GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Cyclonebox (https://forum.gsmhosting.com/vbb/f528/)
-   -   Put in this thread all successfull story with Cyclone-box (https://forum.gsmhosting.com/vbb/f528/put-thread-all-successfull-story-cyclone-box-709123/)

mr.luckytarun 02-14-2016 15:59

Nokia N73 flash done

[IMG]http://i.imgur.com/8vHqMZ1h.jpg[/IMG]

ibrajinja 03-22-2016 13:53

nokia 6300.RM217 unlocked
 
[Nokia USB Flashing Generic]: Port opened OK!
BB5 Unlock Failed -> Phone not detected (FBUS)
Failed to read info -> Phone not detected
Failed to read info -> Phone not detected
MCU Version V 05.00
MCU Date 27-04-07
Product RM-217 (Nokia 6300)
Manufacturer (c) Nokia.
IMEI 358051011014124
Mastercode 237141075
IMEI Spare 3A85500111101402
IMEI SV 3385500111101402F8000000
PPM V 05.00, 27-04-07, RM-217, (c) Nokia. , C
CNT Content: voda_uk, V 05.00, 27-04-07, RM-217, (c) Nokia. , ,
PSN DEG435972
Product Code 0546210
Module Code 0203166
Basic Product Code 0537040
PSD 0000000000000000
RETU 32
TAHVO 53
AHNE 11
HW 1002
RFIC 17211721
DSP pb06w14v51
BT 06cc-P9.1
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 2341500000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 23415F
Auto Selecting Flash Files on User Request...
Product Code: 0546210
This is Valid BB5 Product
No variant found with given Product Code, selecting first one
BB5 Unlock Started...
MCU Version V 05.00
MCU Date 27-04-07
Product RM-217 (Nokia 6300)
Manufacturer (c) Nokia.
IMEI 358051011014124
Mastercode 237141075
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 2341500000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 23415F
Reading Security Block...
Security block OK and saved to "RM-217_358051011014124_3222016_34812 PM.SecurityBlock.PM"
WARNING: "0CF0010C0D866B560E44ECF6C4096694A78BA59F.C0007668 " Not Exists, Will read it...
Reading CYC file from phone...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 0CF0010C0D866B560E44ECF6C4096694A78BA59F
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC: 191EC665
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
Old Loader Detected
Readed OK, Saving to "0CF0010C0D866B560E44ECF6C4096694A78BA59F.C0007668 "
Checking for Rootkey Hash support with selected Unlock Method...
Selected Unlock Method: RPL Calculation
Asking box to calculate RPL...
Received RPL from Box OK!
Writing Simlock...
Simlock ACCEPTED OK !
MCU Version V 05.00
MCU Date 27-04-07
Product RM-217 (Nokia 6300)
Manufacturer (c) Nokia.
IMEI 358051011014124
Mastercode 237141075
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 2440700000000000
Simlock Profile 8000000000000006
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Unlock finished! Time taken 14.156s

mr.luckytarun 04-05-2016 09:42

Nokia E71 direct unlock done
[IMG]http://i.imgur.com/iHVW9oRh.jpg[/IMG]

zvonee 04-06-2016 15:24

It is posible unlock nokia rm-872 with cyclone box and how?

zubairhussain 05-19-2016 21:37

BB5 Unlock Started...
MCU Version V 06wk41v59
MCU Date 22-05-08
Product RM-320 (Nokia N95 8GB)
Manufacturer (c) Nokia
IMEI 356842027229165
Mastercode 312562324
Reading Security Block...
320_356842027229165_19052016_213005.SecurityBlock. PM"
read it...
Reading CYC file from phone...
Booting CMT...
APE_SYSTEM_ASIC_ID: 24200705
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: 76ECDFDDAE0CE2BFA803A4433C655FE03DF4BC81
APE_ROOT_KEY_HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 1740000E6E740052769CA6C80C3F9A856C918EE1
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
New_RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.11.16.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
If software STUCK HERE with box TX LED lit, that means:
USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x00012C7E00006921, AMD, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
Sending Auxiliary Loader...
Auxiliary Loader Sent!
If software STUCK HERE with box TX LED lit, that means:
USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
Loader: RAPxx CommonBoot v1.06 (C) 2011 KarwosLabs
Custom loader running OK! Working...
Readed OK, Saving to "1740000E6E740052769CA6C80C3F9A856C918EE1.B0000AF0 "
Checking for Rootkey Hash support with selected Unlock Method...
Selected Unlock Method: NCK Calculation (new method)
#pw+823276189918488+1#
#pw+239781795216338+2#
#pw+042810894639317+3#
#pw+348933592213101+4#
#pw+506545910350330+5#
#pw+332096535378455+6#
#pw+502267261254039+7#
Sending NCK Codes..
NCK[1] - ACCEPTED

N95 8GB done.. easy

ibrajinja 03-30-2017 10:26

Establishing Connection with Box in Main Mode...
Handling device: [Cyclone Team], [Cyclone Bootloader], [Platform: Classic]
Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
Initializing box...
Box Firmware: Cyclone Main Application v02.20, (Aug 6 2013 20:31:40, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2012
Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
Box Serial Number: C0007668
HW Revision: B, Suitable for: Production, Case: 2011 - New Casing, MCU Manufacture Time: 2009, wk23 / wk19
Initializing security card...
Card Serial Number: D00D003C
Card Firmware Revision: 010A
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 5.03v PASSED
MCU Voltage 3.28v PASSED
Core Voltage 1.76v PASSED
VBAT Voltage 0.01v PASSED
VBAT Voltage 4.98v PASSED
Box VPP disabled
VPP Voltage 0.02v PASSED
Internal Box VPP Enabled
VPP Voltage 4.92v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
External Box VPP Enabled
VPP Voltage 0.04v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
XGold/Blackberry Service Running, Counter: 93
Lumia No TP is ACTIVATED!
Avaiable Physical Memory: 1.201GB
Avaiable Virtual Memory: 1.790GB
Avaiable Pagefile: 3.697GB
Initializing FBUS...
All initialized - Ready to work
MCU Version V 02.90
MCU Date 22-10-13
Product RM-961 (Nokia RM-961)
Manufacturer (c) Nokia
IMEI 355771068042602
Mastercode 667515143
IMEI Spare 3A55770186406200
IMEI SV 3355770186406220F3000000
PPM V 02.90, 22-10-13, RM-961, (c) Nokia, QA
PSN 78511EFBH
Product Code 059T243
Module Code 0205726
Basic Product Code 059S7H7
PSD 0000000D00000000
HW 1000
UEM 1328
UPP 2292
LCD TINAMA:BARACOAv8F, NT39121
ADSP Sw p'V 02.90\n22-10-13\nRM-961\n(c) NMP\nqa
Asic 11
HW Signature 2AE8D019F3EC20A5
Simlock Server
Simlock Key 0010100000000000
Simlock Profile 0000000000040002
Simlock Aux 000B0000
Simlock IMEI 00003557710680426000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Auto Selecting Flash Files on User Request...
Product Code: 059T243
No Flash Datapackage installed for this Phone!
Security Code 19912
Attempts 02
Security Code



..+$ Henry.$.;o
Security code was resetted to 12345
Security Code 12345
Attempts 02
Security Code 12345
Security code was resetted to 12345
Setting factory defaults of: Factory set full
Factory defaults set OK

ruport 06-02-2017 05:59

Nokia 2680s-2b RM-500 Unlock Done
 
Setting Local Mode...
Local mode Set
Asic 11
HW Signature 270940B661D6BA65
Simlock Server SIMLOCK SERVER
Simlock Key 3101700000000000
Simlock Profile 800000000003000B
Simlock Aux 000B5555
Simlock IMEI 00550117410003769200
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: 7FFF6F07FFFFFFFF @ FC00 Data: 310150
Simlock [2,1] State: CLOSED Type: 7FFF6F07FFFFFFFF @ FC00 Data: 310170
Simlock [3,1] State: CLOSED Type: 7FFF6F07FFFFFFFF @ FC00 Data: 311180
Simlock [4,1] State: CLOSED Type: 7FFF6F07FFFFFFFF @ FC00 Data: 310410
Simlock [5,1] State: CLOSED Type: 7FFF6F07FFFFFFFF @ FC00 Data: 310980
Autodetecting SP Type...
Autodetection Finished
Proceeding with RSA Unlock...
Asking card to sign HW Signature...
Signed OK (51D557CCA9FA8244A6A62CFB2DFCF5DAB85A734E)
Calculating SP...
Writing SP...
New SP Accepted OK!
Phone unlocked OK!

Cyclone Box Dead but not gone :):D:):D;)

ru.mobile 06-23-2018 16:04

Nokia 2630 RM-298 unlock Cyclone
 
MCU Version V 06.82
MCU Date 26-09-08
Product RM-298 (Nokia 2630 (Asia/Europe) CABLE 2630)
Manufacturer (c) Nokia
IMEI 359305020800306
Mastercode 632464477
Setting Local Mode...
Failed to set Local Mode, Trying to unlock anyway...
Asic 11
HW Signature 5E3E70723A3FC87B
Simlock Server SIMLOCK SERVER
Simlock Key 2200500010013120
Simlock Profile 800000000001000B
Simlock Aux 000B5555
Simlock IMEI 00553593050208003000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 22005F
Autodetecting SP Type...
Autodetection Finished
Proceeding with RSA Unlock...
Asking card to sign HW Signature...
Signed OK (9B5D61CC268E64E33F150B5E66B9D2E6A73C73B6)
Calculating SP...
Writing SP...
New SP Accepted OK!
Phone unlocked OK!

fokal2008 08-29-2018 15:20

NOKIA 6210S-1 NAVIGATOR NETWORK UNLOCK DONE BY CYCLONE DEAD BOX
https://s15.postimg.cc/ozaal2dhn/screenshot_262.png


Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.12.8.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0040 (Samsung), Size: 256MBytes, VPP: Not Supported
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.12.8.0, Algo: XSR 1.5
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Sending User Abort Signal...
Prepare phone failed with message -> Failed to set CMT Transmission Mode
CBUS Request Error -> User abort
Failed to Check BB5 Flashing Bus -> Failed to Boot / Prepare Phone
Booting CMT...
Failed to Boot CMT -> CMT Not Responding, Phone or Cable problem
Prepare phone failed with message -> Failed to Boot CMT
Failed to Check BB5 Flashing Bus -> Failed to Boot / Prepare Phone
Booting CMT...
Failed to Boot CMT -> CMT Not Responding, Phone or Cable problem
Prepare phone failed with message -> Failed to Boot CMT
Failed to Check BB5 Flashing Bus -> Failed to Boot / Prepare Phone
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 165001149B79005280B973478C621EFCA96511E4
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.12.8.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0040 (Samsung), Size: 256MBytes, VPP: Not Supported
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.12.8.0, Algo: XSR 1.5
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 4AA07663215C623237BF8A43EC71D55819B7DC6E
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 165001149B79005280B973478C621EFCA96511E4
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.12.8.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0040 (Samsung), Size: 256MBytes, VPP: Not Supported
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.12.8.0, Algo: XSR 1.5
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 4AA07663215C623237BF8A43EC71D55819B7DC6E
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Sending BB5 NCK Code...
NCK[1] - ACCEPTED
Sending BB5 NCK Code...
NCK[1] - Unlocked Already

fokal2008 08-29-2018 15:20

NOKIA 6210S-1 NAVIGATOR NETWORK UNLOCK DONE BY CYCLONE DEAD BOX
https://s15.postimg.cc/ozaal2dhn/screenshot_262.png


Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.12.8.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0040 (Samsung), Size: 256MBytes, VPP: Not Supported
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.12.8.0, Algo: XSR 1.5
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Sending User Abort Signal...
Prepare phone failed with message -> Failed to set CMT Transmission Mode
CBUS Request Error -> User abort
Failed to Check BB5 Flashing Bus -> Failed to Boot / Prepare Phone
Booting CMT...
Failed to Boot CMT -> CMT Not Responding, Phone or Cable problem
Prepare phone failed with message -> Failed to Boot CMT
Failed to Check BB5 Flashing Bus -> Failed to Boot / Prepare Phone
Booting CMT...
Failed to Boot CMT -> CMT Not Responding, Phone or Cable problem
Prepare phone failed with message -> Failed to Boot CMT
Failed to Check BB5 Flashing Bus -> Failed to Boot / Prepare Phone
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 165001149B79005280B973478C621EFCA96511E4
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.12.8.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0040 (Samsung), Size: 256MBytes, VPP: Not Supported
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.12.8.0, Algo: XSR 1.5
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 4AA07663215C623237BF8A43EC71D55819B7DC6E
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 165001149B79005280B973478C621EFCA96511E4
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.12.8.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0040 (Samsung), Size: 256MBytes, VPP: Not Supported
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.12.8.0, Algo: XSR 1.5
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 4AA07663215C623237BF8A43EC71D55819B7DC6E
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Sending BB5 NCK Code...
NCK[1] - ACCEPTED
Sending BB5 NCK Code...
NCK[1] - Unlocked Already

fokal2008 02-08-2019 10:47

NOKIA 7510a-b RM399 SUPERNOVA UNLOCKED DONE
Code:

CMT_EM_ASIC_ID:                00000295
CMT_EM_ASIC_ID:                00000B22
CMT_PUBLIC_ID:                08A00113CB2D7F568269E7477C4438B19FEE09B1
CMT_ASIC_MODE_ID:        00
CMT_ROOT_KEY_HASH:        9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC:        273F6D55
CMT_SECURE_ROM_CRC:        DFAAF68F
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 34F71CF6D1FC422794671654A7A95308F55F71E6
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
BB5 Unlock Started...
MCU Version        V 03.60
MCU Date        18-11-08
Product                RM-399 (Nokia 7510 Supernova)
Manufacturer        (c) Nokia           
IMEI                359321022000456
Mastercode        6742542427
Simlock Server        SIMLOCK SERVER
Simlock Key        3102000000000000
Simlock Profile        8000000000000000
Simlock Key Cnt        0
Simlock FBUS Cnt        0
Simlock [1,1]        State: CLOSED        Type: 7FFF6F07FFFFFFFF @ FC00        Data: 310160
Simlock [2,1]        State: CLOSED        Type: 7FFF6F07FFFFFFFF @ FC00        Data: 310200
Simlock [3,1]        State: CLOSED        Type: 7FFF6F07FFFFFFFF @ FC00        Data: 310210
Simlock [4,1]        State: CLOSED        Type: 7FFF6F07FFFFFFFF @ FC00        Data: 310220
Simlock [5,1]        State: CLOSED        Type: 7FFF6F07FFFFFFFF @ FC00        Data: 310230
Simlock [6,1]        State: CLOSED        Type: 7FFF6F07FFFFFFFF @ FC00        Data: 310240
Simlock [7,1]        State: CLOSED        Type: 7FFF6F07FFFFFFFF @ FC00        Data: 310250
Simlock [8,1]        State: CLOSED        Type: 7FFF6F07FFFFFFFF @ FC00        Data: 310260
Simlock [9,1]        State: CLOSED        Type: 7FFF6F07FFFFFFFF @ FC00        Data: 310270
Simlock [10,1]        State: CLOSED        Type: 7FFF6F07FFFFFFFF @ FC00        Data: 310310
Simlock [11,1]        State: CLOSED        Type: 7FFF6F07FFFFFFFF @ FC00        Data: 310580
Simlock [12,1]        State: CLOSED        Type: 7FFF6F07FFFFFFFF @ FC00        Data: 310660
Simlock [13,1]        State: CLOSED        Type: 7FFF6F07FFFFFFFF @ FC00        Data: 310800
Simlock [14,1]        State: CLOSED        Type: 7FFF6F07FFFFFFFF @ FC00        Data: 310490
Reading Security Block...
Security block OK and saved to "RM-399_359321022000456_08022019_103416.SecurityBlock.PM"
WARNING: "08A00113CB2D7F568269E7477C4438B19FEE09B1.C000324E" Not Exists, Will read it...
Reading CYC file from phone...
Booting CMT...
CMT_SYSTEM_ASIC_ID:        000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:                00000295
CMT_EM_ASIC_ID:                00000B22
CMT_PUBLIC_ID:                08A00113CB2D7F568269E7477C4438B19FEE09B1
CMT_ASIC_MODE_ID:        00
CMT_ROOT_KEY_HASH:        9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC:        273F6D55
CMT_SECURE_ROM_CRC:        DFAAF68F
CMT Ready!
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
Old Loader Detected
Readed OK, Saving to "08A00113CB2D7F568269E7477C4438B19FEE09B1.C000324E"
Checking for Rootkey Hash support with selected Unlock Method...
Selected Unlock Method: NCK Calculation (new method)
#pw+566590792563981+1#
#pw+885883348932379+2#
#pw+342142749029096+3#
#pw+461455815954888+4#
#pw+436713475831741+5#
#pw+459741718565771+6#
#pw+810625554130339+7#
Sending User Abort Signal...
CBUS Request Error -> User abort
BB5 Unlock Failed -> Phone not detected (FBUS)
Database Unlock Started...
Sending User Abort Signal...
CBUS Request Error -> User abort
Database Unlock Failed -> Phone not detected


fokal2008 02-14-2019 17:16

NOKIA 6085 UNLOCK DONE
https://i.postimg.cc/sfwdb07R/screenshot-367.png

fokal2008 02-21-2019 16:59

Nokia 5310 xpress music unlock done
 
NOKIA 5310 XPRESS MUSIC UNLOCK DONE
Code:

Simlock FBUS Cnt        0
Simlock [1,1]        State: CLOSED        Type: MCC-MNC        Data: 20820F
Reading Security Block...
Security block OK and saved to "RM-303_356817026407806_21022019_151400.SecurityBlock.PM"
WARNING: "1740020499825750D541D61679942BB3A924B769.C000324E" Not Exists, Will read it...
Reading CYC file from phone...
Booting CMT...
[Nokia 5310 XpressMusic USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia 5310 XpressMusic USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia 5310 XpressMusic USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia 5310 XpressMusic USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia 5310 XpressMusic USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia 5310 XpressMusic USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia 5310 XpressMusic USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
Failed to Boot CMT -> Failed to get First Boot Block
Prepare phone failed with message -> Failed to Boot CMT
Neither CYC file and exists or failed to read it from phone (Failed to Boot / Prepare Phone)
BB5 Unlock Failed -> Failed to obtain Phone Unique Data
Booting CMT...
CMT_SYSTEM_ASIC_ID:        000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:                00000295
CMT_EM_ASIC_ID:                00000B22
CMT_PUBLIC_ID:                1740020499825750D541D61679942BB3A924B769
CMT_ASIC_MODE_ID:        00
CMT_ROOT_KEY_HASH:        BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC:        273F6D55
CMT_SECURE_ROM_CRC:        DFAAF68F
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC220C (Samsung), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 3E96DE4212587183E5E16BB2C79692A53C19875D
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
BB5 Unlock Started...
MCU Version        V 10.10
MCU Date        23-03-09
Product                RM-303 (Nokia 5310 XpressMusic)
Manufacturer        (c) Nokia           
IMEI                356817026407806
Mastercode        706127070
Simlock Server        SIMLOCK SERVER
Simlock Key        2082000000000000
Simlock Profile        8000000000000000
Simlock Key Cnt        0
Simlock FBUS Cnt        0
Simlock [1,1]        State: CLOSED        Type: MCC-MNC        Data: 20820F
Reading Security Block...
Security block OK and saved to "RM-303_356817026407806_21022019_151908.SecurityBlock.PM"
WARNING: "1740020499825750D541D61679942BB3A924B769.C000324E" Not Exists, Will read it...
Reading CYC file from phone...
Booting CMT...
CMT_SYSTEM_ASIC_ID:        000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:                00000295
CMT_EM_ASIC_ID:                00000B22
CMT_PUBLIC_ID:                1740020499825750D541D61679942BB3A924B769
CMT_ASIC_MODE_ID:        00
CMT_ROOT_KEY_HASH:        BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC:        273F6D55
CMT_SECURE_ROM_CRC:        DFAAF68F
CMT Ready!
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
Old Loader Detected
Readed OK, Saving to "1740020499825750D541D61679942BB3A924B769.C000324E"
Checking for Rootkey Hash support with selected Unlock Method...
Selected Unlock Method: NCK Calculation (new method)
#pw+755687876907138+1#
#pw+238860665652205+2#
#pw+735933655806935+3#
#pw+787393243829795+4#
#pw+367358764470471+5#
#pw+765024993352902+6#
#pw+114177609010883+7#
Sending NCK Codes..
NCK[1] - ACCEPTED
NCK[2] - Too fast between tries (bruteforce protection)
NCK[3] - Too fast between tries (bruteforce protection)
NCK[4] - Too fast between tries (bruteforce protection)
NCK[5] - Too fast between tries (bruteforce protection)
NCK[6] - Too fast between tries (bruteforce protection)
NCK[7] - Too fast between tries (bruteforce protection)
MCU Version        V 10.10
MCU Date        23-03-09
Product                RM-303 (Nokia 5310 XpressMusic)
Manufacturer        (c) Nokia           
IMEI                356817026407806
Mastercode        706127070
Simlock Server        SIMLOCK SERVER
Simlock Key        2082000000000000
Simlock Profile        8000000000000000
Simlock Key Cnt        0
Simlock FBUS Cnt        0
Simlock [1,1]        State: OPENED        Type: MCC-MNC        Data: 20820F
Simlock NCK        #pw+755687876907138+1#
Unlock finished! Time taken 10.110s

https://i.postimg.cc/0yK6XWtC/screenshot-372.png

CelularCris 05-24-2019 07:07

Is the support still alive?


All times are GMT +1. The time now is 08:40.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2022 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -

Page generated in 0.30381 seconds with 6 queries

SEO by vBSEO