spare 3A35560361022308
IMEI SV  3335560361022318F7000000
PPM  V 3.21, 20-07-06, RM-189, (c) NMP, AE
PSN  DFP228014
Product Code 0543033
Module Code 0203013
Basic Product Code 0531456
PSD  0000000D00000000
HW  0501
UEM  1314
UPP  8705
RFIC  0500
DSP  P05w06.v34
LCD  SEID:S31va1
ADSP Sw  p-V 3.21\n20-07-06\nRM-189\n(c) NMP\nN2310\nae
Asic  2
HW Signature 05F36C66ADBBDE2D
Simlock Server
Simlock Key 0010100000000000
Simlock Profile 0000000000010002
Simlock Aux 00020000
Simlock IMEI 00003536530162032800
Simlock Key Cnt 0
Simlock FBUS Cnt 0


hasnain 04-19-2009 16:17

Quote:

Originally Posted by sherry_mobiles (Post 4369649)
Code:

Processing pre-flash tasks...
Pre-flash tasks finished
Booting UPP...
UPP ID: 2293 [HW_UNKNOWN]
rh112_003.000, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2268 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A23100340C605E40120A26514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2268 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 843FD326685233220A600E62FB
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: E35DFDC86BFA73A6C6D25079
Flashbus Write baud set to 6.50Mbits
5 Region(s) to erase
Erasing NOR Region [0x01000000-0x0100FFFF]
Erasing NOR Region [0x01010000-0x013AFFFF]
Erasing NOR Region [0x013B0000-0x013EFFFF]
Erasing NOR Region [0x017C0000-0x017EFFFF]
Erasing NOR Region [0x01FC0000-0x01FEFFFF]
Erase taken 24.47s
Writing 148 blocks...
All blocks written OK! Time taken 11.734s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 2293 [HW_UNKNOWN]
rh1120_nai03.00ia_demo, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2268 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A23100340C605E40120A26514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2268 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 843FD326685233220A600E62FB
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: E35DFDC86BFA73A6C6D25079
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01380000-0x013AFFFF]
Erase taken 1.110s
Writing 7 blocks...
All blocks written OK! Time taken 0.563s
Terminating flash session
Extracting Content Package...
CP Server: File Server fake reply for CUI phone.
CP Extract Failed -> CP Not Extracted, Code: 1
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 2293 [HW_UNKNOWN]
rh112_003.00ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2268 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A23100340C605E40120A26514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2268 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.02V
MSID-Crypted: 84289E4753E9011B33E029EB74
MSID-Plain: 3E4EBAE9000E3BE7A9000000
FAID-Crypted: 18F8A859FA81E2BDEF33691B
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x01240000-0x0124FFFF]
Erasing NOR Region [0x01250000-0x0137FFFF]
Erase taken 7.578s
Writing 69 blocks...
All blocks written OK! Time taken 5.516s
Terminating flash session
Box VPP disabled
Processing post-flash tasks...
Setting Factory Defaults...
Factory defaults OK
Post-flash tasks finished...
Flash successfully finished!
MCU Version V 03.00
MCU Date 14-11-08
Product RH-112
Manufacturer (c) NMP
IMEI 351960030889638
Asic 11
HW Signature 7E827B90609245AD
Simlock Server SIMLOCK SERVER
Simlock Key 0000000000000000
Simlock Profile 0000000000030000
Simlock Aux 000B0000
Simlock IMEI 00003519600308896300
Simlock Key Cnt 15
Simlock FBUS Cnt 15
Selecting unlock method...
Search in: C:\Program Files\Cyclone Box\UnlockData\
Searching for: RH-112_V 03.00.unlock_img
Asking card to sign HW Signature...
Signed OK (C077670FF4E82605769B5DB6842ADD1BC13DC241)
Writing patch file...
Booting UPP...
UPP ID: 2293 [HW_UNKNOWN]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2268 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A23100340C605E40120A26514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2268 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 843FD326685233220A600E62FB
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: E35DFDC86BFA73A6C6D25079
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x01000000-0x0101FFFF]
Erasing NOR Region [0x01160000-0x0117FFFF]
Erase taken 1.594s
Writing 17 blocks...
All blocks written OK! Time taken 1.313s
Terminating flash session
Box VPP disabled
Writing SP...
Failed to Unlock DCT4 -> Possible cause: Signature Invalid (Phone not patched properly)

PHON FALSHED DONE BUTT FALSH PHON IS NOT UNLOCKED PLEASE CYCLONE TEAM CLEAR THIS FAULT PLEASE SO MANY PROBLEM WHIT THIS
I HAVE PHON 1202 STOP ON CONTECT SERVICE
B.R
SHERRY MOBILES


just press power button here

Terminating flash session
Box VPP disabled

yasminato 04-20-2009 19:14

6234 revived by cyclone
 
Code:

Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x000006BF, NOR
EraseArea[0,CMT]: 0x000006C0-0x0000FFFF, NOR
EraseArea[0,CMT]: 0x00010000-0x0007FFFF, NOR
EraseArea[0,CMT]: 0x000A0000-0x0021FFFF, NOR
EraseArea[0,CMT]: 0x00220000-0x011DDFFF, NOR
EraseArea[0,CMT]: 0x011DE000-0x011DEFFF, NOR
EraseArea[0,CMT]: 0x011DF000-0x011DFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 52.625s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Writing CMT PMM_CONF Certificate...
Writing CMT SBIF_CONF Certificate...
Programming Status OK!
All blocks written OK! Time taken 510.219s
Restarting MCU...
Processing rm123_145_30005.430.mcusw (APE)...
Processing rm123_145_3005.43.ppm_g (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID:    000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:        00000232
CMT_EM_ASIC_ID:        00000353
CMT_PUBLIC_ID:        16C00013E5F50154A62796C314DD39ED8C3E2CAF
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:        273F6D55DFAAF68F
rm123_145_3005.43.ppm_g, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220800000121, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 2F36DDC4990FD844712A61A80C033211BD9602E3
Started group flash erase
EraseArea[0,CMT]: 0x011E0000-0x016DFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 12.515s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 126.875s
Restarting MCU...
Processing rm123_145_3005.43.ppm_g (APE)...
Processing rm123_145_30005.43.image_g (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID:    000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:        00000232
CMT_EM_ASIC_ID:        00000353
CMT_PUBLIC_ID:        16C00013E5F50154A62796C314DD39ED8C3E2CAF
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:        273F6D55DFAAF68F
rm123_145_30005.43.image_g, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220800000121, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 2F36DDC4990FD844712A61A80C033211BD9602E3
Started group flash erase
EraseArea[0,CMT]: 0x016E0000-0x01E7FFFF, NOR
EraseArea[0,CMT]: 0x01E80000-0x01FDFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 27.938s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 63.235s
Restarting MCU...
Processing rm123_145_30005.43.image_g (APE)...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Post flash tasks finished!
Flashing successfully finished!


Jr Telecom 04-20-2009 23:29

Direct unlock 2680s(rm-392) with Cyclone!
http://i244.photobucket.com/albums/g...g?t=1240266497

Amir-SkillZ 04-21-2009 06:37

6500C dead USB flashed OK

Code:

Selecting USB Flashing Method...
[BB5 ADL Server]: Found 0 active devices
[BB5 ADL Server]: Not Found!
[BB5 NMWCD]: Found 1 active devices
[Nokia USB Flashing Generic]: Opening Connection
[Nokia USB Flashing Generic]: Port opened OK!
Proceeding with Dead USB Mode
Press power-on shortly to run USB Boot ROM
[BB5 BootRom]: Found 1 active devices
[Nokia USB Flashing Generic]: Opening Connection
[Nokia USB Flashing Generic]: Port opened OK!
CMT_SYSTEM_ASIC_ID:        000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:                00000295
CMT_EM_ASIC_ID:                00000B22
CMT_PUBLIC_ID:                1340010F0D8357508335490F91B31C26D7A5894C
CMT_ASIC_MODE_ID:        00
CMT_ROOT_KEY_HASH:        BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:                273F6D55DFAAF68F
DeadUSB.raw, Type: 2nd Boot Loader, Rev: , Algo: BB5
Sending RAW Loader...
Sending CMT UPDAPP Certificate and Data...
Waiting for ADL Server Startup...
[BB5 ADL Server]: Found 1 active devices
[Nokia BB5 ADL Loader USB Generic]: Opening Connection
[Nokia BB5 ADL Loader USB Generic]: Port opened OK!
ADL Server Startup Confirmed OK!
Processing rm265__08.30.mcusw (CMT)...
rm265__08.30.mcusw, Type: Flash Image, Algo: BB5, XSR 1.5
Started flash erase
EraseArea[0,CMT]: 0x00000000-0x0001FFFF, NOR
EraseArea[0,CMT]: 0x00040000-0x000BFFFF, NOR
EraseArea[0,CMT]: 0x000C0000-0x0013FFFF, NOR
EraseArea[0,CMT]: 0x013C0000-0x0153FFFF, NOR
EraseArea[0,CMT]: 0x00140000-0x013BFFFF, NOR
Erase taken 40.0s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
WARNING: CMT PAPUBKEYS Hash is Empty, writing first found PAPUBKEYS
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 118.422s
Processing rm265__08.30.ppm_a (CMT)...
rm265__08.30.ppm_a, Type: Flash Image, Algo: BB5, XSR 1.5
Started flash erase
EraseArea[0,CMT]: 0x01540000-0x01BBFFFF, NOR
Erase taken 17.156s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 34.906s
Processing rm265__08.30_ism_001.image_a_pink_3_dk_pink_v2 (CMT)...
rm265__08.30_ism_001.image_a_pink_3_dk_pink_v2, Type: Flash Image, Algo: BB5, XSR 1.5
Started flash erase
EraseArea[0,CMT]: 0x01EC0000-0x03F9FFFF, NOR
EraseArea[0,CMT]: 0x01BC0000-0x01EBFFFF, NOR
Erase taken 115.125s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 73.469s
Restarting CMT...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
Factory defaults OK
Reading info...
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
Failed to read info -> Phone not detected
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!


oMeR_Rasheed 04-21-2009 07:17

n73 FLASHED WHIT CYCLONE BOX
 
Code:

Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.6634
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v1.01, (Apr 18 2009 02:44:06, gcc-4.2.2, RTOS V5.1.0), Type: Signed Production Application
Box Serial Number: C0000156
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk32
Initializing security card...
Card Serial Number: D10000AC
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 5.10v PASSED
MCU Voltage 3.29v PASSED
Core Voltage 1.83v PASSED
VBAT Voltage 0.06v PASSED
VBAT Voltage 4.81v PASSED
Box VPP disabled
VPP Voltage 0.02v PASSED
Internal Box VPP Enabled
VPP Voltage 5.01v PASSED
Box VPP disabled
VPP Voltage 0.02v PASSED
External Box VPP Enabled
VPP Voltage 0.00v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Initializing FBUS...
All initialized - Ready to work
Processing pre flash tasks...
Backing up certificates...
Booting RAP...
APE_SYSTEM_ASIC_ID:  17100708
APE_ASIC_MODE_ID:  00
APE_PUBLIC_ID:  4427DCB19E7F271932DC0A5CD9C2A1B3E7E6C0DE
APE_ROOT_KEY_HASH:  49A97E826B93BA20B7ED0B082475C00500000000
APE_ROM_ID:  1DFD66132C872FD4
CMT_SYSTEM_ASIC_ID:  000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  0CF00106A50450507EDF69BFF365CA855395A311
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:  273F6D55DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC00A100800015, Samsung, NAND
FlashContent[0,APE]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NAND
h3_sam_nand_format.fg, Type: Algorithm, Rev: 0.1.16.255, Algo: OMAP1610 FORMAT ALG
Box VPP disabled
Internal APE Phone VPP Enabled
Failed to Read All Certificates -> Failed to get APE PAPUB Hash
Certificates backup thread finished, continuing...
Backing up simlock...
Starting PM read in range 308-308...
[308] Reading 9 records
[308,0] Reading 1 bytes
[308,1] Reading 8192 bytes
[308,3] Reading 1 bytes
[308,4] Reading 1 bytes
[308,5] Reading 10 bytes
[308,6] Reading 1 bytes
[308,7] Reading 1 bytes
[308,8] Reading 1 bytes
[308,9] Reading 40 bytes
PM Read OK, Time taken 1.984s
Simlock backup OK
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing N73_4.0736.3.2.1_western_C00_PRD_cc.fpsx (CMT)...
Booting RAP...
APE_SYSTEM_ASIC_ID:  17100708
APE_ASIC_MODE_ID:  00
APE_PUBLIC_ID:  4427DCB19E7F271932DC0A5CD9C2A1B3E7E6C0DE
APE_ROOT_KEY_HASH:  49A97E826B93BA20B7ED0B082475C00500000000
APE_ROM_ID:  1DFD66132C872FD4
CMT_SYSTEM_ASIC_ID:  000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  0CF00106A50450507EDF69BFF365CA855395A311
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:  273F6D55DFAAF68F
N73_4.0736.3.2.1_western_C00_PRD_cc.fpsx, Type: Flash Image, Algo: BB5, BB5 ALGORITHM, BB5, OMAP1710 UNISTORE-II-1.2.1  ALG
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00080000-0x007314D1, NOR
EraseArea[0,CMT]: 0x00000000-0x0005FFFF, NOR
EraseArea[0,CMT]: 0x001E0000-0x001FFFFF, NOR
EraseArea[0,CMT]: 0x00880000-0x00FEFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 44.640s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT ADL Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 42.594s
Restarting MCU...
Processing N73_4.0736.3.2.1_western_C00_PRD_cc.fpsx (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID:  17100708
APE_ASIC_MODE_ID:  00
APE_PUBLIC_ID:  4427DCB19E7F271932DC0A5CD9C2A1B3E7E6C0DE
APE_ROOT_KEY_HASH:  49A97E826B93BA20B7ED0B082475C00500000000
APE_ROM_ID:  1DFD66132C872FD4
CMT_SYSTEM_ASIC_ID:  000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  0CF00106A50450507EDF69BFF365CA855395A311
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:  273F6D55DFAAF68F
N73_4.0736.3.2.1_western_C00_PRD_cc.fpsx, Type: Flash Image, Algo: BB5, BB5 ALGORITHM, BB5, OMAP1710 UNISTORE-II-1.2.1  ALG
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC00A100800015, Samsung, NAND
FlashContent[0,APE]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NAND
h3_sam_nand_xsr.fg, Type: Algorithm, Rev: 0.1.49.0, Algo: OMAP1710 UNISTORE-II-1.2.1  ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x00000000-0x0007FFFF, NAND
EraseArea[0,APE]: 0x00080000-0x000FFFFF, NAND
EraseArea[0,APE]: 0x00100000-0x0025FFFF, NAND
EraseArea[0,APE]: 0x003C0000-0x04E1FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 1.78s
Writing all blocks...
Writing APE KEYS Certificate...
Writing APE X-LOADER Certificate...
Writing APE PRIMAPP Certificate...
Writing APE SOS+LOADER Certificate...
Writing APE SOS*UPDAPP Certificate...
Writing APE SOS+UZIP Certificate...
Writing APE PAPUBKEYS Certificate...
Writing APE PASUBTOC Certificate...
Writing APE ADL Certificate...
Writing APE SOS+XZIP Certificate...
Writing APE SOS*CORE Certificate...
Programming Status OK!
All blocks written OK! Time taken 63.985s
Restarting MCU...
Processing N73_rofx_4.0736.3.2.1_PRD.V01 (CMT)...
Processing N73_rofx_4.0736.3.2.1_PRD.V01 (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID:  17100708
APE_ASIC_MODE_ID:  00
APE_PUBLIC_ID:  4427DCB19E7F271932DC0A5CD9C2A1B3E7E6C0DE
APE_ROOT_KEY_HASH:  49A97E826B93BA20B7ED0B082475C00500000000
APE_ROM_ID:  1DFD66132C872FD4
CMT_SYSTEM_ASIC_ID:  000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  0CF00106A50450507EDF69BFF365CA855395A311
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:  273F6D55DFAAF68F
N73_rofx_4.0736.3.2.1_PRD.V01, Type: Flash Image, Algo: BB5, OMAP1710 UNISTORE-II-1.2.1  ALG, BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 100Kbits
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC00A100800015, Samsung, NAND
FlashContent[0,APE]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NAND
h3_sam_nand_xsr.fg, Type: Algorithm, Rev: 0.1.49.0, Algo: OMAP1710 UNISTORE-II-1.2.1  ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x03920000-0x04E1FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 0.297s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 39.110s
Restarting MCU...
Processing N73_userarea_4.0736.3.2.1.U01 (CMT)...
Processing N73_userarea_4.0736.3.2.1.U01 (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID:  17100708
APE_ASIC_MODE_ID:  00
APE_PUBLIC_ID:  4427DCB19E7F271932DC0A5CD9C2A1B3E7E6C0DE
APE_ROOT_KEY_HASH:  49A97E826B93BA20B7ED0B082475C00500000000
APE_ROM_ID:  1DFD66132C872FD4
CMT_SYSTEM_ASIC_ID:  000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  0CF00106A50450507EDF69BFF365CA855395A311
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:  273F6D55DFAAF68F
N73_userarea_4.0736.3.2.1.U01, Type: Flash Image, Algo: BB5, OMAP1710 UNISTORE-II-1.2.1  ALG, BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 100Kbits
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC00A100800015, Samsung, NAND
FlashContent[0,APE]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NAND
h3_sam_nand_xsr.fg, Type: Algorithm, Rev: 0.1.49.0, Algo: OMAP1710 UNISTORE-II-1.2.1  ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
Started group flash erase
EraseArea[0,APE]: 0x04E20000-0x07C9FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 0.656s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 18.969s
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version V 05wk47v51.5
MCU Date 29-08-07
Product  RM-133
Manufacturer (c) Nokia. 
IMEI  353548023339311
IMEI Spare 3A35450832333901
IMEI SV  3335450832333951F3000000
PSN  CDF028978
Product Code 0537289
Module Code 0202855
Basic Product Code 0537044
PSD  0000002200000000
Failed to read info -> Failed to read extended info
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!

AND BRO HUSNAIN I AM TRYING WHIT THIS BUTT NO SUCSESS

B.R
SHERRY MOBILES

Amir-SkillZ 04-21-2009 07:41

Do hide ur BoX s/n next time when u post LOG

..::Mobile Smoker::.. 04-21-2009 15:05

Nokia 8600(Luna) Successfully Flashed With Cyclone
 
here is the Log

Code:

Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.6634
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v1.00, (Mar 13 2009 20:30:35, gcc-4.2.2, RTOS V5.1.0), Type: Signed Production Application
Box Serial Number: C00000DE
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk32
Initializing security card...
Card Serial Number: D0000***
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage        5.12v        PASSED
MCU Voltage        3.28v        PASSED
Core Voltage        1.78v        PASSED
VBAT Voltage        0.45v        PASSED
VBAT Voltage        4.81v        PASSED
Box VPP disabled
VPP Voltage        0.00v        PASSED
Internal Box VPP Enabled
VPP Voltage        4.95v        PASSED
Box VPP disabled
VPP Voltage        0.04v        PASSED
External Box VPP Enabled
VPP Voltage        0.04v        FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Initializing FBUS...
All initialized - Ready to work
Processing pre flash tasks...
Backing up certificates...
Booting RAP...
CMT_SYSTEM_ASIC_ID:        000000010000022600010006010C192101001101
CMT_EM_ASIC_ID:                00000232
CMT_EM_ASIC_ID:                00000353
CMT_PUBLIC_ID:                2BA0010ADCCA6C566D20A2477760DAB595E7171F
CMT_ASIC_MODE_ID:        00
CMT_ROOT_KEY_HASH:        BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:                191EC665DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220800008D21, Samsung, NOR
FlashChip[0,CMT]: 0x00EC003000000121, Samsung, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: A4182F8DC2FFE3137CF7C7CC0BB90D0B7151AF4A
APE Subsystem Not Found
CMT NPC Ok
CMT HWC Not Found
CMT CCC Not Found
CMT R&D Ok
CMT VARIANT Ok
CMT PAPUBKEYS Ok
CMT KEYS Ok
Restarting MCU...
Read all certificates finished
Certificates backup thread finished, continuing...
Backing up simlock...
Starting PM read in range 308-308...
[308] Reading 9 records
[308,0] Reading 1 bytes
[308,1] Reading 8192 bytes
[308,3] Reading 1 bytes
[308,4] Reading 1 bytes
[308,5] Reading 10 bytes
[308,6] Reading 1 bytes
[308,7] Reading 1 bytes
[308,8] Reading 1 bytes
[308,9] Reading 40 bytes
PM Read OK, Time taken 1.985s
Simlock backup OK
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm164__04.00.mcusw (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID:        000000010000022600010006010C192101001101
CMT_EM_ASIC_ID:                00000232
CMT_EM_ASIC_ID:                00000353
CMT_PUBLIC_ID:                2BA0010ADCCA6C566D20A2477760DAB595E7171F
CMT_ASIC_MODE_ID:        00
CMT_ROOT_KEY_HASH:        BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:                191EC665DFAAF68F
rm164__04.00.mcusw, Type: Flash Image, Algo: BB5, XSR 1.5
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 3.25Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220800008D21, Samsung, NOR
FlashChip[0,CMT]: 0x00EC003000000121, Samsung, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo_xsr15.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: A4182F8DC2FFE3137CF7C7CC0BB90D0B7151AF4A
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x000006BF, NOR
EraseArea[0,CMT]: 0x000006C0-0x000BFFFF, NOR
EraseArea[0,CMT]: 0x000C0000-0x000D7FFF, NOR
EraseArea[0,CMT]: 0x000D8000-0x000DFFFF, NOR
EraseArea[0,CMT]: 0x00100000-0x001FFFFF, NOR
EraseArea[0,CMT]: 0x00200000-0x002DFFFF, NOR
EraseArea[0,CMT]: 0x002E0000-0x00EFFFFF, NOR
EraseArea[0,CMT]: 0x01500000-0x0157FFFF, NOR
EraseArea[0,CMT]: 0x01580000-0x015FFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 36.313s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Writing CMT PMM_CONF Certificate...
Writing CMT SBIF_CONF Certificate...
Programming Status OK!
All blocks written OK! Time taken 378.484s
Restarting MCU...
Processing rm164__04.00.mcusw (APE)...
Processing rm164__04.00.ppm_i (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID:        000000010000022600010006010C192101001101
CMT_EM_ASIC_ID:                00000232
CMT_EM_ASIC_ID:                00000353
CMT_PUBLIC_ID:                2BA0010ADCCA6C566D20A2477760DAB595E7171F
CMT_ASIC_MODE_ID:        00
CMT_ROOT_KEY_HASH:        BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:                191EC665DFAAF68F
rm164__04.00.ppm_i, Type: Flash Image, Algo: BB5, XSR 1.5
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 3.25Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220800008D21, Samsung, NOR
FlashChip[0,CMT]: 0x00EC003000000121, Samsung, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo_xsr15.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: A4182F8DC2FFE3137CF7C7CC0BB90D0B7151AF4A
Started group flash erase
EraseArea[0,CMT]: 0x00F00000-0x014FFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 13.360s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 143.172s
Restarting MCU...
Processing rm164__04.00.ppm_i (APE)...
Processing rm164__04.00.image_ctv_ru (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID:        000000010000022600010006010C192101001101
CMT_EM_ASIC_ID:                00000232
CMT_EM_ASIC_ID:                00000353
CMT_PUBLIC_ID:                2BA0010ADCCA6C566D20A2477760DAB595E7171F
CMT_ASIC_MODE_ID:        00
CMT_ROOT_KEY_HASH:        BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:                191EC665DFAAF68F
rm164__04.00.image_ctv_ru, Type: Flash Image, Algo: BB5, XSR 1.5
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 3.25Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220800008D21, Samsung, NOR
FlashChip[0,CMT]: 0x00EC003000000121, Samsung, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo_xsr15.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: A4182F8DC2FFE3137CF7C7CC0BB90D0B7151AF4A
Partitioning...
Partitioning OK
Started group flash erase
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 2.437s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 16.719s
Restarting MCU...
Processing rm164__04.00.image_ctv_ru (APE)...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version        V 04.00
MCU Date        06-09-07
Product                RM-164
Manufacturer        (c) Nokia.         
IMEI                356287011*****
IMEI Spare        3A65820711921908
IMEI SV                3365820711921908F7000000
PPM                V 04.00, 06-09-07, RM-164, (c) Nokia.          , I
CNT                Content: ctv_ru, V 04.00, 06-09-07, RM-164, (c) Nokia.          ,
PSN                MYG740766
Product Code        0546145
Module Code        0203066
Basic Product Code        0532835
PSD                0000001D00000000
RETU                32
TAHVO                53
AHNE                11
HW                4000
RFIC                17211721
DSP                rm164_dsprap_pb05wk46v31_02
Simlock Server        SIMLOCK SERVER VERSION 63
Simlock Key        2440700000000000
Simlock Profile        8000000000000000
Simlock Key Cnt        0
Simlock FBUS Cnt        0
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!


hasnain 04-22-2009 13:31

1200 imei repaired
 
Programming data for IMEI: 353526022279191
Found FLASH Data Rebuild Block
Found UEM Data Rebuild Block
Booting UPP...
UPP ID: 2292 [HW_UNKNOWN]
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
PLL Factor: 3
FlashChip[0]: 0x00EC2268 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 0Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2268 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.00V
Programming FLASH data...
FLASH data Programmed OK
Programming UEM data...
UEM data Programmed OK
Terminating flash session
Write UEM finished


MCU Version V 5.23
MCU Date 10-03-08
Product RH-99
Manufacturer (c) NMP
IMEI 353526022279191
Asic 11
HW Signature 5B4D82FCAFDB815E
Simlock Server SIMLOCK SERVER
Simlock Key 0010100000000000
Simlock Profile 0000000000010002
Simlock Aux 000B0000
Simlock IMEI 00003535260222791900
Simlock Key Cnt 0
Simlock FBUS Cnt 0

megatech10 04-24-2009 02:15

40 pcs. 1680C-2 v6.82 unlock by cyclonebox
 
http://i242.photobucket.com/albums/f...cyclonebox.jpg

http://i242.photobucket.com/albums/f...3042009057.jpg

UnlockingLab 04-24-2009 20:35

5310 Flashing successfully
 
Code:


Processing pre flash tasks...
Backing up certificates...
Booting RAP...
Failed to Read All Certificates -> RAP Not Responding
Certificates backup thread finished, continuing...
Backing up simlock...
Simlock backup problem -> Phone not detected
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm303__09.42.mcusw (CMT)...
Booting RAP...
Processing Flash Image Failed -> RAP Not Responding
Failed to Process all Image files -> Failed to process rm303__09.42.mcusw
Processing pre flash tasks...
Backing up certificates...
Booting RAP...
CMT_SYSTEM_ASIC_ID:  000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  17B0020D0A280354C5134BF7944D56E3BEED1FBF
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:  273F6D55DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 3E96DE4212587183E5E16BB2C79692A53C19875D
APE Subsystem Not Found
CMT NPC Ok
CMT HWC Ok
CMT CCC Ok
CMT R&D Ok
CMT VARIANT Not Found
CMT PAPUBKEYS Ok
CMT KEYS Ok
Restarting MCU...
Read all certificates finished
Certificates backup thread finished, continuing...
Backing up simlock...
Simlock backup problem -> Phone not detected
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm303__09.42.mcusw (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID:  000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  17B0020D0A280354C5134BF7944D56E3BEED1FBF
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:  273F6D55DFAAF68F
rm303__09.42.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 3.25Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 3E96DE4212587183E5E16BB2C79692A53C19875D
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x000006BF, NOR
EraseArea[0,CMT]: 0x000006C0-0x0001FFFF, NOR
EraseArea[0,CMT]: 0x00040000-0x000BFFFF, NOR
EraseArea[0,CMT]: 0x000C0000-0x0013FFFF, NOR
EraseArea[0,CMT]: 0x00140000-0x010DFFFF, NOR
EraseArea[0,CMT]: 0x010E0000-0x0121FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 6.610s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 562.828s
Restarting MCU...
Processing rm303__09.42.mcusw (APE)...
Processing rm303__09.42.ppm_c (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID:  000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  17B0020D0A280354C5134BF7944D56E3BEED1FBF
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:  273F6D55DFAAF68F
rm303__09.42.ppm_c, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 3.25Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 3E96DE4212587183E5E16BB2C79692A53C19875D
Started group flash erase
EraseArea[0,CMT]: 0x01220000-0x0189FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 18.234s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 211.375s
Restarting MCU...
Processing rm303__09.42.ppm_c (APE)...
Processing rm303__09.42.image_c_uk_red (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID:  000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  17B0020D0A280354C5134BF7944D56E3BEED1FBF
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:  273F6D55DFAAF68F
rm303__09.42.image_c_uk_red, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 3.25Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 3E96DE4212587183E5E16BB2C79692A53C19875D
Started group flash erase
EraseArea[0,CMT]: 0x018A0000-0x01B1FFFF, NOR
EraseArea[0,CMT]: 0x01B20000-0x03FBFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 112.860s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 279.453s
Restarting MCU...
Processing rm303__09.42.image_c_uk_red (APE)...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version V 09.42
MCU Date 07-11-08
Product  RM-303
Manufacturer (c) Nokia           
IMEI  356817026669066
IMEI Spare 3A65180762660906
IMEI SV  3365180762660966F1000000
PPM  V 09.42, 07-11-08, RM-303, (c) Nokia            , C
CNT  Content: c_uk_red, V 09.42, 07-11-08, RM-303, (c) Nokia            ,
PSN  KIR936064
Product Code 0556508
Module Code 0203414
Basic Product Code 0544850
PSD  0000000000000000
LPSN  0
RETU  15
TAHVO  22
AHNE  30
HW  2013
RFIC  064c0609
DSP  ICPR71_08w30
LCD  SEIKO
BT  2222-143
ADSP Sw  2222-143
Simlock Server SIMLOCK SERVER
Simlock Key 2341000000000000
Simlock Profile 8000000000000006
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!


UnlockingLab 04-24-2009 20:37

n73 Flashing successfully
 
Code:


Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.6634
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v1.01, (Apr 18 2009 02:44:06, gcc-4.2.2, RTOS V5.1.0), Type: Signed Production Application
Box Serial Number: C00000B0
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk32
Initializing security card...
Card Serial Number: D100012C
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 5.03v PASSED
MCU Voltage 3.28v PASSED
Core Voltage 1.78v PASSED
VBAT Voltage 0.10v PASSED
VBAT Voltage 4.82v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
Internal Box VPP Enabled
VPP Voltage 4.95v PASSED
Box VPP disabled
VPP Voltage 0.02v PASSED
External Box VPP Enabled
VPP Voltage 0.00v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Initializing FBUS...
All initialized - Ready to work
Processing pre flash tasks...
Backing up certificates...
Booting RAP...
APE_SYSTEM_ASIC_ID:  17100708
APE_ASIC_MODE_ID:  00
APE_PUBLIC_ID:  F307DDE8DB3814057B2B1CAC37BC1BFC05861727
APE_ROOT_KEY_HASH:  49A97E826B93BA20B7ED0B082475C00500000000
APE_ROM_ID:  1DFD66132C872FD4
CMT_SYSTEM_ASIC_ID:  000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  23500212CDE60154B093661A1F1B2ACFA0F212E0
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:  273F6D55DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC00A100800015, Samsung, NAND
FlashContent[0,APE]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NAND
h3_sam_nand_format.fg, Type: Algorithm, Rev: 0.1.16.255, Algo: OMAP1610 FORMAT ALG
Box VPP disabled
Internal APE Phone VPP Enabled
Failed to Read All Certificates -> Failed to get APE PAPUB Hash
Certificates backup thread finished, continuing...
Backing up simlock...
Simlock backup problem -> Phone not detected
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing N73_4.0812.4.2.1_western_C00_PRD_cc.fpsx (CMT)...
Booting RAP...
APE_SYSTEM_ASIC_ID:  17100708
APE_ASIC_MODE_ID:  00
APE_PUBLIC_ID:  F307DDE8DB3814057B2B1CAC37BC1BFC05861727
APE_ROOT_KEY_HASH:  49A97E826B93BA20B7ED0B082475C00500000000
APE_ROM_ID:  1DFD66132C872FD4
CMT_SYSTEM_ASIC_ID:  000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  23500212CDE60154B093661A1F1B2ACFA0F212E0
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:  273F6D55DFAAF68F
N73_4.0812.4.2.1_western_C00_PRD_cc.fpsx, Type: Flash Image, Algo: BB5, BB5 ALGORITHM, BB5, OMAP1710 UNISTORE-II-1.2.1  ALG
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00080000-0x00731951, NOR
EraseArea[0,CMT]: 0x00000000-0x0005FFFF, NOR
EraseArea[0,CMT]: 0x001E0000-0x001FFFFF, NOR
EraseArea[0,CMT]: 0x00880000-0x00FEFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 13.906s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT ADL Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 38.593s
Restarting MCU...
Processing N73_4.0812.4.2.1_western_C00_PRD_cc.fpsx (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID:  17100708
APE_ASIC_MODE_ID:  00
APE_PUBLIC_ID:  F307DDE8DB3814057B2B1CAC37BC1BFC05861727
APE_ROOT_KEY_HASH:  49A97E826B93BA20B7ED0B082475C00500000000
APE_ROM_ID:  1DFD66132C872FD4
CMT_SYSTEM_ASIC_ID:  000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  23500212CDE60154B093661A1F1B2ACFA0F212E0
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:  273F6D55DFAAF68F
N73_4.0812.4.2.1_western_C00_PRD_cc.fpsx, Type: Flash Image, Algo: BB5, BB5 ALGORITHM, BB5, OMAP1710 UNISTORE-II-1.2.1  ALG
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC00A100800015, Samsung, NAND
FlashContent[0,APE]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NAND
h3_sam_nand_xsr.fg, Type: Algorithm, Rev: 0.1.49.0, Algo: OMAP1710 UNISTORE-II-1.2.1  ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x00000000-0x0007FFFF, NAND
EraseArea[0,APE]: 0x00080000-0x000FFFFF, NAND
EraseArea[0,APE]: 0x00100000-0x0025FFFF, NAND
EraseArea[0,APE]: 0x003C0000-0x04E1FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 1.140s
Writing all blocks...
Writing APE KEYS Certificate...
Writing APE X-LOADER Certificate...
Writing APE PRIMAPP Certificate...
Writing APE SOS+LOADER Certificate...
Writing APE SOS*UPDAPP Certificate...
Writing APE SOS+UZIP Certificate...
Writing APE PAPUBKEYS Certificate...
Writing APE PASUBTOC Certificate...
Writing APE ADL Certificate...
Writing APE SOS+XZIP Certificate...
Writing APE SOS*CORE Certificate...
Writing APE SOS+ROFS Certificate...
Writing APE SOS+ROFX Certificate...
Programming Status OK!
All blocks written OK! Time taken 62.625s
Restarting MCU...
Processing N73_rofx_4.0812.4.2.1_PRD.V05 (CMT)...
Processing N73_rofx_4.0812.4.2.1_PRD.V05 (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID:  17100708
APE_ASIC_MODE_ID:  00
APE_PUBLIC_ID:  F307DDE8DB3814057B2B1CAC37BC1BFC05861727
APE_ROOT_KEY_HASH:  49A97E826B93BA20B7ED0B082475C00500000000
APE_ROM_ID:  1DFD66132C872FD4
CMT_SYSTEM_ASIC_ID:  000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  23500212CDE60154B093661A1F1B2ACFA0F212E0
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:  273F6D55DFAAF68F
N73_rofx_4.0812.4.2.1_PRD.V05, Type: Flash Image, Algo: BB5, OMAP1710 UNISTORE-II-1.2.1  ALG, BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 100Kbits
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC00A100800015, Samsung, NAND
FlashContent[0,APE]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NAND
h3_sam_nand_xsr.fg, Type: Algorithm, Rev: 0.1.49.0, Algo: OMAP1710 UNISTORE-II-1.2.1  ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x03920000-0x04E1FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 0.312s
Writing all blocks...
Writing APE SOS+ROFX Certificate...
Programming Status OK!
All blocks written OK! Time taken 31.31s
Restarting MCU...
Processing N73_userarea_4.0812.4.2.1.U02 (CMT)...
Processing N73_userarea_4.0812.4.2.1.U02 (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID:  17100708
APE_ASIC_MODE_ID:  00
APE_PUBLIC_ID:  F307DDE8DB3814057B2B1CAC37BC1BFC05861727
APE_ROOT_KEY_HASH:  49A97E826B93BA20B7ED0B082475C00500000000
APE_ROM_ID:  1DFD66132C872FD4
CMT_SYSTEM_ASIC_ID:  000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  23500212CDE60154B093661A1F1B2ACFA0F212E0
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:  273F6D55DFAAF68F
N73_userarea_4.0812.4.2.1.U02, Type: Flash Image, Algo: BB5, OMAP1710 UNISTORE-II-1.2.1  ALG, BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 100Kbits
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC00A100800015, Samsung, NAND
FlashContent[0,APE]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NAND
h3_sam_nand_xsr.fg, Type: Algorithm, Rev: 0.1.49.0, Algo: OMAP1710 UNISTORE-II-1.2.1  ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
Started group flash erase
EraseArea[0,APE]: 0x04E20000-0x07C9FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 0.672s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 10.656s
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version V 05wk47v60.1
MCU Date 20-03-08
Product  RM-133
Manufacturer (c) Nokia. 
IMEI  357652013243040
IMEI Spare 3A75560231420304
IMEI SV  3375560231420374F5000000
PSN  SBJ544214
Product Code 0537289
Module Code 0202855
Basic Product Code 0537044
PSD  0000002200000000
LPSN  "
RETU  15
TAHVO  22
AHNE  30
HW  7100
RFIC  17211721
DSP  scarfe_mc.05wk46v50p2
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!


digiphone 05-02-2009 17:29

Nokia 5310 RM-303 .
unlocked with Cyclone .

Code:


All box selftests passed!
Initializing FBUS...
All initialized - Ready to work
MCU Version V 07.01
MCU Date 23-05-08
Product  RM-303
Manufacturer (c) Nokia           
IMEI  35204********
Mastercode 41306601
IMEI Spare 3A25400452286605
IMEI SV  3325400452286645F6000000
PPM  V 07.01, 23-05-08, RM-303, (c) Nokia            , C
CNT  Content: c_blue, V 07.01, 23-05-08, RM-303, (c) Nokia            ,
PSN  KJP377967
Product Code 0547371
Module Code 0203414
Basic Product Code 0544850
PSD  0000000000000000
LPSN  0
RETU  15
TAHVO  22
AHNE  30
HW  2002
RFIC  064c0609
DSP  ICPR71_08w10
LCD  SEIKO
BT  2222-143
BB5 Unlock Started...
MCU Version V 07.01
MCU Date 23-05-08
Product  RM-303
Manufacturer (c) Nokia           
IMEI  35204********
Mastercode 41306601
Warning: Failed to read SP Info, Assuming defaults
Simlock Server SIMLOCK SERVER
Simlock Key 0000000000000000
Simlock Profile
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
CMT_SYSTEM_ASIC_ID:  000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  2B600106E36D0254D5E64CF406655D1CFD202EE3
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:  273F6D55DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 3E96DE4212587183E5E16BB2C79692A53C19875D
APE Boot skipped on user request
Restarting MCU...
Determined PA Simlock: PA_SL2
Checking for Rootkey Hash support...
Restarting MCU...
Booting RAP...
CMT_SYSTEM_ASIC_ID:  000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  2B600106E36D0254D5E64CF406655D1CFD202EE3
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:  273F6D55DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
Received Security Block OK !
Bypassing SX4...
Booting RAP...
CMT_SYSTEM_ASIC_ID:  000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  2B600106E36D0254D5E64CF406655D1CFD202EE3
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:  273F6D55DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 3E96DE4212587183E5E16BB2C79692A53C19875D
APE Boot skipped on user request
CMT NPC Ok
CMT NPC Erased
Restarting MCU...
Writing Security Block...
Writing Simlock Key...
SP Accepted, doing reset to update block...
Booting RAP...
CMT_SYSTEM_ASIC_ID:  000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  2B600106E36D0254D5E64CF406655D1CFD202EE3
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:  273F6D55DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 3E96DE4212587183E5E16BB2C79692A53C19875D
APE Boot skipped on user request
Restoring NPC...
Restarting MCU...
SX4 Bypass Finished
MCU Version V 07.01
MCU Date 23-05-08
Product  RM-303
Manufacturer (c) Nokia           
IMEI  35204*********
Mastercode 41306601
Simlock Server SIMLOCK SERVER
Simlock Key 0010100000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock[1,1] State: OPENED Type: MCC-MNC Data: 00101F
Unlock finished!


digiphone 05-02-2009 17:45

N 2 .......

Code:

BB5 Unlock Started...
MCU Version V 09.42
MCU Date 07-11-08
Product  RM-303
Manufacturer (c) Nokia           
IMEI  35320*********
Mastercode 3064273770
Simlock Server SIMLOCK SERVER
Simlock Key 2680100000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock[1,1] State: CLOSED Type: MCC-MNC Data: 26801F
Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
CMT_SYSTEM_ASIC_ID:  000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  0FE00113E8347D567645822AE219B982DBF1ABB4
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:  273F6D55DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 3E96DE4212587183E5E16BB2C79692A53C19875D
APE Boot skipped on user request
Restarting MCU...
Determined PA Simlock: PA_SL2
Checking for Rootkey Hash support...
Restarting MCU...
Booting RAP...
CMT_SYSTEM_ASIC_ID:  000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  0FE00113E8347D567645822AE219B982DBF1ABB4
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:  273F6D55DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
Received Security Block OK !
Bypassing SX4...
Booting RAP...
CMT_SYSTEM_ASIC_ID:  000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  0FE00113E8347D567645822AE219B982DBF1ABB4
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:  273F6D55DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 3E96DE4212587183E5E16BB2C79692A53C19875D
APE Boot skipped on user request
CMT NPC Ok
CMT NPC Erased
Restarting MCU...
Writing Security Block...
Writing Simlock Key...
SP Accepted, doing reset to update block...
Booting RAP...
CMT_SYSTEM_ASIC_ID:  000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  0FE00113E8347D567645822AE219B982DBF1ABB4
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:  273F6D55DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 3E96DE4212587183E5E16BB2C79692A53C19875D
APE Boot skipped on user request
Restoring NPC...
Restarting MCU...
SX4 Bypass Finished
MCU Version V 09.42
MCU Date 07-11-08
Product  RM-303
Manufacturer (c) Nokia           
IMEI  35320*********
Mastercode 3064273770
Simlock Server SIMLOCK SERVER
Simlock Key 0010100000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock[1,1] State: OPENED Type: MCC-MNC Data: 00101F
Unlock finished!


Sydney_Unlocker 05-03-2009 05:14

E71 Unlocked Successfully
 
Code:

MCU Version    V ICPR71_08w44.2
MCU Date    19-11-08
Product        RM-346
Manufacturer    (c) Nokia
IMEI        351940038187375
Mastercode    453051310
Simlock Server    SIMLOCK SERVER
Simlock Key    5050300014981890
Simlock Profile    8000000000000000
Simlock Key Cnt    0
Simlock FBUS Cnt    0
Simlock[1,1]    State: OPENED    Type: MCC-MNC    Data: 50503F
Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
CMT_SYSTEM_ASIC_ID:    000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:        00000295
CMT_EM_ASIC_ID:        00000B22
CMT_PUBLIC_ID:        12100217E0780052B8C8754FF034BFB149428843
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:        4B9B75103E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC004000800121, Samsung, ONENAND
FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 52570A2086C79E6965175815B5388535CDD5C6F7
APE Boot skipped on user request
Restarting MCU...
Determined PA Simlock: PA_SL2
Checking for Rootkey Hash support...
Restarting MCU...
Booting RAP...
CMT_SYSTEM_ASIC_ID:    000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:        00000295
CMT_EM_ASIC_ID:        00000B22
CMT_PUBLIC_ID:        12100217E0780052B8C8754FF034BFB149428843
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:        4B9B75103E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
Received Security Block OK !
Bypassing SX4...
Booting RAP...
CMT_SYSTEM_ASIC_ID:    000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:        00000295
CMT_EM_ASIC_ID:        00000B22
CMT_PUBLIC_ID:        12100217E0780052B8C8754FF034BFB149428843
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:        4B9B75103E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC004000800121, Samsung, ONENAND
FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 52570A2086C79E6965175815B5388535CDD5C6F7
APE Boot skipped on user request
CMT NPC Ok
CMT NPC Erased
Restarting MCU...
Writing Security Block...
Writing Simlock Key...
SP Accepted, doing reset to update block...
Booting RAP...
CMT_SYSTEM_ASIC_ID:    000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:        00000295
CMT_EM_ASIC_ID:        00000B22
CMT_PUBLIC_ID:        12100217E0780052B8C8754FF034BFB149428843
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:        4B9B75103E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC004000800121, Samsung, ONENAND
FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 52570A2086C79E6965175815B5388535CDD5C6F7
APE Boot skipped on user request
Restoring NPC...
Restarting MCU...
SX4 Bypass Finished
MCU Version    V ICPR71_08w44.2
MCU Date    19-11-08
Product        RM-346
Manufacturer    (c) Nokia
IMEI        351940038187375
Mastercode    453051310
Simlock Server    SIMLOCK SERVER
Simlock Key    0010100000000000
Simlock Profile    8000000000000000
Simlock Key Cnt    0
Simlock FBUS Cnt    0
Simlock[1,1]    State: OPENED    Type: MCC-MNC    Data: 00101F
Unlock finished!

:)

green ghost 05-03-2009 12:46

5610 xm unlock ok
 
Code:

BB5 Unlock Started...
MCU Version V 04.81
MCU Date 22-11-07
Product  RM-242
Manufacturer (c) Nokia           
IMEI  354850021274402
Simlock Server SIMLOCK SERVER
Simlock Key 2140100000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock[1,1] State: CLOSED Type: MCC-MNC Data: 21401F
Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
CMT_SYSTEM_ASIC_ID:  000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  05300218DCAE4F5007B4843E4D41249D6104FAC9
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:  273F6D55DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: EE7EB2973C70788F43BFADFB1AD46A77E51DF8DB
APE Boot skipped on user request
Restarting MCU...
Determined PA Simlock: PA_SL2
Checking for Rootkey Hash support...
Restarting MCU...
Booting RAP...
CMT_SYSTEM_ASIC_ID:  000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  05300218DCAE4F5007B4843E4D41249D6104FAC9
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:  273F6D55DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
Received Security Block OK !
Bypassing SX4...
Booting RAP...
CMT_SYSTEM_ASIC_ID:  000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  05300218DCAE4F5007B4843E4D41249D6104FAC9
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:  273F6D55DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: EE7EB2973C70788F43BFADFB1AD46A77E51DF8DB
APE Boot skipped on user request
CMT NPC Ok
CMT NPC Erased
Restarting MCU...
Writing Security Block...
Writing Simlock Key...
SP Accepted, doing reset to update block...
Booting RAP...
CMT_SYSTEM_ASIC_ID:  000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  05300218DCAE4F5007B4843E4D41249D6104FAC9
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:  273F6D55DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: EE7EB2973C70788F43BFADFB1AD46A77E51DF8DB
APE Boot skipped on user request
Restoring NPC...
Restarting MCU...
SX4 Bypass Finished
MCU Version V 04.81
MCU Date 22-11-07
Product  RM-242
Manufacturer (c) Nokia           
IMEI  354850021274402
Simlock Server SIMLOCK SERVER
Simlock Key 0010100000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock[1,1] State: OPENED Type: MCC-MNC Data: 00101F
Unlock finished!


green ghost 05-03-2009 12:47

6300 unlock ok
 
Code:

All initialized - Ready to work
MCU Version V 07.21
MCU Date 05-11-08
Product  RM-217
Manufacturer (c) Nokia.         
IMEI  353215031538942
IMEI Spare 3A35120513359804
IMEI SV  3335120513359824F5000000
PPM  V 07.21, 05-11-08, RM-217, (c) Nokia.          , C
CNT  Content: c_black_tmo_nl3_allb, V 07.21, 13-01-09, RM-217, (c) Nokia.          , ,
PSN  KQB234614
Product Code 0570608
Module Code 0203166
Basic Product Code 0555543
PSD  0000000000000000
RETU  32
TAHVO  53
AHNE  11
HW  3039
RFIC  17211721
DSP  ICPR61_08w10
BT  06cc-P9.1
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 2041600000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock[1,1] State: CLOSED Type: MCC-MNC Data: 20416F
BB5 Unlock Started...
MCU Version V 07.21
MCU Date 05-11-08
Product  RM-217
Manufacturer (c) Nokia.         
IMEI  353215031538942
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 2041600000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock[1,1] State: CLOSED Type: MCC-MNC Data: 20416F
Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
CMT_SYSTEM_ASIC_ID:  000000010000022600010006010C192101001101
CMT_EM_ASIC_ID:  00000232
CMT_EM_ASIC_ID:  00000353
CMT_PUBLIC_ID:  1CA0010F93637E56FB4158A52AE7951E52B93B13
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:  191EC665DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001004100006A21, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 7F7E6491E8D30494B45630BB3A8599F4E1C674C9
APE Boot skipped on user request
Restarting MCU...
Determined PA Simlock: PA_SL
Checking for Rootkey Hash support...
Restarting MCU...
Booting RAP...
CMT_SYSTEM_ASIC_ID:  000000010000022600010006010C192101001101
CMT_EM_ASIC_ID:  00000232
CMT_EM_ASIC_ID:  00000353
CMT_PUBLIC_ID:  1CA0010F93637E56FB4158A52AE7951E52B93B13
CMT_ASIC_MODE_ID:  00
CMT_ROOT_KEY_HASH:  BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:  191EC665DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
Received Security Block OK !
Writing Security Block...
SP Accepted, doing reset to update block...
MCU Version V 07.21
MCU Date 05-11-08
Product  RM-217
Manufacturer (c) Nokia.         
IMEI  353215031538942
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 2440700000000000
Simlock Profile 8000000000000006
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock[1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock[1,2] State: OPENED Type: GID Data: FFFF
Simlock[1,3] State: OPENED Type: GID Data: FFFF
Simlock[1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock[1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock[2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock[2,2] State: OPENED Type: GID Data: FFFF
Simlock[2,3] State: OPENED Type: GID Data: FFFF
Simlock[2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock[2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock[3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock[3,2] State: OPENED Type: GID Data: FFFF
Simlock[3,3] State: OPENED Type: GID Data: FFFF
Simlock[3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock[3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock[4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock[4,2] State: OPENED Type: GID Data: FFFF
Simlock[4,3] State: OPENED Type: GID Data: FFFF
Simlock[4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock[4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock[5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock[5,2] State: OPENED Type: GID Data: FFFF
Simlock[5,3] State: OPENED Type: GID Data: FFFF
Simlock[5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock[5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock[6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock[6,2] State: OPENED Type: GID Data: FFFF
Simlock[6,3] State: OPENED Type: GID Data: FFFF
Simlock[6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock[6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock[7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock[7,2] State: OPENED Type: GID Data: FFFF
Simlock[7,3] State: OPENED Type: GID Data: FFFF
Simlock[7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock[7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Unlock finished!



All times are GMT +1. The time now is 07:26.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2022 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -

Page generated in 1.51902 seconds with 6 queries

SEO by vBSEO