GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Cyclonebox (https://forum.gsmhosting.com/vbb/f528/)
-   -   Put in this thread all successfull story with Cyclone-box (https://forum.gsmhosting.com/vbb/f528/put-thread-all-successfull-story-cyclone-box-709123/)

RAVI_SINGH 11-30-2010 08:10

N73 Flashing Done
 
Code:

Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing N73_4.0839.42.2.1_western_C00_PRD_cc.fpsx (CMT)...
Booting CMT...
APE_SYSTEM_ASIC_ID: 17100708
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID:  55DFAB35F2DA463316F2B54601B6692E40C21206
APE_ROOT_KEY_HASH: 49A97E826B93BA20B7ED0B082475C00500000000
APE_BOOT_ROM_CRC: 1DFD6613
APE_SECURE_ROM_CRC: 2C872FD4
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  1E70000C04FB01546249016E633013D334E02C2D
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
N73_4.0839.42.2.1_western_C00_PRD_cc.fpsx, Type: Flash Image, Algo: BB5, BB5 ALGORITHM, BB5, OMAP1710 UNISTORE-II-1.2.1  ALG
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC22E8 (Samsung), Size: 16MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
Flashbus Write baud set to 5.0Mbits
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00080000-0x00731951, NOR
EraseArea[0,CMT]: 0x00000000-0x0005FFFF, NOR
EraseArea[0,CMT]: 0x001E0000-0x001FFFFF, NOR
EraseArea[0,CMT]: 0x00880000-0x00FEFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 37.969s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT ADL Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 31.375s
Flashing Speed: 13099.44 kBit/S
Restarting MCU...
Processing N73_4.0839.42.2.1_western_C00_PRD_cc.fpsx (APE)...
Booting CMT...
APE_SYSTEM_ASIC_ID: 17100708
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID:  55DFAB35F2DA463316F2B54601B6692E40C21206
APE_ROOT_KEY_HASH: 49A97E826B93BA20B7ED0B082475C00500000000
APE_BOOT_ROM_CRC: 1DFD6613
APE_SECURE_ROM_CRC: 2C872FD4
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  1E70000C04FB01546249016E633013D334E02C2D
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
N73_4.0839.42.2.1_western_C00_PRD_cc.fpsx, Type: Flash Image, Algo: BB5, BB5 ALGORITHM, BB5, OMAP1710 UNISTORE-II-1.2.1  ALG
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC22E8 (Samsung), Size: 16MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
Searching for BootCode: DualLine 32Bit
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC00A100800015, Samsung, NAND
FlashContent[0,APE]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NAND
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC00A1 (Samsung), Size: 128MBytes, VPP: 21V
h3_sam_nand_xsr.fg, Type: Algorithm, Rev: 0.1.49.0, Algo: OMAP1710 UNISTORE-II-1.2.1  ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
Flashbus Write baud set to 5.0Mbits
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x00000000-0x0007FFFF, NAND
EraseArea[0,APE]: 0x00080000-0x000FFFFF, NAND
EraseArea[0,APE]: 0x00100000-0x0025FFFF, NAND
EraseArea[0,APE]: 0x003C0000-0x04E1FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 1.141s
Writing all blocks...
Writing APE KEYS Certificate...
Writing APE X-LOADER Certificate...
Writing APE PRIMAPP Certificate...
Writing APE SOS+LOADER Certificate...
Writing APE SOS*UPDAPP Certificate...
Writing APE SOS+UZIP Certificate...
Writing APE PAPUBKEYS Certificate...
Writing APE PASUBTOC Certificate...
Writing APE ADL Certificate...
Writing APE SOS+XZIP Certificate...
Writing APE SOS*CORE Certificate...
Writing APE SOS+ROFS Certificate...
Writing APE SOS+ROFX Certificate...
Programming Status OK!
All blocks written OK! Time taken 56.672s
Flashing Speed: 7252.17 kBit/S
Restarting MCU...
Processing N73_rofx_4.0839.42.2.1_PRD.V08 (CMT)...
Processing N73_rofx_4.0839.42.2.1_PRD.V08 (APE)...
Booting CMT...
APE_SYSTEM_ASIC_ID: 17100708
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID:  55DFAB35F2DA463316F2B54601B6692E40C21206
APE_ROOT_KEY_HASH: 49A97E826B93BA20B7ED0B082475C00500000000
APE_BOOT_ROM_CRC: 1DFD6613
APE_SECURE_ROM_CRC: 2C872FD4
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  1E70000C04FB01546249016E633013D334E02C2D
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
N73_rofx_4.0839.42.2.1_PRD.V08, Type: Flash Image, Algo: BB5, OMAP1710 UNISTORE-II-1.2.1  ALG, BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 100Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC22E8 (Samsung), Size: 16MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
Searching for BootCode: DualLine 32Bit
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC00A100800015, Samsung, NAND
FlashContent[0,APE]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NAND
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC00A1 (Samsung), Size: 128MBytes, VPP: 21V
h3_sam_nand_xsr.fg, Type: Algorithm, Rev: 0.1.49.0, Algo: OMAP1710 UNISTORE-II-1.2.1  ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
Flashbus Write baud set to 5.0Mbits
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x03920000-0x04E1FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 0.312s
Writing all blocks...
Writing APE SOS+ROFX Certificate...
Programming Status OK!
All blocks written OK! Time taken 28.531s
Flashing Speed: 4320.79 kBit/S
Restarting MCU...
Processing N73_userarea_4.0839.42.2.1.U02 (CMT)...
Processing N73_userarea_4.0839.42.2.1.U02 (APE)...
Booting CMT...
APE_SYSTEM_ASIC_ID: 17100708
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID:  55DFAB35F2DA463316F2B54601B6692E40C21206
APE_ROOT_KEY_HASH: 49A97E826B93BA20B7ED0B082475C00500000000
APE_BOOT_ROM_CRC: 1DFD6613
APE_SECURE_ROM_CRC: 2C872FD4
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  1E70000C04FB01546249016E633013D334E02C2D
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
N73_userarea_4.0839.42.2.1.U02, Type: Flash Image, Algo: BB5, OMAP1710 UNISTORE-II-1.2.1  ALG, BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 100Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC22E8 (Samsung), Size: 16MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
Searching for BootCode: DualLine 32Bit
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC00A100800015, Samsung, NAND
FlashContent[0,APE]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NAND
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC00A1 (Samsung), Size: 128MBytes, VPP: 21V
h3_sam_nand_xsr.fg, Type: Algorithm, Rev: 0.1.49.0, Algo: OMAP1710 UNISTORE-II-1.2.1  ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,APE]: 0x04E20000-0x07C9FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 0.687s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 10.484s
Flashing Speed: 5908.59 kBit/S
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Post flash tasks finished!
Flashing successfully finished!


RAVI_SINGH 11-30-2010 08:45

5130c flashing
 
Code:

Pre flash tasks finished, continuing...
Processing rm495__07.95.mcusw (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:  00000296
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  0F300111800F7E56DEA9AF5B84463230C6336FA1
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm495__07.95.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0C917F11196FDB7378C18EF7260698CA4489DCA0
Flashbus Write baud set to 5.0Mbits
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x000006BF, NOR
EraseArea[0,CMT]: 0x000006C0-0x0001FFFF, NOR
EraseArea[0,CMT]: 0x00040000-0x000BFFFF, NOR
EraseArea[0,CMT]: 0x000C0000-0x0013FFFF, NOR
EraseArea[0,CMT]: 0x00140000-0x0137FFFF, NOR
EraseArea[0,CMT]: 0x01380000-0x0151FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 91.891s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 46.735s
Flashing Speed: 3266.22 kBit/S
Restarting MCU...
Processing rm495__07.95.mcusw (APE)...
Processing rm495__07.95.ppm_mena_b (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:  00000296
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  0F300111800F7E56DEA9AF5B84463230C6336FA1
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm495__07.95.ppm_mena_b, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0C917F11196FDB7378C18EF7260698CA4489DCA0
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x01520000-0x01DBFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 30.219s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 15.531s
Flashing Speed: 3408.06 kBit/S
Restarting MCU...
Processing rm495__07.95.ppm_mena_b (APE)...
Processing rm495__07.95.image_mena_b_red (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:  00000296
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  0F300111800F7E56DEA9AF5B84463230C6336FA1
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm495__07.95.image_mena_b_red, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0C917F11196FDB7378C18EF7260698CA4489DCA0
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x01DC0000-0x0215FFFF, NOR
EraseArea[0,CMT]: 0x02160000-0x03FBFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 226.562s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 19.156s
Flashing Speed: 3617.04 kBit/S
Restarting MCU...
Processing rm495__07.95.image_mena_b_red (APE)...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Post flash tasks finished!
Flashing successfully finished!


RAVI_SINGH 11-30-2010 08:52

Successfully Flash 5130c
 
Code:

Processing C:\Program Files\Nokia\Phoenix\Products\...
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\...
Found 57 products, Filtering BB5 Products - wait...
8 Products left after filtering. Ready.
Retrieving Variants for Product RM-495 - wait...
123 Variants Retrieved
Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing rm495__07.97.mcusw (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:  00000296
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  1930000AB3D6465029B1AD596ADAC281510804D5
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm495__07.97.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC240000008A31, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC2400 (Samsung), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0C917F11196FDB7378C18EF7260698CA4489DCA0
Flashbus Write baud set to 5.0Mbits
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x000006BF, NOR
EraseArea[0,CMT]: 0x000006C0-0x0001FFFF, NOR
EraseArea[0,CMT]: 0x00040000-0x000BFFFF, NOR
EraseArea[0,CMT]: 0x000C0000-0x0013FFFF, NOR
EraseArea[0,CMT]: 0x00140000-0x0137FFFF, NOR
EraseArea[0,CMT]: 0x01380000-0x0151FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 75.343s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 63.125s
Flashing Speed: 2418.17 kBit/S
Restarting MCU...
Processing rm495__07.97.mcusw (APE)...
Processing rm495__07.97.ppm_s (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:  00000296
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  1930000AB3D6465029B1AD596ADAC281510804D5
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm495__07.97.ppm_s, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC240000008A31, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC2400 (Samsung), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0C917F11196FDB7378C18EF7260698CA4489DCA0
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x01520000-0x01DBFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 26.688s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 28.15s
Flashing Speed: 2400.07 kBit/S
Restarting MCU...
Processing rm495__07.97.ppm_s (APE)...
Processing rm495__07.97.image_s_red (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:  00000296
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  1930000AB3D6465029B1AD596ADAC281510804D5
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm495__07.97.image_s_red, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC240000008A31, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC2400 (Samsung), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0C917F11196FDB7378C18EF7260698CA4489DCA0
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x01DC0000-0x0215FFFF, NOR
EraseArea[0,CMT]: 0x02160000-0x03FBFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 55.906s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 43.547s
Flashing Speed: 2483.07 kBit/S
Restarting MCU...
Processing rm495__07.97.image_s_red (APE)...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Post flash tasks finished!
Flashing successfully finished!


RAVI_SINGH 11-30-2010 11:20

Successfully Flash N96
 
Code:

Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing RM-247_30.033_prd.core.fpsx (CMT)...
Booting CMT...
APE_SYSTEM_ASIC_ID:        008815D3
APE_ASIC_MODE_ID:        00
APE_PUBLIC_ID:                51981138C1481E53DA18EB199C28A1FB9F381929
APE_ROOT_KEY_HASH:        0BBC4203E2D3B82504C75CB65E906A35
APE_BOOT_ROM_CRC:        137A9A3B
APE_SECURE_ROM_CRC:        33259D2C
CMT_SYSTEM_ASIC_ID:        000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:                00000295
CMT_EM_ASIC_ID:                00000B22
CMT_PUBLIC_ID:                128001126172005296ECA5659385A3A65AC41622
CMT_ASIC_MODE_ID:        00
CMT_ROOT_KEY_HASH:        CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC:        4B9B7510
CMT_SECURE_ROM_CRC:        3E691FF8
CMT Ready!
RM-247_30.033_prd.core.fpsx, Type: Flash Image, Algo: BB5, XSR 1.5, N8815 ALG STNFMS, BB5
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.10.16.2, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020880400006B21, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
Searching for BootCode: DualLine 32Bit
FlashChip 0x00208804 (ST), Size: 8MBytes, VPP: 9V
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.10.22.0, Algo: XSR 1.5
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: AD7799ABC45695918C0B8E955FAD5FF12650E6AE
Flashbus Write baud set to 5.0Mbits
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00080000-0x007A6EE9, NOR
EraseArea[0,CMT]: 0x00000000-0x0005FFFF, NOR
EraseArea[0,CMT]: 0x00880000-0x00EFFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 61.156s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 33.797s
Flashing Speed: 24158.11 kBit/S
Restarting MCU...
Processing RM-247_30.033_prd.core.fpsx (APE)...
Booting CMT...
APE_SYSTEM_ASIC_ID:        008815D3
APE_ASIC_MODE_ID:        00
APE_PUBLIC_ID:                51981138C1481E53DA18EB199C28A1FB9F381929
APE_ROOT_KEY_HASH:        0BBC4203E2D3B82504C75CB65E906A35
APE_BOOT_ROM_CRC:        137A9A3B
APE_SECURE_ROM_CRC:        33259D2C
CMT_SYSTEM_ASIC_ID:        000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:                00000295
CMT_EM_ASIC_ID:                00000B22
CMT_PUBLIC_ID:                128001126172005296ECA5659385A3A65AC41622
CMT_ASIC_MODE_ID:        00
CMT_ROOT_KEY_HASH:        CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC:        4B9B7510
CMT_SECURE_ROM_CRC:        3E691FF8
CMT Ready!
RM-247_30.033_prd.core.fpsx, Type: Flash Image, Algo: BB5, XSR 1.5, N8815 ALG STNFMS, BB5
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.10.16.2, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020880400006B21, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
Searching for BootCode: DualLine 32Bit
FlashChip 0x00208804 (ST), Size: 8MBytes, VPP: 9V
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.10.22.0, Algo: XSR 1.5
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: AD7799ABC45695918C0B8E955FAD5FF12650E6AE
Searching for BootCode: DualLine 32Bit
STn8815_2nd.fg, Type: 2nd Boot Loader, Rev: 512.10.22.0, Algo: BB5
Adding FUR Client (APE, State: Start)...
APE FUR Ready!
FlashChip[0,APE]: 0x0000000000000000, Unknown, RAM
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,APE]: 0x002000B100000000, ST, ONENAND
Searching for BootCode: DualLine 32Bit
FlashChip 0x002000B1 (ST), Size: 8MBytes, VPP: 21V
STn8815_STNFMS_alg.fg, Type: Algorithm, Rev: 512.10.22.0, Algo: N8815 ALG STNFMS
Writing APE KEYS Certificate...
Writing APE PASUBTOC Certificate...
Writing APE ALG Certificate...
APE Algorithm Ready!
Adding FUR Client (APE, State: Ready)...
APE FUR Ready!
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: AD7799ABC45695918C0B8E955FAD5FF12650E6AE
Flashbus Write baud set to 5.0Mbits
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x00000000-0x0007FFFF, NAND
EraseArea[0,APE]: 0x00080000-0x000BFFFF, NAND
EraseArea[0,APE]: 0x000E0000-0x0045FFFF, NAND
EraseArea[0,APE]: 0x00840000-0x0A8FFFFF, NAND
Waiting 320s for erasure finish...
Erase taken 2.516s
Writing all blocks...
Writing APE X-LOADER Certificate...
Writing APE KEYS Certificate...
Writing APE PRIMAAPP Certificate...
Writing APE SOS*UPDAPP Certificate...
Writing APE SOS+XZIP Certificate...
Writing APE PASUBTOC Certificate...
Writing APE PAPUBKEYS Certificate...
Writing APE SOS+CORE Certificate...
Writing APE SOS+ROFS1 Certificate...
Programming Status OK!
All blocks written OK! Time taken 141.516s
Flashing Speed: 5769.46 kBit/S
Restarting MCU...
Processing RM-247_30.033_011.1_prd.language.fpsx (CMT)...
Processing RM-247_30.033_011.1_prd.language.fpsx (APE)...
Booting CMT...
APE_SYSTEM_ASIC_ID:        008815D3
APE_ASIC_MODE_ID:        00
APE_PUBLIC_ID:                51981138C1481E53DA18EB199C28A1FB9F381929
APE_ROOT_KEY_HASH:        0BBC4203E2D3B82504C75CB65E906A35
APE_BOOT_ROM_CRC:        137A9A3B
APE_SECURE_ROM_CRC:        33259D2C
CMT_SYSTEM_ASIC_ID:        000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:                00000295
CMT_EM_ASIC_ID:                00000B22
CMT_PUBLIC_ID:                128001126172005296ECA5659385A3A65AC41622
CMT_ASIC_MODE_ID:        00
CMT_ROOT_KEY_HASH:        CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC:        4B9B7510
CMT_SECURE_ROM_CRC:        3E691FF8
CMT Ready!
RM-247_30.033_011.1_prd.language.fpsx, Type: Flash Image, Algo: N8815 ALG STNFMS, BB5, XSR 1.5, BB5
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.10.16.2, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 100Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020880400006B21, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
Searching for BootCode: DualLine 32Bit
FlashChip 0x00208804 (ST), Size: 8MBytes, VPP: 9V
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.10.22.0, Algo: XSR 1.5
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: AD7799ABC45695918C0B8E955FAD5FF12650E6AE
Searching for BootCode: DualLine 32Bit
STn8815_2nd.fg, Type: 2nd Boot Loader, Rev: 512.10.22.0, Algo: BB5
Adding FUR Client (APE, State: Start)...
APE FUR Ready!
FlashChip[0,APE]: 0x0000000000000000, Unknown, RAM
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,APE]: 0x002000B100000000, ST, ONENAND
Searching for BootCode: DualLine 32Bit
FlashChip 0x002000B1 (ST), Size: 8MBytes, VPP: 21V
STn8815_STNFMS_alg.fg, Type: Algorithm, Rev: 512.10.22.0, Algo: N8815 ALG STNFMS
Writing APE KEYS Certificate...
Writing APE PASUBTOC Certificate...
Writing APE ALG Certificate...
APE Algorithm Ready!
Adding FUR Client (APE, State: Ready)...
APE FUR Ready!
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: AD7799ABC45695918C0B8E955FAD5FF12650E6AE
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,APE]: 0x07780000-0x099FFFFF, NAND
Waiting 320s for erasure finish...
Erase taken 0.531s
Writing all blocks...
Writing APE SOS+ROFS2 Certificate...
Programming Status OK!
All blocks written OK! Time taken 22.765s
Flashing Speed: 5428.58 kBit/S
Restarting MCU...
Processing RM-247_30.033_098.1_prd.customer.fpsx (CMT)...
Processing RM-247_30.033_098.1_prd.customer.fpsx (APE)...
Booting CMT...
APE_SYSTEM_ASIC_ID:        008815D3
APE_ASIC_MODE_ID:        00
APE_PUBLIC_ID:                51981138C1481E53DA18EB199C28A1FB9F381929
APE_ROOT_KEY_HASH:        0BBC4203E2D3B82504C75CB65E906A35
APE_BOOT_ROM_CRC:        137A9A3B
APE_SECURE_ROM_CRC:        33259D2C
CMT_SYSTEM_ASIC_ID:        000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:                00000295
CMT_EM_ASIC_ID:                00000B22
CMT_PUBLIC_ID:                128001126172005296ECA5659385A3A65AC41622
CMT_ASIC_MODE_ID:        00
CMT_ROOT_KEY_HASH:        CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC:        4B9B7510
CMT_SECURE_ROM_CRC:        3E691FF8
CMT Ready!
RM-247_30.033_098.1_prd.customer.fpsx, Type: Flash Image, Algo: N8815 ALG STNFMS, BB5, XSR 1.5, BB5
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.10.16.2, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 100Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020880400006B21, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
Searching for BootCode: DualLine 32Bit
FlashChip 0x00208804 (ST), Size: 8MBytes, VPP: 9V
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.10.22.0, Algo: XSR 1.5
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: AD7799ABC45695918C0B8E955FAD5FF12650E6AE
Searching for BootCode: DualLine 32Bit
STn8815_2nd.fg, Type: 2nd Boot Loader, Rev: 512.10.22.0, Algo: BB5
Adding FUR Client (APE, State: Start)...
APE FUR Ready!
FlashChip[0,APE]: 0x0000000000000000, Unknown, RAM
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,APE]: 0x002000B100000000, ST, ONENAND
Searching for BootCode: DualLine 32Bit
FlashChip 0x002000B1 (ST), Size: 8MBytes, VPP: 21V
STn8815_STNFMS_alg.fg, Type: Algorithm, Rev: 512.10.22.0, Algo: N8815 ALG STNFMS
Writing APE KEYS Certificate...
Writing APE PASUBTOC Certificate...
Writing APE ALG Certificate...
APE Algorithm Ready!
Adding FUR Client (APE, State: Ready)...
APE FUR Ready!
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: AD7799ABC45695918C0B8E955FAD5FF12650E6AE
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,APE]: 0x09A00000-0x0A8FFFFF, NAND
Waiting 320s for erasure finish...
Erase taken 0.234s
Writing all blocks...
Writing APE SOS+ROFS3 Certificate...
Programming Status OK!
All blocks written OK! Time taken 0.109s
Flashing Speed: 404.33 kBit/S
Restarting MCU...
Processing RM-247_30.033_100.1_prd.uda.fpsx (CMT)...
Processing RM-247_30.033_100.1_prd.uda.fpsx (APE)...
Booting CMT...
APE_SYSTEM_ASIC_ID:        008815D3
APE_ASIC_MODE_ID:        00
APE_PUBLIC_ID:                51981138C1481E53DA18EB199C28A1FB9F381929
APE_ROOT_KEY_HASH:        0BBC4203E2D3B82504C75CB65E906A35
APE_BOOT_ROM_CRC:        137A9A3B
APE_SECURE_ROM_CRC:        33259D2C
CMT_SYSTEM_ASIC_ID:        000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:                00000295
CMT_EM_ASIC_ID:                00000B22
CMT_PUBLIC_ID:                128001126172005296ECA5659385A3A65AC41622
CMT_ASIC_MODE_ID:        00
CMT_ROOT_KEY_HASH:        CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC:        4B9B7510
CMT_SECURE_ROM_CRC:        3E691FF8
CMT Ready!
RM-247_30.033_100.1_prd.uda.fpsx, Type: Flash Image, Algo: N8815 ALG STNFMS, BB5, XSR 1.5, BB5
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.10.16.2, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 100Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020880400006B21, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
Searching for BootCode: DualLine 32Bit
FlashChip 0x00208804 (ST), Size: 8MBytes, VPP: 9V
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.10.22.0, Algo: XSR 1.5
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: AD7799ABC45695918C0B8E955FAD5FF12650E6AE
Searching for BootCode: DualLine 32Bit
STn8815_2nd.fg, Type: 2nd Boot Loader, Rev: 512.10.22.0, Algo: BB5
Adding FUR Client (APE, State: Start)...
APE FUR Ready!
FlashChip[0,APE]: 0x0000000000000000, Unknown, RAM
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,APE]: 0x002000B100000000, ST, ONENAND
Searching for BootCode: DualLine 32Bit
FlashChip 0x002000B1 (ST), Size: 8MBytes, VPP: 21V
STn8815_STNFMS_alg.fg, Type: Algorithm, Rev: 512.10.22.0, Algo: N8815 ALG STNFMS
Writing APE KEYS Certificate...
Writing APE PASUBTOC Certificate...
Writing APE ALG Certificate...
APE Algorithm Ready!
Adding FUR Client (APE, State: Ready)...
APE FUR Ready!
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: AD7799ABC45695918C0B8E955FAD5FF12650E6AE
Flashbus Write baud set to 5.0Mbits
Started group flash erase
Erase Partition (APE)
Waiting 320s for erasure finish...
Erase taken 1.375s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 19.672s
Flashing Speed: 5479.91 kBit/S
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Post flash tasks finished!
Flashing successfully finished!


RAVI_SINGH 11-30-2010 11:22

7210c Flashing
 
Code:

Processing C:\Program Files\Nokia\Phoenix\Products\...
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\...
Found 59 products, Filtering BB5 Products - wait...
10 Products left after filtering. Ready.
Retrieving Variants for Product RM-436 - wait...
371 Variants Retrieved
Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing rm436__07.23.mcusw (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  21F00106648757500BDD02F63391852288B1496A
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm436__07.23.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: F1DCA5EA5203CD30A64D4D95ABCD621F4AB23026
Flashbus Write baud set to 5.0Mbits
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x000006BF, NOR
EraseArea[0,CMT]: 0x000006C0-0x0001FFFF, NOR
EraseArea[0,CMT]: 0x00040000-0x000BFFFF, NOR
EraseArea[0,CMT]: 0x000C0000-0x0013FFFF, NOR
EraseArea[0,CMT]: 0x00140000-0x0119FFFF, NOR
EraseArea[0,CMT]: 0x011A0000-0x0133FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 92.266s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 46.531s
Flashing Speed: 3255.74 kBit/S
Restarting MCU...
Processing rm436__07.23.mcusw (APE)...
Processing rm436__07.23.ppm_mb (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  21F00106648757500BDD02F63391852288B1496A
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm436__07.23.ppm_mb, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: F1DCA5EA5203CD30A64D4D95ABCD621F4AB23026
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x01340000-0x01BDFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 30.719s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 14.219s
Flashing Speed: 3628.25 kBit/S
Restarting MCU...
Processing rm436__07.23.ppm_mb (APE)...
Processing rm436__07.23.image_mb (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  21F00106648757500BDD02F63391852288B1496A
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm436__07.23.image_mb, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: F1DCA5EA5203CD30A64D4D95ABCD621F4AB23026
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x01BE0000-0x01F7FFFF, NOR
EraseArea[0,CMT]: 0x01F80000-0x03FBFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 232.953s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 47.937s
Flashing Speed: 3547.74 kBit/S
Restarting MCU...
Processing rm436__07.23.image_mb (APE)...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Post flash tasks finished!
Flashing successfully finished!


RAVI_SINGH 11-30-2010 17:13

5130c flashing ok
 
Code:

Processing C:\Program Files\Nokia\Phoenix\Products\...
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\...
Found 58 products, Filtering BB5 Products - wait...
9 Products left after filtering. Ready.
Retrieving Variants for Product RM-495 - wait...
419 Variants Retrieved
Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing rm495__07.95.mcusw (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:  00000296
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  24200119C73D7F563734D94F34343AFCB2B261FF
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm495__07.95.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0C917F11196FDB7378C18EF7260698CA4489DCA0
Flashbus Write baud set to 5.0Mbits
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x000006BF, NOR
EraseArea[0,CMT]: 0x000006C0-0x0001FFFF, NOR
EraseArea[0,CMT]: 0x00040000-0x000BFFFF, NOR
EraseArea[0,CMT]: 0x000C0000-0x0013FFFF, NOR
EraseArea[0,CMT]: 0x00140000-0x0137FFFF, NOR
EraseArea[0,CMT]: 0x01380000-0x0151FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 73.16s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 46.219s
Flashing Speed: 3302.68 kBit/S
Restarting MCU...
Processing rm495__07.95.mcusw (APE)...
Processing rm495__07.95.ppm_mena_b (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:  00000296
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  24200119C73D7F563734D94F34343AFCB2B261FF
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm495__07.95.ppm_mena_b, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0C917F11196FDB7378C18EF7260698CA4489DCA0
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x01520000-0x01DBFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 25.578s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 14.390s
Flashing Speed: 3678.28 kBit/S
Restarting MCU...
Processing rm495__07.95.ppm_mena_b (APE)...
Processing rm495__07.95.image_mena_b_red (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:  00000296
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  24200119C73D7F563734D94F34343AFCB2B261FF
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm495__07.95.image_mena_b_red, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0C917F11196FDB7378C18EF7260698CA4489DCA0
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x01DC0000-0x0215FFFF, NOR
EraseArea[0,CMT]: 0x02160000-0x03FBFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 209.516s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 20.109s
Flashing Speed: 3445.62 kBit/S
Restarting MCU...
Processing rm495__07.95.image_mena_b_red (APE)...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Post flash tasks finished!
Flashing successfully finished!


RAVI_SINGH 11-30-2010 17:16

Successfully Flash 5530
 
Code:

Processing C:\Program Files\Nokia\Phoenix\Products\...
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\...
Found 58 products, Filtering BB5 Products - wait...
9 Products left after filtering. Ready.
Retrieving Variants for Product RM-504 - wait...
96 Variants Retrieved
Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing RM-504_31.0.005_prd.core.C00 (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051105
CMT_EM_ASIC_ID:  00000296
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  10D0000C3A8F0052E295ECF6295271BC6E826BB8
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: B8C3ADECFC997FCD8081D3DEAF870B8C
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
RM-504_31.0.005_prd.core.C00, Type: Flash Image, Algo: XSR 1.5, BB5
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.10.16.2, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC004000000231, Samsung, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0040 (Samsung), Size: 256MBytes, VPP: Not Supported
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.10.22.0, Algo: XSR 1.5
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: F2B05364E563A348608C1C3C9E54FE42AAAA1ACF
Flashbus Write baud set to 5.0Mbits
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00040000-0x00082FFF, ONENAND
EraseArea[0,CMT]: 0x00083400-0x003FFFFF, ONENAND
EraseArea[0,CMT]: 0x00400000-0x007FFFFF, ONENAND
EraseArea[0,CMT]: 0x00800000-0x00D5FFFF, ONENAND
EraseArea[0,CMT]: 0x00D60000-0x09E5FFFF, ONENAND
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 0.953s
Writing all blocks...
Writing CMT ADA Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT RAP3NAND Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT SOS*UPDAPP Certificate...
Writing CMT SOS*ENO Certificate...
Writing CMT SOS*DSP0 Certificate...
Writing CMT SOS*ISASW Certificate...
Writing CMT SOS+CORE Certificate...
Writing CMT SOS+ROFS1 Certificate...
Programming Status OK!
All blocks written OK! Time taken 118.406s
Flashing Speed: 7284.63 kBit/S
Restarting MCU...
Processing RM-504_31.0.005_prd.core.C00 (APE)...
Processing RM-504_31.0.005_prd.rofs2.V12 (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051105
CMT_EM_ASIC_ID:  00000296
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  10D0000C3A8F0052E295ECF6295271BC6E826BB8
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: B8C3ADECFC997FCD8081D3DEAF870B8C
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
RM-504_31.0.005_prd.rofs2.V12, Type: Flash Image, Algo: XSR 1.5, BB5
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.10.16.2, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC004000000231, Samsung, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0040 (Samsung), Size: 256MBytes, VPP: Not Supported
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.10.22.0, Algo: XSR 1.5
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: F2B05364E563A348608C1C3C9E54FE42AAAA1ACF
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x07260000-0x0935FFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.188s
Writing all blocks...
Writing CMT SOS+ROFS2 Certificate...
Programming Status OK!
All blocks written OK! Time taken 23.906s
Flashing Speed: 7134.96 kBit/S
Restarting MCU...
Processing RM-504_31.0.005_prd.rofs2.V12 (APE)...
Processing RM-504_31.0.005_C01_prd.rofs3.fpsx (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051105
CMT_EM_ASIC_ID:  00000296
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  10D0000C3A8F0052E295ECF6295271BC6E826BB8
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: B8C3ADECFC997FCD8081D3DEAF870B8C
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
RM-504_31.0.005_C01_prd.rofs3.fpsx, Type: Flash Image, Algo: XSR 1.5, BB5
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.10.16.2, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC004000000231, Samsung, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0040 (Samsung), Size: 256MBytes, VPP: Not Supported
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.10.22.0, Algo: XSR 1.5
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: F2B05364E563A348608C1C3C9E54FE42AAAA1ACF
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x09360000-0x09E5FFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.78s
Writing all blocks...
Writing CMT SOS+ROFS3 Certificate...
Programming Status OK!
All blocks written OK! Time taken 6.125s
Flashing Speed: 6904.28 kBit/S
Restarting MCU...
Processing RM-504_31.0.005_C01_prd.rofs3.fpsx (APE)...
Processing RM-504_31.0.005_007_000_U001.uda.fpsx (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051105
CMT_EM_ASIC_ID:  00000296
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  10D0000C3A8F0052E295ECF6295271BC6E826BB8
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: B8C3ADECFC997FCD8081D3DEAF870B8C
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
RM-504_31.0.005_007_000_U001.uda.fpsx, Type: Flash Image, Algo: XSR 1.5, BB5
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.10.16.2, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC004000000231, Samsung, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0040 (Samsung), Size: 256MBytes, VPP: Not Supported
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.10.22.0, Algo: XSR 1.5
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: F2B05364E563A348608C1C3C9E54FE42AAAA1ACF
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x09E60000-0x0F71FFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.500s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 8.172s
Flashing Speed: 6296.04 kBit/S
Restarting MCU...
Processing RM-504_31.0.005_007_000_U001.uda.fpsx (APE)...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Post flash tasks finished!
Flashing successfully finished!


RAVI_SINGH 11-30-2010 17:17

5310 flashing
 
Code:

Processing C:\Program Files\Nokia\Phoenix\Products\...
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\...
Found 59 products, Filtering BB5 Products - wait...
10 Products left after filtering. Ready.
Retrieving Variants for Product RM-303 - wait...
498 Variants Retrieved
Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing rm303__09.42.mcusw (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  1A200214E0640254B1D4828918C7C8B905CABFD7
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm303__09.42.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC220C (Samsung), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 3E96DE4212587183E5E16BB2C79692A53C19875D
Flashbus Write baud set to 5.0Mbits
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x000006BF, NOR
EraseArea[0,CMT]: 0x000006C0-0x0001FFFF, NOR
EraseArea[0,CMT]: 0x00040000-0x000BFFFF, NOR
EraseArea[0,CMT]: 0x000C0000-0x0013FFFF, NOR
EraseArea[0,CMT]: 0x00140000-0x010DFFFF, NOR
EraseArea[0,CMT]: 0x010E0000-0x0121FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 44.188s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 98.719s
Flashing Speed: 1450.30 kBit/S
Restarting MCU...
Processing rm303__09.42.mcusw (APE)...
Processing rm303__09.42.ppm_m4 (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  1A200214E0640254B1D4828918C7C8B905CABFD7
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm303__09.42.ppm_m4, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC220C (Samsung), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 3E96DE4212587183E5E16BB2C79692A53C19875D
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x01220000-0x0189FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 12.500s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 28.453s
Flashing Speed: 1432.16 kBit/S
Restarting MCU...
Processing rm303__09.42.ppm_m4 (APE)...
Processing rm303__09.42.image_m4_red (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  1A200214E0640254B1D4828918C7C8B905CABFD7
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm303__09.42.image_m4_red, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC220C (Samsung), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 3E96DE4212587183E5E16BB2C79692A53C19875D
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x018A0000-0x01B1FFFF, NOR
EraseArea[0,CMT]: 0x01B20000-0x03FBFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 101.640s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 42.407s
Flashing Speed: 1584.37 kBit/S
Restarting MCU...
Processing rm303__09.42.image_m4_red (APE)...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Post flash tasks finished!
Flashing successfully finished!


RAVI_SINGH 11-30-2010 17:18

5220i flashing done
 
Code:

Processing C:\Program Files\Nokia\Phoenix\Products\...
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\...
Found 60 products, Filtering BB5 Products - wait...
11 Products left after filtering. Ready.
Retrieving Variants for Product RM-411 - wait...
259 Variants Retrieved
Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing rm411__07.23.mcusw (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  15100103F5E55850F241BD6DCC6029272BED99F7
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm411__07.23.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: D93826B23E9B093BE4DD7304FBAA6778996AE60B
Flashbus Write baud set to 5.0Mbits
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x000006BF, NOR
EraseArea[0,CMT]: 0x000006C0-0x0001FFFF, NOR
EraseArea[0,CMT]: 0x00040000-0x000BFFFF, NOR
EraseArea[0,CMT]: 0x000C0000-0x0013FFFF, NOR
EraseArea[0,CMT]: 0x00140000-0x0137FFFF, NOR
EraseArea[0,CMT]: 0x01380000-0x0151FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 75.484s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 54.31s
Flashing Speed: 3092.93 kBit/S
Restarting MCU...
Processing rm411__07.23.mcusw (APE)...
Processing rm411__07.23.ppm_mb (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  15100103F5E55850F241BD6DCC6029272BED99F7
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm411__07.23.ppm_mb, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: D93826B23E9B093BE4DD7304FBAA6778996AE60B
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x01520000-0x01DBFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 24.735s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 15.313s
Flashing Speed: 3425.84 kBit/S
Restarting MCU...
Processing rm411__07.23.ppm_mb (APE)...
Processing rm411__07.23.image_mb_b_red (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  15100103F5E55850F241BD6DCC6029272BED99F7
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm411__07.23.image_mb_b_red, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: D93826B23E9B093BE4DD7304FBAA6778996AE60B
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x01DC0000-0x0215FFFF, NOR
EraseArea[0,CMT]: 0x02160000-0x03FBFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 160.265s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 18.859s
Flashing Speed: 3507.00 kBit/S
Restarting MCU...
Processing rm411__07.23.image_mb_b_red (APE)...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Post flash tasks finished!
Flashing successfully finished!


shahzad2010 12-01-2010 11:04

2220s unlocking
 
Code:

All initialized - Ready to work
MCU Version V 09.55
MCU Date 12-11-09
Product  RM-590
Manufacturer (c) Nokia           
IMEI  354347046976749
Mastercode 4536705744
IMEI Spare 3A45430764797604
IMEI SV  3345430764797654F2000000
PPM  V 09.55, 12-11-09, RM-590, (c) Nokia            , T
CNT  Content: vodafone AU, V 09.55, 12-11-09, RM-590, (c) Nokia            , ,
PSN  DPZ255355
Product Code 059C0Q4
Module Code 0204340
Basic Product Code 0582851
PSD  0000000D00000000
LPSN  0
HW  1000
UEM  1328
UPP  3168
RFIC  0500
DSP  ICPR72_09w46_U
LCD  SUEZ
Asic  11
HW Signature 2CF52EA18119B219
Simlock Server SIMLOCK SERVER
Simlock Key 5050300014981890
Simlock Profile 800000000003000B
Simlock Aux 000B5555
Simlock IMEI 00553543470469767400
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 50503F
MCU Version V 09.55
MCU Date 12-11-09
Product  RM-590
Manufacturer (c) Nokia           
IMEI  354347046976749
Mastercode 4536705744
Proceeding with RSA Unlock...
Setting Local Mode...
Local mode Set
Asic  11
HW Signature 2CF52EA18119B219
Simlock Server SIMLOCK SERVER
Simlock Key 5050300014981890
Simlock Profile 800000000003000B
Simlock Aux 000B5555
Simlock IMEI 00553543470469767400
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 50503F
Asking card to sign HW Signature...
Signed OK (3C2AF8D093EC5AA8C8406A7CF39F3E2A8618CE15)
Calculating SP...
Writing SP...
New SP Accepted OK!


RAVI_SINGH 12-01-2010 17:12

5130c flashing
 
Code:

Processing C:\Program Files\Nokia\Phoenix\Products\...
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\...
Found 60 products, Filtering BB5 Products - wait...
11 Products left after filtering. Ready.
Retrieving Variants for Product RM-495 - wait...
62 Variants Retrieved
Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing rm495__07.96.mcusw (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:  00000296
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  1490010E6EF38C564A83402CE1F8D59F167F4CC0
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm495__07.96.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC240000008A31, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC2400 (Samsung), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0C917F11196FDB7378C18EF7260698CA4489DCA0
Flashbus Write baud set to 5.0Mbits
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x000006BF, NOR
EraseArea[0,CMT]: 0x000006C0-0x0001FFFF, NOR
EraseArea[0,CMT]: 0x00040000-0x000BFFFF, NOR
EraseArea[0,CMT]: 0x000C0000-0x0013FFFF, NOR
EraseArea[0,CMT]: 0x00140000-0x0137FFFF, NOR
EraseArea[0,CMT]: 0x01380000-0x0151FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 74.954s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 67.47s
Flashing Speed: 2276.71 kBit/S
Restarting MCU...
Processing rm495__07.96.mcusw (APE)...
Processing rm495__07.96.ppm_t (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:  00000296
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  1490010E6EF38C564A83402CE1F8D59F167F4CC0
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm495__07.96.ppm_t, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC240000008A31, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC2400 (Samsung), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0C917F11196FDB7378C18EF7260698CA4489DCA0
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x01520000-0x01DBFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 27.375s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 27.125s
Flashing Speed: 2296.61 kBit/S
Restarting MCU...
Processing rm495__07.96.ppm_t (APE)...
Processing rm495__07.96.image_t_au_red (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:  00000296
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  1490010E6EF38C564A83402CE1F8D59F167F4CC0
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm495__07.96.image_t_au_red, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC240000008A31, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC2400 (Samsung), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0C917F11196FDB7378C18EF7260698CA4489DCA0
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x01DC0000-0x0215FFFF, NOR
EraseArea[0,CMT]: 0x02160000-0x03FBFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 58.734s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 35.375s
Flashing Speed: 2433.49 kBit/S
Restarting MCU...
Processing rm495__07.96.image_t_au_red (APE)...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Post flash tasks finished!
Flashing successfully finished!


RAVI_SINGH 12-01-2010 17:14

3110c Contact Service Remove With Cyclone Box
 
Code:

Started Phone Security Analysis...
MCU Version V 07.21
MCU Date 05-11-08
Product  RM-237
Manufacturer (c) Nokia.         
IMEI  351939036592214
Mastercode 64415316
Reading Security Block...
Security block OK and saved to "RM-237_351939036592214_1212010_54518 PM.SecurityBlock.PM"
Step 1 : Testing SIMLOCK
SIMLOCK SEFLTEST PASSED OK!
Step 2 : Testing SECURITY
SECURITY SEFLTEST PASSED OK!
Step 3 : Analyzing Security Block
WARNING: "1F9001150C307E56D44856BC1DF163B0E12FB5F9.C0000B78" Not Exists, Will read it...
Reading CYC file from phone...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID:  00000232
CMT_EM_ASIC_ID:  00000353
CMT_PUBLIC_ID:  1F9001150C307E56D44856BC1DF163B0E12FB5F9
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC: 191EC665
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
Readed OK, Saving to "1F9001150C307E56D44856BC1DF163B0E12FB5F9.C0000B78"
Checking SUPERDONGLE...
SUPERDONGLE FOUND AND CHECKSUM OK! PASSED!
Checking SIMLOCK...
SIMLOCK FOUND AND CHECKSUM OK! PASSED!
Checking MCU&DSP TIMESTAMPS...
MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED!
Checking CMLA KEYS...
CMLA KEYS FOUND AND CHECKSUM OK! PASSED!
Checking ECC KEYS...
ECC KEYS FOUND AND CHECKSUM OK! PASSED!
Checking DIV KEYS...
DIV KEYS FOUND AND CHECKSUM OK! PASSED!
Analyze finished!
SX4 Authorization / SD Repair Procedure Started....
"1F9001150C307E56D44856BC1DF163B0E12FB5F9.C0000B78" Exists, That is good...
MCU Version V 07.21
MCU Date 05-11-08
Product  RM-237
Manufacturer (c) Nokia.         
IMEI  351939036592214
Mastercode 64415316
Reading Security Block...
Security block OK and saved to "RM-237_351939036592214_1212010_54545 PM.SecurityBlock.PM"
SX4 Status: Not authorized (76)
Started mutual authenthication with card...
Receiving Phone Seed 1...
Phone Seed 1 Received
Sending calculated Data 1, and expecting Seed 2...
Calculated Data 1 accepted, Phone Seed 2 Received
Sending calculated Data 2
Calculated Data 2 sent, Checking Authorization Status again
Authorization successfully finished!
Looking for Virgin PM In Database...
Found, writing...
[1,0] Written, Length: 114 bytes, Status: OK
[1,2] Written, Length: 98 bytes, Status: OK
[1,4] Written, Length: 110 bytes, Status: OK
[1,6] Written, Length: 98 bytes, Status: OK
[1,8] Written, Length: 110 bytes, Status: OK
[1,13] Written, Length: 98 bytes, Status: OK
[1,16] Written, Length: 86 bytes, Status: OK
[1,18] Written, Length: 86 bytes, Status: OK
[1,20] Written, Length: 86 bytes, Status: OK
[1,25] Written, Length: 4 bytes, Status: OK
[1,29] Written, Length: 6 bytes, Status: OK
[1,34] Written, Length: 80 bytes, Status: OK
[309,0] Written, Length: 4 bytes, Status: OK
[309,1] Written, Length: 2 bytes, Status: OK
[309,2] Written, Length: 12 bytes, Status: OK
[309,4] Written, Length: 12 bytes, Status: OK
[309,5] Written, Length: 12 bytes, Status: OK
[309,7] Written, Length: 12 bytes, Status: OK
[309,8] Written, Length: 12 bytes, Status: OK
[309,17] Written, Length: 12 bytes, Status: OK
[309,22] Written, Length: 12 bytes, Status: OK
Write PM Finished, Record written OK: 21, Record written NOT OK: 0
BB5 Unlock Started...
MCU Version V 07.21
MCU Date 05-11-08
Product  RM-237
Manufacturer (c) Nokia.         
IMEI  351939036592214
Mastercode 64415316
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Reading Security Block...
Security block OK and saved to "RM-237_351939036592214_1212010_54616 PM.SecurityBlock.PM"
"1F9001150C307E56D44856BC1DF163B0E12FB5F9.C0000B78" Exists, That is good...
Checking for Rootkey Hash support with selected Unlock Method...
Selected Unlock Method: RPL Calculation
Asking box to calculate RPL...
Received RPL from Box OK!
Writing Simlock...
Simlock ACCEPTED OK !
MCU Version V 07.21
MCU Date 05-11-08
Product  RM-237
Manufacturer (c) Nokia.         
IMEI  351939036592214
Mastercode 64415316
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 2440700000000000
Simlock Profile 8000000000000006
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Unlock finished! Time taken 4.156s


dapx 12-01-2010 19:18

Nokia X3 FULL FLASH DONE!!!! Thanks Cyclone Team!!!
 
Nokia X3 FULL FLASH DONE!!!! Thanks Cyclone Team!!!
I'm Happy Done in 2 Minutes!!!

Code:

Scanning avaiable products...
Processing C:\Archivos de programa\Nokia\Phoenix\Products\...
Found 63 products, Filtering BB5 Products - wait...
36 Products left after filtering. Ready.
Retrieving Variants for Product RM-540 - wait...
295 Variants Retrieved
Booting CMT...
CMT_SYSTEM_ASIC_ID:    000000010000022600000001020C192102034100
CMT_EM_ASIC_ID:        00001040
CMT_EM_ASIC_ID:        00001030
CMT_PUBLIC_ID:        02B001085E440E492DAA9E9F5799A6058C29B584
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    7B045400E1752022F9EB80B0DEA9C65D
CMT_BOOT_ROM_CRC:    67E82268
CMT_SECURE_ROM_CRC:    F29CEA60
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAP3Gv40_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.22.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC003000000321, Samsung, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0030 (Samsung), Size: 128MBytes, VPP: Not Supported
RAP3Gv40_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.22.0, Algo: XSR 1.6
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: CEFA9C410038BD7D17C4C6F107F1EC02C98CA69E
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Started Phone Security Analysis...
MCU Version    V 08.40
MCU Date    25-05-10
Product        RM-540
Manufacturer    (c) Nokia           
IMEI        35936
Mastercode    336423141
Reading Security Block...
Security block OK and saved to "RM-540_359367_01122010_150732.SecurityBlock.PM"
Step 1 : Testing SIMLOCK
SIMLOCK SEFLTEST PASSED OK!
Step 2 : Testing SECURITY
SECURITY SEFLTEST PASSED OK!
Step 3 : Analyzing Security Block
WARNING: "02B001085E440E492DAA9E9F5799A6058C29B584.C0001FF6" Not Exists, Will read it...
Reading CYC file from phone...
Booting CMT...
CMT_SYSTEM_ASIC_ID:    000000010000022600000001020C192102034100
CMT_EM_ASIC_ID:        00001040
CMT_EM_ASIC_ID:        00001030
CMT_PUBLIC_ID:        02B001085E440E492DAA9E9F5799A6058C29B584
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    7B045400E1752022F9EB80B0DEA9C65D
CMT_BOOT_ROM_CRC:    67E82268
CMT_SECURE_ROM_CRC:    F29CEA60
CMT Ready!
Prepare phone failed with message -> Not found required CMT Secondary Loader
Neither CYC file and exists or failed to read it from phone (Failed to Boot / Prepare Phone)
Analyze Security Error -> Failed to obtain Phone Unique Data
Booting CMT...
CMT_SYSTEM_ASIC_ID:    000000010000022600000001020C192102034100
CMT_EM_ASIC_ID:        00001040
CMT_EM_ASIC_ID:        00001030
CMT_PUBLIC_ID:        02B001085E440E492DAA9E9F5799A6058C29B584
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    7B045400E1752022F9EB80B0DEA9C65D
CMT_BOOT_ROM_CRC:    67E82268
CMT_SECURE_ROM_CRC:    F29CEA60
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAP3Gv40_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.22.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC003000000321, Samsung, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0030 (Samsung), Size: 128MBytes, VPP: Not Supported
RAP3Gv40_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.22.0, Algo: XSR 1.6
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: CEFA9C410038BD7D17C4C6F107F1EC02C98CA69E
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Booting CMT...
CMT_SYSTEM_ASIC_ID:    000000010000022600000001020C192102034100
CMT_EM_ASIC_ID:        00001040
CMT_EM_ASIC_ID:        00001030
CMT_PUBLIC_ID:        02B001085E440E492DAA9E9F5799A6058C29B584
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    7B045400E1752022F9EB80B0DEA9C65D
CMT_BOOT_ROM_CRC:    67E82268
CMT_SECURE_ROM_CRC:    F29CEA60
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAP3Gv40_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.22.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC003000000321, Samsung, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0030 (Samsung), Size: 128MBytes, VPP: Not Supported
RAP3Gv40_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.22.0, Algo: XSR 1.6
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: CEFA9C410038BD7D17C4C6F107F1EC02C98CA69E
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Processing pre flash tasks...
Backing up RPL...
RPL Creation started...
Processing CMT Part...
Storing Product Code...
Storing PSN...
Storing HWID...
Trying to store Simlock...
Reading Configuration Key...
Hashing...
Reading SHA1-RSA Signature...
Reading SHA1-HMAC Signature...
Storing Simlock...
Trying to store WMDRM RPL...
Reading Keys...
Storing WMDRM PD...
Reading Security Block...
Security block OK and saved to "RM-540_359367038220026_01122010_151058.SecurityBlock.PM"
WARNING: "02B001085E440E492DAA9E9F5799A6058C29B584.C0001FF6" Not Exists, Will read it...
Reading CYC file from phone...
Booting CMT...
CMT_SYSTEM_ASIC_ID:    000000010000022600000001020C192102034100
CMT_EM_ASIC_ID:        00001040
CMT_EM_ASIC_ID:        00001030
CMT_PUBLIC_ID:        02B001085E440E492DAA9E9F5799A6058C29B584
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    7B045400E1752022F9EB80B0DEA9C65D
CMT_BOOT_ROM_CRC:    67E82268
CMT_SECURE_ROM_CRC:    F29CEA60
CMT Ready!
Prepare phone failed with message -> Not found required CMT Secondary Loader
Neither CYC file and exists or failed to read it from phone (Failed to Boot / Prepare Phone)
Booting CMT...
CMT_SYSTEM_ASIC_ID:    000000010000022600000001020C192102034100
CMT_EM_ASIC_ID:        00001040
CMT_EM_ASIC_ID:        00001030
CMT_PUBLIC_ID:        02B001085E440E492DAA9E9F5799A6058C29B584
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    7B045400E1752022F9EB80B0DEA9C65D
CMT_BOOT_ROM_CRC:    67E82268
CMT_SECURE_ROM_CRC:    F29CEA60
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAP3Gv40_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.22.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC003000000321, Samsung, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0030 (Samsung), Size: 128MBytes, VPP: Not Supported
RAP3Gv40_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.22.0, Algo: XSR 1.6
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: CEFA9C410038BD7D17C4C6F107F1EC02C98CA69E
APE Subsystem Not Found
Flashbus Write baud set to 5.0Mbits
Storing NPC...
Storing CCC...
Storing HWC...
CMT VARIANT Not Found
Restarting MCU...
RPL Saved OK
RPL backup thread finished, continuing...
Backing up simlock...
MCU Version    V 08.40
MCU Date    25-05-10
Product        RM-540
Manufacturer    (c) Nokia           
IMEI        35936
Mastercode    336423141
Simlock backup OK, saved to RM-540_35936_01122010_151110.SLBackup.PM
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm540__08.50.mcusw (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID:    000000010000022600000001020C192102034100
CMT_EM_ASIC_ID:        00001040
CMT_EM_ASIC_ID:        00001030
CMT_PUBLIC_ID:        02B001085E440E492DAA9E9F5799A6058C29B584
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    7B045400E1752022F9EB80B0DEA9C65D
CMT_BOOT_ROM_CRC:    67E82268
CMT_SECURE_ROM_CRC:    F29CEA60
CMT Ready!
rm540__08.50.mcusw, Type: Flash Image, Algo: BB5, XSR 1.6
Searching for BootCode: DualLine 32Bit
RAP3Gv40_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.22.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC003000000321, Samsung, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0030 (Samsung), Size: 128MBytes, VPP: Not Supported
RAP3Gv40_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.22.0, Algo: XSR 1.6
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: CEFA9C410038BD7D17C4C6F107F1EC02C98CA69E
Flashbus Write baud set to 5.0Mbits
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00020000-0x000203FF, ONENAND
EraseArea[0,CMT]: 0x00060000-0x0009FFFF, ONENAND
EraseArea[0,CMT]: 0x000A0000-0x0025FFFF, ONENAND
EraseArea[0,CMT]: 0x003E0000-0x005DFFFF, ONENAND
EraseArea[0,CMT]: 0x005E0000-0x010DFFFF, ONENAND
EraseArea[0,CMT]: 0x01EC0000-0x01EDFFFF, ONENAND
EraseArea[0,CMT]: 0x027C0000-0x02CBFFFF, ONENAND
EraseArea[0,CMT]: 0x077C0000-0x07B3FFFF, ONENAND
EraseArea[0,CMT]: 0x010E0000-0x01EBFFFF, ONENAND
Erase Partition (CMT)
Erase Partition (CMT)
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 0.562s
Writing all blocks...
Writing CMT ADA Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT RAP3NAND Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Writing CMT MCUSW1 Certificate...
Writing CMT GENIO_INIT Certificate...
Writing CMT ISA+DYNSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 34.812s
Flashing Speed: 6289,52 kBit/S
Restarting MCU...
Processing rm540__08.50.mcusw (APE)...
Processing rm540__08.50.ppm_c (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID:    000000010000022600000001020C192102034100
CMT_EM_ASIC_ID:        00001040
CMT_EM_ASIC_ID:        00001030
CMT_PUBLIC_ID:        02B001085E440E492DAA9E9F5799A6058C29B584
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    7B045400E1752022F9EB80B0DEA9C65D
CMT_BOOT_ROM_CRC:    67E82268
CMT_SECURE_ROM_CRC:    F29CEA60
CMT Ready!
rm540__08.50.ppm_c, Type: Flash Image, Algo: BB5, XSR 1.6
Searching for BootCode: DualLine 32Bit
RAP3Gv40_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.22.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC003000000321, Samsung, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0030 (Samsung), Size: 128MBytes, VPP: Not Supported
RAP3Gv40_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.22.0, Algo: XSR 1.6
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: CEFA9C410038BD7D17C4C6F107F1EC02C98CA69E
Flashbus Write baud set to 5.0Mbits
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x01EE0000-0x027BFFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.78s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 8.563s
Flashing Speed: 5891,43 kBit/S
Restarting MCU...
Processing rm540__08.50.ppm_c (APE)...
Processing rm540__08.50.image_c_0581134_004 (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID:    000000010000022600000001020C192102034100
CMT_EM_ASIC_ID:        00001040
CMT_EM_ASIC_ID:        00001030
CMT_PUBLIC_ID:        02B001085E440E492DAA9E9F5799A6058C29B584
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    7B045400E1752022F9EB80B0DEA9C65D
CMT_BOOT_ROM_CRC:    67E82268
CMT_SECURE_ROM_CRC:    F29CEA60
CMT Ready!
rm540__08.50.image_c_0581134_004, Type: Flash Image, Algo: BB5, XSR 1.6
Searching for BootCode: DualLine 32Bit
RAP3Gv40_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.22.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC003000000321, Samsung, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0030 (Samsung), Size: 128MBytes, VPP: Not Supported
RAP3Gv40_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.22.0, Algo: XSR 1.6
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: CEFA9C410038BD7D17C4C6F107F1EC02C98CA69E
Flashbus Write baud set to 5.0Mbits
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x02CC0000-0x077BFFFF, ONENAND
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 1.156s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 18.687s
Flashing Speed: 6345,45 kBit/S
Restarting MCU...
Processing rm540__08.50.image_c_0581134_004 (APE)...
All images processed OK! Processing post flash tasks...
Reading info...
MCU Version    V 08.50
MCU Date    19-07-10
Product        RM-540
Manufacturer    (c) Nokia           
IMEI        35936
Mastercode    336423141
IMEI Spare    3A9563
IMEI SV        3395630783220052F0000000
PPM        V 08.50, 19-07-10, RM-540, (c) Nokia            , C
CNT        Content: c_0581134, V 08.50, 19-07-10, RM-540, (c) Nokia           
PSN        RKB890313
Product Code    0591775
Module Code    0204201
Basic Product Code    0575592
PSD        0000000000000000
LPSN        0
RETU        40
TAHVO        00
AHNE        41
HW        3000
RFIC        0800
DSP        ICPR91_10w11_2
LCD        SEIKO
BT        1673-46038
Simlock Server    SIMLOCK SERVER
Simlock Key    2440700000000000
Simlock Profile    0000000000000000
Simlock Key Cnt    0
Simlock FBUS Cnt    0
Simlock [1,1]    State: OPENED    Type: MCC-MNC    Data: FFFFFF
Simlock [1,2]    State: OPENED    Type: GID    Data: FFFF
Simlock [1,3]    State: OPENED    Type: GID    Data: FFFF
Simlock [1,4]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [1,5]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [2,1]    State: OPENED    Type: MCC-MNC    Data: FFFFFF
Simlock [2,2]    State: OPENED    Type: GID    Data: FFFF
Simlock [2,3]    State: OPENED    Type: GID    Data: FFFF
Simlock [2,4]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [2,5]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [3,1]    State: OPENED    Type: MCC-MNC    Data: FFFFFF
Simlock [3,2]    State: OPENED    Type: GID    Data: FFFF
Simlock [3,3]    State: OPENED    Type: GID    Data: FFFF
Simlock [3,4]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [3,5]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [4,1]    State: OPENED    Type: MCC-MNC    Data: FFFFFF
Simlock [4,2]    State: OPENED    Type: GID    Data: FFFF
Simlock [4,3]    State: OPENED    Type: GID    Data: FFFF
Simlock [4,4]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [4,5]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [5,1]    State: OPENED    Type: MCC-MNC    Data: FFFFFF
Simlock [5,2]    State: OPENED    Type: GID    Data: FFFF
Simlock [5,3]    State: OPENED    Type: GID    Data: FFFF
Simlock [5,4]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [5,5]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [6,1]    State: OPENED    Type: MCC-MNC    Data: FFFFFF
Simlock [6,2]    State: OPENED    Type: GID    Data: FFFF
Simlock [6,3]    State: OPENED    Type: GID    Data: FFFF
Simlock [6,4]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [6,5]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [7,1]    State: OPENED    Type: MCC-MNC    Data: FFFFFF
Simlock [7,2]    State: OPENED    Type: GID    Data: FFFF
Simlock [7,3]    State: OPENED    Type: GID    Data: FFFF
Simlock [7,4]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [7,5]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!


themobileshop 12-02-2010 08:08

2220s unlock done with cyclon 100% works
 
http://img40.imageshack.us/i/2220sunlockdone03.jpg

RAVI_SINGH 12-03-2010 13:18

6300 flashing
 
Code:

Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing rm217__07.21.mcusw (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID:  00000232
CMT_EM_ASIC_ID:  00000353
CMT_PUBLIC_ID:  28B0001954196156DC2BEA7C62879A2307CCF05B
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC: 191EC665
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm217__07.21.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0001002F00006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x0001002F (AMD), Size: 32MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 7F7E6491E8D30494B45630BB3A8599F4E1C674C9
Flashbus Write baud set to 5.0Mbits
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x000006BF, NOR
EraseArea[0,CMT]: 0x000006C0-0x0001FFFF, NOR
EraseArea[0,CMT]: 0x00020000-0x0007FFFF, NOR
EraseArea[0,CMT]: 0x00080000-0x000DFFFF, NOR
EraseArea[0,CMT]: 0x00100000-0x001FFFFF, NOR
EraseArea[0,CMT]: 0x00200000-0x0031FFFF, NOR
EraseArea[0,CMT]: 0x00320000-0x0105FFFF, NOR
EraseArea[0,CMT]: 0x01060000-0x01067FFF, NOR
EraseArea[0,CMT]: 0x01068000-0x0107FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 74.422s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Writing CMT PMM_CONF Certificate...
Writing CMT SBIF_CONF Certificate...
Programming Status OK!
All blocks written OK! Time taken 73.250s
Flashing Speed: 1660.27 kBit/S
Restarting MCU...
Processing rm217__07.21.mcusw (APE)...
Processing rm217__07.21.ppm_mea4 (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID:  00000232
CMT_EM_ASIC_ID:  00000353
CMT_PUBLIC_ID:  28B0001954196156DC2BEA7C62879A2307CCF05B
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC: 191EC665
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm217__07.21.ppm_mea4, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0001002F00006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x0001002F (AMD), Size: 32MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 7F7E6491E8D30494B45630BB3A8599F4E1C674C9
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x01080000-0x015FFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 19.46s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 18.797s
Flashing Speed: 1690.54 kBit/S
Restarting MCU...
Processing rm217__07.21.ppm_mea4 (APE)...
Processing rm217__07.21.image_mea4 (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID:  00000232
CMT_EM_ASIC_ID:  00000353
CMT_PUBLIC_ID:  28B0001954196156DC2BEA7C62879A2307CCF05B
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC: 191EC665
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm217__07.21.image_mea4, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0001002F00006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x0001002F (AMD), Size: 32MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 7F7E6491E8D30494B45630BB3A8599F4E1C674C9
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x01600000-0x01FDFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 50.641s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 20.938s
Flashing Speed: 1830.11 kBit/S
Restarting MCU...
Processing rm217__07.21.image_mea4 (APE)...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Post flash tasks finished!
Flashing successfully finished!



All times are GMT +1. The time now is 08:05.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2022 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -

Page generated in 0.56863 seconds with 6 queries

SEO by vBSEO